Unique! At last a system that joins everything. More versatile, more stable, faster: the new DOMINO jointing system. No Compromises!
The DOMINO jointing system. Every system has its advantages... Round dowels. The traditional solution for frames and racks. Biscuit dowels. A standard feature on boards for decades. Round dowels are among some of the most important jointing elements used in furniture assembly. However, because round dowels do not allow for misalignment, exact positioning is usually required with bench-mounted or semistationary machines. Biscuit dowels are positioned on the scribe line, usually using handheld machines. Because biscuit dowels are shorter than the routed grooves, a slight offset does not pose a problem when the dowel is inserted as the joint can be moved. However, this does require additional alignment when gluing.
... but one system has them all. The DOMINO jointing system. An essential component in wooden jointing. More versatile: suitable both for panel joins and jointing frames and racks. More stable: the special shape and large surface area for gluing on the DOMINO dowel ensure maximum stability. Quicker: the first dowel hole is aligned with extreme ease and routed accurately using stop pins. It secures the joined workpieces immediately, accurately and flush with the edge. The DOMINO system also tolerates smaller inaccuracies in adjacent dowel holes, allowing you to work even more quickly and easily.
The DOMINO jointing system. At last a system that joins everyt As solid as a mortise and tenon joint, but more variable a the DOMINO is a new unique jointing system. The system consists of the DOMINO dowel jointer, recently developed by Festool, and a loose spigot in the shape of the oval DOMINO dowel. A perfect fit. Thanks to an accurately-routed long hole and special DOMINO groove geometry. The DOMINO jointing system is suitable both for panel joins and frame and rack joints. The simple placement of the DOMINO dowel allows for economical production of individual parts and small batches, for chairs, tables and shelving, etc. Allowing you to work both quickly and precisely. 00% rotation-proof. Right from the first DOMINO dowel. P E F C / 0 4-3 - 0 6 2 2 DOMINO dowels bear the Pan European Forest Council (PEFC) quality seal for wood products originating from sustainable, well-maintained, responsible forest cultivation. Maximum stability. Thanks to the shape of the DOMINO dowel, designed with expanding glue slots and side grooves. These are only a few example applications where the DOMINO jointing system can be used to make your work more versatile, more stable and quicker.
hing. nd quicker: DOMINO dowel. Panel joins. Quick, solid joints, no alignment required when gluing. Frame joints. Insertion of several DOMINO dowels provides maximum stability for heavily loaded frame components. Rack joints. Suitable for workpieces with dimensions greater than 5 x 22 mm.
The DOMINO jointing system. More versatile, more stable, fast As unique as the whole system: the DOMINO dowel jointer The DOMINO jointing system combines exceptional versatility with simple handling and maximum precision. The DOMINO dowel jointer demonstrates this in every detail. 2 The patented routing principle, excellent ergonomics and a wide range of adjustment options make it extremely easy for you to manufacture solid joints, even in extremely complex applications. Correct position. Precise positioning and accurate routing with the viewing window. Mitre routing. Catch positions at 0, 22.5, 45, 67.5 and 90 as well as infinitely variable routing angles from 0 to 90. Patented routing principle. Route long holes in an instant thanks to the simultaneous turning and oscillating movement. No kickbacks. Refined technology. High-quality, robust inner mechanism for consistently accurate routing results. 6
er. DF 500. Hole width selection. Easy to adjust while the dowel jointer is operating: fixed long hole or with clearance 2. Efficient dust extraction. Extracts up to 95% of chips generated. ) Routing height adjuster with scale. Simple, precise routing height adjustment. Depth stop. Quick, precise adjustment for five different routing depths. Retractable stop pins. For quick and precise positioning of the first DOMINO dowel on both workpieces. Movable stepped stop. Height adjuster for central hole in material thicknesses: 6, 20, 22, 25, 28, 40 mm. ) Source: Festool testing laboratory July 2005. 7
The DOMINO jointing system. At last a system that joins everyt More versatile, more stable, faster. An overview of advantages of the DOMINO jointing Pendulum principle Precision B A No other machine routes like the DOMINO dowel jointer. The routing movement of the DOMINO dowel jointer is unique among hand-held machines. A special feature of the jointer is the simultaneous turning and oscillating movement of the routing tool a patented principle that up to now has only been available on expensive stationary machines. This feature guarantees kickback-free, safe work and accurately routed long holes. The width of the long holes can be changed simply by adjusting the dowel jointer while in operation. Quick, accurate work. For example, with panel joins: 2 3 4 Route fixing holes accurately using the stop pins A on the DOMINO dowel jointer. Route all adjacent long holes with clearance on the scribe line via the viewing window B. The wider routed hole compensates for any inaccuracies that may occur when the dowel jointer is positioned on the workpiece. Insert the DOMINO dowel. Assemble the workpieces for gluing. No further alignment is required. When gluing the workpiece, the DOMINO dowel inserted in the fixing hole aligns the workpiece with the edge. The joint fits perfectly it s as simple as that. Switch position Hole width Fixing hole 2 3 4 Long hole with clearance Both variable and precise: quick readjustment of the routing width during work for greater flexibility. 8
20 2 hing. system. Stability DOMINO dowel sizes Combina possible rou 5 x 30 5 5 6 x 40 20 Maximum joint stability. The oval DOMINO shape has a large gluing area and guarantees maximum stability. The DOMINO is as stable as a tongueand-groove joint, only much quicker to manufacture and more variable, especially in frame and rack assembly. 5 2 8 x 40 20 5 2 Load test: oak corner joint. Conventional solutions versus the DOMINO 8 x 50 Load applied 25 Load path 0 x 50 x biscuit dowel 2x round dowels x DOMINO Glued joint breaks after 2. mm. Glued joint breaks after 2.3 mm. Glued joint holds firm. Load test was stopped at 4 mm. 25 The right DOMINO dowel for every application. Source: Festool testing laboratory July 2005. The DOMINO dowel is available in 5 sizes for a wide range of applications and material thicknesses. The depth stop on the DOMINO dowel jointer allows you to route pairs of holes so that 9
tion of ting depths Routing depths DOMINO assortment 20 5 5 20 Always the right DOMINO dowel to hand. Whether in the workshop or at the assembly location all sizes of DOMINO dowel are clearly arranged and easy to find in the DOMINO assortment Systainer. The complete jointer bit assortment is also included in the scope of delivery. DOMINO dowels and cutters are easy to recognise because of the colour code on the packaging. 25 25 DOMINO top-up packs each contain DOMINO dowels in one size. The contents of the pack are divided into six plastic bags. One bag fits perfectly into the compartments in an assortment Systainer. the DOMINO dowel can be accommodated either centrally or offset. 0
hing. system. Handling Accessories Routing as never before. Business as usual. The DOMINO dowel jointer makes your work easier. You do not need spend time becoming accustomed to the machine if you have been previously working with a round or biscuit dowel jointer. With an ergonomic shape and easy to use controls, you can start using the DOMINO dowel jointer immediately whether mitering or working in a horizontal or vertical position. Effective accessories that make your work easier. For example, aligning narrow wooden strips perfectly in preparation for routing no problem with the trim stop. The stop allows you to centrally position and secure strip material with widths of 22 mm and above quickly and reliably. The stop can also be used for mitre routing. Trim stop. For strip material with widths between 22 and 70 mm. Accessories Cross stop. Repeat hole spacing between 00 mm and 205 mm can be transferred without marking scribe lines on the workpiece. Accessories Support bracket. Expands the contact surface and makes the jointer even more secure when resting on edges. Scope of delivery
The DOMINO jointing system. More versatile, more stable, faste DOMINO. The jointing system where everything fits perfectly. Furniture manufacture Shopfitting/Interior fitting Window construction Exhibition stand construction For frame and rack joints For panel joins Applications Features One system for all panel, frame and rack joints Patented routing principle unique to handheld machines for accurate work with no kickbacks Stops that are quick and easy to adjust, for accurate results Rotation-proof joint with DOMINO dowels providing maximum stability 5 dowel sizes for different material thicknesses and applications Efficient extraction of up to 95% of chips generated Power consumption Cutter spindle speed Routing depth stop DOMINO slot cutter dia. Routing height adjuster with scale Movable stepped stop Mitre routing Dust extractor connection diameter Weight 2 Technical data 420 W 24300 rpm 2, 5, 20, 25, 28 mm 5, 6, 8, 0 mm 5 30 mm 6, 20, 22, 25, 28, 36, 40 mm 0 90 stop positions at 0, 22.5, 45, 67.5, 90 27 mm 3.2 kg DOMINO Interactive Product Tour on CD-ROM With the Interactive Product Tour, you can experience all of the possibilities and advantages of the DOMINO jointing systems: applications, product features and accessories. Pictures, films and texts immerse you in the world of the DOMINO system, whenever you have the time and whenever you feel like it. You can obtain the application CD ROM free of charge by requesting it on the Festool Homepage, from your specialist dealer or sending off the enclosed postcard.
r. 7 2 6 2 8 4 3 5 6 7 8 DOMINO dowel jointer DF 500 Model Equipment/Scope of delivery Order no. DF 500 Q-Plus DOMINO dowel jointer DF 500, DOMINO cutter D 5, support bracket, operating tool, SYSTAINER size 2 574228 System accessories Product Explanation/Dimensions Qty. in pack/pcs Order no. 2 DOMINO dowel 5 x 30 mm 800 (6 x 300) 493296 3 DOMINO dowel 6 x 40 mm 40 (6 x 90) 493297 4 DOMINO dowel 8 x 40 mm 780 (6 x 30) 493298 5 DOMINO dowel 8 x 50 mm 600 (6 x 00) 493299 6 DOMINO dowel D 0 x 50 mm 50 (6 x 85) 493300 7 DOMINO assortment Systainer DOMINO dowel assortment consisting of 5 x 30, 6 x 40, 8 x 40, 8 x 50, 0 x 50 mm DOMINO cutters D 5, 6, 8, 0 mm, SYSTAINER size 2 05 (600,90,30,00,85) One of each 49330 8 DOMINO cutter D 5-NL20HW-DF500 493490 9 DOMINO cutter D 6-NL28HW-DF500 49349 0 DOMINO cutter D 8-NL28HW-DF500 493492 DOMINO cutter D 0-NL28HW-DF500 493493 2 Mobile dust extractor CTM 22 E Tested as per EN 60335/IEC 355 standard with approval for dust category M 583302 3 Trim stop LA-DF 500 for strip material between 22 and 70 mm in width 493487 4 Cross stop QA-DF 500 for repeat hole spacing between 00 and 205 mm 493488 5 Multifunction table MFT 080 Table with perforated board and foldaway legs, swivel unit, support unit, angle stop, stop flag 490888 6 Clamps FSZ 20 Solid steel, clamping range 20 mm 2 489570 7 Clamps FSZ 300 Solid steel, clamping range 300 mm 2 48957 8 Lever clamp FS-HZ 60 Solid steel, clamping range 60 mm 49594 3
www.festool.com.au Your link to more information News and promotions Online product catalogue Online shop Dealer search Test reports Service Application examples 3D animations On the Festool site you can find information about new products helpful application examples our comprehensive after-sales service the complete product range product features in detail And all of this at your leisure. Order around the clock from your Festool System Partner Dealer. It s easy: just visit www.festool.com.au www.festool.com.au TTS Tooltechnic Systems (AUST) P/L 63-65 Quantum Close/PO Box 440 Dandenong VIC 375/364 Phone: 03 9799 9733 Fax: 03 9766 9766 Service Hotline: 800 063 900 E-mail: festool@festool.com.au Three years guarantee that means three years security. Festool grants a year guarantee from the date of purchase, as long as the tool has been used correctly. This guarantee is automatically extended by a further two years, provided that the warranty form with every new tool is completed correctly and returned to Festool Australia within 30 days of the date of purchase. Subject to alterations and errors. All illustrations are non-binding. Created for TTS Tooltechnic Systems AG & Co. KG, DE - 73240 Wendlingen, 0/2005 Dealer