CPC117N Single-Pole, Normally Open 4-Lead SOP OptoMOS Relay Parameter Rating Units Blocking Voltage 6 V P Load Current 1 ma rms / ma DC On-Resistance (max) 16 LED Current to operate 1 ma Features Designed for Use in Security Systems Complying with EN13-4 Only 1mA of LED Current Required to Operate 1V rms Input/Output Isolation Small 4-Lead SOP Package TTL/CMOS Compatible Input No Moving Parts High Reliability Arc-Free With No Snubbing Circuits No EMI/RFI Generation Immune to Radiated EM Fields SMD Pick & Place, Wave Solderable Tape & Reel Version Available Description The CPC117N is a miniature single pole, normally open (1-Form-A) solid state relay in a 4-lead SOP package that employs optically coupled MOSFET technology to provide 1V rms of input/output isolation. The super-efficient MOSFET switches and photovoltaic die use IXYS Integrated Circuits Division s patented OptoMOS architecture while the optically coupled output is controlled by a highly efficient GaAIAs infrared LED. IXYS Integrated Circuits Division s state of the art double-molded vertical construction packaging enables CPC117N to be one of the world s smallest relays. It offers board space savings of at least 2% over the competitor s larger 4-lead SOP relay. Approvals UL Recognized Component: File E7627 CSA Certified Component: Certificate 117739 EN/IEC 69-1 Certified Component: TUV Certificate B 9 7 4941 4 Applications Security Passive Infrared Detectors (PIR) Data Signalling Sensor Circuitry Instrumentation Multiplexers Data Acquisition Electronic Switching I/O Subsystems Meters (Watt-Hour, Water, Gas) Medical Equipment Patient/Equipment Isolation Aerospace Industrial Controls Ordering Information Part # Description CPC117N 4-Lead SOP (1/tube) CPC117NTR 4-Lead SOP (2/reel) Pin Configuration 1 + Control 4 Load 2 Control 3 Load Switching Characteristics of Normally Open Devices Form-A 9% I LOAD 1% t on t off Pb e3 DS-CPC117N-R7 www.ixysic.com 1
CPC117N Absolute Maximum Ratings @ 2ºC Parameter Ratings Units Blocking Voltage 6 V P Reverse Input Voltage V Input Control Current ma Peak (1ms) 1 A Input Power Dissipation 7 mw Total Power Dissipation 1 4 mw Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Isolation Voltage, Input to Output 1 V rms Operational Temperature -4 to +8 ºC Storage Temperature -4 to +12 ºC 1 Derate linearly 3.33 mw / ºC Electrical Characteristics @ 2ºC Parameter Conditions Symbol Min Typ Max Units Output Characteristics Load Current Continuous 1 =2mA I L - - 1 ma rms / ma DC Peak t=1ms I LPK - - ±3 ma P On-Resistance 2 I L =1mA R ON - - 16 Off-State Leakage Current V L =6V P I LEAK - - 1 A Switching Speeds Turn-On t =ma, V L =1V on - - 1 ms Turn-Off t off - - 1 ms Output Capacitance V L =V, f=1mhz C OUT - 2 - pf Input Characteristics Input Control Current to Activate 3 I L =1mA -.4 1 ma Input Control Current to Deactivate -.3 - - ma Input Voltage Drop =ma V F.9 1.2 1.4 V Reverse Input Current V R =V I R - - 1 A Common Characteristics Capacitance, Input to Output - C I/O - 1 - pf 1 Load current derates linearly from 1mA @ 2ºC to 8mA @ 8ºC. 2 Measurement taken within 1 second of on-time. 3 For applications requiring high temperature operation (greater than 6ºC) a LED drive current of 3mA is recommended. R7 2 www.ixysic.com
CPC117N PERFORMANCE DATA* 2 Typical Turn-On Time (N=, =ma, I L =1mA, T A 2 Typical Turn-Off Time (N=, =ma, I L =1mA, T A 3 Typical On-Resistance Distribution (N=, I L =1mA, T A 2 1 1 2 1 1 3 2 2 1 1 1. 1.1 1.2 1.3 1.4 1. 1.6 Turn-On (ms).26.28.3.32.34.36.38 Turn-Off (ms) 6.8 6.9 7. 7.1 7.2 7.3 7.4 On-Resistance ( ) 2 Typical for Switch Operation (N=, I L =1mA, T A 2 Typical for Switch Dropout (N=, I L =1mA, T A 3 Typical Blocking Voltage Distribution (N=, T A 2 1 1 2 1 1 3 2 2 1 1.3.3.4.4...6 LED Current (ma).3.3.4.4...6 LED Current (ma) 8 82 84 86 88 9 92 Blocking Voltage (V P ) 3 3 2 2 1 1 Typical LED Forward Voltage Drop (N=, =ma, T A 1.17 1.19 1.21 1.23 1.2 LED Forward Voltage Drop (V) Turn-On (ms) Typical Turn-On vs. LED Forward Current =1mA) 3. 2.7 2.4 2.1 1.8 1. 1.2.9.6.3 1 1 2 2 3 3 4 4 LED Forward Current (ma) Turn-Off (ms).7.6..4.3.2.1 Typical Turn-Off vs. LED Forward Current =1mA) 1 1 2 2 3 3 4 4 LED Forward Current (ma) LED Forward Voltage Drop (V) 1.8 1.6 1.4 1.2 1. Typical LED Forward Voltage Drop =ma =1mA =ma.8-4 -2 2 4 6 8 1 12 LED Current (ma) 3. 2. 2. 1. 1.. -4 Typical for Switch Operation =8mA) -2 2 4 6 8 1 Turn-Off (ms) 1..9.8.7.6..4.3.2.1-4 Typical Turn-Off =ma) =ma =2mA -2 2 4 6 8 1 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R7 www.ixysic.com 3
CPC117N PERFORMANCE DATA* On-Resistance ( ) 14 12 1 8 6 4 Typical On-Resistance =Max Rated @ Temperature) 2-4 Steady State =2mA Instantaneous =ma =ma -2 2 4 6 8 1 Load Current (ma) 1 1 - -1 Typical Load Current vs. Load Voltage ( =ma, T A -1-1. -1. -.. 1. 1. Load Voltage (V) Load Current (ma) Typical Load Current 18 16 14 12 1 8 6 4 2-4 -2 2 4 6 8 1 12 =ma =2mA Blocking Voltage (V P ) 91 89 87 8 83 81 79 77-4 Typical Blocking Voltage -2 2 4 6 8 1 Leakage ( A).16.14.12.1.8.6.4.2-4 Typical Leakage Measured Across Pins 3&4 (V L =6V) -2 2 4 6 8 1 Load Current (A) Energy Rating Curve 1..9.8.7.6..4.3.2.1 1 s 1 s 1ms 1ms 1ms 1s 1s 1s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R7 4 www.ixysic.com
CPC117N Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-2, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-33. Device Moisture Sensitivity Level (MSL) Rating CPC117N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-62. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-2 must be observed. Device CPC117N Maximum Temperature x Time 26ºC for 3 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb e3 R7 www.ixysic.com
CPC117N CPC117N 4.89 ±.23 (.161 ±.8) MECHANICAL DIMENSIONS.2 ±.2 (.8 ±.1) Recommended PCB Land Pattern.6 (.217) 3.81 ±.76 (.1 ±.3) Pin 1 2.4 Typ (.1 Typ) 6.96 ±.12 (.24 ±.4) 1.2 ±.2 (.4 ±.1).432 ±.127 (.17 ±.) 1.3 (.12).6 (.22) 2.184 Max (.86 Max) Lead to package standoff:.637 ±.383 (.2 ±.1) 2.4 (.1).762 ±.12 (.3 ±.4).381 TYP. (.1 TYP.) Dimensions mm (inches) CPC117NTR Tape & Reel 33.2 Dia (13. Dia) Top Cover Tape Thickness.12 Max (.4 Max) B =4.7 (.18) W=12. (.472) K =2.7 (.16) K 1 =2.3 (.91) A =6. (.26) User Direction of Feed P=8. (.31) Embossed Carrier Dimensions mm (inches) Embossment NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC117N-R7 Copyright 212, IXYS Integrated Circuits Division OptoMOS is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/13/212