DATA SHEET: DomiLED DomiLED Synonymous with function and performance, the DomiLED series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness. Features: > High brightness surface mount LED using thin film technology. > 120 viewing angle. > Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. > Qualified according to JEDEC moisture sensitivity Level 2. > Compatible to both IR reflow soldering. > Environmental friendly; RoHS compliance. > Compliance to automotive standard; AEC-Q101. > Superior Corrosion Resistance Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Automotive : exterior applications, eg: Turn Signal, Center Mount Stop Light (CHMSL), Rear Combination Lamp (RCL) > Signage: full colour display video notice board, signage, special effect lighting. 2005 DomiLED is a trademark of. All rights reserved. Product specifications are subject to change without notice. 1
Optical Characteristics at Tj=25 C Part Ordering Number Color Viewing Angle Luminous Intensity @ IF = 30mA IV (mcd) Min. Typ. Max. Appx. 1.1 DRS-MKS-VW2-1 DRY-MKS-W2X-1 Super Red, 632nm Yellow, 587nm 120 120 715.0 1400.0 1400.0 2240.0 1800.0 2850.0 Electrical Characteristics at Tj=25 C Part Number Min. (V) Appx. 3.1 Vf @ If = 30mA Typ. (V) Max. (V) Vr @ Ir = 10uA Min. (V) DRx-MKS 1.8 2.2 2.5 12 Absolute Maximum Ratings DC forward current Maximum Value 50 Unit ma Peak pulse current; (tp 10µs, Duty cycle = 0.10) 100 ma Reverse voltage 12 V ESD threshold (HBM) 2 kv LED junction temperature 125 C Operating temperature -40 +115 C Storage temperature -40 +125 C Power dissipation (at room temperature) 140 mw Thermal resistance - Real Thermal Resistance Junction / ambient, R th JA real Junction / solder point, R th JS real - Electrical Thermal Resistance Junction / ambient, R th JA el Junction / solder point, R th JS el (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 360 150 250 110 K/W K/W K/W K/W 2
Wavelength Grouping at Tj=25 C Color Group Wavelength distribution (nm) Appx. 2.2 DRS; Super Red Full 627-639 DRY; Yellow Full W X Y 586-595 586-589 589-592 592-595 Luminous Intensity Group at Tj=25 C Brightness Group V1 V2 W1 W2 X1 X2 Luminous Intensity IV (mcd) 715.0... 900.0 900.0... 1125.0 1125.0... 1400.0 1400.0... 1800.0 1800.0... 2240.0 2240.0... 2850.0 Appx. 1.1 Vf Bining (Optional) Vf @ If = 30mA V1 Forward Voltage (V) 1.80... 1.95 Appx. 3.1 V2 1.95... 2.10 V3 2.10... 2.25 V4 2.25... 2.40 V5 2.40... 2.55 Please consult sales and marketing to incorporate special part number to incorporate Vf binning. 3
Allowable Forward Current I F ( ma ) Forward Current I F (ma) Forward Current I F (ma) Relative Luminous Intensity Vs Forward Current I V /I V (30mA) = f(i F ); T j = 25 C 2.0 50 Forward Current Vs Forward Voltage I F = f(v F ); T j = 25 C Relative Luminous Intensity I rel 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 F 45 40 35 30 25 20 15 10 5 0.0 0 5 10 15 20 25 30 35 40 45 50 Forward Current I F (ma) 0 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 Forward Voltage V F (V) Maximum Current Vs Temperature I F =f(t) Relative Spectral Emission I rel = f(λ); T j = 25 C; I F = 30mA 60 1.0 0.9 50 40 30 20 10 T A = Ambient Temperature T S = Solder Point Temperature T A T S Relative Luminous Intensity I rel 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 Yellow Super Red 0 0 10 20 30 40 50 60 70 80 90 100 110 120 Temperature T( C) 0.0 350 400 450 500 550 600 650 700 750 800 850 Wavelength λ (nm) 1000 Allowable Forward Current Vs Duty Ratio ( T j = 25 C; t p 10μs) 30 20 Radiation Pattern 10 0 1.0 40 0.8 100 50 60 0.6 0.4 10 0.1 1 10 100 Duty Ratio, % 70 80 90 0.2 0 4
Relative Wavelength λdom(nm) Relative Forward Voltage V F (V) Relative Forward Voltage Vs Junction Temperature V F = V F - V F (25 C) = f(t j ); I F =30mA 0.5 Relative Luminous Intensity Vs Junction Temperature I V /I V (25 C) = f(t j ); I F = 30mA 2.2 0.4 0.3 0.2 0.1 0.0-0.1-0.2-0.3-0.4 Relative Luminous Intensity I rel 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 Yellow Super Red -0.5-50 -30-10 10 30 50 70 90 110 130 150 Junction Temperature T j ( C) 0.0-50 -30-10 10 30 50 70 90 110 130 150 Junction Temperature T j ( C) Relative Wavelength Vs Junction Temperature λdom = λdom - λdom (25 C) = f(t j ); IF =30mA 14.0 12.0 10.0 8.0 6.0 Yellow 4.0 2.0 0.0 Super Red -2.0-4.0-6.0-8.0-50 -30-10 10 30 50 70 90 110 130 150 Junction Temperature T j ( C) 5
DomiLED Package Outlines Note : Primary thermal path is through Anode lead of LED package Note : Primary thermal path is through Cathode lead of LED package. Material Material Lead-frame Package Lead-frame Encapsulant Package Soldering Encapsulant Leads Soldering Leads Material Material Cu Alloy With Ag Plating High Temperature Cu Alloy With Resistant Au Plating Plastic, PPA High Temperature Silicone Resistant Resin Plastic, PPA Sn-Sn Epoxy Plating Au Plating 6
Opto Technologies Recommended Solder Pad 7
Opto Technologies Innovating Innovating Illumination Illumination Taping and orientation Taping and orientation Reels come in quantity of 2000 units. Reels come in quantity of 2000 units. Reel diameter is 180 mm. Reel diameter is 180 mm. InGaN Warm White: AlInGaP DDF-LJG : DRx-MKS 12 8 08/12/2016 V7.0
InGaN Warm AlInGaP White: : DRx-MKS DDF-LJG Packaging Specification 13 9 14/08/2017 08/12/2016 V2.0 V7.0
Packaging Specification Moisture sensitivity level Barcode label (L) Lot No : lotno (P) Part No : partno (C) Cust No : partno ML TEMP 2 260 C RoHS Compliant (Q) Quantity : quantity (G) Grouping : group (D) D/C : date code Made in Malaysia (S) S/N : serial no Moisture absorbent material + Moisture indicator Reel Label The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc DomiLED/Multi DomiLED 1 completed bag (2000pcs) Weight (gram) 0.034 190 240 ± 10 Cardboard Box For DomiLED Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Super Small 325 x 225 x 190 0.38 9 reels MAX Small 325 x 225 x 280 0.54 15 reels MAX Medium 570 x 440 x 230 1.46 60 reels MAX Large 570 x 440 x 460 1.92 120 reels MAX 10
Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 275 255-260 C 10-30s 250 225 217 C Ramp-up 3 C/sec max. Temperature ( C) 200 175 150 125 100 75 Preheat 60-180s 50 480s max 25 0 50 100 150 200 Time (sec) 60-150s Rampdown 6 C/sec max. 11
Appendix 1) Brightness: 1.1 Luminous intensity is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3). 1.2 Luminous flux is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3). 2) Color: 2.1 Chromaticity coordinate groups are measured with an internal reproducibility of ± 0.005 and an expanded uncertainty of ± 0.01 (accordingly to GUM with a coverage factor of k=3). 2.2 wavelength is measured with an internal reproducibility of ± 0.5nm and an expanded uncertainty of ± 1nm (accordingly to GUM with a coverage factor of k=3). 3) Voltage: 3.1 Forward Voltage, Vf is measured with an internal reproducibility of ± 0.05V and an expanded uncertainty of ± 0.1V (accordingly to GUM with a coverage factor of k=3). 12
Revision History Page - 3 Subjects Initial Release Update Wavelength Grouping for Super Red Date of Modification 31 Oct 2016 14 Aug 2017 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, does not assume any liability arising out of the application or use of any product described herein. reserves the right to make changes to any products in order to improve reliability, function or design. products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of. 13
About Us is a dynamic company that is amongst the world s leading automotive LED manufacturers. With an extensive industry experience and relentless pursuit of innovation, s state-of-art manufacturing and development capabilities have become a trusted and reliable brand across the globe. More information about, a ISO/TS 16949 and ISO 14001 certified company, can be found under http://www.dominant-semi.com. Please contact us for more information: Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: sales@dominant-semi.com