DATA SHEET DME, DMF, DMJ Series: Silicon Beam-Lead Schottky Mixer Diodes Singles, Pairs, and Quads in Ceramic Hermetic Packages Applications Microwave integrated circuits Mixers Detectors Features Low /f noise Low intermodulation distortion Hermetically sealed packages Statistical process control wafer fabrication Packages rated MSL, 60 C per JEDEC J-STD-00) Description The Isolink silicon Schottky barrier mixer diodes are designed for applications through 0 GHz. Schottky barrier mixer diodes are made by the deposition of a suitable barrier metal on an epitaxial silicon substrate to form the junction. The process and choice of materials result in low series resistance with a narrow spread of capacitance values for close impedance control. A variety of forward voltages are available ranging from low values for low, or starved, local oscillator drive levels to high values for high drive, low distortion mixer applications. These Schottky barrier mixer diodes are available in a wide range of packages. Capacitance ranges and series resistances are comparable with the packaged devices that are available up to, and including, the Kaband. Schottky barrier diodes are categorized by universal mixer applications in six frequency ranges: S, C, X, Ku, K, and Ka bands as noted in Table. They may also be used as modulators and high-speed switches. The absolute maximum ratings of the DME, DMF, and DMJ series of Schottky mixer diodes are provided in Table. Electrical and physical specifications are provided in Tables through 9. Typical performance characteristics are shown in Figures through. Typical mixer circuits are shown in Figure. Package dimensions are provided in Figures 5 through. Table. Frequency Table Frequency Band Frequency (GHz) S to C to 8 X 8. to. Ku. to 8.0 K 8.0 to 6.5 Ka 6.5 to 0.0 Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07
Table. Absolute Maximum Ratings (Note ) Parameter Symbol Minimum Typical Maximum Units Maximum current Imax 00 ma Power dissipation (continuous wave) Pd 75 mw/junction Storage temperature TSTG 65 +75 C Operating temperature TA 65 +75 C Electrostatic discharge: ESD Human Body Model (HBM), Class 0 < 50 V Note : Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although these devices are designed to be as robust as possible, electrostatic discharge (ESD) can damage them. These devices must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07
Table. Electrical Specifications: Beam-Lead Single N-Type Low, Medium, High Drive Schottky Diodes Frequency Band Part Number Barrier VF @.0 ma (mv) Rs @ 5.0 ma (Ω) Total Capacitance (CT) @ 0 V (pf) VB @ 0 ua (V) Minimum Maximum Maximum Maximum Minimum S, C DMF80-0 Low 00 60 5 0.60 S, C DMF80-50 Low 00 60 5 0.60 S, C DME7-0 Medium 00 00 5 0.60 S, C DME7-50 Medium 00 00 5 0.60 S, C DMJ8-0 High 500 600 5 0.60 S, C DMJ8-50 High 500 600 5 0.60 X DMF8-0 Low 0 00 8 0.0 X DMF8-50 Low 0 00 8 0.0 X DME957-0 Medium 5 5 8 0.0 X DME957-50 Medium 5 5 8 0.0 X DMJ777-0 High 550 650 8 0.0 X DMJ777-50 High 550 650 8 0.0 Ku DMF-0 Low 60 0 0.5 Ku DMF-0 Low 60 0 0.5 Ku DMF-50 Low 60 0 0.5 Ku DME-0 Medium 50 50 0.5 Ku DME-0 Medium 50 50 0.5 Ku DME-50 Medium 50 50 0.5 Ku DMJ8-0 High 500 680 0.5 Ku DMJ8-0 High 500 680 0.5 Ku DMJ8-50 High 500 680 0.5 K, Ka DMF8-0 Low 70 50 8 0.5 K, Ka DMF8-0 Low 70 50 8 0.5 K, Ka DME58-0 Medium 75 550 8 0. K, Ka DME58-0 Medium 75 550 8 0. K, Ka DMJ85-0 High 600 700 8 0. K, Ka DMJ85-0 High 600 700 8 0. Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07
Table. Electrical Specifications: Beam-Lead Series Pair, N-Type Low, Medium, High Drive Schottky Diodes Frequency Band Part Number Barrier VF @.0 ma (mv) Rs @ 5.0 ma (Ω) Total Capacitance (CT) @ 0 V (pf) VB @ 0 ua (V) Minimum Maximum Maximum Maximum Minimum S, C DMF85- Low 00 60 5 0.60 S, C DMF85-5 Low 00 60 5 0.60 S, C DME050- Medium 00 00 5 0.60 S, C DME050-5 Medium 00 00 5 0.60 S, C DMJ09- High 500 600 5 0.60 S, C DMJ09-5 High 500 600 5 0.60 X DMF86- Low 0 00 8 0.0 X DMF86-5 Low 0 00 8 0.0 X DME89- Medium 5 5 8 0.0 X DME89-5 Medium 5 5 8 0.0 X DMJ09- High 550 650 8 0.0 X DMJ09-5 High 550 650 8 0.0 Ku DMF87- Low 60 0 0.5 Ku DMF87- Low 60 0 0.5 Ku DMF87-5 Low 60 0 0.5 Ku DME80- Medium 50 50 0.5 Ku DME80- Medium 50 50 0.5 Ku DME80-5 Medium 50 50 0.5 Ku DMJ8- High 500 680 0.5 Ku DMJ8- High 500 680 0.5 Ku DMJ8-5 High 500 680 0.5 K, Ka DMF88- Low 70 50 8 0. K, Ka DMF88- Low 70 50 8 0. K, Ka DME8- Medium 75 550 8 0. K, Ka DME8- Medium 75 550 8 0. K, Ka DMJ8- High 600 700 8 0. K, Ka DMJ8- High 600 700 8 0. Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07
Table 5. Electrical Specifications: Beam-Lead Common Cathode, N-Type Low, Medium, High Drive Schottky Diodes Frequency Band Part Number Barrier VF @.0 ma (mv) Rs @ 5.0 ma (Ω) Total Capacitance (CT) @ 0 V (pf) VB @ 0 ua (V) Minimum Maximum Maximum Maximum Minimum S, C DMF8- Low 00 60 5 0.60 S, C DMF8-5 Low 00 60 5 0.60 S, C DME05- Medium 00 00 5 0.60 S, C DME05-5 Medium 00 00 5 0.60 S, C DMJ08- High 500 600 5 0.60 S, C DMJ08-5 High 500 600 5 0.60 X DMF8- Low 0 00 8 0.0 X DMF8-5 Low 0 00 8 0.0 X DME06- Medium 5 5 8 0.0 X DME06-5 Medium 5 5 8 0.0 X DMJ09- High 550 650 8 0.0 X DMJ09-5 High 550 650 8 0.0 Ku DMF8- Low 60 0 0.5 Ku DMF8-5 Low 60 0 0.5 Ku DME07- Medium 50 50 0.5 Ku DME07-5 Medium 50 50 0.5 Ku DMJ0- High 500 680 0.5 Ku DMJ0-5 High 500 680 0.5 K, Ka DMF8- Low 70 50 8 0. K, Ka DME86- Medium 75 550 8 0. K, Ka DMJ86- High 600 700 8 0. Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07 5
Table 6. Electrical Specifications: Beam-Lead Anti-Parallel, N-Type Low, Medium, High Drive Schottky Diodes Frequency Band Part Number Barrier VF @.0 ma (mv) Rs @ 5.0 ma (Ω) Total Capacitance (CT) @ 0 V (pf) VB @ 0 ua (V) Minimum Maximum Maximum Maximum Minimum S, C DMF85- Low 00 60 5 0.60 S, C DMF85-5 Low 00 60 5 0.60 S, C DME8- Medium 00 00 5 0.60 S, C DME8-5 Medium 00 00 5 0.60 S, C DMJ0- High 500 600 5 0.60 S, C DMJ0-5 High 500 600 5 0.60 X DMF86- Low 0 00 8 0.0 X DMF86-5 Low 0 00 8 0.0 X DME8- Medium 5 5 8 0.0 X DME8-5 Medium 5 5 8 0.0 X DMJ0- High 550 650 8 0.0 X DMJ0-5 High 550 650 8 0.0 Ku DMF87- Low 60 0 0.5 Ku DMF87-5 Low 60 0 0.5 Ku DME8- Medium 50 50 0.5 Ku DME8-5 Medium 50 50 0.5 Ku DMJ6- High 500 680 0.5 Ku DMJ6-5 High 500 680 0.5 K, Ka DMF87- Low 70 50 8 0. K, Ka DME88- Medium 75 550 8 0. K, Ka DMJ89- High 600 700 8 0. Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07 6
Table 7. Electrical Specifications: Beam-Lead Ring Quad, N-Type Low, Medium, High Drive Schottky Diodes Frequency Band Part Number Barrier VF @.0 ma (mv) Rs @ 5.0 ma (Ω) Total Capacitance (CT) @ 0 V (pf) VB @ 0 ua (V) Minimum Maximum Maximum Maximum Minimum S, C DMF865- Low 00 60 5 0.60 S, C DMF865-5 Low 00 60 5 0.60 S, C DME857- Medium 00 00 5 0.60 S, C DME857-5 Medium 00 00 5 0.60 S, C DMJ50- High 500 600 5 0.60 S, C DMJ50-5 High 500 600 5 0.60 X DMF0- Low 0 00 8 0.0 X DMF0-5 Low 0 00 8 0.0 X DME858- Medium 5 5 8 0.0 X DME858-5 Medium 5 5 8 0.0 X DMJ990- High 550 650 8 0.0 X DMJ990-5 High 550 650 8 0.0 Ku DMF0- Low 60 0 0.5 Ku DMF0- Low 60 0 0.5 Ku DMF0-5 Low 60 0 0.5 Ku DME859- Medium 50 50 0.5 Ku DME859- Medium 50 50 0.5 Ku DME859-5 Medium 50 50 0.5 Ku DMJ667- High 500 680 0.5 Ku DMJ667- High 500 680 0.5 Ku DMJ667-5 High 500 680 0.5 K, Ka DMF5- Low 70 50 8 0.5 K, Ka DMF5- Low 70 50 8 0.5 K, Ka DME59- Medium 75 550 8 0. K, Ka DME59- Medium 75 550 8 0. K, Ka DMJ55- High 600 700 8 0. K, Ka DMJ55- High 600 700 8 0. Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07 7
Table 8. Electrical Specifications: Beam-Lead Bridge Quad, N-Type Low, Medium, High Drive Schottky Diodes Frequency Band Part Number Barrier VF @.0 ma (mv) Rs @ 5.0 ma (Ω) Total Capacitance (CT) @ 0 V (pf) VB @ 0 ua (V) Minimum Maximum Maximum Maximum Minimum S, C DMF076-5 Low 00 60 5 0.60 S, C DMF076-55 Low 00 60 5 0.60 S, C DME09-5 Medium 00 00 5 0.60 S, C DME09-55 Medium 00 00 5 0.60 S, C DMJ-5 High 500 600 5 0.60 S, C DMJ-55 High 500 600 5 0.60 X DMF077-5 Low 0 00 8 0.0 X DMF077-55 Low 0 00 8 0.0 X DME850-5 Medium 5 5 8 0.0 X DME850-55 Medium 5 5 8 0.0 X DMJ088-5 High 550 650 8 0.0 X DMJ088-55 High 550 650 8 0.0 Ku DMF078-5 Low 60 0 0.5 Ku DMF078-5 Low 60 0 0.5 Ku DMF078-55 Low 60 0 0.5 Ku DME0-5 Medium 50 50 0.5 Ku DME0-5 Medium 50 50 0.5 Ku DME0-55 Medium 50 50 0.5 Ku DMJ768-5 High 500 680 0.5 Ku DMJ768-5 High 500 680 0.5 Ku DMJ768-55 High 500 680 0.5 K, Ka DMF88-5 Low 70 50 8 0.5 K, Ka DMF88-5 Low 70 50 8 0.5 K, Ka DME85-5 Medium 75 550 8 0. K, Ka DME85-5 Medium 75 550 8 0. K, Ka DMJ85-5 High 600 700 8 0. K, Ka DMJ85-5 High 600 700 8 0. Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07 8
Table 9. Electrical Specifications: Epoxy Packaged Octo Quad Ring, N-Type Low, Medium, High Drive Schottky Diodes Frequency Band Part Number Barrier VF @.0 ma (mv) Rs @ 5.0 ma (Ω) Total Capacitance (CT) @ 0 V (pf) VB @ 0 ua (V) Minimum Maximum Maximum Maximum Minimum S to X DMF98-57 Low 00 50 6 0.0 S to X DME99-57 Medium 600 800 6 0.0 6 S to X DMJ90-57 High 000 00 6 0.0 8 Typical Performance Characteristics Forward Current (ma) 0.0 5.0 P Type Zero Bias.0.0 0.5 N Type Medium Drive 0. (DME) 0. 0.05 N Type Low 0.0 Drive (DMF) 0.0 0.005 0.00 0.00 0 0 0 60 80 600 Forward Voltage (mv) Figure. Typical Forward DC Characteristic Curves (Voltage vs Current) Forward Current (ma) 0.0 N-Type High 5.0 Driver (DMJ).0 Junction.0 0.5 0. 0. 0.05 0.0 0.0 0.005 0.00 N-Type High Driver (DMJ) Junctions N-Type High Driver (DMJ) Junctions 0.00 0 0.80 0.960.0.90.00 Forward Voltage (mv) Figure. Typical Forward DC Characteristic Curves (Voltage vs current) NF (db) ZIF (Ω) 700 600 ZIF CC (ma) 6.0 5.0 0 9 500 00 NF.0.0 8 00.0 7 6 00 00.0 CC 0 0 0.05 0. 0. 0.5 5 0 Local Oscillator Driver (mw) Figure. Typical X-Band Low Drive Mixer Diode RF Parameters vs Local Oscillator Drive Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07 9
Single Ended Mixer SIG Input LO Input Coupler Matching Network RF Bypass IF Output Balanced Mixer SIG Input LO Input db Hybrid Coupler Matching Network Matching Network DC Return RF Bypass IF Output Double Balanced Mixer LO Input SIG Input IF Output Figure. Typical Mixer Circuits Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07 0
Figure 5. -0 Package Dimensions Y86 Y87 Figure 6. - Package Dimensions Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07
A B 0.068 (.7 mm) 0.06 (.6 mm) Dia. 0.85 (.70 mm) 0.5 (.68 mm) Plcs. -0 () Denotes Cathode 0.0 (0.56 mm) 0.08 (0.6 mm) Plcs. 0.070 (.78 mm) Sq. 0.005 (0. mm) 0.00 (0.08 mm) Plcs. 0.0 (.07 mm) 0.08 (0.7 mm) Figure 7. - Package Dimensions A B 0.068 (.7 mm) 0.06 (.6 mm) Dia. 0.85 (.70 mm) 0.5 (.68 mm) Plcs. -0 () Denotes Cathode 0.0 (0.56 mm) 0.08 (0.6 mm) Plcs. 0.070 (.78 mm) Sq. 0.005 (0. mm) 0.00 (0.08 mm) Plcs. 0.0 (.07 mm) 0.08 (0.7 mm) Figure 8. - Package Dimensions Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07
5 Ref. Denotes Lead 0.068 (.7 mm) 0.06 (.6 mm) 0.85 (.70 mm) 0.5 (.68 mm) 0.0 (0.56 mm) 0.08 (0.6 mm) 0.070 Sq. (.78mm) 0.005 (0. mm) 0.00 (0.08 mm) Ceramic Metal 0.0 (.07 mm) 0.08 (0.7 mm) Figure 9. - Package Dimensions 0.0 (0.56 mm) 0.08 (0.6 mm) 0.068 (.7 mm) 0.06 (.6 mm) Dia. 0.85 (.70 mm) 0.5 (.68 mm) 0.070 (.78 mm) Sq. 0.0 (.07 mm) 0.08 (0.7 mm) 0.005 (0. mm) 0.00 (0.08 mm) Figure 0. -5 Package Dimensions Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07
Denotes Cathode 50 Deg. 0 Deg. 0.090 (.9 mm) Min. Plcs. 0.0 (0. mm) 0.07 (0. mm) Plcs. 0.00 (0.08 mm) 0.005 (0. mm) Au-Plated Leads 0.00 (0.76 mm) 0.008 (0.0 mm) 0.0 (0.0 mm) 0.05 (.0 mm) 0.055 (.0 mm) Ceramic Base Figure. -0 Package Dimensions 0.090 (.9 mm) Min. Plcs. 0.05 (.0 mm) 0.055 (.0 mm) Denotes Cathode 0.0 (0. mm) 0.07 (0. mm) Plcs. Au-Plated Leads 0.00 (0.76 mm) 0.00 (0.08 mm) 0.005 (0. mm) Ceramic Base 0.008 (0.0 mm) 0.0 (0.0 mm) Figure. - Package Dimensions Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07
0.008 (0.0 mm) 0.090 (.9 mm) Min. 0.00 (0.5 mm) 0.0 (0. mm) 0.07 (0. mm) Denotes Pin 0.00 (0.08 mm) 0.005 (0. mm) Au-Plated Leads 0.00 (0.76 mm) Ceramic Base 0.05 (.0 mm) 0.055 (.0 mm) 0.008 (0.0 mm) 0.0 (0.0 mm) Figure. - Package Dimensions 0.008 (0.0 mm) 0.00 (0.5 mm) 0.0 (0. mm) 0.07 (0. mm) 0.090 (.9 mm) Min. Denotes Pin 0.00 (0.08 mm) 0.005 (0. mm) Ceramic Base 0.05 (.0 mm) 0.055 (.0 mm) Au-Plated Leads 0.008 (0.0 mm) 0.0 (0.0 mm) 0.00 (0.76 mm) Figure. -5 Package Dimensions Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07 5
Denotes Cathode 0.00 (.5 mm) Dia. 0.090 (.8 mm) 0.0 (.79 mm) Plcs. 50 Deg. 0 Deg. 0.08 (0.5 mm) 0. (0.55 mm) Plcs. 0.00 (0.08 mm) 0.005 (0. mm) Au-Plated Leads 0.08 (0.5 mm) 0. (0.55 mm) 0.050 (.7 mm) Figure 5. -50 Package Dimensions 0.00 (.5 mm) Dia. 0.090 (.8 mm) 0.0 (.79 mm) Plcs. 50" 0' 0" 0' 0.08 (0.5 mm) 0.0 (0.55 mm) Plcs. Au-Plated Leads 0.00 (0.08 mm) 0.005 (0. mm) Ceramic Base 0.08 (0.5 mm) 0.0 (0.55 mm) 0.050 (.7 mm) Figure 6. -5 Package Dimensions Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07 6
Denotes Cathode 50/0 0.00 (.5 mm) Dia. 0.08 (0.5 mm) 0.0 (0.55 mm) Plcs. 0.050 (.7 mm) Ceramic Base 0.09 (0.8 mm) 0.0 (0.5 mm) Au Plated Leads 0.00 (0.08 mm) 0.005 (0. mm) Figure 7. -5 Package Dimensions Denotes Cathode 0.00 (.5 mm) Dia. 0.095 (. mm) 0.05 (.67 mm) Plcs. 0.08 (0.6 mm) 0.0 (0.56 mm) Plcs. 50/0 Au-Plated Leads 0.00 (0.08 mm) 0.005 (0. mm) Plcs. Ceramic Base 0.09 (0.8 mm) 0.0 (0. mm) 0.00 (.0 mm) Figure 8. -5 Package Dimensions Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07 7
0.00 (.5 mm) Dia. Denotes Lead 0.0 (0.0 mm) 0.09 (0.6 mm) 0.0 (0.56 mm) 0.0 (0.0 mm) 0.090 (.8 mm) 0.0 (.79 mm) Au-Plated Leads 0.00 (0.08 mm) 0.005 (0. mm) 0.08 (0.6 mm) 0.0 (0.56 mm) Plcs. Ceramic Base 0.050 (.7 mm) Figure 9. -5 Package Dimensions 0.0 (0.0 mm) 0.0 (0.0 mm) 0.00 (.7 mm) Dia. 0.090 (.9 mm) 0.0 (.79 mm) Au-Plated Leads 0.00 (0.08 mm) 0.005 (0. mm) Ceramic Base 0.08 (0.6 mm) 0.0 (0.56 mm) 0.08 (0.6 mm) 0.0 (0.56 mm) 0.050 (.7 mm) Figure 0. -55 Package Dimensions Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07 8
0.0 (0.00 mm) Denotes Cathode 0.0 (0.00 mm) 0.00 (.7 mm) Dia. Au-Plated Leads 0.00 (0.08 mm) 0.005 (0. mm) 0.090 (.9 mm) 0.0 (.79 mm) Ceramic Base 0.08 (0.6 mm) 0.0 (0.56 mm) 0.08 (0.6 mm) 0.0 (0.56 mm) 0.050 (0.76 mm) Figure. -57 Package Dimensions Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07 9
Copyright 0, 07 Isolink, Inc. All Rights Reserved. Information in this document is provided in connection with Isolink, Inc. ( Isolink ), a wholly-owned subsidiary of Skyworks Solutions, Inc. These materials, including the information contained herein, are provided by Isolink as a service to its customers and may be used for informational purposes only by the customer. Isolink assumes no responsibility for errors or omissions in these materials or the information contained herein. Isolink may change its documentation, products, services, specifications or product descriptions at any time, without notice. Isolink makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Isolink assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Isolink products, information or materials, except as may be provided in Isolink Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. ISOLINK DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. ISOLINK SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Customers are responsible for their products and applications using Isolink products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Isolink assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Isolink products outside of stated published specifications or parameters. Isolink is a trademark of Isolink Inc. in the United States and other countries. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Phone [08] 96-968 Fax [08] 96-960 hirel.sales@skyworksinc.com www.skyworksinc.com 06B Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice. April 8, 07 0