Common Mode Choke Coils(Line Filters) For power line, Closed magnetic circuit core type HF Series Type: Vertical type HF36/HF38 /HF9 For large inductance HF04/HF4/HF430/HF86/HF836/HF3545 Issue date: December 00 Conformity to RoHS Directive: This means that, in conformity with EU Directive 00/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(/0) Common Mode Choke Coils(Line Filters) for AC Power Supply Closed Magnetic Circuit Core Type HF Series Conformity to RoHS Directive TDK common mode choke coils(line filters) are used in a wide range of prevention of electromagnetic interference(emi) and radio frequency interference(rfi) from power supply lines and for prevention of multifunctioning of products such as measuring equipment and system equipment. FEATURES Wide range of selection. High impedance at applicable frequency. High self-resonant frequency. PRODUCT IDENTIFICATION HF V - A Y R - 0 () () (3) (4) (5) (6) (7) () Core shape HF: Square shaped closed magnetic circuit core type () Dimensional code Width Depth (3) External shape code V: Vertical type H: Horizontal type (4) High µ material (5) value Example) 33:3mH (6) value Example) 3R0:3.0A (7) Product management number SELECTION CHART Series Configuration Type HF Vertical type Closed magnetic circuit core types value (A) Handling power=( value) (Current). It is possible to design within the range below this value. [Example] The coil for A can make even the inductance of.5mh or less a product for handling power 0. Handling power L I (mh A ) Weight (g)typ. HF36. to 45 0. to 3 0.5 0.5 800 HF38.5 to 00 0.3 to 3 3 3.5 800 HF9. to 00 0.5 to 3 9 0 440 HF04 0.6 to 33 0.3 to 3 7.6 0 800 HF4.4 to 68 0.4 to.5 5 9.5 540 HF430.4 to 68 0.4 to.5 5 9.5 400 HF86.8 to 35 to 4 35 8 480 HF836.8 to 35 to 4 35 30 400 HF3545 4.7 to 33.5 to 4 75 65 40 Minimum package quantity (pieces/box) Conformity to RoHS Directive: This means that, in conformity with EU Directive 00/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. 00-0 / 005 / e93_hf.fm
(/0) Closed Magnetic Circuit Core Type HF Series FEATURES As closed magnetic circuit core as same as a toroidal core, even at its compact size, it offers large inductance and keeps the high impedance levels required in high frequency ranges. Since it uses a closed magnetic circuit core, the leakage flux is relatively small, allowing designers to improve the mounting density of their circuits. HF36-A(SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE 3max. 6max. 0±0.5 3.5± 0max. ø0.8 4 5.5max. 3±0.5 3 Weight: 0.5g typ. Recommended hole diameter: ø.3 4 3 000 00 0 44Y 83Y 533Y 403Y 63Y 03Y 53Y 03Y 65Y 45Y 4Y 7Y Y 0. 0.0 0. 0 00 (STANDARD LINE UP) (Ω )max. HF36-A44Y0R-0 45 6.8 0. HF36-A83Y0R3-0 8 4 0.3 HF36-A533Y0R4-0 53.4 0.4 HF36-A403Y0R5-0 40.7 0.5 HF36-A63Y0R6-0 6. 0.6 HF36-A03Y0R7-0 0 0.7 HF36-A53Y0R8-0 5 0.7 0.8 HF36-A03YR0-0 0 0.5 HF36-A65YR-0 6.5 0.3. HF36-A45YR5-0 4.5 0..5 HF36-A4YR0-0.4 0. HF36-A7YR5-0.7 0.09.5 HF36-AY3R0-0. 0.06 3 LCR meter(hp46a, HP463B or equivalent)[f=khz] 60±5 C, 0±sec Solder bath method Rated 80 to 80 50Hz/60Hz minute 00min. Temperature ( C) 45max. With line 0 to +0 soldering tenperature 350±5 C, 5sec max. Soldering iron method Pb free solder(sn-3ag-0.5cu) HF36-A 800pieces/box 00-0 / 005 / e93_hf.fm
(3/0) HF38-A(SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE 3max. 8max. 3.5± max. 0±0.5 4 ø0.8 5.5max. 3±0.5 3 Weight: 3.5g typ. Recommended hole diameter: ø.3 4 3 000 00 0 04Y 633Y 503Y 303Y 43Y 3Y 63Y 75Y 3Y 3Y Y 5Y 0. 0.0 0. 0 00 (STANDARD LINE UP) (Ω )max. HF38-A04Y0R3-0 00 3.6 0.3 HF38-A633Y0R4-0 63. 0.4 HF38-A503Y0R5-0 50.8 0.5 HF38-A303Y0R6-0 30. 0.6 HF38-A43Y0R7-0 4 0.7 HF38-A3Y0R8-0 0.75 0.8 HF38-A63YR0-0 6 0.5 HF38-A3YR-0 0.35. HF38-A75YR5-0 7.5 0.6.5 HF38-A3YR0-0 3. 0. HF38-AYR5-0. 0..5 HF38-A5Y3R0-0.5 0.07 3 LCR meter(hp46a, HP463B or equivalent)[f=khz] 60±5 C, 0±sec Solder bath method Rated 80 to 80 50Hz/60Hz minute 00min. Temperature ( C) 45max. With line 0 to +0 soldering tenperature 350±5 C, 5sec max. Soldering iron method Pb free solder(sn-3ag-0.5cu) HF36-A 800pieces/box 00-0 / 005 / e93_hf.fm
(4/0) HF9-A(SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE 9max. max. 000 04Y 3.5± 8max. 0±0.5 ø0.8 4 3 3±0.5 8max. Weight: 0g typ. Recommended hole diameter: ø.3 4 3 503Y 33Y 00 03Y 0 33Y 95Y 50Y 3Y 0. 0.0 0. 0 00 (STANDARD LINE UP) (Ω )max. HF9-A04Y0R5-0 00.7 0.5 HF9-A503Y0R8-0 50 0.95 0.8 HF9-A33YR0-0 3 0.59 HF9-A03YR-0 0 0.38. HF9-A33YR6-0 3 0.5.6 HF9-A95YR0-0 9.5 0.9 HF9-A50YR5-0 5 0..5 HF9-A3Y3R0-0 3. 0.08 3 LCR meter(hp46a, HP463B or equivalent)[f=khz] HF36-A 440pieces/box 60±5 C, 0±sec Solder bath method Rated 80 to 80 50Hz/60Hz minute 00min. Temperature ( C) 45max. With line 0 to +0 soldering tenperature 350±5 C, 5sec max. Soldering iron method Pb free solder(sn-3ag-0.5cu) 00-0 / 005 / e93_hf.fm
(5/0) HF04(SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE.5max. 00 4max. 4.5± 0 3Y 6Y 4Y ø0.8 3±0.5 0±0.5 8max. L L 4 3 Weight: 0g typ. 0. 60Y Recommended hole diameter: ø.3 0.0 0.0 0. 0 00 HF04-333Y0R3-0 33 3. 0.3 HF04-53Y0R4-T0 5 0.4 HF04-83Y0R5-0 8.45 0.5 HF04-3Y0R6-0.3 0.6 HF04-3Y0R8-T0 0.9 0.8 HF04-03Y0R7-T0 0 0.9 0.7 HF04-68Y0R8-0 6.8 0.66 0.8 HF04-6YR0-T0 6. 0.5 HF04-35YR3-T0 3.5 0.7.3 HF04-4YR7-T0.4 0.8.7 HF04-0YR0-T0 0. HF04-60Y3R0-T0 0.6 0.06 3 LCR meter(hp46a, HP463B or equivalent)[f=khz] 60±5 C, 0±sec Solder bath method Rated 80 to 50 50Hz/60Hz minute 00min. Temperature ( C) 50max. With line 0 to +0 soldering tenperature 350±5 C, 5sec max. Soldering iron method Law ("DENAN") Pb free solder(sn-3ag-0.5cu) HF04 800pieces/box 00-0 / 005 / e93_hf.fm
(6/0) Closed Magnetic Circuit Core Type HF Series FEATURES This series employs two outer magnetic path limbs design with windings on the center magnetic path limb of double-square shaped closed magnetic circuit ferrite core to reduce leakage flux. This filter uses the same closed magnetic circuit core as a toroidal core and therefore, even at its compact size, it offers large inductance and suppresses noise up to in high frequency ranges. HF4(DOUBLE-SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE 4 000 683Y 453Y 6max. ø0.8x4 max. 6max. 4± ±0.5 3 4 L L Weight: 9.5g typ. 5±0.5 Recommended hole diameter: ø.3 00 0 333Y 53Y 03Y 45Y 39Y 33Y 4Y 03Y 0. 0.0 0. 0 00 LCR meter(hp46a, HP463B or equivalent)[f=khz] HF4-683Y0R4-T0 68.3 0.4 HF4-453Y0R5-T0 45.65 0.5 HF4-333Y0R6-T0 33. 0.6 HF4-53Y0R8-T0 5 0.88 0.8 HF4-03YR0-T0 0 0.64 HF4-03YR-T0 0 0.38. HF4-45YR5-T0 4.5 0.9.5 HF4-39YR8-T0 3.9 0.5.8 HF4-33YR0-T0 3.3 0. HF4-4YR5-T0.4 0.09.5 HF4 540pieces/box 60±5 C, 0±sec Solder bath method Rated 80 to 80 50Hz/60Hz minute 00min. Temperature ( C) 50max. With line 0 to +0 soldering tenperature 350±5 C, 5sec max. Soldering iron method Pb free solder(sn-3ag-0.5cu) 00-0 / 005 / e93_hf.fm
(7/0) HF430(DOUBLE-SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE 6max. 9max. IMPEDANCE vs. FREQUENCY CHARACTERISTICS 3.5max. ø0.8x4 4± 000 00 683Y 453Y 333Y 53Y 4 3±0.5 0±0.5 4 L L Weight: 9.5g typ. Recommended hole diameter: ø.3 0 45Y 39Y 33Y 4Y 03Y 03Y 0. 0.0 0. 0 00 LCR meter(hp46a, HP463B or equivalent)[f=khz] HF430-683Y0R4-T0 68.3 0.4 HF430-453Y0R5-T0 45.65 0.5 HF430-333Y0R6-T0 33. 0.6 HF430-53Y0R8-T0 5 0.88 0.8 HF430-03YR0-T0 0 0.64 HF430-03YR-T0 0 0.38. HF430-45YR5-T0 4.5 0.9.5 HF430-39YR8-T0 3.9 0.5.8 HF430-33YR0-T0 3.3 0. HF430-4YR5-T0.4 0.09.5 HF430 400pieces/box 60±5 C, 0±sec Solder bath method Rated 80 to 80 50Hz/60Hz minute 00min. Temperature ( C) 50max. With line 0 to +0 soldering tenperature 350±5 C, 5sec max. Soldering iron method Pb free solder(sn-3ag-0.5cu) 00-0 / 005 / e93_hf.fm
(8/0) HF86(DOUBLE-SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE 4 000 ø0.8x4 30.5max. 4± 6max. 30.5max. 0±0.5 4.0±0.5 3 4 L L Weight: 8g typ. Recommended hole diameter: ø.3 00 0 353Y 53Y 03Y 56Y 47Y 33Y 8Y 80Y 0. 0.0 0. 0 00 LCR meter(hp46a, HP463B or equivalent)[f=khz] HF86-353YR0-T0 35 0.78 HF86-53YR-T0 5 0.56. HF86-03YR5-T0 0 0.4.5 HF86-3YR8-T0 0.7.8 HF86-80YR0-T0 8 0.8 HF86-56YR5-T0 5.6 0.3.5 HF86-47YR8-T0 4.7 0..8 HF86-33Y3R0-T0 3.3 0.088 3 HF86-8Y4R0-T0.8 0.05 4 HF86 480pieces/box 60±5 C, 0±sec Solder bath method Rated 80 to 80 50Hz/60Hz minute 00min. Temperature ( C) 50max. With line 0 to +0 soldering tenperature 350±5 C, 5sec max. Soldering iron method Pb free solder(sn-3ag-0.5cu) 00-0 / 005 / e93_hf.fm
(9/0) HF836(DOUBLE-SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE 30.5max. max. 000 36max. ø0.8x4 4± 00 353Y 53Y 03Y 4 3±0.5 0±0.5 4 L L Weight: 30g typ. Recommended hole diameter: ø. to.3 0 80Y 56Y 47Y 33Y 8Y 0. 0.0 0. 0 00 LCR meter(hp46a, HP463B or equivalent)[f=khz] HF836-353YR0-T0 35 0.78 HF836-53YR-T0 5 0.56. HF836-03YR5-T0 0 0.4.5 HF836-3YR8-T0 0.7.8 HF836-80YR0-T0 8 0.8 HF836-56YR5-T0 5.6 0.3.5 HF836-47YR8-T0 4.7 0..8 HF836-33Y3R0-T0 3.3 0.088 3 HF836-8Y4R0-T0.8 0.05 4 HF836 800pieces/box 60±5 C, 0±sec Solder bath method Rated 80 to 80 50Hz/60Hz minute 00min. Temperature ( C) 50max. With line 0 to +0 soldering tenperature 350±5 C, 5sec max. Soldering iron method Pb free solder(sn-3ag-0.5cu) 00-0 / 005 / e93_hf.fm
(0/0) HF3545(DOUBLE-SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE 37max. 6max. 000 4 45max. ø.x6 ±0.5 5±0.5 4± 4 L L Weight: 65g typ. Recommended hole diameter: ø.7 00 0 333Y 83Y 3Y 03Y 8Y 56Y 47Y 0. 0.0 0. 0 00 LCR meter(hp46a, HP463B or equivalent)[f=khz] HF3545-333YR5-T0 33 0.4.5 HF3545-3YR8-T0 0.9.8 HF3545-83YR0-T0 8 0.3 HF3545-53YR-T0 5 0.. HF3545-3YR5-T0 0.7.5 HF3545-03YR7-T0 0 0.3.7 HF3545-8Y3R0-T0 8. 0.05 3 HF3545-56Y3R5-T0 5.6 0.077 3.5 HF3545-47Y4R0-T0 4.7 0.06 4 HF3545 40pieces/box 60±5 C, 0±sec Solder bath method Rated 80 to 80 50Hz/60Hz minute 00min. Temperature ( C) 50max. With line 0 to +0 soldering tenperature 350±5 C, 5sec max. Soldering iron method Pb free solder(sn-3ag-0.5cu) 00-0 / 005 / e93_hf.fm