APRON TYPICAL CABINET LAYOUTS A B C D E TYPICAL LAY-OUTS FOR 24" TO 30" CABINETS. THESE CABINET SIZES CAN ONLY ACCOMODATE BASE DRAWERS. APRON DRAWERS ARE NOT AVAILABLE F G H I TYPICAL LAY-OUTS FOR 36" TO 42" CABINETS. THESE CABINETS CAN ONLY HAVE BASE DRAWERS UNLESS SINK IS OFFSET. THESE LAYOUTS ARE ALSO USED FOR CABINETS WITH OFFSET SINKS UP TO 54" WIDE. CABINETS TO 36" WIDE WITH NO DRAWERS HAVE A SINGLE PAIR OF DOORS. (SEE LAYOUT A) J K L M N O TYPICAL LAY-OUTS FOR 48" THROUGH 72" VANITY CABINETS WITH CENTERED SINKS. P Q R TYPICAL LAY-OUTS FOR 60" THROUGH 84" VANITY CABINETS WITH DOUBLE SINKS. ABOVE LAY-OUTS ARE SOME OF THE MOST PRACTICAL, BUT YOU MAY DESIGN YOUR OWN CONFIGURATIONS. EXTRA DRAWERS, ADJUSTABLE SHELVES, TILT APRONS, ROLL-OUT SHELVES, ETC. MAY BE ADDED. SEE CUSTOM VANITY WORKSHEETS FOR A LIST OF ACCESSORIES. PAGE V 3
ELITE BATH WORKSHEET BATH FURNITURE WORKSHEET CUSTOMER JOB NAME P.O. # DATE DOOR MATERIAL FINISH FINISHED ENDS: NONE LEFT RIGHT DRAWERS OTHER NOTES: (PRICED PER LINEAL INCH) DOOR STYLES REFER TO A SAMPLE OR LIST FOR THE GROUP NUMBER OF EACH DOOR STYLE PAINTED WHITE MDF & HARDWOOD STAINED OR WHITEWASHED ALDER, OAK, BIRCH, OR KNOTTY PINE CHERRY OR MAPLE MAHOGANY OR WALNUT GROUP I DOORS $30.10 $34.70 $39.15 $48.30 GROUP II DOORS $29.10 $33.45 $37.85 $45.40 GROUP III DOORS $28.20 $32.40 $36.60 $45.05 GROUP IV DOORS $32.55 $37.45 $42.30 $56.20 BASIC CABINET PRICE USE DOOR STYLE, MATERIAL, AND FINISH TO LOCATE THE CORRECT PER LINEAL INCH PRICE FROM ABOVE. MULTIPLY THE LENGTH OF THE CABINET (LINEAL INCHES ) BY THE APPROPRIATE PRICE FROM ABOVE: x $ = SUBTOTAL FOR UNFINISHED CABINETS, DEDUCT 20% FROM ABOVE (SUBTOTAL X.80 = ) FOR A GLAZED FINISH, ADD 20% TO THE SUBTOTAL (SUBTOTAL X 1.20 = ) THIS IS THE SUGGESTED LIST PRICE FOR THE CABINET BOX (21" DEEP & 32" TALL WITHOUT ACCESSORIES). IT INCLUDES FALSE FRONTS, DOORS, & CONCEALED HINGES. CARRY YOUR SUBTOTAL TO THE NEXT PAGE TO COMPLETE THE PRICING. PAGE V 4
ELITE BATH ACCESSORIES BATH FURNITURE MODIFICATIONS QTY PRICE SUBTOTAL FROM PREVIOUS PAGE EXTRA HEIGHT (OVER 32", BUT NOT MORE THAN 36"). X $ 2.50 LI = 1/4" PLYWOOD BACK (COMPLETELY ENCLOSES CABINET). INCLUDED CARTON (IF REQUIRED). X $ 1.50 LI = SPECIAL PAINT COLOR (SEE SPECIFICATION PAGE FOR DETAILS). ADD $180.00 = SPECIAL STAIN COLOR (SEE SPECIFICATION PAGE FOR DETAILS). ADD $290.00 = EXTRA DEPTH (GREATER THAN 21"). X $ 89.00 EA = FILLERS (3" X 48" max.). X $ 29.00 EA = CUTBACKS (90º ONLY). X $ 89.00 EA = ANGLES (OTHER THAN 90 ). X $ 149.00 EA = RADIUS CORNERS (3", 4", OR 6" RADIUS) OR CURVED APRONS X $ 199.00 EA = CABINET ACCESSORIES DRAWERS (DOVETAILED 1/2" SOLID WOOD BOX WITH CONCEALED FULL EXTENSION) X $ 199.00 EA = 5 PIECE DRAWER FRONT (6" MIN. HT. FOR RAISED PANELS). INCLUDED PULL OUTS (DOVETAILED 1/2" SOLID WOOD BOX WITH CONCEALED 3/4 EXTENSION) X $ 199.00 EA = TILT APRONS (FULL LENGTH WHITE PLASTIC TRAY) X $ 69.00 EA = FRAMED ENDS (WITH APPLIED MOULDING). X $ 119.00 EA = ADJUSTABLE SHELVES (WITH PARTITIONS AS NEEDED). X $ 59.00 EA = PARTITIONS ONLY (TO ENCLOSE SINK BASE, ETC.). X $ 39.00 EA = SCALLOPED SKIRT (FRONT AND ANY FRAMED END) X $ 139.00 EA = VANITY BASE DRAWERS (DRAWER UNDER DOORS). X $ 229.00 EA = APPLIANCE DRAWERS (DEEP DWR WITH TWO DWR FRONTS). X $ 229.00 EA = CURVED DOORS (MUST BE A TRUE RADIUS) X $ 649.00 EA = CURVED DRAWER FRONTS (MUST BE A TRUE RADIUS) X $ 449.00 EA = ROLL OUT HAMPERS (27" MAXIMUM WIDTH, FULL EXTENSION SLIDES). X $ 199.00 EA = CARVED LEGS (SELECT FROM SKETCHES BELOW). X $ 69.00 EA = CONSULT THE FACTORY FOR ANY OTHER ACCESSORIES SUGGESTED LIST PRICE = Plain Knee Cabriole (PC8.5) Ball & Claw (BC8.5) Carved Knee Cabriole (CC8.5) Sleigh (SL8.5) Queen Anne (QA8.5) Fancy Bunn (FB6.0) PAGE V 5
ELITE BATH SPECIFICATIONS BATH FURNITURE SPECIFICATIONS THE FOLLOWING SPECIFICATIONS ARE TYPICAL CONSTRUCTION FOR OUR ELITE VANITIES. ALTHOUGH ANY COMPONENT CAN BE CHANGED TO MEET YOUR SPECIFICATIONS, ALL CHANGES MUST BE SPECIFIED IN WRITING ON YOUR PURCHASE ORDER. CHANGING ONE ITEM MAY AFFECT ANOTHER ITEM. CALL THE FACTORY WITH ANY QUESTIONS. HEIGHT: 32" TOE-KICK: DEPENDS ON CHOICE OF CARVED LEGS, ETC. CABINET SIDES: VENEER-CORE PLYWOOD CABINET BOTTOMS: VENEER-CORE PLYWOOD CABINET FACEFRAME: SOLID HARDWOOD CABINET BACK: PLYWOOD, STANDARD PARTITIONS: PLYWOOD, NOT STANDARD (SEE ACCESSORY LIST IF PARTITION IS DESIRED) DOORS & DRAWER FRONTS: SOLD WOOD (STAIN GRADE) OR MDF (PAINT GRADE) DRAWER BOX: 1/2 DOVETAILED SOLID MAPLE (NATURAL FINISH) DRAWER BOTTOM: 1/4" MAPLE PLYWOOD, (FULLY CAPTIONED) DRAWER SLIDES: CONCEALED, FULL EXTENSION, SELF CLOSING WITH SLOW-CLOSE BLUMOTION HINGES : EUROPEAN CONCEALED (SELF CLOSING) WITH SLOW-CLOSE BLUMOTION FINGER PULLS: STANDARD ON DOORS AND DRAWER FRONTS WITH 1/2 OVERLAY, FACEFRAME CONSTRUCTION HARDWARE: WILL BE REQUIRED ON FULL OVERLAY, FRAMELESS CONSTRUCTION FINISH: SATIN CATALYZED VARNISH (GLOSS AVAILABLE AT NO ADDITIONAL COST) WE NORMALLY RECESS UNFINISHED SIDES TO ACCOMMODATE THE IMPERFECTIONS OF HOUSE WALLS. SPECIAL FINISHES THE LEAD TIME FOR CABINETS WITH SPECIAL FINISHES WILL BE AFFECTED BY THE TIME NEEDED TO MAKE SAMPLES AND HAVE THEM APPROVED. GLAZES: WE OFFER TWO STANDARD GLAZED FINISHES. THERE IS A 20% SURCHARGE ON THE CABINET PRICE (BEFORE ACCESSORIES). FOR SPECIAL STAIN COLORS ADD $290.00 ON THE WORKSHEET. WE WILL NEED A PHYSICAL SAMPLE FOR ALL SPECIAL STAINS. WE WILL PROVIDE A COLOR SAMPLE FOR CUSTOMER APPROVAL PRIOR TO STAINING CABINET(S). CABINETS MUST BE MADE FROM THE SAME TYPE OF WOOD AS YOUR SAMPLE. FOR SPECIAL PAINT COLORS (ANY COLOR OTHER THAN WHITE) ADD $180.00 ON THE WORKSHEET. SPECIFY PAINT MANUFACTURER AND COLOR NUMBER. WE WILL LET YOU KNOW IF AN ACTUAL SAMPLE IS REQUIRED. WE WILL HAVE PAINT MIXED TO MATCH AND SEND A SPRAYED SAMPLE FOR CUSTOMER APPROVAL PRIOR TO PAINTING THE CABINET(S). UNFINISHED FOR PAINT GRADE (MDF FRONTS AND HARDWOOD FACE FRAMES) FOR STAIN GRADE (ALL WOOD FRONT) SPECIFY THE TYPE OF WOOD. (OAK, ALDER, BIRCH, PINE, MAPLE, CHERRY, MAHOGANY, WALNUT...) PACKAGING SINGLE FACE CORRUGATED WRAP IS STANDARD PACKAGING. IF A CARTON IS REQUIRED, ADD $1.25 PER LINEAL INCH. PAGE V 6
PREMIUM VANITY SPECI- FICATIONS PREMIUM VANITY SPECIFICATIONS THE FOLLOWING SPECIFICATIONS ARE TYPICAL CONSTRUCTION FOR OUR PREMIUM GRADE VANITIES. ALTHOUGH ANY COMPONENT CAN BE CHANGED TO MEET YOUR SPECIFICATIONS, ALL CHANGES MUST BE SPECIFIED IN WRITING ON YOUR PURCHASE ORDER. CHANGING ONE ITEM MAY AFFECT ANOTHER ITEM. CALL OUR FACTORY WITH ANY QUESTIONS. HEIGHT: 31-1/2" TOE-KICK: 4" TALL X 2" DEEP CABINET SIDES: VENEER-CORE PLYWOOD CABINET BOTTOMS: WHITE MELAMINE CABINET FACEFRAME: SOLID HARDWOOD CABINET BACK: 1/4" MELAMINE, NOT STANDARD (SEE ACCESSORY LIST IF A BACK IS DESIRED) PARTITIONS: 3/4" MELAMINE, NOT STANDARD (SEE ACCESSORY LIST IF PARTITION IS DESIRED) DOORS & DRAWER FRONTS: SOLID WOOD (STAIN GRADE) OR MDF (PAINT GRADE) DRAWER BOX: 1/2" FINISHED PLYWOOD, INTERLOCKED CORNERS, NATURAL FINISH DRAWER BOTTOM: WHITE MELAMINE, 1/4" THICK (FULLY CAPTIONED) DRAWER SLIDES: WHITE EUROPEAN EPOXY COATED DUAL GUIDES (SELF CLOSING) HINGES: EUROPEAN CONCEALED (SELF CLOSING) FINGER PULLS: STANDARD ON DOORS AND DRAWER FRONTS WITH 1/2 OVERLAY, FACEFRAME CONSTRUCTION HARDWARE: WILL BE REQUIRED ON FULL OVERLAY, FRAMELESS CONSTRUCTION FINISH: SATIN CATALYZED VARNISH (GLOSS FINISH AVAILABLE AT NO ADDITIONAL COST) WE TYPICALLY RECESS UNFINISHED SIDES TO ACCOMMODATE THE IMPERFECTIONS OF HOUSE WALLS. SPECIAL FINISHES THE LEAD TIME FOR CABINETS WITH SPECIAL FINISHES WILL BE AFFECTED BY THE TIME NEEDED TO MAKE SAMPLES AND HAVE THEM APPROVED. PLEASE ALLOW FOR THIS ADDITIONAL TIME WHEN PLACING ORDERS. GLAZES: WE OFFER TWO STANDARD GLAZED FINISHES. THERE IS A 20% SURCHARGE ON THE CABINET PRICE (BEFORE ACCESSORIES). FOR SPECIAL STAIN COLORS ADD $290.00 ON THE WORKSHEET. THIS CHARGE COVERS THE COSTS ASSOCIATED WITH COLOR MATCHING SINGLE COLOR STAINS. WE WILL NEED A PHYSICAL SAMPLE FOR ALL SPECIAL STAINS. WE WILL PROVIDE A COLOR SAMPLE FOR CUSTOMER APPROVAL PRIOR TO STAINING CABINET(S). CABINET MUST BE MADE FROM THE SAME TYPE OF WOOD AS YOUR SAMPLE. FOR SPECIAL PAINT COLORS (ANY SOLID COLOR OTHER THAN WHITE) ADD $180.00 ON THE WORKSHEET. SPECIFY PAINT MANUFACTURER AND COLOR NUMBER. ACTUAL SAMPLE MAY BE REQUIRED. IF MANUFACTURER AND NUMBER ARE NOT AVAILABLE, SUBMIT A PHYSICAL SAMPLE OF THE COLOR YOU WANT MATCHED. WE WILL HAVE THE PAINT MIXED AND SEND A SPRAYED SAMPLE FOR CUSTOMER APPROVAL PRIOR TO PAINTING THE CABINET(S). UNFINISHED FOR PAINT GRADE (MDF FRONTS AND HARDWOOD FACE FRAME) FOR STAIN GRADE (ALL WOOD FRONTS AND FACE FRAME) SPECIFY THE TYPE OF WOOD. (OAK, BIRCH, PINE, MAPLE, OR CHERRY.) PACKAGING SINGLE FACE CORRUGATED WRAP IS OUR STANDARD PACKAGING. IF A CARTON IS REQUIRED, ADD $1.25 PER LINEAL INCH. PAGE V 7
PREMIUM VANITY WORKSHEET Premium Vanity Worksheet CUSTOMER JOB NAME P.O. # DATE DOOR MATERIAL FINISH FINISHED ENDS: NONE LEFT RIGHT DRAWERS OTHER NOTES: DOOR STYLE REFER TO A SAMPLE OR LIST FOR THE GROUP NUMBER OF EACH DOOR STYLE (PRICED PER LINEAL INCH) PAINTED WHITE MDF & HARDWOOD BASIC CABINET PRICE STAINED OR WHITEWASHED OAK, ALDER, BIRCH, PINE OR THERMOFOIL CHERRY OR MAPLE GROUP I DOORS $28.10 $32.30 $36.60 GROUP II DOORS $27.25 $31.35 $35.35 GROUP III DOORS $26.35 $30.35 $34.30 GROUP IV DOORS $30.35 $34.90 $39.40 USE DOOR STYLE, MATERIAL, AND FINISH TO LOCATE THE CORRECT PER LINEAL INCH PRICE FROM ABOVE. MULTIPLY THE LENGTH OF THE CABINET (LINEAL INCHES ) BY THE APPROPRIATE PRICE FROM ABOVE: x $ = SUBTOTAL FOR UNFINISHED CABINETS, DEDUCT 20% FROM ABOVE (SUBTOTAL X.80 = ) FOR A GLAZED FINISH, ADD 20% TO THE SUBTOTAL (SUBTOTAL X 1.20 = ) THIS IS THE SUGGESTED LIST PRICE FOR THE CABINET BOX (21" DEEP & 31-1/2" TALL WITHOUT ACCESSORIES). IT INCLUDES FALSE FRONTS, DOORS, & CONCEALED HINGES. CARRY YOUR SUBTOTAL TO THE NEXT PAGE TO COMPLETE THE PRICING. PAGE V 8
PREMIUM VANITY ACCESSORIES PREMIUM VANITY MODIFICATIONS QTY PRICE SUBTOTAL FROM PREVIOUS PAGE EXTRA HEIGHT (OVER 31-1/2", BUT NOT MORE THAN 34-1/2"). X $ 2.00 LI = 1/4" MELAMINE BACK (ENCLOSES CABINET). X $ 1.00 LI = CARTON (IF REQUIRED). X $ 1.50 LI = SPECIAL PAINT COLOR (SEE SPECIFICATION PAGE FOR DETAILS). ADD $180.00 = SPECIAL STAIN COLOR (SEE SPECIFICATION PAGE FOR DETAILS). ADD $290.00 = EXTRA DEPTH (GREATER THAN 21"). X $ 89.00 EA = CUTBACKS (90º ONLY). X $ 89.00 EA = ANGLES (OTHER THAN 90º). X $ 119.00 EA = RADIUS CORNERS OR RADIUS APRONS (3", 4", OR 6"). X $ 199.00 EA = CABINET ACCESSORIES DRAWERS (PLYWOOD BOX WITH DUAL EPOXY SLIDES). X $ 99.00 EA = PULL OUTS (PLYWOOD BOX WITH DUAL EPOXY SLIDES). X $ 99.00 EA = FULL EXTENSION SLIDES (UPGRADE FOR DRAWERS & PULL OUTS). X $ 20.00 PR = 5 PIECE DRAWER FRONT (6" MIN. HT. FOR RAISED PANELS). X $ 19.00 EA = PARTITIONS ONLY (TO ENCLOSE SINK BASE, ETC.). X $ 29.00 EA = TILT APRONS (FULL LENGTH PLASTIC TRAY). X $ 69.00 EA = DRAWER ORGANIZERS (DIVIDED PLASTIC INSERT). X $ 69.00 EA = ADJUSTABLE SHELVES (WITH PARTITIONS AS NEEDED). X $ 49.00 EA = TOWEL RACK (SLIDE OUT, MOUNTED IN SINK COMPARTMENT). X $ 79.00 EA = SLIDING (BI-PASS) PAIR OF WOOD DOORS X $ 99.00 PR = VANITY BASE DRAWER (DRAWER UNDER SINK DOORS). X $ 139.00 EA = APPLIANCE DRAWER (DEEP DWR WITH TWO DWR FRONTS). X $ 139.00 EA = TOE KICK DRAWER (36" MAX WIDTH WITH FULL EXTENSION SLIDES). X $ 199.00 EA = ROLL OUT HAMPER (27" MAX WIDTH WITH FULL EXTENSION SLIDES). X $ 199.00 EA = MINI PANTRY (15" MAX WIDTH WITH FULL EXTENSION SLIDES). X $ 229.00 EA = CONSULT THE FACTORY FOR ANY OTHER ACCESSORIES SUGGESTED LIST PRICE = PAGE V 9