Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header

Similar documents
Setting Standards Connectors M 16

SB 50 Connectors - up to 120 amps

Powerpole Connectors - PP75: up to 120 Amps

Powerpole Connectors - PP75: up to 120 Amps

Powerpole Connectors - PP75: up to 120 Amps

sealed mini usb connectors

SIGNAL // POWER // INDUSTRIAL ETHERNET

HARAX. Contents Technical characteristics circular connector with HARAX rapid termination 50.02

Operating tools. with partially insulated shaft Type 1, 2 and 3 in set

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7

SBS Connectors - up to 110 amps

Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics

The series terminals are state of the art based on technical enhancements, changes in power engineering, their applications and properties.

Data sheet. W-Series WDU 2.5

Poke-Home: Inverted Thru Board AWG: WTB INTER CONNECT FEATURES AND BENEFITS APPLICATIONS ELECTRICAL MECHANICAL ENVIRONMENTAL

REFLOW TECHNOLOGY. Product Overview

both pin and sleeve contacts.

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size

Reflow Technology Product Overview

MULTI CONNECTION SYSTEM. Product Overview

SPRING CLAMP TERMINAL

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded

CONTA-CON P.C. BOARD CONNECTORS

AVX Wire-to-Board Connectors

Standard AWG: WTB

OptiLine 45 Floor boxes

Through and Ground Conductor Terminal Blocks 290 Series

SW 16mm. SW 15mm. SW 19mm

MKDS 3/ 4. Extract from the online catalog. Order No.:

SBS Connectors - up to 110 amps

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order

SMKDSP 1,5/ 8. Extract from the online catalog. Order No.:

FRONT 2,5-H/SA 5. Extract from the online catalog. Order No.:

Data sheet. W-Series WDU 4 BL

DIK 1,5 General data Technical data General

Contents. Han Hv ES / Han Hv E Technical characteristics Han Hv ES Technical characteristics Han Hv E Han 3 Hv ES

Data sheet. W-Series WDU 10

Data sheet... W-Series WDU 2.5

Data sheet. W-Series WDU 2.5 RT

Poke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X

JULY 2014 SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2.

WINSTA The Connection System. Full Line Catalog 2010/2011

Automation and Network Solutions. Entertainment in Series Round Connectors by HIRSCHMANN.

MKKDSH 3/ 2. Extract from the online catalog. Order No.:

Medium-base Lampholders

Specifications Approval Type M12 A-coded HARAX M12-L HARAX M12 L 5 poles shielded M12 Crimp General data Electrical characteristics Materials 03 21

SERIESN50, COAXIAL CONNECTORS

COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2

SMT TR series. Surface mount tiny washable rocker switches. Distinctive features and specifications.

Signal converter for electromagnetic flowmeters

SMKDS 2,5/ 2-5,08. Extract from the online catalog. Order No.:

HARTING Han GND. People Power Partnership

Current / residual current and voltage transformers. Current / residual current and voltage transformers

Data sheet. M12 Jack X-coded IP67, field assembly. Illustrations P/N MMF881A315 EAN Product specification. Page 1/

2/2 Introduction. Unequipped Distribution Boards 2/5 8GK1 surface and flush-mounting distribution boards

Datenblatt. W-Series WDU 10

Electronic Circuit Breaker with reset input ESS20-1..

SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2. 3 Ratings 3

1/4" and 3.5 mm Phone Plugs

ELECTRICAL INFORMATION K012-A135-MP5.0/02 2 K012-A135-MP5.0/03 3. Molding Nylon PA66 to UL94, V-O Colour Green. Torque 3.5 lbs-in

TWO PIECE / PLUGGABLE CONNECTORS

SLKK 5. Extract from the online catalog. Order No.:

General data. Technical data DIKD 1,5. General. Dimensions

Datenblatt. W-Series WDU 2.5

Customer Premise. Solutions for. Solutions for Customer Premise include products ranging from wall distribution to system distribution boxes.

EP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE

ALPHA DIN Wall-Mounted. Distribution Boards

VARIOCON. Modular Contact Inserts

2.5mm Pitch Connector for Discrete Wire Connection

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color All Sizes 9 = UL White (Standard) 8 = UL Black (Special Order)

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size

5/2 Introduction. Unequipped Distribution Boards 5/4 Modular distribution boards 5/5 Add-on parts

HQ series the powerful little connectors

SBS 75x. Connector Series PRODUCT SPECIFICATIONS

2.5mm Pitch Connector for Discrete Wire Connection

4/2 Introduction. Marshaling Boxes 4/8 8GK1 surface-mounting distribution boards

5mm Pitch Miniature Potting Connectors for Secondary Power Supply

ZUCCHINI MS - LOW TO MEDIUM POWER BUSBAR

Connect - Contact - Control. Connectors. Short Form Catalogue

DEHN + SÖHNE. DEHNiso Distance Holder: The Modular Lightning Protection System.

KO4070 Series. MOUNTING The KO4070 series have integral mounting feet that snap onto standard 35mm DIN rail. They cannot be panel mounted.

MCR-SL-CUC Universal current transducer. Data sheet _en_05. 1 Description

General characteristics and technical data Series VarioPro Basic

HARTING Han-Power T Solutions

SECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214

2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical

Varicon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27

DRIVIA cabinets LIMOGES Cedex France 1. DESCRIPTION, USE 3. DIMENSIONS 2. RANGE, CAT. NO. EQUIVALENCE TABLE

M20 Connectors Specification

SINGLE POLE SOCKETS - SOLDER MOUNT

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order Ø Ø Ø

TNC SERIES General... 4 Interface... 5 Characteristics...6-7

MKDSN 1,5/ 4-5,08. Extract from the online catalog. Order No.:

Nemalux INSTALLATION INSTRUCTIONS APPLICATION 1-4

TED-300-OG- SMC ORDERING GUIDE FOR Single Wire & Multipair Connectors

Mini Contactors. Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks. Interface Contactor Relays. Mini Contactors 10 Auxiliary Contact Blocks

Varicon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27

- 1 - General ordering data Order No

ELECTRICAL INSTALLATION PRODUCTS Splicing Connectors and Chassis Mount Terminal Blocks

EuroMag Series PCB Mount Terminal Blocks. EM3123 Series Euro-Mag Terminal Blocks 3.50 Centers; Modular. Part Numbering System

Transcription:

Pluggable PCB terminals and headers Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header System features plug in system is simple to maintain screw termination by means of rising cage clamp for security screw connection is easy to operate spring clamp connection for speed comprehensive range means that the direction of insertion/withdrawal and conductor guide methodology can be individually matched to the application simple, clear and secure method of connecting and disconnecting multiple pole configuration connection of single core and finely stranded conductors up to 1. mm and. mm metric and imperial pitch options The pitch measured in inches can be identified by a pip on the conductor guide funnel clamping with TOP connection PCB terminals with closed side walls: ensure no miss-connection PCB terminals with open side walls enable expansion with no effect on the pitch to the circuit board pitch options:.1/. 00/.0/././.00/.1 mm two tier headers Flange version terminal connectors and headers can also incorporate additional fixing elements such as screw flanges which helps prevent them being separated accidentally secure electrical and mechanical connection even under shock and vibration Coding a coding system is available to prevent the connection of non-interchangeable components. The coding parts can be inserted into special slots in either or both the terminal connector and header coding does not effect number of available poles coding possible with a minimum of poles Marking clear pole marking which is easy to read enabling easy connection by means of ink jet printing directly onto the terminal connector using indelible ink special marking is possible on request Applications designed for frequent and ongoing equipment maintenance and system changes as the pluggable terminal connector and PCB header are easily connected and disconnected prefabricated wiring arrangements can be easily interfaced to connect and enable the system DQS certification for all product areas Quality standard in accordance with DIN ISO 001 In development, production and installation Continued control of the quality standard by means of regular internal and external quality audits Compatible with certificates of other countries: BSI, Great Britain SQS, Switzerland Aib-Vincotte, Belgium ÖQS, Austria Type range - pole different variants of terminals and headers allow for horizontal, vertical and angled connection of wiring in relation to the PCB (eg. )

wiecon System 1 mini-pcb terminals to 0 pole terminal and header horizontal or vertical in relation to the PCB total design height: mm, of which only mm is above the PCB in the space saving.1 mm pitch conductor size 1. mm suitable for coding: plug terminal with coding pins socket header with coding channels also with locking flange Panel mount header header can be inserted in the unit wall (see inset) plug in connection through the wall header = bush housing threaded bush for vibration resistant screw connection of flange designs can be screwed to the housing wall connecting wiring inside the housing via termi-point or solder connection Inverted version solderable terminal as header with straight and angled socket solder pins can be coded using coding parts in special slots the mounting holder enables locking with the header Top version screw connection and conductor feed in line with connection plug with connection in line with conductor very easy to use in restricted installation conditions with and without integral LED Special types for the control panel: terminal blocks with integral header assembles to.00 mm-pitch can be mounted on DIN rail terminals with header for system with vertical socket outlet with horizontal socket outlet Materials Metal components made from special alloys and/ or special surface treatments for: clamping part and clamping screw: made from nickel plated brass top version: galvanised and chromated steel socket contact: tinned bronze header and solder pins: made from a high quality copper alloy minimum contact resistance high corrosion protection secure, dynamic clamping function Insulating housing: Polyamide /, used on account of its excellent electrical, chemical and mechanical properties (see facts & DATA section) material in accordance with UL V-0 colour grey, similar to RAL 0 glass filled for additional reinforcement (no glass reinforcement in tiertype header and solderable parts) Abbreviations for plastic material markings: PA / = Polyamide / PC = Polycarbonate PBT = Polybutylenterephthalate Note: The conductor size and connecting capacity relate to unprepared conductors without ferrules. The rated current specified corresponds to the maximum load of PCB terminal with connected conductor with the given conductor size. The rated voltage is specified in accordance with DIN VDE 01 Part 1 (IEC 0-1) Insulation coordination for electrical equipment in low voltage installations and refers to the received condition of the PCB terminals. When fitting PCB terminals to the PCB, the appropriate PCB must be selected and given the relevant dimensions (e.g. as regards the resistance of the PCB to creepage, spacing of the conductors and soldering pads). In addition, the influences of the environment (level of pollution) to which the equipment is to be exposed are to be taken into account. The specified rate voltages for the whole module only apply if the PCB and PCB terminal have been matched correctly and carefully.

Pluggable PCB terminal, rising cage clamp system, pitch./.1 mm 1. mm Rated cross section: 1. mm A Wire range: 0.1 1. mm single core/finely stranded V/. kv/ overvoltage category III V/. kv/ overvoltage category II *0 V/. kv/1 overvoltage category I * max. 00V for non earthed systems or expected overvoltage kv for L.00 mm and. kv for.0 mm > L 1. mm Rated voltages VDE 01 Pitch. mm 1.0 0.0.0.0 1.0.0.0 1.0.0.0.0.0.0.0.0.00. 1.00 1. 1.00..00 1..00..00..00..00..00. 1.00 1. 1.00..00 1..00..00..00. 1 1 1 1 M. Type 1 B/..., 1 B/... Connection in line with conductor No. 0 1 AWG 00 V A No. 1 AWG 00 V A qw.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.1.0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0..0.0..0.0..0.0.1.0.0.1.0.0.1.0.0.1.0 with screw flange Type 1 B/...F, 1 B/...F Connection in line with conductor No. 0 1 AWG 00 V A No. 1 AWG 00 V A Box Qty GFL G T Pole Part No. Part No. Part No. Part No. qw.1..0.1..0.1..0.1..0.1..0.1..0.1..0.1..0.1.0.0.1.1.0.1..0.1..0.1..0.1..0.1..0 M..1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1..0.1..0.1..0.1.1.0.1.1.0.1.1.0.1.1.0 Pitch.1 mm 1.01 1...1. 1.0.1...0..0.0..0.0..0.0.0.0.0.0.0.0.0.0.1..0.1..0.1..0.1.0.0.1.0.0.1.0.0...0 1... 1. 1.0..0..0.0..0.0..0.0.0.0.0.0.0.0.0.0.1..0.1..0.1..0.1.0.0.1.0.0.1.0.0 0... 1..0.. 0...0..0.0..0.0.0.0.0.0.0.0.0.0.0..0.1..0.1..0.1.0.0.1.0.0.1.0.0.1..0.0...0.1.. 1.1. 1.0.1.0.0..0.0..0.0..0.0..0.0.1.0.1.1.0.1..0.1..0.1..0.1..0.1.1.0.. 1..1. 1....1 1 1 1.0..0.0..0.0..0.0.1.0.0.1.0.0.1.0.1..0.1..0.1..0.1.1.0.1.1.0.1.1.0 0

wiecon Pluggable PCB terminals, spring clamp system, pitch. mm 1. mm Rated cross section: 1. mm A Wire range: 0.1 1. mm single core/finely stranded V/. kv/ overvoltage category III V/. kv/ overvoltage category II *0 V/. kv/1 overvoltage category I * max. 00V for non earthed systems or expected overvoltage kv for L.00 mm and. kv for.0 mm > L 1. mm Type 1 BFK Type 1 SUFK VDE 01 Pitch. mm.0.0 1.0 1.0 0.0.0.0 1.0.0.0 1.0.0.0.0.0..00. 1.00 1. 1.00..00 1..00..00..00. 1 1 1 1 No. 0 1 AWG 00 V A No. 1 AWG 00 V A qw.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.1.0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0..0.0..0.0..0.0.1.0.0.1.0.0.1.0.0.1.0 No. 0 1 AWG 00 V A No. 1 AWG 00 V A Box Qty G T Pole Part No. Part No. Part No. Part No. Type 1 BFK qw Pitch. mm Type 1 SUFK.0.0 1.0..00....0...0...0..0.0..0.0..0.0 1.0.0.0 1.00 1. 1.00...0...0...0..0.0..0.0..0.0.0.0.0..00 1....0...0..0.0..0.0..0.0...0.0.0.0.00..00 1..1.0...0...0...0...0..1.0.0.0.0..00. 1 1 1...0...0...0..1.0..1.0..1.0 DIN A 0. x. 0..00.0 1

Pluggable PCB terminals, rising cage clamp system, Pitch.1 mm 1. mm Rated cross section: 1. mm A Wire range: 0.1 1. mm single core/finely stranded V/. kv/ overvoltage category III V/. kv/ overvoltage category II *0 V/. kv/1 overvoltage category I * max. 00V for non earthed systems or expected overvoltage kv for L.00 mm and. kv for.0 mm > L 1. mm M. M. Rated voltages VDE 01 Pitch.1 mm 1.01 1.....0 0....0.... 1..1. 1.0 1... 1..0..0.1..1. 1..1.. 1. 1.0.. 0... 1.1....1 1 1 1 1 Type 1 B/... VR Connection at 0 to conductor No. 0 1 AWG 00 V A No. 1 AWG 00 V A igqw...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0..1.0..1.0..1.0..1.0 Type 1 B/... VL Connection at 0 to conductor No. 0 1 AWG 00 V A No. 1 AWG 00 V A igqw Box Qty GFL G T Pole Part No. Part No. Part No. Part No....0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0..1.0..1.0..1.0..1.0

wiecon with screw flange Type 1 B/... VR F Connection at 0 to conductor M. with screw flange Type 1 B/... VL F Connection at 0 to conductor M. No. 0 1 AWG 00 V A No. 1 AWG 00 V A igqw...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0..1.0..1.0..1.0.0.1.0 No. 0 1 AWG 00 V A No. 1 AWG 00 V A igqw Part No. Part No. Part No. Part No....0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0..1.0..1.0..1.0..1.0

PCB headers, pitch./.1 mm 1. mm A V/. kv/ overvoltage category III V/. kv/ overvoltage category II *0 V/. kv/1 overvoltage category I for type 1 have been applied for * max. 00V for non earthed systems or expected overvoltage kv for L.00 mm and. kv for.0 mm > L 1. mm Solder pin 0. x 0. mm Bore hole Ø 1. mm Solder pin 0. x 0. mm Bore hole Ø 1. mm Rated voltages VDE 01 Pitch. mm 1.0 0.0.0.0 1.0.0.0 1.0.0.0.0.0.0.0.0.0.0 1.0 1.0.0.0.0.0.0.0.0.0.0.0.0..00. 1.00 1. 1.00..00 1..00..00..00. 1 1 1 1 Type 1 S/... G, 1 S/... G Connection vertical to PCB qw..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0..1.0..1.0..1.0..1.0 00 V A 00 V A Type 1 S/... W, 1 S/... W Connection horizontal to PCB Box Qty GFL G T Pole Part No. Part No. Part No. Part No. qw..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0..1.0..1.0..1.0..1.0 00 V A 00 V A Pitch.1 mm 1.01 1...01. 1..1....0.0..0.0..0.0..0.0..0.0..0.0...0 0...0 1. 1.0...0.0..0.0..0.0..0.0..0.0..0.0 0... 1.... 0....0.0..0.0...0..0.0..0.0...0.0...0... 1.1. 1...0...0..1.0...0...0..1.0.. 1.......1 1 1 1..1.0..1.0..1.0..1.0..1.0..1.0 Coding part (branch) 0.1.00.0 0.1.00.0 When using coding parts, the coding fins on the terminal connector should be removed

wiecon with screw flange with screw flange Solder pin 0. x 0. mm Bore hole Ø 1. mm Type 1 S/... GF, 1 S/... GF Connection vertical to PCB Solder pin 0. x 0. mm Bore hole Ø 1. mm Type 1 S/... WF, 1 S/... WF Connection horizontal to PCB qw...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0 00 V A 00 V A qw Part No. Part No. Part No. Part No....0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0 00 V A 00 V A...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0 0.1.00.0 0.1.00.0

Pluggable PCB terminals, rising cage clamp, pitch.00/.0 mm. mm Rated cross section:. mm A Wire range: 0.1. mm single core/finely stranded V/ kv/ overvoltage category III 00 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I Rated voltages VDE 01 0 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 1 1 1 1. Type B/... 1 B/... rconnection in line with conductor No. AWG 00 V 1 A No. AWG 00 V 1 A.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.1.0.0..0.0..0.0..0.0..0.0..0 No. AWG 00 V 1 A No. AWG 00 V 1 A Box Qty GFL G T Pole Part No. Part No. Part No. Part No. Pitch.00 mm Type 1 to pole on request M.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0..0.0..0.0..0.0.1.0.0.1.0.0.1.0.0.1.0...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0 M with screw flange Type B/... F, 1 B/... F Connection in line with conductor 1 to pole on request..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0..1.0..1.0..1.0..1.0 Pitch.0 mm Type 1 0..0 0..1 1. 0..0.1 1..0..0.0..0.0..0.0.0.0.0.0.0.0.0.0...0...0...0..0.0..0.0..0.0. 0...0 0.. 0..0 0..0..0.0..0.0..0.0.0.0.0.0.0.0.0.0...0...0...0..0.0..0.0..0.0.0. 0. 0...0. 0...0..0.0..0.0.0.0.0.0.0.0.0.0.0..0...0...0..0.0..0.0..0.0...0.0 1..0. 0..0.0. 0. 1.0.1.0.0..0.0..0.0..0.0..0.0.1.0..1.0...0...0...0...0..1.0 1.. 1. 1..0 1..0 1..0 1 1 1.0..0.0..0.0..0.0.1.0.0.1.0.0.1.0...0...0...0 1 to pole on request..1.0..1.0..1.0 Coding part (branch) 0.1.1.0 0.1.1.0

wiecon Rated cross section:. mm A based on ambient temperature of 0 C, rated cross-section and max. number of poles G T, Wire range: 0.. mm single core/finely stranded,0 1, V/ kv/ overvoltage category III 00 V/ kv/ overvoltage category II 00 V/ kv/1 overvoltage category I M, Type 1 B/...S Rated voltages VDE 01/1. Pitch.0 mm.1 1. 0..0 0.. 0...0. 0..0 1..0 1..0.1 1. 0..0 0.. 0...0. 0..0 1..0 1 1 1 1 No. AWG 00 V A No. AWG 00 V A qw Box Qty GFL G T Pole Part No. Part No..1..0.1..0.1..0.1..0.1..0.1..0.1..0.1..0.1.0.0.1.1.0.1..0.1..0.1..0.1..0.1..0 1 to pole on request Coding available upon request

Pluggable PCB terminals, rising cage clamp system, Pitch./. mm. mm Rated cross section:. mm A Wire range: 0.1. mm single core/finely stranded 00 V/ kv/ overvoltage category III 0 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I Rated voltages VDE 01. Type 1 B/..., 1 B/... Connection in line with conductor.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.1.0.0..0 M No. AWG 00 V 1 A No. AWG 00 V 1 A.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0..0.0..0.0..0 No. AWG 00 V 1 A No. AWG 00 V 1 A Box Qty GFL G T Pole Part No. Part No. Part No. Part No. Pitch. mm Type 1..0 0..0..0 0..0..0. 1.00 0..00..00..00..00 0..00. 1.00. 0.00..00. 0.00..00....0...0...0...0...0...0...0...0..0.0..1.0...0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0 M with screw flange Type 1 B/... F, 1 B/... F Connection in line with conductor Pitch. mm Type 1.. 0.0 1. 0... 1...0..0.0..0.0..0.0.0.0.0.0.0.0.0.0...0...0...0...0...0...0..1...0 1. 0....0..0.0..0.0..0.0.0.0.0.0.0.0.0.0...0...0...0...0...0...0 1..00....0. 0...0..0.0..0.0.0.0.0.0.0.0.0.0.0..0...0...0..0.0...0...0...0. 1. 1.0..0..0.1.0.0..0.0..0.0..0..1.0...0..1.0...0 Coding part (branch) 0.1.1.0 0.1.1.0

wiecon Pluggable PCB terminals, rising cage clamp system, Pitch.00/.0 mm. mm Rated cross section:. mm A Wire range: 0.1. mm single core/finely stranded V/ kv/ overvoltage category III 00 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I M M Rated voltages VDE 01 1 0 0 0 0 0 0.1 1. 0..0 0.. 0...0. 0..0 1..0 1. 1 0 0 0 0 0.0.1 1. 0..0 0.. 0...0. 0..0 1..0 1 1 1 1 1 to pole on request 1 1 1 1 No. AWG 00 V 1 A No. AWG 00 V 1 A...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0..1.0..1.0..1.0..1.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0..1.0..1.0..1.0..1.0 No. AWG 00 V 1 A No. AWG 00 V 1 A Box Qty G T Pole Part No. Part No. Part No. Part No. Pitch.00 mm Type Pitch.0 mm Type 1 1 to pole on request Type B/... VR, 1 B/... VR Connection 0 to conductor Type B/... VL, 1 B/... VL Connection 0 to conductor...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0..1.0..1.0..1.0..1.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0..1.0..1.0..1.0..1.0 Coding part (branch) 0.1.1.0 0.1.1.0

Pluggable PCB terminals, rising cage clamp system, pitch. mm. mm Rated cross section:. mm A Wire range: 0.1. mm single core/finely stranded 00 V/ kv/ overvoltage category III 0 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I M M Rated voltages VDE 01 Type 1 B/... VR Connection 0 to conductor No. AWG 00 V 1 A No. AWG 00 V 1 A Type 1 B/... VL Connection 0 to conductor No. AWG 00 V 1 A No. 1 AWG 00 V 1 A Box Qty G T Pole Part No. Part No. Part No. Part No. Pitch. mm Type 1 1. 0... 1.....0...0...0..0.0..0.0..0.0...0...0...0..0.0..0.0..0.0..0 1. 0......0...0...0..0.0..0.0..0.0...0...0...0..0.0..0.0..0.0...0. 0.....0...0..0.0..0.0..0.0...0...0...0..0.0..0.0..0.0...0 1.0..0...1.0...0...0...0..1.0...0...0...0 Coding part (branch) 0.1.1.0 0.1.1.0 0

wiecon Crimp connection Rated cross section:. mm A when using a 1.0 mm Leiter A when using a. mm Leiter Contact for wire range: 0. 1.0 mm finely stranded (Diameter of insulation 1.. mm) Wire range: 1.. mm finely stranded (Diameter of insulation 1..1 mm) V/ kv/ overvoltage category III 00 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I Type BK Rated voltages VDE 01 Pitch.00 mm 1 0 0 0 0 0 0 1 0 0 0 0 0 1 1 1 1 w Box Qty G T Pole Part No. Part No. Part No. Part No. 01.00..0 01.00..0 01.00..0 01.00..0 01.00..0 01.00..0 01.00..0 01.00..0 01.00.0.0 01.00.1.0 01.00..0 01.00..0 01.00..0 01.00..0 01.00..0 1 to pole on request 01.00.0.0 01.00.0.0 01.00.0.0 01.00.0.0 01.00.0.0 01.00.0.0 01.00.0.0 01.00.0.0 01.00..0 01.00..0 01.00..0 01.00.1.0 01.00.1.0 01.00.1.0 01.00.1.0 Crimp contacts Single contacts Single contacts 0 0 0. 1.0 mm 1.. mm 0...0 0..1.0 Strip Strip 000 0 0. 1.0 mm 1.. mm 0..100.0 0..100.0 Crimping tool: Crimping tool Crimp dies.1.000.0 0..0.0 1

Pluggable PCB terminals spring clamp system pitch.00/.0 mm Rated cross section*:. mm A Wire range: 0.1. mm single core/finely stranded V/ kv/ overvoltage category III 00 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I * When using ferrules for wire range. mm, only ferrules with part number. mm 0...0 should be used. Type /1 BFK Type /1 BFK.../F Rated voltages VDE 01 Pitch.00 mm Pitch.0 mm................0....0..1........ 1 0 0 0 0 0 0.1 1. 0..0 0.. 0...0. 0..0 1..0 1. 1 0 0 0 0 0.0.1 1. 0..0 0.. 0...0. 0..0 1..0 1 1 1 1 1 1 1 1 No. AWG 00 V A q.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.1.0.0..0.0..0.0..0.0..0.0..0 1 to pole on request.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.1.0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0..0.0..0.0..0.0.1.0.0.1.0.0.1.0.0.1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0..0.0..0.0..0.0.1.0.0.1.0.0.1.0.0.1.0 No. AWG 00 V A Box Qty GFL G T Pole Part No. Part No. Part No. Part No. 1 to pole on request.1..0.1..0.1..0.1..0.1..0.1..0.1..0.1..0.1.0.0.1.1.0.1..0.1..0.1..0.1..0.1..0 1 to pole on request.1..0.1..0.1..0.1..0.1..0.1..0.1..0.1..0.1.0.0.1.1.0.1..0.1..0.1..0.1..0.1..0 1 to pole on request.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1..0.1..0.1..0.1.1.0.1.1.0.1.1.0.1.1.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1..0.1..0.1..0.1.1.0.1.1.0.1.1.0.1.1.0

wiecon Pluggable PCB terminal - spring clamp system pitch.0 mm. mm Rated cross section*:. mm A Wire range: 0.1. mm single core/finely stranded V/ kv/ overvoltage category III 00 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I * When using ferrules for wire range. mm, only ferrules with part number. mm 0...0 should be used. Type 1 SUFK Rated voltages VDE 01 in preparation Pitch.0 mm.1 1. 0..0 0.. 0...0. 0..0 1..0 1..0.1 1. 0..0 0.. 0...0. 0..0 1..0 1 1 1 1 No. AWG 00 V A No. AWG 00 V A Box Qty G T Pole Part No. Part No. 1 to pole on request q...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0..1.0..1.0..1.0..1.0 Coding part (branch) Screwdriver DIN A 0. x. 0.1.1.0 0..000.0

Pluggable PCB terminal - spring clamp system pitch. mm Rated cross section*:. mm A Wire range: 0.1. mm single core/finely stranded 00 V/ kv/ overvoltage category III ** 0 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I * When using ferrules for wire range. mm, only ferrules with part number 0...0 should be used. ** max. 00 V for non-earthed systems or expected overvoltage kv for L.00 mm and. kv for.0 mm > L 1. mm Type 1 BFK Type 1 BFK/... F VDE 01 No. AWG 00 V A No. AWG 00 V A Pitch. mm Box Qty GFL G T Pole Part No. Part No. Part No. Part No... 0.0..1. 1..00.. 1. 1. 0....0 1....0 1.0.. 1.. 0.... 0...0..0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.1.0.0..0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0..0.0..0.0..0.1..0.1..0.1..0.1..0.1..0.1..0.1..0.1..0.1.0.0.1.1.0.1..0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1..0.1..0.1..0

wiecon Pluggable PCB terminal, inverted header, solder version pitch.0 mm A V/ kv/ overvoltage category III *0 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I * max. 00V for non earthed systems or expected overvoltage kv for L.00 mm and. kv for.0 mm > L 1. mm Solder pin 0. x 1 mm Drill hole Ø 1. mm Solder pin 0. x 1 mm Drill hole Ø 1. mm Rated voltages VDE 01 Type 1 BL/... G Connection vertical to PCB 00 V 1 A 00 V 1 A Type 1 BL/... W Connection vertical to PCB Box Qty G T Pole Part No. Part No. Part No. Part No. 00 V 1 A 00 V 1 A Pitch.0 mm. 1...0.1 1....0...0...0..0.0..0.0..0.0...0...0...0..0.0..0.0..0.0.0.. 0..0 0....0...0...0..0.0..0.0..0.0...0...0...0..0.0..0.0..0.0...00. 0.....0...0..0.0..0.0..0.0...0...0...0..0.0..0.0..0.0...0.0.1..0. 0. 1..1.0...0...0...0...0..1.0..1.0...0...0...0...0..1.0..0..0 1..0 1 1 1 1 to pole on request...0...0...0..1.0..1.0..1.0...0...0...0..1.0..1.0..1.0 Coding part (branch) Mounting bracket 0.1.1.0 Z...0 0.1.1.0 Z...0

Pluggable PCB terminals, TOP connection system pitch.00/.0 mm Rated cross section:. mm A, On state current. ma per LED Rated voltages: Type B/... TOP, 1 B/... TOP V/ kv/ overvoltage category III 00 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I Type B/... TOP LED V/ kv/ overvoltage category III V/ kv/ overvoltage category II V/ kv/1 overvoltage category I Wire range: 0.1. mm single core/finely stranded M.. TOP connector with LED common negative pole M.. Rated voltages VDE 01 Pitch.00 mm 00 00 00 1 0 0 0 0 0 0 1 0 0 0 0 0 1 1 1 1 to pole on request Type B/... TOP, 1 B/... TOP Connection in line with conductor No. AWG 00 V 1 A No. AWG 00 V 1 A.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.1.0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0..0.0..0.0..0.0.1.0.0.1.0.0.1.0.0.1.0 No. AWG V 1 A No. AWG V 1 A Box Qty TOP G T Pole Part No. Part No. Part No. Part No. Type B/... TOP LED Connection in line with conductor.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.1.0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0..0.0..0.0..0.0.1.0.0.1.0.0.1.0.0.1.0 Pitch.0 mm 00.1 1. 0..0.1 1..0..0.0..0.0..0.0.0.0.0.0.0.0.0.0 00 00.0 0.. 0..0 0..0..0.0..0.0..0.0.0.0.0.0.0.0.0.0 0...0. 0...0..0.0..0.0.0.0.0.0.0.0.0.0.0..0. 0..0.0. 0. 1.0.1.0.0..0.0..0.0..0.0..0.0.1.0 1..0 1..0 1..0 1 1 1 1 to pole on request.0..0.0..0.0..0.0.1.0.0.1.0.0.1.0

wiecon PCB headers pitch.00/.0 mm A V/ kv/ overvoltage category III 00 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I Drill hole Ø 1. mm Drill hole Ø 1. mm Rated voltages VDE 01 Pitch.00 mm.1 1. 0..0 0.. 0...0. 0..0 1..0 1. 1 0 0 0 0 0 1 1 1 1 1 to pole on request closed version Type S/... G, 1 S/... G Connection vertical to PCB.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.1.0.0..0.0..0.0..0.0..0.0..0 00 V 1 A 00 V 1 A open version Type S/... GOF, 1 S/... GOF Connection vertical to PCB Box Qty G T Pole Part No. G T Part No. 1 0 0 0 0 0 0 1 0 0 0 0 0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0...0...0...0.1..0.1..0.1..0.1..0 00 V 1 A 00 V 1 A 1 to pole on request Pitch.0 mm. 1. 1..0.1 1....0...0...0.1 1. 0..0.1 1....1...1...1.0 1.. 0..0 0....0...0...0.0 0.. 0..0 0....1...1...1.0..0. 0.....0...0..0.0 0...0. 0.....1...1.0..1....0. 0. 1..1.0...0...0. 0..0.0. 0..1..1...1...1..0..0 1..0 1 1 1 1 to pole on request...0...0...0 0..0 0..0 1..0...1...1...1 1 to pole on request Coding part (branch) Mounting bracket assembly - for double ended screw fixing of header 0.1.00.0 Z...0 0.1.00.0

PCB headers pitch.00/.0 mm A Rated voltages: V/ kv/ overvoltage category III 00 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I Drill hole Ø 1. mm Drill hole Ø 1. mm Rated voltages VDE 01 Pitch.00 mm Pitch.0 mm.0 1.0 1.0.0 1.0.0 1.0.0 1.0.0 1.0.0 1.0.0 1.0 1 0 0 0 0 0..0 1..1 1. 1..0 0. 1..0. 0..0.. 0..0...0... 0...0.0 1...0 1 1 1 1 1 1 1 1 with screw flange Type S/... GF, 1 S/... GF Connection vertical to PCB...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0 1 to pole on request...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0 00 V 1 A 00 V 1 A Box Qty G T Pole Part No. GFL T Part No. closed version Type S/... W, 1 S/... W Connection horizontal to PCB 0 0 0 0 0 0 0 0..0 0.. 0...0. 0..0 1..0 1.. 1. 1 0 0 0 0 0.0.1 1. 0..0 0.. 0...0. 0..0 1..0...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0 00 V 1 A 00 V 1 A 1 to pole on request 1 to pole on request 1 to pole on request Coding part (branch) Mounting bracket assembly - for double ended screw fixing of header 0.1.00.0 Z...0 0.1.00.0 Z...0

wiecon PCB header pitch.00/.0 mm A V/ kv/ overvoltage category III 00 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I Rated voltages VDE 01 Pitch.00 mm.0 1.0 1.0.0 1.0.0 1.0.0 1.0.0 1.0.0 1.0.0 1.0 1 0 0 0 0 0 1 1 1 1 1 to pole on request iqwd...0...0...0...0...0...0...0...0.0..0.1..0...0...0...0...0...0 Drill hole Ø 1. mm open version Type S/... WOF, 1 S/... WOF Connection horizontal to PCB 00 V 1 A 00 V 1 A with screw flange Type S/... WF, 1 S/... WF Connection horizontal to PCB Box Qty G T Pole Part No. GFL G T Part No. 0 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 Drill hole Ø 1. mm...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0 00 V 1 A 00 V 1 A 1 to pole on request Pitch.0 mm..0 1..1 1. 1..0...0...0.. 0..0 0..1 1. 0..0.1 1....0...0...0.0 0. 1..0. 0..0...0...0... 0...0 0.. 0..0 0....0...0...0.0.. 0..0..0...0......0. 0. 0...0. 0.....0...0..0.0..0... 0. 1.......1...0 1..0. 0..0.0. 0...1.0...0...0..0.0 1...0 1 1 1 1 to pole on request.1...1...1.. 1.. 1. 1..0 1..0 1..0...0...0...0 1 to pole on request Coding part (branch) Mounting bracket assembly - for double ended screw fixing of header 0.1.00.0 Z...0 0.1.00.0

PCB headers pitch./. mm A V/ kv/ overvoltage category III 00 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I Drill hole Ø 1. mm Drill hole Ø 1. mm Rated voltages VDE 01 1.0 1.0.0.0.0 1.0.0.0.0 1.0.0. 1.00. 0.00..00. 0.00..00. closed version Type 1 S/... G, 1 S/... G Connection vertical to PCB.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.1.0.0..0 00 V 1 A 00 V 1 A with screw flange Type 1 S/... GF, 1 S/... GF Connection vertical to PCB Box Qty G T Pole Part No. GFL T Part No. Pitch. mm..0 0..0..0 0..0..0.. 1.00. 0.00..00. 0.00..00....0...0...0...0...0...0...0...0..0.0..1.0...0 00 V 1 A 00 V 1 A Pitch. mm 1. 1... 1...0..0.0..0.0..0.. 0.0. 1.....0...0...0.1.0. 0....0..0.0..0.0..0..1. 0......0...0...0 0.0... 0...0..0.0..0.0.0.0 1..00.. 0.....0...0..0.0.0 0..0..0.1.0.0..0. 1..0...1.0...0 Coding part (branch) Mounting bracket assembly - for double ended screw fixing of header 00 0.1.00.0 Z...0 0.1.00.0

wiecon PCB headers pitch./. mm A 00 V/ kv/ overvoltage category III 0 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I Drill hole Ø 1. mm Drill hole Ø 1. mm Rated voltages VDE 01 Pitch. mm 1.0 1.0.0.0.0 1.0.0.0.0 1.0.0. 1.00. 0.00..00. 0.00..00. closed version Type 1 S/... W, 1 S/... W Connection horizontal to PCB...0...0...0...0...0...0...0...0..0.0..1.0...0 00 V 1 A 00 V 1 A with screw flange Type 1 S/... WF, 1 S/... WF Connection horizontal to PCB Box Qty G T Pole Part No. GFL T Part No...0 0..0..0 0..0..0.. 1.00. 0.00..00. 0.00..00....0...0...0...0...0...0...0...0..0.0..1.0...0 00 V 1 A 00 V 1 A Pitch. mm 1..1.. 1.....0...0...0.. 0.0. 1.....0...0...0..00. 0......0...0...0..1. 0......0...0...0 0.... 0.....0...0..0.0 1..00.. 0.....0...0..0.0. 0..0...1.0...0. 1..0...1.0...0 Coding part (branch) Mounting bracket assembly - for double ended screw fixing of header 0.1.00.0 Z...0 0.1.00.0 01

PCB headers pitch.00/.0 mm A V/ kv/ overvoltage category III 00 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I Drill hole Ø 1. mm Drill hole Ø 1. mm Rated voltages VDE 01 Pitch.00 mm.0 1.0 1.0.0 1.0.0 1.0.0 1.0.0 1.0.0 1.0.0 1.0 1 0 0 0 0 0 1 1 1 1 closed version Type S/... S, 1 S/... S Connection at to PCB...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0 00 V 1 A 00 V 1 A open version Type S/... S1, 1 S/... S1 Connection at to PCB Box Qty G T Pole Part No. G T Part No. 1 to pole on request.0 1.0 1.0.0.0.0.0.0.0.0.0.0.0.0.0 1 0 0 0 0 0...0...0...0...0...0...0...0...0..0.0..1.0...0...0...0...0...0 00 V 1 A 00 V 1 A Pitch.0 mm. 1. 1..0.1 1....0...0...0. 1. 1..0.1 1....0...0...0.0 1.. 0..0 0....0...0...0.00 0.0.1 0..0 0....0...0...0 1...00. 0.....0...0..0.0 0...0. 0.....0...0..0.0.0.1..0. 0. 1..1.0...0...0. 0...0. 0...1.0...0...0..0..0 1..0 1 1 1...0...0...0 0..0 0..0 1..0...0...0...0 1 to pole on request Coding part (branch) 0.1.00.0 0.1.00.0 0

wiecon PCB headers pitch.00/.0 mm A V/ kv/ overvoltage category III 00 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I Drill hole Ø 1. mm Drill hole Ø 1. mm Rated voltages VDE 01 Pitch.00 mm x x Type SE/... G, 1 SE/... G Connection vertical to PCB iqwd...0...0 00 V 1 A 00 V A Type SE/... W, 1 SE/... W Connection horizontal to PCB iqwd Box Qty T Pole Part No. Part No....0...0 00 V 1 A 00 V A Larger pole numbers can be achieved by latching together Pitch.0 mm.0.1 x x...0...0...0...0 Larger pole numbers can be achieved by latching together End plate Mounting bracket assembly - for double ended screw fixing of header 0...0 0...0 on request Only in connection with end plate 0...0 Z...0 0

PCB Headers pitch.00/.0 mm G, G A T V/ kv/ overvoltage category III 00 V/ kv/ overvoltage category III 00 V/ kv/ overvoltage category II,00,0 T 0,00 0,, 1 SEG,00,0 >PBT<,00,1,, Drill hole Ø 1. mm Drill hole Ø 1. mm Rated voltages VDE 01 Pitch.00 mm Pitch.0 mm 1.1 1...0.....0...0..0. 1 0 0 0 0 0.0.1 1. 0..0 0.. 0...0. 0..0 1..0 1 1 1 0 0 1 to pole on request 1 1 1 0 0 Type 1-1 SEG.../G qw..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0..1.0..1.0..1.0..1.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0..1.0..1.0..1.0..1.0 00 V A 00 V A qw Box Qty G T Pole Part No. Part No. 1 to pole on request Type 1-1 SEG.../W..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0..1.0..1.0..1.0..1.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0...0...0...0..1.0..1.0..1.0..1.0 00 V A 00 V A 0 Coding available on request Coding available on request

wiecon Headers for panel mounting, pitch.0 mm cable kodierbar size Wire wrap connection 1 x 1 Max. diameter of interconnecting wire Ø: 0. mm. A Solder connection Rated cross section 1. mm single core/ 1.0 mm finely stranded A Plug connection. x 0. DIN Rated cross section 1.0 mm finely stranded A V/ kv/ overvoltage category III 00 V/ kv/ overvoltage category II 0 V/ kv/1 overvoltage category I Rated voltages VDE 01 Pitch.0 mm 0.. 0...0. 0..0 1..0 1.. 1.. 1.0.0.1 1. 0..0 0.. 0...0. 0..0 1..0 1 1 1 1 1 to pole on request Wire-Wrap Type 1 S/... DFWW, 1 S/... DFWW M No. AWG 00 V. A No. AWG 00 V. A iqwd.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0..0.0..0.0..0.0.1.0.0.1.0.0.1.0.0.1.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1.0.0.1..0.1..0.1..0.1.1.0.1.1.0.1.1.0.1.1.0 with press in nut for screw flange Type 1 S/... DFLS, 1 S/... DFLS M No. AWG 00 V / A No. AWG 00 V / A iqwd Box Qty G T Pole Part No. Part No. Part No. Part No. without press in nut with solder connection.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0..0.0.0.0.0.1.0.0..0.0..0.0..0.0..0.0..0 without press in nut.1..0.1..0.1..0.1..0.1..0.1..0.1..0.1..0.1.0.0.1.1.0.1..0.1..0.1..0.1..0.1..0 with press in nut for screw flange Dimensions for panel cut out a 1.1 1.........0..0.1..0 b 0..0 0.. 0...0.0 0..0 1..0 1.. 1. 1 1 1 1 1 to pole on request Coding part (branch) 0.1.00.0 0.1.00.0 Screw assembly Z.0.0.0 Z.0.0.0 0

Accessories for 1/1 and 1 BL Drilling plan for mounting bracket Z...0 Type SE/... and 1 SE/... A B..00 1..0 Drilling plan for mounting bracket Z...0 Type 1 1 S/... A B.1.00 1..0 1.. 1.. 1/1 1 BL Mounting bracket (Type 1) Part No. Box Qty Part No. Box Qty Z...0 Adhesive marking strips for socket connectors and headers with /.0 mm pitch End plate for two tier header (Type 1 SE) 0...0 Coding branch for header (Type 1, Type 1) socket connector (Type 1) 0.1.00.0 a 0.1.1.0 1 0.00.0.0 1 1 0.00.1.0 1 0.00..0 1 0.00..0 1 0 0.00..0 1 1 0.00..0 1 0.00..0 1 0.00..0 1 0.00..0 1 Mounting bracket Mounting bracket assembly for headers Mounting bracket assembly with end plate for two tier headers Z...0 Z...0 0

2024 © hobbydocbox.com Privacy Policy | Terms of Service | Feedback