General: Material: PVC-U Seal material: EPDM / FPM Ball seating joint: PTFE Dimensions: DN10 DN50 d16 d63 d3/8 d2 Connection types: Solvent socket DIN / ASTM / JIS Solvent spigot DIN Threaded socket BSP / NPT PE fusion spigot DIN PE fusion socket DIN Fixed flange DIN / ANSI / JIS SAFETY LOCKABLE HANDLE SYSTEM Operating pressure: PVC DN10 DN50 Technical features: PN16 Silicone free Buttress thread Safety locking handle (lock-out, tag-out) system Double axial gasket Floating ball Double sided blocked ball Adjustable ball seating joint Integrated fixations for bracket mounting Integrated bottom mounting stand Radial installation or removal Maintenance free Accessories: Clamping / spacing element Adapter set* Position feedback for ball valve hand and automatic operated* This document does not constitute a guarantee, it is for initial information purposes only. The product range is continually upgraded, the designs and types therefore only reflect the state of the art at the time of printing. Subject to technical modifications! www.praherplastics.com Page 1 of 6
Dimensions: PVC-U Connection types PVC Solvent socket / Solvent spigot / Threaded socket / Fixed flange PE Fusion spigot / Fusion socket DN 10 15 20 25 32 40 50 d 16 20 25 32 40 50 63 1 G TSO 3/8 1/2 3/4 1 1 1/4 1 1/2 2 A 1.77 1.77 2.11 2.13 2.44 3.07 3.43 B 1.55 1.55 2.01 2.01 2.50 2.88 3.31 C 1.30 1.30 1.57 1.69 2.01 2.20 2.52 D 2.19 2.19 2.44 2.76 3.31 3.98 4.53 E 0.22 0.22 0.22 0.26 0.26 0.26 0.26 F 1.34 1.34 1.42 1.50 1.57 1.77 1.97 H 2.78 2.78 3.03 3.13 3.89 4.15 4.49 I - 3.82 4.13 4.92 5.51 5.91 6.50 2 t SSO 0.63 0.65 0.77 0.91 1.04 1.24 1.52 3 t SSP 0.98 0.65 0.77 0.91 1.04 1.24 1.52 4 t FSP PE 0.51 0.55 0.61 0.73 0.59 1.14 1.22 5 t FSO PE 0.57 0.63 0.98 0.75 0.85 0.98 1.16 2 Z SSO 2.01 1.97 2.34 2.36 2.70 3.39 3.86 1 Z TSO 0.98 1.97 2.36 2.36 2.68 3.43 3.86 5 Z FSP PE 2.07 1.97 2.44 2.54 2.95 3.82 4.35 3 L SSP 3.86 4.86 5.65 6.04 6.83 7.62 8.80 4 L FSP PE 3.74 4.19 4.98 5.16 4.72 6.40 6.89 6 L1 FF - 5.12 5.91 6.30 7.09 7.87 9.06 PSI 235 235 235 235 235 235 235 1 TSO = Threaded socket 2 SSO = Solvent socket 3 SSP = Solvent spigot 4 FSP = Fusion spigot - = currently not available 5 FSO = Fusion socket 6 FF = Fixed flange Dimensions in inches www.praherplastics.com Page 2 of 6
Diagrams: Pressure Temperature Pressure loss Cv value table Pressure loss DN10 DN15 DN20 DN25 DN32 DN40 DN50 0,001 bar 6,2 7,1 12,6 19,9 28,4 67 94,2 1 bar 198 225 400 630 900 2120 3000 Specification in l/min (PN16 Pipe) Torque Flow characteristics Opening angle (%) www.praherplastics.com Page 3 of 6
Exploded drawing: 01. Labeling plate 02. Screw 03. Handle 04. Spring loaded locking sleeve 05. Stem O-Rings 06. Stem 07. Body 08. Seat Cushion 09. Teflon ball seat 10. Ball 11. Carrier O-Ring 12. Carrier 13. Face O-Ring 14. Connector types Solvent socket / - spigot Threaded socket Fusion socket /- spigot 15. Union nut www.praherplastics.com Page 4 of 6
2 ball valve M1 manually with Bottom mounting stand mounting possibilities: Assembly rail Plate Masonry / Concrete o Hanger screw and dowel required PLS Praher Labeling System Technical features: Clear and durable label Convenient marking by touch-up pen or laser engraving Standard version available with yellow plate; other colors available in red, blue and green Simple and easy to change Corrosion-resistant No effect on the function of the handle www.praherplastics.com Page 5 of 6
2 way ball valve M1 manual with Accessories Clamping / spacing element: Technical features: Using for fixing as: o Clamping element floors, walls, ceilings plate o Spacing element (screws additionally necessary) for flange connection Bore for threaded bush Bore for threaded bush Dimensions: Use as clamping element Use as spacing element DN 10 15 20 25 32 40 50 d 16 20 25 32 40 50 63 T 2.13 2.13 2.13 2.56 2.56 2.56 2.56 U 0.98 0.98 0.98 1.26 1.26 1.26 1.26 V 0.26 0.26 0.26 0.33 0.33 0.33 0.33 W 0.63 0.63 0.63 0.87 0.87 0.87 0.87 X 3.54 3.54 3.70 4.21 4.29 4.49 4.69 X1 2.76 2.76 2.76 3.35 3.35 3.35 3.35 Y 1.93 1.93 2.20 2.56 2.87 3.07 3.39 Dimensions in inches www.praherplastics.com Page 6 of 6