andle raft Gedeo andles Gedeo candles allow you to create your own warm atmospere on those big occasions where candles are just perfect to set the scene. For a spectacular result, mould in traditional or original shapes, plain or in several coloured layers, with fruity, woody or a natural fragrance.. Gedeo andle Wax mixture of paraffin and stearin, this candle wax is ready to use in the form of a very fine powder, it melts quickly without lumps. 6020316221 500g 2 Modelling quipment. Gedeo andle Moulds 2 durable moulds for multiple casts. asy demoulding. 6020316227 Square 5.5 x 10cm* 1 6020316228 one 6 x 10cm* 1 (*) Only While Stocks Last! Pro Tips: The andles. Gedeo andle olourants Rich in pigment, just a few flakes are sufficient to obtain a deep colour. 6 mixable colours - blue, red, yellow, mauve, green and orange. 6020316224 3. Gedeo andle Perfume Woody, flowery and vanilla fragrances to perfume candles. The perfume is mixed in the melted wax before pouring into the mould. oncentrated extracts: just a few drops are sufficient. 6020316225 Pkt 3 1 Highly original candles can be created by using glass containers. To demould, break the glass in a thick tea towel, giving a sharp knock on the bottom or on the side. arefully remove the broken glass. To create candles in several coloured layers, pour the first colour and wait until a skin has formed (it must not stick to the fingers) before pouring on the next colour. o not wait until each colour is completely set; since the wax shrinks as it sets, the stripes would not be clear. The colour tends to lighten on drying, do not hesitate to darken the colours slightly. The more colourant you add to the wax, the faster it will set.. Gedeo andle Wicks otton wick suitable for candles from 65 to 85mm diameter. No 4 x 5m. 6020316222 4 121 4 runsdon Street, ayswater, VI. 3153 Tel: (03) 9720 3322 Fax: (03) 9720 2280 ffective 1st ugust 2017. ll prices exclude GST. ll prices may be subject to change without notice.
Modelling quipment Modelling ompounds alsa Foam from MO alsa-foam is different from other plastic foams because it carves easily with traditional and non-traditional hand tools and can be decorated with any paint just like balsa wood. alsa-foam has a density of 5lb. per cubic foot and is great for students because sharp tools are not required. alsa- Foam II has a density of 10 lb. per cubic foot and is also easy to carve but holds intricate detail. alsa-foam has no memory so it holds any impression.. Single lock - Hard 3 x 4 1 2 x 5. Single lock - Soft 3 x 4 1 2 x 5. 48 lassroom Pack - Soft Pkt 3 x 3 x 1/2 x 48 Pieces 48 lassroom Pack - Hard Pkt 3 x 3 x 1/2 x 48 Pieces 6010723009 1 6010723016 1 6010723001 1 6010723022 1 Retail Pack - Hard 6 x 9 x 1/2 Pkt 2. Retail Pack - Soft 6 x 9 x 1/2 Pkt 2. 24 lassroom Pack - Soft Pkt 2 x 2 x 2 x 24 Pieces. 24 lassroom Pack - Hard Pkt 2 x 2 x 2 x 24 Pieces 6010723006 1 6010723013 1 6010723020 1 6010723021 1 alsa Foam Image Transfer reations 122 1 Use a modelling tool to carve your design in alsa-foam. 2 Use a colour to apply a printing colour to carving. 3 Press alsa-foam firmly into clay surface. 4 Image transfer is that easy! with alsa-foam. For Lesson Plans and Techniques visit: www.macolessonplans.com 4 runsdon Street, ayswater, VI. 3153 Tel: (03) 9720 3322 Fax: (03) 9720 2280 ffective 1st ugust 2017. ll prices exclude GST. ll prices may be subject to change without notice.
Modelling ompounds. Multi oloured Modelling lay Red, Yellow, lue and Green layered in 500g block with a plastic seal. 6013010020 500g 6. Traditional Modelling lays Similar to plasticine. Re-usable, non-toxic and will not dry hard. 60130100-- 500g 6 olours: 10 Sky lue 01 lack 16 Flesh 08 Red 06 Grey 07 Terracotta 02 White 09 Yellow 11 Lt Green Modelling quipment. ir rying lay Ready to use. No baking is required, object will set hard when left to dry in open air. rying time varies according to thickness and climatic conditions. Objects can be painted and varnished once dry. 6013010500 White 500g 6 6013010100 White 1kg 4 6013011500 Terracotta 500g 6 6013011100 Terracotta 1kg 4 Modelling Moulds. Gedeo Moulds No home, project or fashion statement is complete without small personal objects or ornaments here and there, but who but a sculptor could make them? Now you can - it s easy with Gedeo moulds. Pebeo has designed a range of unbreakable self-unmoulding moulds for objects than can then be decorated according to your tastes. These 100% platinum silicone multi-cavity moulds include a drainage channel and are suitable for all materials (eg. plaster, wax, resin or chocolate). Frames 20 x 30cm 6020316120 Jewellery 20 x 30cm 6020316121 lphabet 20 x 30cm 6020316126 nimals 13 x 18cm 6020316129 uttons 13 x 18cm 6020316130 123 4 runsdon Street, ayswater, VI. 3153 Tel: (03) 9720 3322 Fax: (03) 9720 2280 ffective 1st ugust 2017. ll prices exclude GST. ll prices may be subject to change without notice.
Modelling quipment Modelling ompounds Gedeo Modelling Materials Gedeo modelling materials are extremely easy to use, and with numerous possibilities for the creation of models, offer complete freedom of expression for interior decoration. With Gedeo you can easily mould and reproduce all types of objects. hoose your moulding product according to the shape and consistency of the object, the casting material and the number of casts required. The casting products offer a wide range of effects such as plaster, stone and glass paste. hoose the material according to its appearance and hardness.. Gedeo Latex oncentrated formula based on a natural rubber. It can be used to mould simple and complicated shapes, small and large items and masks. 6020316331 250ml 2 6020316335 1000ml 1. Modelling Paste Wax-based paste. Infinitely reusable. It can also be used to take the imprint of an object to make a plaster cast. 6020316304 500g 2. Waterproofing gent crylic resin-based product, ideal for waterproofing containers made from non-firing clay. Its yellow colour makes it easy to see non coated areas. The colour disappears within a few days in full light. Transparent once dry. ries in 10 hours. 6020316308 75ml 2. Moulding lginate Natural seaweed-based powder, for moulding soft or delicate objects, the human body. Makes 1.6-1.75 litres. 6020316310 500g 2. Siligum Very fast setting, two-component silicone moulding paste. asy dosing (1/1). To mould small objects and flat decorations. For mateur and professional use. 6020316309 100g 3 6020316329 300g 1 124 4 runsdon Street, ayswater, VI. 3153 Tel: (03) 9720 3322 Fax: (03) 9720 2280 ffective 1st ugust 2017. ll prices exclude GST. ll prices may be subject to change without notice.
Modelling ompounds. Plaster Strips They can be used to cover all types of objects, produce masks by applying directly on the skin, make supporting shells for the Siligum, alginate or latex moulds. 6020316333 8cm x 3mt 4 6020316312 Pkt of 4 2. Mod-Wrap very versatile craft product that can be bandaged around most forms. fine gauze material that is in a roll form impregnated with quick drying plaster for creating casts or moulding shapes. Non-Toxic, microwaveable, quick and fun. 6093010008 10cm x 460cm 4 Modelling quipment. Resin Plaster Top quality alpha plaster. ue to its exceptional hardness after drying, it is similar to polyester resins. Specially recommended for objects requiring fineness, strength and whiteness. 6020316313 1kg 2. Precision Plaster or Hard Plaster lpha plaster for artistic casts. Offers accuracy and strength of exceptional quality. Its coarser grain and porosity make it easy to paint. 6020316314 1kg 2. Glueing Plaster or Restoration Plaster Technical plaster. Thick and very sticky. oesn t run and adheres to most surfaces. Used together with Siligum, it s ideal when restoring frames and mouldings. 6020316316 750g 2 F. Light Plaster Low density plaster recommended casting hanging decorations 6020316330 1kg 4 F H H. emoulding Vaseline Simplifies the demoulding of rystal Resin and protects the moulds. It can be used to protect the eyelashes and eyebrows. 6020316320 75ml 4 125 4 runsdon Street, ayswater, VI. 3153 Tel: (03) 9720 3322 Fax: (03) 9720 2280 ffective 1st ugust 2017. ll prices exclude GST. ll prices may be subject to change without notice.
Modelling quipment Modelling ompounds. Gedeo rystal Resin The Pébéo Gédéo rystal Resin has been acclaimed by professional decorators and crafters for over ten years. Transparent, robust and easy to work thanks to its simple dosing! Its two component epoxy system (resin and hardener), allows a surprising glass paste effect. Gédéo rystal Resin is ideal for the production of castings, inclusions, bottoms of platters, jewellery creation, coatings, decorating surfaces, laminates, and can also be used as a protective varnish. Ideal for glass, ceramic, metal, silicone, painted wood and plastic. Hardens in 12 to 24 hours. leans with soap and water. 6020316150 150ml 3 6020316172 300ml 2 6020316173 750ml 1 pplication: 1. Pour 1 dose of rystal Hardener followed by 2 doses of rystal Resin into a clean dry container. 2. Mix thoroughly (incomplete mixing does not guarantee hardening, mixing too strongly creates the appearance of bubbles). Transfer the mixture into a second container and mix again to ensure homogeneity of the resin and optimum hardening. 3. Pour onto the surface of your choice. 4. Let dry 24 hours away from dust. The hardening is progressive and varies with the room temperature. Moulds with rystal Resin ottom of tray with rystal Resin. Gedeo Pearl Resin dd a pearlescent touch to your creations with the Gédéo Pearl Resin! 3 pearlescent and luminous colours to create in volume: White, Gold and Vermeil. multitude of possibilities: frames, friezes, tableware, mouldings, jewellery, barrettes, marbling techniques. Hardens in 12 to 24 hours. leans with soap and water. 6020316160 White 2 6020316161 Gold 2 6020316162 Vermeil 2 pplication: 1. Slowly mix pearl resin until fully dispersed. 2. Pour 1 dose Pearl Hardener then 2 doses Pearl Resin into a clean dry container. 3. Mix thoroughly (incomplete mixing does not guarantee hardening, mixing too strongly Frame creation with Pearl Resin and Gloss Varnish creates the appearance of bubbles). Transfer the mixture into a second container and mix again to ensure homogeneity of the resin and optimum hardening. 4. Pour into the surface of your choice. 5. llow to dry 24 hrs. The hardening is progressive and varies with room temperature. 126. Gedeo Resin iscovery Set Includes 3 x 20ml colours and 150ml rystal resin. Ready to use transparent colours that imitate glass paste. an be mixed together. 6020316156 1 4 runsdon Street, ayswater, VI. 3153 Tel: (03) 9720 3322 Fax: (03) 9720 2280 ffective 1st ugust 2017. ll prices exclude GST. ll prices may be subject to change without notice.
Modelling ompounds. Gedeo olour Resin Mixable with each other, and with the rystal Resin, the Gédéo olour Resins offer infinite shade possibilities! 5 ready to use transparent and homogenous colours ideal for jewellery creation, colour inclusions, pendants, pattern reproductions, decoration. Hardens in 12 to 24 hours. leans with soap and water. 150ml. 6020316155 Topaz 2 6020316154 mber 2 6020316152 Ruby 2 6020316151 Lapiz lue 2 6020316153 Jade 2 Modelling quipment Useful Tips: 1. To verify the required quantity of each component and not waste the product, fill the mould to be used with water and pour into a measuring cup: a third of the volume for the hardener and two thirds for the resin. ry the mould and the measuring cup before pouring the colour resin. 2. The mixture is homogeneous when it becomes transparent. 3. To allow the shaping of your creation (eg. glue your moulding around a bottle) you can unmould after 12 hours of drying. Hardens completely after 24 hours. reation of small decorative objects with olour Resin. Gedeo Gloss Varnish Gédéo s Gloss + solvent phase Varnish allows rendering a glossy finish to all Gédéo Resin creations. It offers the possibility to play with opacity/transparency contrasts on all your decorations. pplication with a polyamide fibre flat brush ensures the best results. ries in 2 hours. 6020316171 110ml 1. Gedeo Point Of Sale Please ask us about the range of Gédéo point of sale items.. Gedeo Glazing Resin With its enamelled effect enamel, Gédéo Glaze Resin adds relief and shine to flat surfaces. The rounded edges controlled by the product are the great advantage of this PÉÉO innovation. Ideal for scrapbooking, photos, postcards, souvenirs, box covers, badges, canvasses, furniture decoration. 6020316170 150ml 1 Gedeo Moulds See page 122 for the great range of Gédéo moulds available. Glazed postcard with Glazing Resin Perspex Shelf Talker 9990310080 127 4 runsdon Street, ayswater, VI. 3153 Tel: (03) 9720 3322 Fax: (03) 9720 2280 ffective 1st ugust 2017. ll prices exclude GST. ll prices may be subject to change without notice.
Modelling quipment Modelling Tools. oxwood lay Tools 20 cm wooden tools for clay or plasticine modelling. Set of 12 assorted. (Set only - not sold separately). 6030260012 6. olourshaper Set Set of 5 assorted shapes. Size 10 (large). 1550341265 1 20cm LONG. Gedeo Modelling Tools Includes trimming tool, modelling tool, rib and cutting wire. 6020316305 4. Wire nded Tool Set 5 x 8 double-ended modelling tools. Set only - not sold separately 6030040040 4. lay Gun No.470 tool used for extruding fine lengths of clay in 11 different designs. 6030260065 2 8 LONG 128 4 runsdon Street, ayswater, VI. 3153 Tel: (03) 9720 3322 Fax: (03) 9720 2280 ffective 1st ugust 2017. ll prices exclude GST. ll prices may be subject to change without notice.
Modelling Tools 6 LONG 6 LONG Modelling quipment. 6 Ribbon utting Tool Set -11 7 x 6 double-ended ribbon cutting tools. Not sold separately. 6030260011 4. Wire nded Tool Set -04 6 x 6 double-ended modelling tools. Set only - not sold separately 6030260046 4. Handle Maker -5 Make handles for cups. up size 101 x 19mm. 6030265050 12. Handle Maker -51 Make handles for mugs. Mug size 116 x 25mm. 6030265051 12 10 LONG. 10 Ribbon utting Tool Set -07 3 x 10 double-ended ribbon cutting tools. Not sold separately H. 7 Piece lean Up Tool Kit 59 In zip bag. Set only - not sold separately. 6030260007 6 6030265900 4 H F G F. Hole utters Ideal for any purpose that requires a round hole to be cut or made. 6030265012 21mm 6 G. Loop Tools Heavy uty 61 Pottery cutting tools 130mm. 6030266110 #10 6 (*) Only While Stocks Last! 129 4 runsdon Street, ayswater, VI. 3153 Tel: (03) 9720 3322 Fax: (03) 9720 2280 ffective 1st ugust 2017. ll prices exclude GST. ll prices may be subject to change without notice.
Modelling quipment Modelling Tools. Sculptors Thumb SS-5" 6030260275 12. Rubber Kidney RP2MS Soft blue. 6030260002 12. Small lue Kidney RP1SS 6030260001 12. Rubber lay Scraper P-18-2 6030260182 6 F G. Rubber Kidney RP2MH Hard black. 6030260003 12 F. Steel Kidney P26-2 118cm x 51cm. 6030260262 12 G. Wire Toggle No.-50-52 450mm wire with toggle/handles. 6030265052 12 H. Wooden Potters Ribs -26 6030262601 No.1 12 6030262602 No.2 12 6030262603 No.3 12 6030262604 No.4 12 6030262606 No.6 12 I H No.3 No.1 No.2 No.6 130 No.4 I. Pottery Tool Kit S260 8 assorted tools in one kit. Set only - not sold separately. 6030260010 6 4 runsdon Street, ayswater, VI. 3153 Tel: (03) 9720 3322 Fax: (03) 9720 2280 ffective 1st ugust 2017. ll prices exclude GST. ll prices may be subject to change without notice.