DEBURRING DESCALLING CLEANING FINISHING POLISHING DEGREASING www.valgroabrasives.com Valgro Engineers Private Limited Tele : +91 79 2297 203, 04, 05 Valgro House, Shailly Square, Fax : +91 79 2297 20 Virat Nagar Croass Road, NH. No. 8, valgro@valgroabrasives.com, abrasive@valgroabrasives.com Ahmedabad 382415, Gujarat, India www.brushingmachine.com www.valgroabrasives.com

Non woven pad & roll Valgro-Fynex hand pad and roll made with heavy duty nylon fiber with impregnation of industrial abrasives grain. They are used for manual cleaning and finishing application for any type of metal surface. Available with different type of grade for surface preparations work.

# 770 Extra duty pad : This is a pad designed for weld spatter cleaning and removal of heavy rust, discoloration spots and old paint. It does the work of steel wool, wire brushes and coated abrasive sheets, all put together. It can also be used for putty cutting prior to painting. # 7440 Heavy duty pad : 7440 is what you need when the industrial cleaning and finishing job calls for tough, long-lasting action. It does the work that other pads, steel wool and wire brushes, conventional # 772 Blending super fine pad : This is a pad designed expressly for blending and finishing of metal surfaces. It provides a cleaner and more attractive surface finish than steel wool, wire screens or coated abrasives for blending finishing of stainless steel, aluminum, cast iron, weld blending, oxide removal, paint removal, wood high-lighting, MG roll cleaning, scouring of reactor vessels and tanks, etc. # 4400 Cleansing pad : This pad is mainly used for light cleaning on final jobs, cleaning painted surfaces, glass vessels, ceramics and porcelain articles. # 7447 & # 1109 Gen. Engineering purpose : As the name suggests, this pad is designed to meet an almost unlimited number of industrial applications. It cleans and gives a better finish than steel wool. It is mainly used for cleaning of machinery, scouring of reactor vessels and tanks, cleaning of printed circuit boards/electrical contacts in motors/switch gears, oxide removal, finishing of wood, deburring of metal and ceramics, finishing of stainless steel and other alloys, finishing / polishing of die and surgical instruments, etc. # 7448 Ultra fine pad : A fast, easy and economical solution to light cleaning and finishing requirements. It lasts longer than steel wool and cleans better because it does not splinter. It is ideal for light cleaning / polishing oxides, cosmetic cleaning, light finishing of aluminum, wood defusing, small burr removal on aluminum, finishing of surgical instruments, etc.. Sanding Pad Size 150mm x 225mm (100 pads in a Box) Roll Size width 150mm x per Mtrs (Roll Length 100 Mtrs) Sanding Pad & Roll Products Ex Coarse Alo Medium Alo Medium ZM FINE Alo Very Fine Alo Super Fine Sic Ultra Fine SiC Nano Fine MOQ Sanding Pad Roll SP 770 RL 770 SP 7440 RL 7440 SS 7550 RL 7550 SP 7447 RL 7447 SP 1109 RL 1109 SP 7751 RL 7751 SP 7448 RL 7448 SP 4400 RL 4400 100 Pad 50 Mtrs Stock items. Manufactured items. Size in mm Other size and grits available on request.

Buff n blend discs Optimal Answers to Light Deburring & Finishing Challenges Gang discs 150 x 25 10 Coarse BF G0-0 Medium Alo BF G40-0 Medium Zm BF GZM-0 Fine BF G47-0 Heavy duty material 200 x 25 10 BF G0-08 BF G40-08 BF GZM-08 BF G47-08 Made with Heavy Duty "Valgro-Fynex" non woven material cut in to Disc can also be ganged-up on a shaft to form mops and brushes, The density of the ganged-up product can be varied to suit the user by either incorporation spaces or varying the number of actual discs. This makes the end product extremely versatile. Application : Polishing irregular surface of aluminium, brass and other non ferrous metal surface for antique and cosmetic finish. It is used for irregular shape like turning thread Deburring, precision gear teeth deburring, Slot finishing, Key way Deburring. Specifications: Two discs per set face the same direction for push and pull operation. Can be used for the same operation as the slotted discs. However, due to the multiple discs per set, these offer firmer, more aggressive discs. Effective on all steels, rubber, plastic and composites. Useful for irregular shapes like gear deburring, slot finishing, key way deburring, etc. Specific Applications : Light deburring with power tools Patterning steel fabrication, using air and electric tools Used for glazing cutlery, finishing, deburring and removing discoloration caused by heat treatment. Fitted to an orbital Stock items. Manufactured items. Size sander in mm to finish Other aluminum size bonnet and grits before available the final on coat request. of paint.

Unitized deburring wheel & mounted point Active Prevent of Undercutting & Gouging : "Valgro-Fynex" Unitized mop & Wheel are made from the high durability unitized material, It can shaped or profiled for the finishing and debarring of precision parts and are perfect for those difficult to reach areas. That will improve the quality of finishing on any Metal without smearing. Applications : Deburring and blending which requires high s Decorative finishing which requires low s Polishing which requires high speeds and low pressures Deburring: Aluminum die cast flashing Radius edges on precision machined parts Wire edges in surgical instrument Gears & aircraft wing spares Trailing and leading edges on turbine blades Breaking edges on aluminum extrusions Blending : Blending and refining surfaces of jet blade airfoils. Blending parting lines from casting parts / wrist watch cases Polishing welds on stainless steel jobs Removing minor pits, resins and adhesives over spray Removing punched hole burrs & coated abrasives scratches of 120 grit

DeBurring Mounted point Spindle Shape Medium Fine 25 x 38 B 52 11000 UB 2540M UB 2540F B 52 V 220 15 x 25 V 220 11000 UV 1525M UV 1525F 25 x 25 V 220 11000 UV 2525M UV 2525F 25 x 38 V 220 11000 UV 2540M UV 2540F Small Deburring Unitized wheels Prod. Des. Width. Rpm 50mm OD 75mm OD Medium 0mm 11000 UM500 UM750 12mm 11000 UM5012 UM7512 Coarse 0mm 11000 Uc500 Uc750 12mm 11000 UC5012 Uc7512 Stock items. Manufactured items. Size in mm Other size and grits available on request.

Wide face roller brush Perceptible Quality Enhancement in Cleaning / Finishing Operations Valgro-Fynex abrasive brush can be used in a varity of application to clean and finish HR - CR metal strip, sheet, and coil in pickling, de-greasing, de-scaling, rinsing and washing sections. Application : Remove debris and contamination from surface to create a clean surface, generate a consistent anchor pattern to improve the surface for better coating adhesion. provides a consistent satin scratch pattern and other cosmetic finishes. All these, in turn, increases productivity and reduces costs. Valgro-Fynex Brushes can allow you to use less chemical and heat with improve your surface cleanliness, saving pickling chemical cost up to 70% to 75%. l Worker safety improves and waste disposal is reduced. Brushes can be used in solution with a ph of 2-10 on cleaning line.

For metal strips, sheets, stainless steel coils coater & sheet metal components manufacturers Surfacing... Step by Step on Metal Strip 1 2 3 Blank & Coil Washing / Cleaning / Brushing Valgro-Fynex high quality brush effectively remove un-pickled patch, Depth oxide, Rust, Oil Patch and any type of residue from sheet and coil lines. After brushing the blank or Strip is flushed again with washing medium on both sides. To Help to remove most Historical Problems 1. Un-pickled Patch 2. Depth Oxide in Raw Material 3. Carbon Suit after Rolling 4. Oil Patch / Black Spots 5. Rusty Surface. Mill Mark/Pitch Mark 7. Scratch 8. Rolled in Scale Through our continues research and development efforts we are able to make Heavy-duty brushing machine. With the use of our brush & brushing machine, we have been able to remove / reduce the black carbon suits and Oil patch which is normally removed with the use of hazardous pickling process. Our Field trail has proved that saving on pickling chemical cost reduction to the tune of 70% to 75% can easily be obtained by reducing concentration of chemical. Advantages : * Increase surface value with Uniform cleaning Quality * Consistent scratch pattern for coating operation * Rust and Qxide free Surface * Remove un-pickled patch, oil patch and black spot * No dressing require throughout the brush life * Saving 70% to 75% on pickling chemical cost by reducing PH concentration Due to less chemical concentration environmental friendly work Perfectly fit at de-greasing, de-scalling & water rinsing cleaning station

Large Metal Finish Abrasives brush for Sheet metal & Stainless steel processing center Ultimate solution for deburring and Surfacing operation Deburring / Polishing Laser Cutting, Punching, Shear Cutting, Laser Oxide, Rust removal etc. Polishing / Finishing / Brushing Flat Sheet, Strips and coils, Brush Finish: MATT, SATIN finish achieved by Valgro Non-Woven abrasive brush Duplo Finish: Developed by Valgro Combi Kat brush with abrasive belt and Non-Woven material. N0. 4 Hairline Finish: Achieve by Valgro combi brush with 120, 150 grit abrasives grit. Valgro is the only company that manufactures abrasive brush and abrasive brushing machines, in order to provide complete solution to the client. With a high-tech manufacturing facility the company has consistently set standards in technology, innovation and product quality. They have continually set toughest of target and achieved high growth by keeping a tab on market and technological trends. Through continuous innovation and commitment to product quality the company is poised to acquire leadership position in the industry.

Finishing Flap brush & wheel It ensures a large variety of shadow-free uniform finishes, Valgro-Fynex Finishing Flap Brushes are made from Valgro heavy duty grade nonwoven material incorporate high strength nylon fiber blend with abrasive grain and resin. Compare to other nonwoven wheels 4 to 5 time long life. Working with high speed and pressure without smearing, cool and smooth running, They remove debits and contamination from surface to create a clean surface for coating operation. And Provides uniform pressure to the entire surface for wonderful finishing. Applications : polishing, blending, cleaning and brightening any metal surface for final operation. Suitable machine : Bench or pedestal grinders, polishing lathes, centre less grinders, flexible shaft grinders, and portable tools.

Metal Finish Flap Brush Coarse Medium Fine Super Fine Ultra Fine Accessory 150 x 25 50.8 F0012 F40012 F47012 F51012 F48012 AF50 150 x 50 50.8 F0022 F40022 F47022 F51022 F48022 AF50 200 x 25 7.2 F00813 F400813 F470813 F510813 F480813 AF75 200 x 50 7.2 F00823 F400823 F470823 F510823 F480823 AF75 250 x 50 125 F01025 F401025 F471025 F511025 F481025 AF125 300 x 50 2500 F01227 F401227 F471227 F511227 F481227 AF 350 x 50 0 F01427 F401427 F471427 F511427 F481427 AF Stainless steel finishing brush Coarse Medium Fine Super Fine Accessory 100 x 100 19 P044 P4044 P4744 P5144 ACF19 115 x 100 19 P054 P4054 P4754 P5154 ACF19 150 x 75 50.8 P03 P403 P473 P513 ACF50 Circular Nonwoven flap discs 100 1 Coarse Medium Fine NFD 04 NFD 504 NFD474 115 22 NFD 05 NFD 505 NFD 475 22 NFD 07 NFD 507 NFD 477 spindle mounted finishing flap brush Spindle Coarse Medium Fine Super Fine Ultra Fine 50 x 25 500 NM05025 Nm405025 NM475025 NM515025 NM485025 50 x 50 500 NM05050 NM405050 NM475050 NM515050 NM485050 75 x 12 NM07512 NM407512 NM477512 NM517512 NM487512 75 x 25 NM07525 NM407525 NM477525 NM517525 NM487525 75 x 50 NM07550 NM407550 NM477550 NM517550 NM487550 100 x 50 NM00050 NM00050 NM470050 NM400050 NM480050 Stock items. Manufactured items. Size in mm Other size and grits available on request.

Kombi flap brush High rate of cut, Provide Uniform Hairline Finish "Valgro-Fynex" Kombi Flap wheels are manufactured from closely packed strips of Valgro heavy duty material with the addition of a coated abrasive strip between each layer. The Valgro materials between the layers of coated abrasive provide a resilient backing that eliminates the layover effect encountered with conventional abrasives flap wheel. The Valgro-Fynex metal surface combination system is the most versatile method for all applications where a linear scratch pattern required with reduces finishing cost. Whether you work in stainless steel, steel, aluminum, brass, copper or other alloys. Suitable Machine : electric hand tool as well as small bench grinder Automatic & Semi Automatic machinery such as pedestal grinders, polishing lathes, centre less grinders, drill motor, shaft grinders, Coil cleaning machines, Rotary machines, Straight line machines & Robotic equipment. Specific application: Removing paint and conditioning metal surface. Weld removal and blending-in Removing heavy dirt and oxide before welding and painting on pipes and tubing Light sanding of wood before lacquer. grains finishing stainless steel sheets after conventional coated abrasives. Hairline finish on large surface

Standard production Coarse Medium Fine Accessory 150 x 25 50.8 KCR012 KSM012 KVF012 AF50 150 x 50 50.8 KCR022 KSM022 KVF022 AF50 200 x 25 7.2 KCR0813 KSM0813 KVF0813 AF75 200 x 50 7.2 KCR0823 KSM0823 KVF0823 AF75 250 x 50 125 KCR1025 KSM1025 KVF1025 AF125 300 x 50 2500 KCR1227 KSM1227 KVF1227 AF 350 x 50 0 KCR1427 KSM1227 KVF1227 Af Two abrasive leaves Coarse Medium Accessory 150 x 25 50.8 KCR2L012 KSM2L012 AF50 150 x 50 50.8 KCR2L0 22 KSM2L022 AF50 200 x 25 7.2 KCR2L0813 KSM2L0813 AF75 200 x 50 7.2 KCR2L0823 KSM2L0823 AF75 250 x 50 125 KCR2L1025 KSM2L1025 AF125 300 x 50 2500 KCR2L1227 KSM2L1227 AF 350 x 50 0 KCR2L1427 KSM2L1227 Af Three abrasive leaves Coarse Medium Accessory 150 x 25 50.8 KCR3L012 KSM3L012 AF50 150 x 50 50.8 KCR3L022 KSM3L022 AF50 200 x 25 7.2 KCR3L0813 KSM3L0813 AF75 200 x 50 7.2 KCR3L0823 KSM3L0823 AF75 250 x 50 125 KCR3L1025 KSM3L1025 AF125 300 x 50 2500 KCR3L1227 KSM3L1227 AF 350 x 50 0 KCR3L1427 KSM3L1227 Af Stock items. Manufactured items. Size in mm Other size and grits available on request.

kombi paper wheels for wood market Coarse120 Medium 150 Fine 220 Accessory 150 x 25 50.8 KPC012 KPM012 KPF012 AF 50 150 x 50 50.8 KPC022 KPM022 KPF022 AF 50 200 x 25 7.2 KPC0813 KPM0813 KPF0813 AF 75 200 x 50 7.2 KPC0823 KPM0823 KPF0823 AF 75 250 x 50 125 KPC1025 KPM1025 KPF1025 AF 125 300 x 50 2500 KPC1227 KPM1227 KPF1227 AF Hairline metal finish brush for stainless steel 100 x 100 19 Coarse Medium Fine KCR44 KSM44 KVF44 Accessory AF 19 115 x 100 19 KCR54 KSM54 KVF54 AF 19 150 x 75 50.8 KCR3 KSM3 KVF3 AF 50 Circular Kombi flap discs Coarse Medium Fine 100 1 KFD 04 KFD 804 KFD 474 115 22 KFD 05 KFD805 KFD 475 spindle mounted kombi flap brush Spindle Coarse Fine 50 x 25 500 KC 05025 KV 05025 50 x 50 500 KC 05050 KV 05050 75 x12 KC 07512 KV 07512 75 x 25 KC 07525 KV 07525 75 x 50 KC 07550 KV 07550 100 x 50 KC 10050 KV 10050 Stock items. Manufactured items. Size in mm Other size and grits available on request.

VXL deburring and finishing wheels An excellent starting point for New Generation deburring requirements Made with Valgro-Fynex heavy duty impregnated nylon fiber abrasives material wind on a resin core and bonding with together with high compress technology. Specially designed for medium to heavy deburring, High finishing and polishing effect on solid metal surface. We have three qualities of convolute wheels, Cut N Polish, Medium, Fine grade A Deburring Wheel that Cuts a Whole Lot Faster! A Wheel That Runs Much Cooler!! Tour Wheels That Run at Top Speed!!!

Cut N polish wheels: Light cutting as well as finishing of machining line, this will specialty designed for micro stock removal, two to three micron stock removal capacity. Suitable for rough grind line finishing, coated abrasives scratch blending, surgical and orthopedic implants wire cut parts finishing etc. 8A medium deburring wheels: This is suitable for all general purpose application, It is best against 3M 8AMED. Wheels more cutting action and faster finishing rate. ZM Blue polish wheels: When customer require high finish in final finishing operation. Tthis is most suitable before plating or coating Fine Polish Wheels: Suitable for final polishing after plating, or buffing operation, increase surface value. With SSF operation operator achieve Ra finish up to 0.02. Suitable Machine : Off hand application, Bench area operation, Tool post on length, Polishing machine, Grinding machine and other robotic equipments Deburring wheels C N P 8A Med Fine Blue Zm 150 x 12 25.4 000 CNP 001 VXL8A 001 VXL9S 001 ZM 001 150 x 25 25.4 000 CNP 011 VXL8A 011 VXL9S 011 ZM 011 150 x 50 25.4 000 CNP021 VXL8A 021 VXL9S 021 ZM 021 200 x 12 7.2 4500 CNP 0803 VXL8A 0803 VXL9S 0803 ZM 0803 200 x 25 7.2 4500 CNP 0813 VXL8A 0813 VXL9S 0813 ZM 0813 200 x 50 7.2 CNP 0823 VXL8A 0823 VXL9S 0823 ZM 0823 300 x 25 125 CNP 1215 VXL8A 1215 VXL9S 1215 ZM 1215 300 x 50 125 CNP 1225 VXL8A 1225 VXL9S 1225 ZM 1225 350 x 50 0 VXLCP 1427 VXL8A 1427 VXL9S 1427 ZM 1427 400 x 50 0 VXLCP 127 VXL8A 127 VXL9S 127 ZM 127 Stock items. Manufactured items. Size in mm Other size and grits available on request.

Deburring, Scrubbing Deoxidising PCB Brush perceptible quality enhancement in cleaning & deburring Consistent Quality in Cleaning : Consists of "Valgro-Fynex" Material compressed on to a core for use on printed circuit cleaning and scrubbing machine and are ideals for all cleaning operations. The PCB used in the electronics industries are getting smaller and lighter with demand for higher performance, greater reliability, higher density, finer patterns and multi-layer constructions have changed the methods and material used to make PCB. It demands proper surface conditioning for every step of the manufacturing process.

Deburring Flap brush (Impregnated) Valgro-Fynex Deburring Impregnated flap brushes ideally suitable for high speed drilled holes precise Deburring, to avoid subsequent errors, or missing connection. Due to high density Flap construction valgro Deburring brush offer longer life and higher performance. Part No. Size OD x Width x ID Grit PCB47524D 125mm x 10mm x 50.8mm FINE PCB47518D 125mm x 450mm x 50.8mm FINE PCB472D 152mm x 40mm x 7.2mm FINE Scrubbing / cleaning / deoxidising brushes (Impregnated) Cleaning and deoxidizing with Valgro Valgro Impregnated flap brushes have an established design. Due to stiffness construction increases the abrasiveness without making any major changes to the surface roughness. Prior to solder mask it is most appropriate for cleaning / deoxidizing of the printed circuit boards. Part No. Size OD x Width x ID Grit PCB51524D PCB51518D PCB512D 125mm x 10mm x 50.8mm 125mm x 450mm x 50.8mm 152mm x 40mm x 7.2mm SFN SFN SFN Scrubbing brush prior to nickel / gold plating (Non Impregnation) Prior to nickel / gold plating and after tin/lead solder, the surface must be free of oxidisation, in this application Valgro-Fynex non-impregnated brush is most demanding by industries. Valgro-Fynex finishing brushes increase the copper surface without the damaging of the Printed Circuit Boards. Part No. Size OD x Width x ID Grit PCB51524P 125mm x 10mm x 50.8mm SFN PCB51518P 125mm x 450mm x 50.8mm SFN PCB512P 152mm x 40mm x 7.2mm SFN Abrasives bristle brushed (Nilox) Nilox abrasives bristle brushes made with 100% DuPont Tynex abrasives nylon, 12 Filaments, are absolutely ideal for single and double sided PCBs producer for consumer electronics market only. It is not advisable for multilayer or very fine circuit's production. Part No. NLX32024 NLX32018 Size OD x Width x ID 125mm x 10mm x 50.8mm 125mm x 450mm x 50.8mm Grit 320 320 NLX50024 125mm x 10mm x 50.8mm 500 NLX50018 125mm x 450mm x 50.8mm 500 Reconditioning Pressplate brush The objective press plate reconditioning is to remove resin remains which are attached to the surface after pressing the laminate respectively the multilayer on the pressplate. In the course of this process it is important that the original surface roughness of the pressplate remains unchanged in long term testing with up to 1000 passes, the constant brushing quality has been proven by Valgro: reconditioning pressplate brush available with 320, 400 and 00 grit, selection of the brush depending upon base metal surface. Shear Edge Deburring kombi brush Valgro-Fynex Kombi brushes are ideal for removing burr from shear PCBs edges, designed for electric hand tools as well as small bench grinder. The valgro high strength non-woven material between the layers of Cut-ite coated abrasive provide resilient backing that eliminates the layover effect encountered with conventional process. Special size available up on request

Strip-cut" coating removal discs Ideal for aggressive cleaning and scrapping Strip-cut is made from nylon fibers impregnated with coarse carbide grains and reinforced with epoxy coating. This combination produce an abrasive web material that is sharp, non-loading and flexible, making an ideal abrasive for effective surface cleaning. Due to a unique open web design, Strip-cut removes only the top "skin" layer of the workpiece without grinding or cutting of base metal surface. This web construction also allows for cooler grinding, preventing burn marks on surface area. Usage of this versatile abrasive wheel is common in marine dockyards, Maintenance in plant, car repair workshops, metal fabrication and stainless steel factories. Its applications are mainly for surface conditioning, blending, weld splatter cleaning, removal of rust, scales, dirt gasket & paint stripping. Angle Discs: Suitable Machines Power & pneumatic angle grinders. Plain Discs: Suitable Machines Portable power/pneumatic tools with collets fixing, drill straight shaft grinders.

Major User Industries Coil Coaters Automotive Components Makers Appliance Manufacturers Ship Builders Power Plants Pressure Vessels Manufacturers Maintenance Specialists Stainless Steel Fabricators Aluminium Fabricators Building Hardware Fabricators Bride Beam makers Utilities Providers Wire Drawers Manufacturers Tube / Pipe Manufacturers Pipe Fitters Injection Moulders Pre Fabricated Concrete Manufacturers Angle discs Stock ID 115 x 13 22 8300 SCAD 3327 x 13 22 5400 SCAD 3328 Plain discs Stock ID 50 x 13 12 SCPD 3330 150 x 13 12 SCPD 3332 Spindle mounted wheels Stock ID 50 x 13 000 SCM 5012 50 x 25 000 SCM 5025 Stock items. Manufactured items. Size in mm Other size and grits available on request.

Coated abrasives products World Class Finesse in Surface Finish Long Life : Provides continuous grinding by permitting easy automation. No Burning : Air cooling effect prevents burning and thermal deformation. No Loading : Freshing effect produces a new grinding surface continuously and prevents loading. Uniform Scratch Pattern : Provides uniform surface roughness, from beginning to end. Good Shaping Ability : Provides effective grinding of curved or irregular surfaces. High Flexibility : Due to flexible geometry, gouging does not occur, in spite of accidental high pressure metal.

"Cut-ite" Flap wheel is flexible and quickly adapts itself to the shape of the work. Thus, the work is affected only by the edge of the flap. Hence, the keen cutting edge and shape is retained during the life cycle. Coated abrasives flap wheels Grit 0 Grit 80 Grit 120 Grit 150 Grit Grit 220 Grit 320 Grit 400 Grit 00 150 x 25 31.75 CF 0001 CF 08001 CF 12001 CF 15001 CF 01 CF 22001 CF 1 CF 40001 CF 0001 150 x 50 31.75 CF 0002 CF 08002 CF 12002 CF 15002 CF 02 CF 22002 CF 2 CF 40002 CF 0002 200 x 25 100 CF 00081 CF 080081 CF 120081 CF 150081 CF 081 CF 220081 CF 81 CF 400081 CF 00081 200 x 50 100 CF 00082 CF 080082 CF 120082 CF 150082 CF 082 CF 220082 CF 82 CF 400082 CF 00082 350 x 50 CF 00142 CF 080142 CF 120142 CF 150142 CF 142 CF 220142 CF 320142 CF 400142 CF 00142 Spindle mounted flap / mops wheels Shaft Grit 0 Grit 80 Grit 120 Grit 150 Grit 150 Grit 220 Grit 320 25 x 25 CM 011 CM 8011 CM 12011 CM 15011 CM 11 CM 22011 CM 32011 50 x 25 CM 021 CM 8021 CM 12021 CM 15021 CM 21 CM 22021 CM 32021 50 x 50 CM 022 CM 8022 CM 12022 CM 15022 CM 22 CM 22022 CM 32022 80 x 25 CM 031 CM 8031 CM 12031 CM 15031 CM 31 CM 22031 CM 32031 80 x 50 CM 032 CM 8032 CM 12032 CM 15032 CM 32 CM 22032 CM 32032 Radial flap discs Grit 3 0 80 120 Size/MOQ 50 50 50 50 100 x 1 FD4-3Z FD4-0Z FD4-80Z FD4-120Z 115 x 22 FD5-3Z FD5-0Z FD5-80Z FD5-120Z x 22 FD7-3Z FD7-0Z FD7-80Z FD7-120Z Convex Construction for Greatest Stock Removal: Flap Disc is suitable for both Pneumatic and electric tools; it provides durability twenty times as greater than fiber disc. The product is less burning problem, prevents thermal or heat deformation and provides continuous grinding. Applications: Rapid, aggressive stock removal on a variety of welds, castings and other metal fabrication applications High stock removal on metal cabinets, corners and flats Removal of cutting torch slag from steel plates.

Circular flap Discs 3 0 80 120 100 1 CFD34 CFD04 CFD804 CFD1204 115 22 CFD35 CFD05 CFD805 CFD1205 22 1200 CFD37 CFD07 CFD807 CFD1207 Valgro Fynex Still Jog sleeves are constructed of sharp, even-bonded mineral, coated on a strong drill cloth backing and spirally wound over a cloth inner liner. This forms an abrasives-surfaced cylinder that can rotate smoothly in either direction. This easy-to-use product provides a fast, continuous cut and high performance across a long life, enabling lower costs per work piece. Applications : Finishing curved or contoured areas and other hard-to-reach areas. Removing parting lines, imperfections and burrs on any surface. Steel-jog sleeves 10 x 25 11000 Grit 3 SL 3101 Grit 0 SL 0101 Grit 80 SL 80101 Grit 120 SL 120101 Grit 150 Grit 220 SL 150101 SL 220101 Rubber Mandrill AC 1025 15 x 25 11000 SL 3151 SL 0151 SL 80151 SL 120151 SL 150151 SL 220151 AC 1525 25 x 25 8000 SL 3251 SL 0251 SL 80251 SL 120251 SL 150251 SL 220251 AC 2525 50 x 25 8000 SL 3501 SL 0501 SL 80501 SL 120501 SL 150501 SL 220501 AC 5025 75 x 25 8000 SL 3752 SL 0752 SL 80752 SL 120752 SL 150752 SL 220752 AC 7525 Accessories-Still Jog Sleeves Valgro Rubber-slotted Expander Wheels Available in a wide variety of sizes for use with Still Jog Sleeves and Belts. While the tool is running, centrifugal force holds the "Still Jog" on expander wheels. Stock items. Manufactured items. Size in mm Other size and grits available on request.

Nilox abrasives wire brush Nilox abrasive filament brush made with 100% dupont nylon 12 grade and mixture of abrasive grit. The abrasive grit is uniformly dispersed throughout the resulting filaments during extrusion process. Nilox brushes are safe, non reactive and offer an excellent alternative to traditional steel filament brushes. Good stiffness, wet or dry, lower moisture absorption, great bend recovery, batter chemical resistance and longer brush life is other benefits. Wide Face Cylinder Roller Brushes Nilox wide roller abrasives filament brush are widely used in steel plant for de-scaling, de-greasing and cleaning and graining operation for batter coating adhesion. Nilox filament bristle having 90% bend recovery with chemicals resistant power it can be used mild alkaline solution, Circular Wire Brushes Nilox circular abrasives wire brushes: mainly used for cleaning, deburring for uneven component like, gears, chain sprocket, crank shaft, cam shaft, Engine block, Aluminum heat shrink, Aluminum engine cylinder, extrusion cut off burre, etc. Available size from 4" - 14" outer s width as per customer specification. Suitable Machine : pedestal grinders, bench area operation. Any robotic machine. Vertical machine center. Please consult the abrasive filament chart for other grits and abrasive types Nilox Spindle Mounted Brush Nilox Spindle mounted filament abrasives wire brush are normally used for internal diameters cleaning and deburring like piston ring edge deburring, tube deburring Abrasive nylon mandrel mounted brushes are safe, non-reactive and offer an excellent alternative to traditional steel filament brushes. The brushes have an integral mm shank which makes them ideal for use in automated and CNC equipment. Please consult the abrasive filament chart for other grits and abrasive types.

Nilox abrasives bristle products VMC / HMC Discs brush Solve many deburring, edge radioing, grinding and finishing problems. Their compliancy and filament nature accommodate part contours, prevent damage to value-added components, and make them ideal for robotic, semi and fully automated workstations. VMC / HMC discs brush x width 1/min Grit 4 Grit 80 Grit 120 Grit 320 50 1400 VMC42 VMC802 VMC122 VMC322 100 12 1400 VMC44 VMC804 VMC124 VMC324 125 12 1400 VMC45 VMC805 VMC125 VMC325 19 900 VMC47 VMC807 VMC127 VMC327 End Brush Deburring and Finishing Inner Dia. Or recesses of machine parts. Spot-facing drilled holes to remove burrs and edges, suitable for low speed CNC machining centers and portable tools. Tube And Interior Cleaning Brush Inner Dia. Cleaning brush: Inner dia. / tube cleaning brushes are designed for use on portable tools and drill MACHINE. They provide hard-working brush action for fast, thorough cleaning, DEBURRING and finishing in such hard-to-reach places as small diameter holes, deburring recesses, internally threaded surfaces, and many otherwise inaccessible areas. Fill materials include steel, stainless steel, brass, nylon abrasive filament and nylon. The particular purposes of tube cleaning brushes are to de-rust, clean and de-scale the insides of tubes. They are used for manual processing and in flexible shafts and static machines.