Reflective Coaxial SP2T Switch DC - 6 Electrical Specifications, TA = +25 C, Vcc +5V, TTL= 0 / +5V Description Features Wide Band Operation DC-6 TTL compatible driver included Fast Switching Speed Low Insertion Loss and High Isolation Customization available upon request Typical Applications Wireless Infrastructure Test and Measurement Military and Aerospace PN: SP2T Reflective Switch High Power Cold Switching Parameters Min Typ Max Min Typ Max nits Frequency Range DC-3 3-6 Insertion Loss 0.8 1.0 1.1 1.3 Insertion Loss Temperature Coefficient 0.003 0.003 / C Isolation 33 37 25 28 Input VSWR 1.2 1.3 1.3 1.5 : 1 Output VSWR 1.2 1.3 1.3 1.5 : 1 RF Input power (CW) 46 46 m DC Power Dissipation 0.7 0.7 W 0.1 Compression Point( P0.1 ) 46 46 m IIP3 55 55 m Switching Speed 100 100 ns Weight 1.06 Ounces Impedance 50 Ω Bias Current ( +5V ) 100 ma Input / Output Connectors Finish Material Sealing SMA-Female Gold Plated Aluminum Hermetically Sealed (Optional) Reflective Coaxial Single Pole Double Throw Switch DC - 6
Absolute Maximum Ratings Biasing +5V±10% Ordering Information Part No. ECCN Description TTL Control Voltage 0~0.8V/2.8~5V Note: TTL pins cannot be connected to the negative voltage otherwise the internal driver will be damaged. Environmental Specifications and Test Standards EAR99 Parameter Standard Description Operational Temperature MIL-STD-39016-45 ~+85 (Case Temperature) Storage Temperature -50 ~+125 Thermal Shock Random Vibration Electrical & Temperature Burn In Shock Altitude Hermetically Sealed (Optional) MIL-STD-883 SP2T DC-6 GaN Switch 1 Hour@ -45 1 Hour @ +85 (5 Cycles) Acceleration Spectral Density 6 (m/s) Total 92.6 RMS Temperature +85 for 72 Hours 1. Weight >20g, 50g half sine wave for 11ms, Speed variation 3.44m/s 2. Weight <=20g, 100g Half sine wave for 6ms, Speed variation 3.75m/s 3. Total 18 times (6 directions, 3 repetitions per direction). Standard: 30,000 Ft (Epoxy Sealed Controlled Environment) Optional: Hermetically Sealed (60,000 ft. 1.0 PSI min) MIL-STD-883 (For Hermetically Sealed nits) Reflective Coaxial Single Pole Double Throw Switch DC - 6
Typical Performance Plots Insertion Loss @+25 Input VSWR @+25 InsertionLos... S12 Mag 1.3 / Ref -1.3 Cal 2 InputVSWR S11 SWR 500 m/ Ref 1 Cal 1 S12 6.5-0.6261-0.6934-0.9268 S11 5500 1.0817 1.2078 1.2614 5.2 5000 3.9 4500 2.6 1.3 0.0-1.3-2.6-3.9 Ch1 Base Freq Start 10 Base Pwr 0 m Output VSWR @+25 OutputVSWR S22 SWR 500 m/ Ref 1 Cal S22 5500 5000 4500 4000 3500 3000 2500 2000 1500 1000 Ch1 Base Freq Start 10 Base Pwr 0 m Insertion Loss @-45 Output VSWR @-45 Stop 6 4 1.0287 1.2248 1.1501 Stop 6 4000 3500 3000 2500 2000 1500 1000 Ch1 Base Freq Start 10 Base Pwr 0 m Isolation @+25 Isolation S21 Mag 10 / Ref -33 Cal S21 27 17 7-3 -13-23 -33-43 -53 Ch1 Base Freq Start 10 Base Pwr 0 m Input VSWR @-45 Isolation @-45 Stop 6 3-55.033-34.939-26.734 Stop 6 Reflective Coaxial Single Pole Double Throw Switch DC - 6
Insertion Loss @+85 Input VSWR @+85 Output VSWR @+85 Switching Speed Isolation @+85 Switching Speed Reflective Coaxial Single Pole Double Throw Switch DC - 6
7 [0.28] 40 [1.57] 36.8 [1.45] 14.5 [0.57] 6.5 [0.26] 6.5 [0.26] 9.5 [0.37] RF-LAMBDA Outline Drawing: All Dimensions in mm [inches] [X206] 5 [0.20] J2 2.5 [0.10] RF-Lambda RFS P2TRDC06G F:DC-6 SN:XXXXXXXXXX GND 1.02 [0.04] 34 [1.34] 30.8 [1.21] JO +5V TTL 9 [0.35] J1 1.02 [0.04] 4-2.2[0.09] THR Truth Table Control Input TTL Signal Path State 1 J0-J1 0 J0-J2 Control Pin Customization available upon request Reflective Coaxial Single Pole Double Throw Switch DC - 6 Important Notice The information contained herein is believed to be reliable. RF-Lambda makes no warranties regarding the information contained herein. RF-Lambda assumes no responsibility or liability whatsoever for any of the information contained herein. RF-Lambda assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for RF-Lambda products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. RF-Lambda products are not warranted or authorized for use as critical components in medical, life-saving, or life sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. RF-LAMBDA SA www.rflambda.com Sales: sales@rflambda.com Technical : support@rflambda.com