Industrial Power Supplies Enduring High Quality Products
24 Volt Industrial Din Rail 120W to 480W Description: With built-in PFC 85% - 90% efficiency 60% power boost ability 23.5V to 29V adjustable output range Parallel operation: SNP-D129 & SNP-D249 by optional module ; SNP-D489 built-in Patented Ring-Free ZVS & Active PFC SNP-D129 * single phase * universal * 24V/5A, SNP-D249 * single phase * universal * 24V/10A, SNP-D489 * single phase * universal * 24V/20A SNP-D129 24V / 5A 120W SNP-D249 24V / 10A 240W SNP-D489 24V / 20A 480W
Switching Adapter SNP-POE Series / SNP-POEX-3 Series Description: SNP-POE series is an adapter for Ethernet application. It delivers power to end device through four idle line of Ethernet cable. To prevent the tiny signal line get hurt, the rated current allowed is 350mA, the trip point of over current protection is around 450mA. At no load condition, this series meets green power regulation. * SNP-POE7/-3 for12v/0.35a * SNP-POE9/-3 for 24V/0.35A * SNP- POET/-3 for 48V/0.35A SNP-A03x(-3) Series Description: * IEC320 C6 or C8 Input Socket * With ITE safety * Compatible to Class I/II safety & EMC * No Load Input Power < 0.5W * SNP-A03C for 9V/3.3A * SNP-A03C-3 for 9V/3.3A * SNP-A037 for 12V/2.5A * SNP-A037-3 for 12V/2.5A * SNP-A038 for 15V/2A * SNP- A038-3 for 15V/2A * SNP-A039 for 24V/1.3A * SNP-A039-3 for 24V/1.3A * SNP-A03T for 48V/0.75A * SNP-A03T-3 for 48V/0.75A SNP-A06 Series Description: * IEC320 C8 Input Socket * With ITE & Medical safety * Compatible to Class II safety & EMC * No load input power < 1W * SNP-A067 for 12V/4.2A * SNP-A068 for 15V/3.6A * SNP-A069 for 24V/2.5A * SNP-A06T for 48V/1.25A SNP-A08 Series Description: * IEC320 C14 or C18 Input Socket * With Medical safety * CEC level IV compliant * Compatible to Class I/II safety & EMC * No load input power < 0.3W * SNP-A087(-3) for 12V/6A * SNP-A088(-3) for 15V/5A * SNP-A085(-3) for 18V/4.5A * SNP-A089(-3) for 24V/3.3A * SNP-A08T(-3) for 48V/1.75A SNP-A12 Series / SNP-A12x-M Series Description: * External Desktop Adaptor * With ITE & Medical (-M) safety * Built-in active PFC * Efficiency between 84% to 87% * Compatible to Class I safety & EMC * SNP-A127 for 12V/9A * SNP-A127-M for 12V/9A * SNP-A128 for 15V/7.5A * SNP-A128-M for 15V/7.5A * SNP-A125 for 18V/6.5A * SNP- A125-M for 18V/6.5A * SNP-A129 for 24V/5A * SNP-A129-M for 24V/5A * SNP-A12T for 48V/2.5A * SNP-A12T-M for 48V/2.5A
Switching Adapter SNP-PA5 Series Description: * External Desktop Adaptor * With ITE safety * Compatible to Class I safety & EMC * SNP-PA51 for 5V/3A, 12V/2.5A, -12V/0.3A * SNP-PA53 for 5V/3.5A, 12V/2.5A * SNP-PA54 for 5V/3A, 15V/1.5A, -15V/0.3A * SNP-PA5C for 9V/5A * SNP-PA55 for 18V/3A * SNP-PA57 for 12V/4.2A * SNP-PA58 for 15V/3.5A * SNP-PA58-C for 13.8V/3.5A * SNP-PA59 for 24V/2.3A * SNP-PA5T for 48V/1.1A
General Purpose Features : With ITE safety With power on LED With output adjustable trimmer Efficiency between 75% to 85% Operation from -20 to 70 degree C by convection SNP-C03 Series Rated 30W Peak 45W SNP-C03B for 3.3V/6A SNP-C036 for 5V/6A SNP-C037 for 12V/2.5A SNP-C038 for 15V/2A SNP-C039 for 24V/1.3A SNP-C03T for 48V/0.63A SNP-C06 Series Rated 60W Peak 90W SNP-C06B for 3.3V/15A SNP-C066 for 5V/10A SNP-C067 for 12V/5A SNP-C068 for 15V/4A SNP-C069 for 24V/2.5A SNP-C06T for 48V/1.3A SNP-C063 for 5V/6A, 12V/2A SNP-C06A for 5V/4A, 24V/1.5A SNP-C060 for 5V/5A, 12V/1.5A, -12V/0.5A, -5V/0.5A SNP-C064 for 5V/5A, 15V/1.2A, -15V/0.5A, -5V/0.5A SNP-C06F for 5V/3A, 12V/0.9A, 24V/0.9A, -12V/0.5A SNP-C08 Series Rated 80W Peak 120W SNP-CO8B for 3.3V/17A SNP-C086 for 5V/14A SNP-C087 for 12V/7A SNP-C088 for 15V/5.3A SNP-C089 for 24V/3.3A SNP-C08T for 48V/1.7A SNP-C083 for 5V/7A, 12V/3A SNP-C08A for 5V/5A, 24V/2A SNP-C080 for 5V/6A, 12V/2.5A, -12V/0.5A, -5V/0.5A SNP-C084 for 5V/6A, 15V/2A, -15V/0.5A, -5V/0.5A SNP-C08F for 5V/4A, 12V/1.5A, 24V/1A, -12V/0.5A
AC/DC DIN Rail mountable power supply DRA18 Features: AC/DC DIN Rail mountable power supply UL/cUL/TUV/CE Universal input 90~264VAC High efficiency up to 77% Short circuit protection Internal input filter 3 years warranty CASE SIZE 90 x 22.5 x 114mm ( 3.6 x 0.89 x 4.49 inches ) CASE MATERIAL WEIGHT Plastic 150g MODEL NO. INPUT WATTAGE CURRENT (min.) (typ.) *** Single Output Models *** DRA18-05 90~264 VAC 15 WATTS + 5 VDC 3000 ma 73% 75% DRA18-12 90~264 VAC 18 WATTS + 12 VDC 1500 ma 75% 77% DRA18-15 90~264 VAC 18 WATTS + 15 VDC 1200 ma 75% 77% DRA18-24 90~264 VAC 18 WATTS + 24 VDC 750 ma 75% 77% DRA18-05A 90~264 VAC 15 WATTS + 5 VDC 3000 ma 73% 75% DRA18-12A 90~264 VAC 18 WATTS + 12 VDC 1500 ma 75% 77% DRA18-15A 90~264 VAC 18 WATTS + 15 VDC 1200 ma 75% 77% DRA18-24A 90~264 VAC 18 WATTS + 24 VDC 750 ma 75% 77%
AC/DC DIN Rail mountable power supply DRAN60 Features: AC/DC DIN Rail mountable power supply Universal input 85~264VAC High efficiency up to 89% Short circuit protection Internal input filter 3 years warranty CASE SIZE 90 x 40.5 x 114mm ( 3.6 x 1.59 x 4.49 inches ) CASE MATERIAL WEIGHT Plastic 340g MODEL NO. INPUT WATTAGE CURRENT (min.) (typ.) *** Single Output Models *** DRAN60-05 85~264 VAC 50 WATTS + 5 VDC 10000 ma 77% 79% DRAN60-12 85~264 VAC 60 WATTS + 12 VDC 5000 ma 84% 86% DRAN60-24 85~264 VAC 60 WATTS + 24 VDC 2500 ma 86% 89% DRAN60-48 85~264 VAC 60 WATTS + 48 VDC 1250 ma 86% 89% DRAN60-05A 85~264 VAC 50 WATTS + 5 VDC 10000 ma 77% 79% DRAN60-12A 85~264 VAC 60 WATTS + 12 VDC 5000 ma 84% 86% DRAN60-24A 85~264 VAC 60 WATTS + 24 VDC 2500 ma 86% 89% DRAN60-48A 85~264 VAC 60 WATTS + 48 VDC 1250 ma 86% 89%
AC/DC DIN Rail mountable power supply DRA100 Features: AC/DC DIN Rail mountable power supply Universal input 90~264VAC High efficiency up to 88% Short circuit protection Internal input filter 3 years warranty CASE SIZE CASE MATERIAL WEIGHT Screw Terminal Type: 90 x 54x 114mm ( 3.6 x 2.13 x 4.49 inches ) Plastic 430g MODEL NO. INPUT WATTAGE CURRENT (min.) (typ.) *** Single Output Models *** DRA100-12A 90~264 VAC 100.8 WATTS + 12 VDC 8.4 A 82% 84% DRA100-24A 90~264 VAC 100.8 WATTS + 24 VDC 4.2A 84% 86% DRA100-24AL 90~264 VAC 91.2 WATTS + 24 VDC 3.8 A 83% 85% DRA100-48A 90~264 VAC 100.8 WATTS + 48 VDC 2.1 A 86% 88%
AC/DC DIN Rail mountable power supply DRAN120 Features: AC/DC DIN Rail mountable power supply Compact design High efficiency up to 87% P.F.C. function available Parallel function available (switch) Input voltage 115/230VAC auto select 3 years warranty CASE SIZE CASE MATERIAL WEIGHT Screw Terminal Type: 124.5 x 64 x 123.6mm ( 4.9 x 2.52 x 4.87 inches ) Detachable Connector Type: 143.5 x 64 x 123.6mm ( 5.65 x 2.52 x 4.87 inches ) Metal 920g MODEL NO. INPUT WATTAGE CURRENT (min.) (typ.) *** Single Output Models *** DRAN120-12x 115/230 VAC 120 WATTS + 12 VDC 10 A 82% 84% DRAN120-24x 115/230 VAC 120 WATTS + 24 VDC 5 A 84% 86% DRAN120-24xL 115/230 VAC 91.2 WATTS + 24 VDC 3.8 A 83% 85% DRAN120-48x 115/230 VAC 120 WATTS + 48 VDC 2.5 A 85% 87%
AC/DC DIN Rail mountable power supply DRA240 Features: AC/DC DIN Rail mountable power supply Compact design High efficiency up to 90% P.F.C. function available Parallel function available (switch) Input voltage 115/230VAC auto select 3 years warranty CASE SIZE CASE MATERIAL WEIGHT Screw Terminal Type: 124.5 x 83.5 x 123.6mm ( 4.9 x 3.29 x 4.87 inches ) Detachable Connector Type: 143.5 x 83.5 x 123.6mm ( 5.65 x 3.29 x 4.87 inches) Metal 1380g MODEL NO. INPUT WATTAGE CURRENT (min.) (typ.) *** Single Output Models *** DRA240-24x 115/230 VAC 240 WATTS + 24 VDC 10 A 87% 89% DRA240-48x 115/230 VAC 240 WATTS + 48 VDC 5 A 88% 90%
AC/DC DIN Rail mountable power supply DRA480 Features: AC/DC DIN Rail mountable power supply Compact design High efficiency up to 90% Active P.F.C. function Parallel function available (switch) Universal input voltage 3 years warranty CASE SIZE CASE MATERIAL WEIGHT Screw Terminal Type: 124.5 x 175.5 x 123.6mm ( 4.9 x 6.91 x 4.87 inches ) Detachable Connector Type: 143.5 x 175.5 x 123.6mm ( 5.65 x 6.91 x 4.87 inches) Metal 1920g MODEL NO. INPUT WATTAGE CURRENT (min.) (typ.) *** Single Output Models *** DRA480-24x 90~264 VAC 480 WATTS + 24 VDC 20 A 86% 89% DRA480-48x 90~264 VAC 480 WATTS + 48 VDC 10 A 87% 90%
Type EGPT Stabilized DC power supplies, primary switch mode (slim shape) Application Control circuits, switchgear equipment, PLCs, etc. are supplied safely by these DC power supplies even under adverse conditions. If two power supplies with the same rated current and output voltage are connected in parallel, a very good power (weight ratio) is obtained (small size, low weight).
Construction For DIN rail TS 35 (DIN EN 50022) Safety: VDE 0805/EN 60950/IEC 950 Permanently resistant to short circuit and Interference emission: EN 61000-6 -3/-4, (class B) permanently stable at no load Interference immunity: EN 61000-6 -1/-2 High efficiency PFC norm: (harmonics) EN 61000-3-2 class A Specifications 1,25 A 2 A Article no.: 750-0012 750-0020* Input voltage: 94-265 VAC / 135-370 VDC 94-265 VAC / 135-370 VDC Wide range input Wide range input Frequency: 47-63 Hz 47-63 Hz Rated input current: 0,35 A at 230 V AC 0,6 A at 230 VAC AC Starting current inrush: < 1.5 A2s < 1.5 A2s Output voltage SELV 24 V ± 3% DC DC 24 V ± 3% DC DC Output current: 0-1.25 A DC 0-2 A DC DC Output power: 30 W (max.) 48 W (max.) Ripple: Ripple: < 50 mv < 50 mv Ripple: < 50 mv < 50 mv Current limitation typ.: 1.5 A (permanently short circuit resistant) 2.5 A (permanently short circuit resistant) Protection class: II II Protection index: IP 20 IP 20 Efficiency typ.: 85% 89% Mains buffering: > 80 ms / 230 V AC 70 ms / 230 V AC > 15 ms / 115 VAC > 8 ms / 115 V AC > 10 ms / 120 V AC Temperature range 0 to 70 C (free convection) -10 C to +70 C (free convection) Leakage current: < 0.25 ma (at 47-63 Hz) Load control: < 0.5% at 0 A to INenn Mains regulation: < 0.2% at Uein ±15% Dynamic response: < 2 ms at 10-90% INenn /overshoot < 2% Overload resistant yes Stable at no load: yes Output derating: 2,5 % / K from + 60 C Storage temperature: - 25 C to + 85 C Mounting position: wall-mounted, Input terminals up Overview Type Article no. Line voltage V Output voltage V (DC) Total current A (DC) Totalweight appr. kg Dimensions a b c approx. mm EGPT 2401,25 750-0012 230 24 1.25 0.2 45 105 72 EGPT 2402 750-0020 230 24 2.0 0.2 45 105 72
Type EGPT Cosmo Stabilized DC power supplies primary switch mode (slim shape) Application Control circuits, switchgear equipment, PLCs, etc. are supplied safely by these DC power supplies even under adverse conditions. Two power supplies with the same rated current and output voltage can be connected. Floating operation with battery at half the rated current and thus uninterruptible power supply is also possible. a very good power density (weight ratio) is obtained (small size, low weight).
Construction For DIN rail TS 35 (DIN EN 50022) Overload indicator (LED) Permanently resistant to short circuit and permanently stable at no load Safety: VDE 0805/EN 60950/IEC 950 Interference emission: EN 61000-6 -3/-4, (class B) High efficiency Interference immunity: EN 61000-6 -1/-2 Status indicator (LED) PFC norm: (harmonics) EN 61000-3-2 class A Specifications 5A 10 A 20 A Article no.: 751-2405 751-2410 751-2420* Input voltage: 115/230 V AC (265-370 V DC )** 115/230 V AC (265-370 V DC )** 230 V AC Input voltage range: 93-132 V AC ; 187-265 V AC 93-132 V AC ; 187-265 V AC 195-265 V AC Frequency: 47-63 Hz 47-63 Hz 47-63 Hz Rated input current: 0.9 A at 230 V AC 1.8 A at 230 V AC 3.3 A at 230 V AC Starting current inrush: < 30 A < 30 A < 30 A (at 230 V AC ) Power factor: 0.5 capacitive/230 V AC 0.5 capacitive/230 V AC 0.82 capacitive/230 V AC Output voltage SELV 24 V DC ± 1% 24 V DC ± 1% 24 V DC ± 1% Setting range typ.: 22-30 V 22-30 V 23-29 V Output current: 0-5 A DC 0-10 A DC 0-20 A DC Output power: 120 W (max.) 240 W (max.) 480 W (max.) Ripple: < 50 mv < 50 mv < 50 mv Current limitation typ.: 6 A (permanently short circuit resistant) 12 A (permanently short circuit resistant) 22 A (permanently short circuit resistant) Protection class: I I I Protection index: IP 20 IP 20 IP 20 Efficiency typ.: 89% 90% 89% Mains buffering: > 20 ms / 230 V AC > 35 ms / 230 V AC > 20 ms / 230 V AC > 15 ms / 115 V AC > 30 ms / 115 V AC Temperature range -10 to 70 C -10 to 70 C -10 to 70 C (free convection) (free convection) (free convection) Leakage current: < 0.75 ma (at 47-63 Hz) < 3.5 ma (at 47-63 Hz) < 3.5 ma (at 47-63 Hz) Load control: < 1% at 0 A to I nom < 1% at 0 A to I nom < 1% at 0 A bis I nom Mains regulation: < 0.2% at U on ± 15% < 0.2% at U on ± 15% < 0.2% at U on ± 15% Dynamic response: < 2 ms at 10-90% I nom < 2 ms at 10-90% I nom < 2 ms at 10-90% I n om Overshoot < 2% Overshoot < 2% Overshoot < 2% Overload resistant: yes yes yes Stable at no load: yes yes yes Output derating: 2,5% / K at +60 C 2,5% / K at +60 C 2,5% / K at +60 C Storage temperature: -25 C to + 85 C -25 C to + 85 C -25 C to + 85 C Mounting position: wall-mounted, wall-mounted, wall-mounted, input terminals up input terminals up input terminals up Overview Type Article no. Line voltage V Output voltage V (DC) Total current A (DC) Totalweight appr. kg Dimensions a b c approx. mm EGPT cosmo 2405 751-2405 230 24 5 0.9 70 139 132 EGPT cosmo 2410 751-2410 230 24 10 1.1 70 164 147.5 EGPT cosmo 2420* 751-2420 230 24 20 2.0 86 173 227
Type EGPT Competent Stabilized DC power supplies primary switch mode (flat shape) Application Control circuits, switchgear equipment, PLCs, etc. are supplied safely by these DC power supplies even under adverse conditions. Two power supplies with the same rated current and output voltage can be connected. Floating operation with battery at half the rated current and thus uninterruptible power supply is also possible. a very good power density (weight ratio) is obtained (small size, low weight).
Construction For DIN rail TS 35 (DIN EN 50022) Safety: VDE 0805/EN 60950/IEC 950 Permanently resistant to short circuit and permanently stable at no load High efficiency Interference emission: EN 61000-6 -3/-4, (class B) Interference immunity: EN 61000-6 -1/-2 Specifications 2,5A 5A 10 A 20 A Article no.: 750-0025 750-0050 750-0001 750-0002 Input voltage: 94-265 V AC / 135-370 V DC wide range input 94-265 V AC / 135-370 V DC wide range input 115/230 V AC ± 15%** switchable (soldering jumper) 230 V AC ± 15% Frequency 47-63 Hz 47-63 Hz 47-63 Hz 47-63 Hz Rated input current: 0.6 A at 230 V AC 1.23 A at 230 V AC 2.25 A at 230 V AC 4.2 A at 230 V AC Starting current inrush: < 30 A < 30 A < 30 A < 30 A Power factor: 0.52 capacitive/230 V AC 0.52 capacitive/230 V AC 0.52 capacitive/230 V AC 0.52capacitive/230 V AC Output voltage SELV: 24 VDC ± 1% 24 VDC ± 1% 24 VDC ± 1% 24 VDC ± 1% Setting range, typ.: 22.5-27.5 V 22.5-27.5 V 22.5-27.5 V 22.5-27.5 V Output current: 0-2.5 ADC 0-5 ADC 0-10 ADC 0-20 ADC Output power: 60 W (max.) 120 W (max.) 240 W (max.) 480 W (max.) Ripple: < 100 mv < 100 mv < 100 mv < 100 mv Current limitation typ.: 3 A (permanently short circuit resistant) 6 A (permanently short circuit resistant) 12.5 A (permanently short circuit resistant) 25 A (permanently short circuit resistant) Protection class: I I I I Protection index: IP 20 IP 20 IP 20 IP 20 Efficiency typ.: 86% 86% 89% 88% Mains buffering: > 80 ms / 230 V AC > 80 ms / 230 V AC > 80 ms / 230 V AC > 15 ms / 230 V AC > 15 ms / 115 V AC > 15 ms / 115 V AC Temperature range: 0 to 70 C (free convection) 0 to 70 C (free convection) 0 to 70 C (free convection) 0 to 70 C (free convection) Leakage current: < 0.75 ma (at 47-63 Hz) < 0.75 ma (at 47-63 Hz) < 0.75 ma (at 47-63 Hz) < 3.5 ma (at 47-63 Hz) Load control: < 1% at 0 A to I nom < 1% at 0 A to I nom < 1% at 0 A to I nom < 1% at 0 A to I nom Mains regulation: < 0.2% at U on ± 15% < 0.2% at U on ± 15% < 0.2% at U on ± 15% < 0.2% at U on ± 15% Dynamic response: < 2 ms at 10-90% I nom < 2 ms at 10-90% I nom < 2 ms at 10-90% I nom < 2 ms at 10-90% I nom Overshoot < 2% Overshoot < 2% Overshoot < 2% Overshoot < 2% Overload resistant: yes yes yes Stable at no load: yes yes yes Output derating: 2,5% / K at +60 C 2,5% / K at +60 C 2,5% / K at +60 C 2,5% / K at +60 C Storage temperature: -25 C to + 85 C -25 C to + 85 C -25 C to + 85 C -25 C to + 85 C Mounting position: Overview wall-mounted, input terminals up Type Article no. Line voltage V wall-mounted, input terminals up Output voltage V (DC) Total current A (DC) wall-mounted, input terminals up Totalweight appr. kg wall-mounted, input terminals up Dimensions a b c approx. mm EGPT 2402.5 750-0025 230 24 2.5 0.6 123 105 65 EGPT 2405 750-0050 230 24 5 0.8 123 105 86 EGPT 2410 750-00015 230 24 10 1.2 123 105 86 EGPT 2420* 750-0002 230 24 20 1.9 153 130 86
Dewar Electronics Pty Ltd is a 100% privately owned Australian company, established in March 1972. To complement its manufactured products, Dewar also distributes a range of quality intelligent electronic devices, switches and power supplies from various sources worldwide. As a valued customer, you can trust Dewar to meet your product needs through the delivery of quality, reliable products, solutions and services. Enduring High Quality Products Dewar Electronics Pty. Ltd. 32 Taylors Road, Croydon, Victoria 3136 Australia Phone: +61 3 9725 3333 Fax: +61 3 9725 6003 Email: sales@dewar.com.au www.dewar.com.au