ROLATM SECURITY PRODUCTS CATALOGUE FROM BRAMAH ENGLISH LOCK MANUFACTURERS SINCE 4
ROLA SECURITY PRODUCTS FROM BRAMAH and es - Satin Chrome, CP - Chrome, B - Brass, - hite and BL - Black code Page code Page R/0, B or CP ooden sash window mm stop, in pack R/0, B or CP ooden sash window mm stop, supplied loose R/0, B or CP ooden sash window mm stop + Extra Insert, set in pack R/04, B or CP ooden sash window mm stop, in pack R/0, B or CP ooden sash window mm stop, supplied loose R/0 or B, 4 Retractable wooden sash window 4mm stop, in pack R/0 or B ooden sash window mm stop, supplied loose R/0 or B ooden sash window mm stop, in pack R/0, B or CP Sash stop plate mm x mm, supplied loose R/, B or CP ooden sash window mm stop + Extra Insert + Plate, set in pack R/, B or CP ooden sash window mm stop + Extra Insert + Plate, set in pack R/, B or CP ooden sash window mm stop, No Insert, supplied loose R/, B or CP ooden sash window mm stop, No Insert, supplied loose R/4 ooden sash window mm Insert only, supplied loose R/ B ooden sash window 4mm stop for operation by Chubb, Banham, Safer Homes or Barrs Keys, supplied loose R/ (R/0in volume), B or CP ooden sash window mm stop, in pack, 0 pairs R/ (R/04 in volume), B or CP ooden sash window mm stop, in pack, 0 pairs R/ (R4/04 in volume), B or CP Threaded insert, mm, for wood, M, in pack, 0 packs R/ (R/0 in volume) or B Retractable wooden sash window 4mm stop, in pack, 0 packs R/0, or B 4 ooden casement window lock, in pack R/0 or B Metal window lock, mm locking screw, in pack R/0 or B Metal window lock, mm locking screw, in pack R/0, Metal casement window lock + mm packer, set in pack R/04, Metal fanlight window lock + mm packer, set in pack R/0, Metal casement window, mm packer, in pack R/0, Metal fanlight window, mm packer, in pack R/0, Metal casement window locks & mm packers, packed as components R/0, Metal fanlight window locks & mm packers, packed as components R/0 or B Metal window lock, mm locking screw, supplied loose R/ (R/0 in volume), Metal casement window lock + mm packer, set in 0 packs R/ (R/04 in volume), Metal fanlight window lock + mm packer, set in 0 packs R4/0, B or CP Threads, mm body, mm screw, M, in pack R4/0, B or CP Threads, mm body, 40mm screw, M, in pack R4/0, B or CP Threads, mm body, 0mm screw, M, in pack R4/04 Fastener, mm, for wood, M, in pack R4/0 Fastener block, for wood or metal, M, in pack R4/0 UPVC Fastener for sheet, UPVC or aluminium, M, in pack R4/0 Threaded fastener with shoulder, mm, for wood, M, in pack R4/0 Threaded fastener, for sheet, UPVC or aluminium, M, in pack R4/0, B or CP Threads, mm body, mm screw, M, sold loose R4/ Threaded fastener with shoulder, mm, for wood, M, in pack R/0, B colour or Renown 0 locking bolt, flush end, mm throw, in pack R/0, B colour or Renown locking bolt, ball end, mm throw, in pack R/0, B colour or 'A' type staple for renown locking bolt, in pack R/04, B colour or 'H' type staple for renown locking bolt, in pack R/0, B colour or Renown 00 locking bolt, ball end, mm throw, in pack R/0, B colour or Renown 0 locking bolt, ball end, mm throw, in pack R/0, B colour or 'L' type staple for renown locking bolt, small, in pack R/0, B colour or Renown mm thick packing piece for use under bolt, in pack R/0, B colour or Renown 0 locking bolt, ball end, mm throw, in pack R/, B colour or Renown mm thick packing piece for Crittall frames, in pack R/, B colour or 'L' type staple for renown locking bolt, large, in pack R/0 Rola keys, standard, 0mm shank, in pack R/0 Rola keys, standard, 0mm shank, supplied loose R/0 Rola keys, short, mm shank, in pack R/04 Rola keys, long, mm shank, in pack R/0 Rola keys, short, mm shank, supplied loose R/0 Rola keys, long, mm shank, supplied loose R/0 (R/0 in volume) Rola keys, standard, 0mm shank, in pack, 00 packs R/0, B or Hinge bolt, in pack R/0 (R/0 in volume) Hinge bolt, in pack, 00 packs R/0 BL 'T' Handle allen keys for ood Fasteners R4/04 R/0 BL 'T' Handle allen keys for ood Fasteners R4/0
ROLA OODEN SASH INDO STOPS Rola sash stops are designed to stop sash windows opening past each other whilst allowing ventilation. The heads revolve, but they are removable with a key. R/0 R/0 R/0 This provides security against illegal entry and prevents small children climbing or falling out. A Rola S comes in three sizes: The mm combats those sash windows with large gaps between them as well as those with tapered bottom halves. s R/0, R/0 R/0, R/, R/ and R/ are not illustrated R/0 R/04 The mm for standard wooden windows. The mm which fastens into a smaller threaded insert and is therefore suitable for double glazed wooden sash windows and those finer frames. A separate rectangular Stop Plate is available to protect the internal window frame. Additional threaded inserts are available to allow two positions for each stop. R/0 Ventilation Provision approximately 0mm R/0 to R/0 External indow Frame R/0& R/0 Internal indow Frame 4 Keyhole Rola S products are installed by drilling a hole to the correct diameter and depth and screwing the threaded insert in position with an Allen key. All products in the Rola range are operated by the uniquely designed Rola Key. codes relate to each product and also to how they are supplied; packed singly, packed in multiples or loose. See list of options. here Rola s are packed, this includes a display header card and if applicable, fixing instructions. Not shown in the product codes but listed in the index are R/ (R/0 in volume of 0 pairs). R/ (R/04 in volume of 0 pairs). R/ (R4/04 in volume of 0 packs of ). R/ (R/0 in volume of 0 packs, see page 4).. R/0 Rola S - Body and Threaded insert, B or CP (mm Body, mm Screw, M Thread) R/0 Rola S - Body and Threaded insert, B or CP Loose (mm Body, mm Screw, M Thread) R/0 Rola S - Body and Threaded inserts, B or CP (mm Body, mm Screw, M Thread) R/04 Rola S - Body and Threaded insert, B or CP (mm Body, mm Screw, M Thread) R/0 Rola S - Body and Threaded insert, B or CP Loose (mm Body, mm Screw, M Thread) R/0 Rola S - Body and Threaded insert or B Loose (mm Body, mm Screw, M Thread) R/0 Rola S - Body and Threaded insert or B (mm Body, mm Screw, M Thread) R/0 Rola S - Sash Stop Plate mm x mm, B or CP Loose R/ Rola S - Body, Threaded inserts and R/0, B or CP (mm Body, mm Screw, M Thread) R/ Rola S - Body, Threaded inserts and R/0, B or CP (mm Body, mm Screw, M Thread) R/ Rola S - Body, NO Threaded insert, B or CP Loose (mm Body, mm Screw, M Thread) R/ Rola S - Body, NO Threaded insert, B or CP Loose (mm Body, mm Screw, M Thread) R/4 ONLY Threaded inserts Loose (M Thread) R/ Rola S - Body and Threaded insert, B or CP Loose (4mm Body, mm Screw, M Thread) For Chubb, Banham, Safer Homes & Barrs Keys
4 ROLA RETRACTABLE STOP FOR OODEN SASH INDOS The Rola S is designed to stop windows opening past each other, whilst allowing ventilation. The head revolves but retracts into the window frame with a key. R/0 R/0 The Rola S projects 4 mm and is supplied with its own Stop Plate and fixing screws. Rola S products require only the correct size hole, they are then secured with the screws supplied. R/0 4 All products in the Rola range are operated by the uniquely designed Rola Key. 40 ROLA x ROLA R/0 Rola S - Body, Stop Plate and Screws or B, (Projection 4mm, Body Length mm) ROLA OODEN CASEMENT LOCK The Rola casement window lock is designed for wooden, side hinged or vertical and horizontal centre pivot windows. For those windows with tapered edges, substantial play is built into the lock. A hole to the correct diameter and depth is drilled in the window frame and the threaded insert screwed in position with an Allen key. Using this as a guide, the body of the lock is secured to the fixed wooden frame with the non-return posi-drive screws supplied. R/0 R/0 R/0 Fixed ooden Frame R/0 Rola C - Body, Threaded insert and Screws or B, (Projection mm, Body Length mm)
ROLA METAL INDO LOCK R/0 R/0 metal window locks are Rola designed to screw together a Crittall window and frame. The heads revolve. are available with a mm They or mm screw, M thread. hole is required in Atheclearance fixed frame and a mm R/0 tapped hole in the window. M Tapped hole Clearance hole R/0 R/0 Rola M - Body (mm Body, mm Screw, M Thread) or B R/0 Rola M - Body (mm Body, mm Screw, M Thread) or B R/0 Rola M - Body (mm Body, mm Screw, M Thread) or B Loose 4 ROLA METAL CASEMENT INDO LOCK R/0 R/0 Rola casement window The lock is designed for metal, side 4 hinged windows with handle rotating on a fixed frame. frame and the body of the lock held in position by the two self tapping screws supplied. 0. holes to the correct Two diameter are drilled in the ROLA A mm * thick packing piece is supplied as standard, mm packing pieces are available, R/0, but not supplied. * products in the Rola range are Alloperated by the uniquely designed R/0 Rola Key. R/0 Rola CM - Body, Packing and Self Tapping Screws (Projection 4mm, Body Length 0.mm) R/0 Rola CM - mm Packing Piece R/0 Rola CM - Body, Packing and Self Tapping Screws (Projection 4mm, Body Length 0.mm) separate components R/ (R/0 in volume) Rola CM - Body, Spacer and Self Tapping Screws (Projection 4mm, Body Length 0.mm) x0 packs
ROLA RENON LOCKING BOLTS ROLA RENON STAPLES Renown locking bolts are Rola used to secure wooden and metal French doors, hinged back doors and back gates. R/0 are also used as They temporary locks, on doors previously attacked, whilst a new door is being prepared. R/0 R/0 Rola Renown bolts are Most supplied with a knob end to R/04 R/0 allow a simple push and pull action especially necessary for users with impaired dexterity, and because the bolts do not lock automatically, they are more suited for the disabled. Renown bolts come in four Rola sizes: s R/0, R/ and R/ are not illustrated Rola Renown products are All supplied with their own fixings. R/0 locked onto a metal frame without a staple products in the Rola range All are operated by the uniquely 4. 4.Ø. r 0 0 R/0 Rola Renown Locking Bolt with flush end For wood and metal* - mm throw R/0 Rola Renown Locking Bolt with Ball end For wood and metal* - mm throw R/0 Rola Renown 00 Locking Bolt with Ball end For wood and metal* - mm throw. R/0 Rola Renown 0 Locking Bolt with Ball end For wood and metal* - mm throw. R/0 Rola Renown 0 Locking Bolt For wood and metal* - mm throw. R/0 Rola Renown mm thick Packing Piece For use under Rola Renown Locking Bolts R/ Rola Renown mm thick Packing Piece To locally increase Crittall frame thickness designed Rola Key. *In most cases when fixing a Rola Renown Locking Bolt to metal a staple will not be required - see illustration 4.Ø...Ø R/ R/0 Design H is for outwardly opening doors such as French doors. 4.Ø 4.. r 4.Ø 4.. r.ø.ø 4. Design L is for use as an alternative when frame construction does not allow design A or H top be used. Hole centres approximately 4.mm and mm from the base of the L..Ø 4 Design A is for inwardly opening doors such as back gates, front doors and as a temporary lock after normal locks fail. 0 The mm for Crittall frames. must be used to maintain maximum security. 0 pieces are available Packing mm thick to pack under bolts. the the bolt is secured hen into a wooden frame a staple R/04 0..Ø 0mm. The standard Rola Renown comes in two body shapes the knob end and a streamlined version, both have a mm throw. mounted onto the door. If necessary use the correct packing pieces. Rola Renown staples are used to secure or provide bolt holes in wooden frames. Renown bolts come in four Rola sizes and three designs, A,H and L: 0mm. The 0 model has the added advantage of a longer mm throw. Renown locking bolts are Rola simple to fit being surface R/0 R/0+R/04 R/0 and R/0 4. R/0 0mm. The Rola Renown 0 has a mm throw. It is useful where extra length is required or as a bottom bolt for those confined to wheelchairs. R/0.. 00mm. The Rola Renown 00 has a mm throw and is suitable for the top bolt on tall doors or operation by users confined to wheelchairs. R/0 0 0 R/0+R/0 possible Rola Renown here staples should be recessed into the wooden frame for maximum strength. codes relate to each product and also to how they are supplied; packed singly, packed in multiples or loose. See list of options. here Rola s are packed, this includes a display header card and if applicable, fixing instructions. R/0 'A' type Staple for Rola Renown Locking Bolts R/04 'H' type Staple for Rola Renown Locking Bolts R/0 'L' type Staple for Rola Renown Locking Bolts mm from base of fixing plate to hole centre R/ 'L' type Staple for Rola Renown Locking Bolts mm from base of fixing plate to hole centre
ROLA METAL FANLIGHT INDO LOCK R/04 Rola fanlight window lock is The designed for metal, top hinged windows with stay arms. holes to the correct Two diameter are drilled in the stay R/04 0 R/04 arm and the lock held in position by the top hat nuts and screws supplied. * A mm * packing piece is supplied as standard, mm packing pieces are available, R/0, but not supplied. 44 0 codes relate to each product and also to how they are supplied; packed singly, packed in multiples or loose. See list of options. here Rola s are packed, this includes a display header card and if applicable, fixing instructions. ROLA R/04 Rola FM - Body, Top Hat Nuts and Screws (Projection 0mm, Body Length 44mm) R/0 Rola FM - mm Packing Piece R/0 Rola FM - Body, Top Hat Nuts and Screws (Projection 0mm, Body Length 44mm) separate components R/ (R/04 in volume) Rola FM - Body, Top Hat Nuts and Screws (Projection 0mm, Body Length 44mm) x 0 packs ROLA MULTI PURPOSE LOCKS - THREADS R4/0 R4/0 Multi-Purpose are a variety Rola of ten components, threads and fasteners that can be combined to be used in problem situations, for example, Stay Locks, Single and Double Sliding Patio Doors, Removable Grille and Access Panel Locks. Shown here are the four lengths of threads,,, 40 and 0mm all with mm bodies and M threads, suitable for securing into any of the Multi Purpose components with a mm thread. The threads are installed using the uniquely designed Rola Key. R4/0 40 R4/0 R4/0 0 R4/0 R4/0 R4/0 Rola MP - Body (mm Body, mm Screw, M Thread), B or CP R4/0 Rola MP - Body (mm Body, 40mm Screw, M Thread), B or CP R4/0 Rola MP - Body (mm Body, 0mm Screw, M Thread), B or CP R4/0 Rola MP - Body (mm Body, mm Screw, M Thread), B or CP
ROLA MULTI PURPOSE FASTENERS - THREADED INSERTS Rola Multi-Purpose are a variety of ten components, threads and fasteners that can be combined to be used in problem situations, for example, Stay Locks, Removable Grille and Access Panel Locks. R4/04 R4/0 R4/04 R4/04+R4/0 M for ood Only Dual Screws R4/ is not illustrated R4/ 4. R4/0. Shown here are the three threaded inserts for wood, two with tapered heads - M and M - and an M threaded fastener that can be placed at any depth. R4/04+R4/0 M R4/04+R4/0 for ood Only. M for ood Only Rola Multi Purpose threaded inserts for wood only. They are installed by drilling a.mm (M) or mm (M) hole. The threaded insert is then driven into the hole using a T handled Allen key. All products in the Rola range are operated by the uniquely designed Rola Key. Grille Locks Stay Lock for ooden indows R4/04 Rola ood Fastener - Threaded inserts (mm Screw, M Thread) R4/0 Rola ood Fastener - Threaded inserts (mm Screw with Tapered Head, M Thread) R4/ Rola ood Fastener - Threaded inserts (mm Screw with Tapered Head, M Thread) ROLA MULTI PURPOSE LOCKS - THREADED BLOCKS Rola Multi-Purpose are a variety of ten components, threads and fasteners that can be combined to be used in problem situations, for example, Stay Locks, Single and Double Sliding Patio Doors, Removable Grille and Access Panel Locks. R4/0 R4/0 40 Ø 4 Ø R4/0+R4/0 Shown here is the solid steel block, suitable for wood or metal it is cross-threaded with an M thread to be used with any of the four lengths of thread,, 40 and 0mm. See page. The cross-threaded steel block is surface mounted onto any substrate using the most suitable fixing - screws, bolts, rivets or welding. R4/0+R4/0 R4/0+R4/0 Stay Lock for ooden indows All products in the Rola range are operated by the uniquely designed Rola Key. Lock for Single Sliding Patio Door Lock for Double Sliding Patio Door R4/0 Rola ood or Metal Fastener - Threaded Block (Cross Threaded, M Thread)
ROLA MULTI PURPOSE FASTENERS - FOR SHEET MATERIALS R4/0 R4/0. Multi-Purpose are a variety Rola of ten components, threads and fasteners that can be combined to be used in problem situations, for example, Removable Grille and Access Panel Locks fitted to UPVC or sheet materials. Insert into hole M M Stays in place R4/0 R4/0 0. sheet metal fasteners are The held in position by placing them in accurately drilled holes and then expanding them behind the hole by driving a screw into the integrated nut. and if applicable, fixing instructions.. Drive screw 0.... Shown here are the two inserts, M and M, for sheet materials or extrusions, especially UPVC or aluminium. R4/0 R4/0. Lock in place Sequence to insert fixings into sheet material M M R4/0 Rola UPVC or Aluminium Fasteners (M Thread) Off R4/0 Rola UPVC or Aluminium Fasteners (M Thread) Off ROLA HINGE BOLT R/0 R/0 Rola Hinge Bolt consists of a The steel pin and plate specifically designed to secure outward opening front doors where the door hinges are visible and open to attack. However they are often used as standard on inwardly opening doors. Fit approximately 0mm above hinges pins are driven into tight The holes on the door edge R/0 approximately 0mm above the door hinges. Carefully closing the door will mark the frame and indicate the position of the plate's centre. The plate is then recessed into the door frame with an oval clearance hole underneath and secured with the screws supplied. R/0 Rola Hinge Bolt - Plate, Pin and Screws, B or R/0 (R/0 in volume) Rola Hinge Bolt - Plate, Pin and Screws, B or x 00 packs
ROLA KEYS Keys operate all Rola Rola products. R/04 available in three sizes: They are Short; mm shank R/0 R/0 Standard; 0mm shank Long; mm shank or longer keys are Shorter available for special installations. codes relate to each product and also to how they are supplied; packed singly, packed in multiples or loose. See list of options. here Rola s are packed, this includes a display header card and if applicable, fixing instructions. R/0 R/0 Rola Keys - Standard (0mm Shank) R/0 Rola Key - Standard (0mm Shank) Loose R/0 Rola Keys - Short (mm Shank) R/04 Rola Keys - Long (mm Shank) R/0 Rola Keys - Short (mm Shank) Loose R/0 Rola Keys - Long (mm Shank) Loose R/0 (R/0 in volume) Rola Keys - Standard (0mm Shank) x 00 packs ROLA FITTING TOOLS T Handled Allen Keys Rola provide sufficient torque to R/0 drive threaded inserts into timber. in two sizes: They are Toavailable install M inserts (R4/0) or M inserts (R4/04 and R4/). R/0 R/0 Rola "T" Handle Allen Key for M threaded inserts BL R/0 Rola "T" Handle Allen Key for M threaded inserts BL
This product range has been and continues to be developed to provide security solutions that meet the many and varied buildings, designed with limited or no consideration for window or door security. If you have a security problem, please ask. e may have come across it before. HERE TO FIND US Baker Street Luxborough St. Nottingham Pl. Oldbury Pl. Nottingham St. Paddington St. Marylebone High St. Beaumont St. Devonshire Pl. Harley St. Devonshire St. eymouth St. Devonshire Pl. BRAMAH SECURITY EQUIPMENT LIMITED Marylebone - Inner London - Sales Office - Trade Counter Oldbury Place London U PT telephone + 44 (0) 00 4 facsimile + 44 (0) 0 Romford - Essex - Manufacturing Site - Trade Counter Danes Road Romford Essex RM 0HL telephone + 44 (0) 00 0 facsimile + 44 (0) 0 E-mail lock.sales@bramah.co.uk web www.bramah.co.uk