PRODUCT SERIES Round Indicator Lights Page 8, &. 9. &..7 - NEMA -R.7 8 & 9. 7. 8. 9 7. 8. - NEMA -R.9.9 Indicator Lights.7,.. 7. Rectangular Indicator Lights Panel Cutout. x.. x. 7 & 7. x.8 8. x. 9 & 7. x. 9 &.8 x.7 Rear Mount Indicators Mounting & Varies with Lens Additional Items Lamps & 's Technical Marking Department All SoLiCo products are RoHS Agency Approvals: The majority of our indicators carry Agency approvals. Please contact us for the latest Agency information for the specific series and voltages you require. RoHS REACH SoLiCo Facilities Hartford, Connecticut Brownsville, Texas Matehuala, Mexico TUV Information IEC 98--:979+A:987 IEC 98-:8 EN:98--:989 EN:98-:8+A:9 UL Information File # E7(M) Catalog. Sept
Round Indicators Series 8,, Press fits into." panel hole, incandescent, and neon illumination Three lens styles available 8 Series wire leads Body Material: Lens Material: Bezel Material: Wire Gauge:.9. Nylon Polycarbonate Brass (Plated) 8 ga.. Wire Strip: /" Terminals:.87 Tabs Panel Thickness:." min Certifications: Contact Us.. Series wire leads.9..9... with metal bezel Series tab terminals.9.9.7 Ø." Dia. 8 8 8 9 " Wire.87 Tabs None Bright Flush Translucent Flush Diamond High Translucent, High Rings Dome Translucent, Dome Rings Clear is Translucent Clear is Transparent.8.8.8 Lens Flush. Lens High Lens Dome.. Series 8 Only. Bezel Required. Translucent Lens is not recommended for use with. Specify. Series only. neon not available on Series Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Series 9 Press fits into." panel hole Body and lens are one piece construction, incandescent, and neon illumination Body & Lens Material: Polycarbonate Wire Gauge: ga. Wire Strip: /" Panel Thickness:." min Certifications: Contact Us Round Indicators.7... Ø." Dia. 9 8 8 9 " Wire None Semi-Dome Cylinder Dome Clear.8..8..8.9. Specify Lens Lens Lens Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Round Indicators Series, Snap fits into." panel hole Body and lens are one piece construction, incandescent, and neon illumination Series Body & Lens Material: Polycarbonate Terminals:.87 Tabs Wire Gauge: 8 ga. Wire Strip: /" Panel Thickness:." to." max Certifications: Contact Us.9... Series....7 Ø." 8 " Wire 87 Tabs None Semi-Dome Diamonds Dome Plain Clear 8 9.8.9...8.9 Lens Lens Lens. Specify color. Components provided in leads when Series is specified with lamp codes -. Available with (V) and incandescent lamps only, contact factory for additional information. Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Series Snap fits into.7" panel hole Body and lens are one piece design, incandescent, and neon illumination Three lens styles available Splashproofproof Body & Lens Material: Polycarbonate Wire Gauge: ga. Wire Strip: /" Panel Thickness:." to.9" max Certifications: Contact Us Round Indicators... Ø.7" Dia. 8 " Wire None Semi-Dome Rings Dome Plain Clear 8 9....8.8.8 Lens Lens Lens. Specify. Requires components in wire leads Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Round Indicators Series Fits into.7 panel hole, incandescent, and neon illumination Sealed, NEMA -R Body Material: Nylon Lens Material: Polycarbonate Wire Gauge: 8 ga. Wire Strip: /" Terminals:.87 Tabs Panel Thickness:." to." Certifications: Contact Us. /8- Thread.".. (max. nut torque: ozs/in).. Ø.7" Dia...7 Alternate 8 8 9 " Wire.87 Tabs Stainless Bright Cylinder Translucent Cylinder Translucent Cylinder Translucent Small Dome Translucent Small Dome Lines Large Dome Translucent Large Dome Lines Flush Lens w/tapered Bezel 7 7 7 8 8 8 9 9 9 Clear Yellow Clear Yellow 8 Marked A B C D E F H. Translucent Lens not recommended for use with. Specify. Wire Leads only. Bright Bezel only, use code Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Series 8, 9 Fits into." panel hole, incandescent, and neon illumination Many lens styles available 8 Series wire leads press fit 8 with lens Body Material: Lens Material: Bezel Material:..8 Nylon Polycarbonate Stainless Steel or Plated Brass.9 Wire Gauge: 8 ga. Wire Strip: /" Panel Thickness:." to.9 Certifications: Contact Us. Round Indicators....9. 9 Series wire leads snap fit 9 with 8 lens... Ø." Series Lamp Termination Base Bezel Lens 8 9 8 8 9 " Wire Lens 7 Lens 8 Lens 9 Lens None Stainless Bright Cylinder Translucent Cylinder Translucent Cylinder Translucent Small Dome Translucent Small Dome Lines Large Dome Translucent Large Dome Lines Semi Dome Translucent, Semi Dome Rings Flush Lens w/tapered Bezel Cap, (FC) Translucent, Cap, (FC) Transparent 7 7 7 8 8 8 9 9 9 Clear Clear Plain Marked A B C D E F Lens Lens Lens Cap is Translucent Clear is Transparent. Translucent Lens is not recommended for use with. Specify. Bezel not available. Bright Bezel only, use code Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9 7
Round Indicators Series Snap fits into." panel hole, incandescent, and neon illumination Many lens styles available Series Body Material: Nylon Lens Material: Polycarbonate Bezel Material: Stainless steel or plated brass Terminals:.87 or. Tabs Panel Thickness:." to.9" Certifications: Contact Us with 8 lens.... Ø. 8 8 9.87 Tabs. Tabs Lens 7 Lens 8 Lens 9 Lens None Stainless Bright Cylinder Translucent Cylinder Translucent Cylinder Translucent Small Dome Translucent Small Dome Lines Large Dome Translucent Large Dome Lines Semi Dome Translucent, Semi Dome Rings Flush Lens w/tapered Bezel Cap, (FC) Translucent, Cap, (FC) Transparent 7 7 7 8 8 8 9 9 9 Clear Clear Plain Marked A B C D E F Lens Lens Lens Cap is Translucent Clear is Transparent. Translucent Lens is not recommended for use with. Specify. Bezel not available. Bright Bezel only, use code 8 Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Series Snap fits into." panel hole Body and lens are one piece design, incandescent, and neon illumination Splashproof Body & Lens Material: Polycarbonate Wire Gauge: ga. Wire Strip: /" Terminals:.87 or. Tabs Panel Thickness:." to.9 Certifications: Contact Us with 7 lens Round Indicators with 9 lens.9 Ø." Dia. 8 8 9 " Wire.87 Tabs. Tabs None Bright Semi-Dome Rings Semi-Dome Rings w/ Bezel 7 8 9 Clear......9 Lens 7 Lens 8 w / bezel Lens 9. Specify. Lens 7 and 9 only. Bright - Lens 8 only Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9 9
Round Indicators Series 7 Fits into." panel hole, incandescent, and neon illumination Sealed, NEMA -R Body & Lens Material: Polycarbonate Bezel Material: Stainless steel or plated brass Terminals:.87 or. Tabs Panel Thickness:." to." Certifications: Contact Us Ø.... (Typ) (max. nut torque: ozs/in). Alternate. 7 8 8 9.87 Tabs. Tabs Lens 7 Lens 8 Lens 9 Lens None Stainless Bright Cylinder Translucent Cylinder Translucent Cylinder Translucent Small Dome Translucent Small Dome Lines Large Dome Translucent Large Dome Lines Flush Lens w/tapered Bezel Cap, (FC) Translucent, Cap, (FC) Transparent 7 7 7 8 8 8 9 9 9 Clear Clear Marked A B C D E F Lens Lens Cap is Translucent Clear is Transparent. Translucent Lens is not recommended for use with. Specify. Bezel not available. Bright Bezel only, use code Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Series 8 Snap fits into." panel hole, incandescent, and neon illumination Many lens styles available Splashproof Body Material: Lens Material: Bezel Material: Wire Gauge: Polycarbonate Wire Strip: /" Polycarbonate Terminals:.87 or. Tabs Stainless Steel or Panel Thickness:." to.9 Plated Brass Certifications: Contact Us ga. Shown with lens 8 Round Indicators.....9 Ø. 8 8 8 8 9 " wire.87 Tabs. Tabs Lens 7 Lens 8 Lens 9 Lens None Stainless Bright Cylinder Translucent Cylinder Translucent Cylinder Translucent Small Dome Translucent Small Dome Lines Large Dome Translucent Large Dome Lines Semi Dome Translucent, Semi Dome Rings Flush Lens w/tapered Bezel Cap, (FC) Translucent, Cap, (FC) Transparent 7 7 7 8 8 8 9 9 9 Clear Clear Plain Marked A B C D E F Lens Lens Lens Cap is Translucent Clear is Transparent. Translucent Lens is not recommended for use with. Specify. Bezel not available. Wire Leads only. Bright Bezel only, use code Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Round Indicators Series Fits into.9" panel hole Threaded mount cluster lighting Daylight Visible Supplied w/ hex nut, lock washer and gasket Sealed, NEMA -R Body Material: Nylon Lens Material: Polycarbonate Wire Gauge: ga. Wire Strip: /"..8 Terminals:.87 or. Tabs Panel Thickness:." to.87 Certifications: Contact Us.8 /"-. (max. nut torque: lbs/in). Ø.9 Alternate Ø.9 8 " Wire.87 Tabs. Tabs None Semi-Dome Translucent Semi-Dome Rings Semi-Dome Rings w/ Diffuser A Clear, Yellow 8 is Translucent Clear is Transparent Light Output (mcd) k typ. k typ. 7k typ. k typ. Yellow 8k typ. Lens..7. uced Intensity. Daylight Visible 's may require ESD handling. Specify color Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Series Fits into.9" panel hole Threaded mount cluster lighting Daylight Visible Supplied w/ hex nut, lock washer and gasket Splashproof Body Material: Nylon Lens Material: Polycarbonate Wire Gauge: ga. Wire Strip: /". min.8 Terminals:.87 or. Tabs Panel Thickness:." to.87 Certifications: Contact Us (max. nut torque: lbs/in) Round Indicators. /- Ø.9 Mounting Hole.89. Ø.9 Alternate 8 " Wire.87 Tabs. Tabs Matte Matte Faceted Dome Translucent Faceted Dome Transparent Faceted Dome Transparent w/ Diffuser A is Translucent Light Output (mcd) k typ. k typ. 7k typ. k typ. Yellow 8k typ..7.7 Lens. uced Intensity. Daylight visible 's may require ESD handling. Translucent only. only Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Series,, Series - mm size Series & - mm Press Fit Body Material: Wire Gauge: Certifications: Nylon Series - ga., /8" Strip Series / - ga., / " strip Contact Us Indicators Series Series Series.....8.8....8.. 8,, " Wire Diffused Clear Water Clear Yellow 8 Ø.7 Ø. Contact factory with your specific requirements Series / Series. For voltages greater than V the appropriate external resistor will be provided in the lead. Not available on Series Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Series, 7 Series - mm size Series 7 - mm Threaded body - secured with lockwasher & nut or Bright finish Body Material: Wire Gauge: Brass (Plated) Series - ga. Series 7 - ga. Wire Strip: /8" Certifications: Contact Us Series Series 7 Series 7 Series Ø. Ø. Ø. Ø.9 Ø.9.8..8..9. Ø. Ø. Ø..9. Indicators 7 8 " Wire Dome Recess 7 8 Bright Diffused Clear Water Clear Yellow 8 Ø. Ø. Contact factory with your specific requirements Series 7 Series. s greater than V require components in lead wire(s) Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Series Snap fits into." x." panel cutout Incandescent and neon illumination Two lens styles available Suggested for High Temperature applications Two termination styles available Body Material: Phenolic Lens Material: Polycarbonate Terminals:. Tabs Panel Thickness:. to. Certifications: Contact Us.87..99 Rectangular Indicators 8 9. Tabs Screws Brown None.7. Standard Plain Faceted Plain....8 Clear.8. Standard Lens Faceted Lens Panel Cutout.. Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Series Snap fits into." x." panel cutout, incandescent and neon illumination Matte Dummy (hole plugs)available Body Material: Nylon Lens Material: Polycarbonate Terminals:. Tabs Panel Thickness:. to.87 Certifications: Contact Us.8..7.7.7 8 DUMMY 9. Tabs Panel Cutout Flush Translucent Flush Frost Clear Clear Plain 7 Marked A B C D E F Rectangular Indicators.. is Translucent Clear is Transparent. Translucent Lens is not recommended for use with. Specify Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9 7
Series, 7 Snap fits into." x.8" panel cutout Incandescent and neon illumination Single or dual lenses Dummy (hole plugs) available Body Material: Nylon Lens Material: Polycarbonate Wire Gauge: 8 ga. Terminals:.87 &. Tabs, Solder Lugs Panel Thickness:. to. Certifications: Contact Us 7.9.7.9.9.8 Panel Cutout..8 Rectangular Indicators 7 8 DUMMY 9.87 Tabs. Tabs Solder Std. Matte Matte Series Series 7 Single Translucent Single Diamond Single Fine Diamond Dual Translucent Dual Fine Diamond 7 7 Clear Clear Plain 7 Marked A B C D E F..7.. Series 7 Select nd lens color Flush lens style Dual lens style is Translucent Clear is Transparent 8 Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Series,, 7 Snap fits into panel cutout Incandescent and neon illumination Single or dual lenses Dummy (hole plugs) available Body Material: Nylon Lens Material: Polycarbonate Wire Gauge: 8 ga. Terminals:. Tabs, Solder Lugs Panel Thickness:. to. Certifications: Contact Us 7..8.8.8..7..8.8 7 8 DUMMY 9 " Wire. Tabs Solder Matte Matte None Stainless Rectangular Translucent Rectangular Diamond Rectangular Line Square Translucent Square Diamond Square Lines & 7 Panel Cutout Series.. Clear Clear Plain 7 Marked A B C D E F Rectangular Indicators Panel Cutout Series & 7. Series & 7 Select nd lens color. is Translucent Clear is Transparent. Series and only Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9 9
Series, Snap fits into.8 x.7 panel cutout Incandescent and neon illumination Many lens styles available Dummy (hole plugs) available Body Material: Nylon Terminals:.87 or. Tabs Lens Material Polycarbonate Panel Thickness:. to. Wire Gauge: 8 ga. Certifications: Contact Us Wire strip /".8.8...8.9....7 Rectangular Indicators 8 DUMMY 9 " Wire.87 Tabs. Tabs Matte Matte None Stainless Series Lenses Rectangular Translucent Rectangular Plain Rectangular Diamond Rectangular Frost Rectangular Lines Series Lenses Rectangular Translucent Rectangular Diamond Rectangular Frost Rectangular Lines 8 8 8 8 8 9 9 9 9 Clear Clear Plain 7 Marked A B C D E F Panel Cutout.8 Series Select nd lens color.7 is Translucent Clear is Transparent Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Series, Lens mounts from front, indicator from behind panel Incandescent and neon illumination Series has wire leads only Series available with wire leads or tab terminals Body Material: Nylon Lens Material: Polycarbonate Wire Gauge: Series - ga Series - 8 ga Wire Strip: /" Terminals:.87 Tabs or. Tabs Panel Thickness:. -.78 Certifications: Contact Us Series.78..7...7.. Series....8 8 9 " Wire.87 Tabs. Tabs. Dia Rings.7 Dia Rings Rectangular Lines No Lens No Lens No Lens 9 9 Clear.7 Lens 9 mounting hole.8" dia Lens mounting hole. " dia. Lens mounting hole.9" x." Ø.8. DIA. Lens 9 Ø..8 DIA. Lens. If Ordered without lens, lens style must still be specified, Pattern and color are "". Nominal range. Alternate lenses (style ) are available to fit thicker panels. Please consult factory. Series only.. Lens.9. Panel Cutout Rear Mount Indicators Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Lamps & 's Neon Lamps (AC) Neon lamps are constructed of a glass envelope, containing two electrodes and a mixture of inert gases. When a voltage is applied, above the "breakdown" voltage, the gas between the electrodes ionizes, creating the familiar orange-red "glow". They are rugged, reliable, cost effective and generate little heat. While light output is lower than incandescent lamps, neons are the most widely used light sources for indicators used at line voltages. Normally lighting with a red-orange glow, neons are also available in both green and blue by using special gasses and phosphorescent coatings inside the glass envelope. All neon lamps require a current limiting resistor in series with the lamp. The value of this resistor is determined by Catalog Volts Life Hours Number V, V, V, V, V, V, Please Note: All neon illuminated indicator lights ordered with a green lens will be provided with a green neon lamp; blue lenses will be provided with a blue neon lamp. three criteria: the manufacturer s specified operating characteristics, the desired brightness, and the required lamp life. While neon lamps have a typical life of, hours, this is directly proportional to the operating current. Higher current gives greater brightness, but shorter life. Although suited to both AC and DC operation, life when operated on DC is approximately % that of AC operation. Incandescent Lamps (AC/DC) Incandescent lamps are best known for their bright white light output. When an electrical current is passed through the filament, it glows white hot" creating light. The tradeoff in incandescent lamps is their susceptibility to physical shock and vibration, as the filament becomes very fragile at its elevated operating temperatures. We recommend mounting the indicator away from any vibration source, and / or cushioning the lamp within the indicator assembly with a resilient potting compound. Catalog Number Volts Size Amps Life Hours.V T - ¾., V T - ¾., V T - ¾.8, 9 8V T - ¾., Incandescent lamps can also generate significant heat, which should be considered in your application. Similar to neon lamps, operating an incandescent lamp at less than rated current will significantly increase its useful life. Using a volt incandescent lamp in a volt circuit will reduce the light output by about %, but will increase its life by a factor of four. Potting for Incandescent lamps is standard. s (DC) Note: Daylight Visible 's require ESD handling Light Emitting Diodes, or s as they are more commonly known, are cousins to the semiconductor devices like transistors and integrated circuits, and are fabricated with similar processes. The color of the is determined by the combination of materials used during the fabrication process. 's are now available in a wide variety of colors including white, and in intensities approaching that of incandescent lamps. Bi-color s are available in several color combinations. s are available in three primary styles; water clear lens for highest brightness but smallest viewing angle, color clear lens for increased viewing angle at a somewhat reduced light output, and color diffused lens for the widest viewing angle at greater reduction in light output. Light output for s is measured in millicandellas (mcd) and is specified by minimum and typical values. s are DC (direct current) devices, although SoLiCo can provide a number of our products configured to use s as AC (alternating current) devices. S: Due to rapidly changing technology, not all devices listed in our catalog may be available as described. We reserve the right to supply the closest equivalent device in appearance and performance. Please contact us to discuss your specific indicator requirements. We have the experience and technical knowledge to find your solution. Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Technical Material Wire length tolerance is: ± ¼" on leads less than " ± ½"; leads " to " ± " on leads greater than " Strip length tolerance is: ± ¹ " maximum operating temperature is: 7 C Housing Materials High-Temperature Nylon (bases) Polycarbonate (lenses & bases) Chemical Resistant Nylon ( Series only) Imprinting Hot Stamping Hot stamping uses a heated metal die, engraved with the required legend, under pressure to force ink into a plastic surface, offering excellent durability. Hot stamping is normally done in black or white, and is best suited to text and simple line art. If no ink color is specified, hot stamping will be done in black, and the orientation of the imprint will be horizontal. Hot stamp charges are "per imprint", which is defined as a marking applied in one operation. The tooling charge for a Hot Stamp Die (not already available) is $8. per die. Minimum quantity is pieces. A set-up charge of $. will apply to quantities of less than pieces per legend. Pad Printing Pad printing (also known as transfer printing), uses a soft rubber pad to pick up ink from an engraved plate and transfers it to the part to be marked. Pad printing is normally done in black or white, but can be done in any color for which ink is available. If no ink color is specified, white ink will be used. Text and images can be very accurately reproduced with this method. For additional durability in abrasive or high-wear applications, a clear overcoat can be applied over the marking. Pad print charges are "per hit", which is defined as a marking applied in one operation. The artwork and plate charge for a Pad Print Plate (not already available) is $8.. Depending on size and complexity, multiple legends can be accommodated on a single plate, please contact the sales department for details. Minimum quantity is pieces per legend. A set up charge of $. will apply to quantities of less than pieces. Marking Orientation Operating Temperature C C C UL Rating 9V- 9V- Nominal operating temperature listed. Specific temperatures vary according to material thickness. Please consult factory. Horizontal Lens Horizontal Legend Vertical Lens Vertical Legend Vertical Lens Horizontal Legend Series 7 Standard Orientation HORIZONTAL V E R T I C A L HORIZ PRINT Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9
Marking Department Pad Printing SoLiCo has the capability of pad printing on almost any of our product surfaces. Pad printing, sometimes referred to as transfer printing, is especially well suited for curved or irregular surfaces. Our equipment can produce high resolution results on convex, concave, and flat caps as well as all lenses and most switch accessories. We can produce a variety of text and custom symbols. If a specific symbol or word is not available we can produce the cliché to accommodate almost any request that can physically fit on the product surface. Standard ink color is white, black is optional, and custom ink colors are available as special purchase options. Hot Stamp Hot stamping, while one of the oldest technologies, still offers a cost-effective permanent marking. A heated die, with the image to be marked, and a special foil (ribbon) are pressed onto a plastic surface, depositing the "ink" into the surface. Hot stamping is best suited for text, and low-resolution graphics. As the pigment is actually "melted" into the surface, it provides excellent durability, and good visual contrast. Yag Laser SoLiCo's most recent addition to our marking department is our YAG Laser. It is a high-power, high-speed unit with the ability to produce extremely highresolution graphics. It has a " x " stage, allowing multiple parts to be marked with a single set-up. Depending on the base material, it is suitable for direct imaging, or using an opaque overcoat, producing a reverse-image style of marking. Sorenson Lighted Controls, Inc. www.solico.com -8-7-789 (8) 7-9