Trade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2

Similar documents
Trade of Toolmaking Module 1: Induction & Bench Fitting Unit 3: Drilling, Counterboring & Countersinking Phase 2

Trade of Toolmaking. Module 2: Turning Unit 8: Concentric Turning (4-jaw) Phase 2. Published by. Trade of Toolmaking Phase 2 Module 2 Unit 8

Trade of Toolmaking Module 1: Induction & Bench Fitting Unit 4: Hole Tapping Phase 2

Trade of Toolmaking Module 2: Turning Unit 1: Machine Controls and Operations Phase 2

Trade of Toolmaking. Module 5: Press Tools, Jigs & Fixtures, Mouldmaking Unit 2: Blanking Tool (Unguided) Phase 2. Published by

Trade of Toolmaking. Module 3: Milling Unit 6: Angle Slotting & Reaming Phase 2. Published by. Trade of Toolmaking Phase 2 Module 3 Unit 6

Trade of Toolmaking. Module 6: Introduction to CNC Unit 2: Part Programming Phase 2. Published by. Trade of Toolmaking Phase 2 Module 6 Unit 2

Trade of Toolmaking. Module 3: Milling Unit 9: Precision Vee Block Assembly Phase 2. Published by. Trade of Toolmaking Phase 2 Module 3 Unit 9

Trade of Toolmaking Phase 2 Module 4 Unit 6 Published by SOLAS 2014 Unit 6

Various other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple

Trade of Toolmaking. Module 5: Press Tools, Jigs & Fixtures, Mouldmaking Unit 6: Jig Components Phase 2. Published by

TRAINING MANUAL. Part 3 REAMERS

COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004

MACHINE TOOLS LAB LABORATORY MANUAL

Trade of Toolmaking. Module 5: Press Tools, Jigs & Fixtures, Mouldmaking Unit 5: Jigs and Fixtures Phase 2. Published by

Typical Parts Made with These Processes

Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY

Turning and Related Operations

Lathes. CADD SPHERE Place for innovation Introduction

TRAINING MANUAL. Part INTRODUCTION TO TWIST DRILLS

Turning and Lathe Basics

Workshop Practice (ME192)

Trade of Toolmaking Module 1: Induction & Bench Fitting Unit 8 Recessing and Assembling Parts Phase 2

TURNING BORING TURNING:

Review Label the Parts of the CNC Lathe

The new generation with system accessories. Made in Germany!

SAMPLE. MEM07005C Perform general machining. Learner guide. MEM05 Metal and Engineering Training Package. Version 1.1

Lathe. A Lathe. Photo by Curt Newton

Precision made in Germany. As per DIN The heart of a system, versatile and expandable.

ROOP LAL Unit-6 Drilling & Boring Mechanical Engineering Department

Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes

Introduction to Machining: Lathe Operation

Machining. Module 6: Lathe Setup and Operations. (Part 2) Curriculum Development Unit PREPARED BY. August 2013

Drilling. Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL.

LANDMARK UNIVERSITY, OMU-ARAN

SHERLINE Drill Chucks

Lathe Accessories. Work-holding, -supporting, and driving devices

Name: Machine Tool Technology ( )

ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS

Tooltech Precision Reamers are designed to meet hole geometry requirements in the complex and demanding machining environment of today s manufacturing

Trade of Toolmaking Module 1: Induction & Bench Fitting Unit 6: Filing Internal & External Radii Phase 2

Special reamers. Figure N 1 Reamer with descending cutting edges in carbide (Cerin)

Other Lathe Operations

Machining. Module 5: Lathe Setup and Operations. (Part 1) Curriculum Development Unit PREPARED BY. August 2013

Milling Machine Operations

HM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System

SAMPLE. MEM07005C Perform general machining. Learner guide. MEM05 Metal and Engineering Training Package. Version 1

The new generation with system accessories. Made in Germany!

TU-3008G - Opti-Turn Bench Lathe 300 x 700mm Turning Capacity Geared Head-Stock & Enclosed Gearbox

Grizzly Drill Press SOP

The new generation with system accessories. Made in Europe!

What Does A CNC Machining Center Do?

HM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm

March weeks. surcharge for

MACHINING PROCESSES: TURNING AND HOLE MAKING. Dr. Mohammad Abuhaiba 1

Solid Carbide Thread Milling Cutters

Reamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed

1. The Lathe. 1.1 Introduction. 1.2 Main parts of a lathe

ACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS

Back-Spotfacing. Flipcut For back-spotfacing and backor front-chamfering operations from one side, in one set-up. Back-Spotfacing. & Chamfering TOOLS

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side

TU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head

BD-405 MINI LATHE BD-712 METAL LATHE. Distance between centers Hole through spindle. Cross slide travel

TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head

Chapter 23. Machining Processes Used to Produce Round Shapes: Turning and Hole Making

ROOP LAL Unit-6 Lathe (Turning) Mechanical Engineering Department

Building a vertical wobbler

General advice on work safety

061 MECHANICAL ENGINEERING CRAFT PRACTICE

Chapter 23: Machining Processes: Turning and Hole Making

OPTIMUM TU-3008G. Opti-Turn Bench Lathe. 300 x 700mm Turning Capacity. Product Brochure

AL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Digital Readout & Cabinet Stand

TU-1503V - Opti-Turn Bench Lathe - Mini 150 x 300mm Turning Capacity Electronic Variable Speeds Ex GST Inc GST $ $908.50

Materials Removal Processes (Machining)

1640DCL Digital Control Lathe

Thread Mills. Solid Carbide Thread Milling Cutters

HM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm

Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations, Boring, Reaming, Tapping)

Cutting Speed, Feed, and Depth of Cut

AL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Cabinet Stand

Machinist NOA (2010) Subtask to Unit Comparison

HM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical

QLD Schools / TAFE - AL-356 Centre Lathe with Digital Readout - Includes Tooling Package 356 x 1000mm

Trade of Toolmaking. Module 5: Press Tools, Jigs & Fixtures, Mouldmaking Unit 7: Injection Moulds Phase 2. Published by

Precision & Heavy Duty Machining

HAFCO METALMASTER AL-960B. Centre Lathe. 305 x 925mm Turning Capacity. Product Brochure

Turning Operations. L a t h e

AL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity

WF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.

Metal Cutting Processes 1 - Turning

METRIC THREAD MILLS SINGLE PROFILE (SPTM) - SOLID CARBIDE. Scientific Cutting Tools, Inc. Q A C OAL 60º THREAD MILLS METRIC

Tool & Cutter Grinder

V-Turn 410/ PRECISION LATHE

PALO VERDE NUCLEAR GENERATING STATION

ME MANUFACTURING TECHNOLOGY LABORATORY-I VARUVAN VADIVELAN INSTITUTE OF TECHNOLOGY DHARMAPURI LAB MANUAL

Cross Peen Hammer. Introduction. Lesson Objectives. Assumptions

CNC EXPANDING MANDRELS

HAFCO METALMASTER HM-51. Turret Milling Machine. (X) 600mm (Y) 220mm (Z) 310mm. Product Brochure

TM-1960G - Centre Lathe 480 x 1500mm Turning Capacity - 80mm Spindle Bore Includes Digital Readout

HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand

Transcription:

Trade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2 Published by SOLAS 2014 Unit 3 1

Table of Contents Document Release History... 3 Unit Objective... 4 Introduction... 4 1.0 Drilling To Correct Spindle Speed And Feed Rate... 5 1.1 Drilling Of Core Diameters For Tapping (Tapping Size)... 5 2.0 Tapping Holes On A Lathe... 6 2.1 Use Of Zeus Chart Calculations For Tapping Sizes, Metric Threads... 6 2.2 Use Of Tap Wrench On Lathe Tailstock And Chuck Plus Accessories, Thread Cutting Fluids... 6 2.3 Sectional Views (Including Sectional Views Of Threads), End View, Symbols... 6 2.4 Centre Lathe Operations: Concentricity And Alignment... 7 3.0 Drilling And Reaming To Correct Spindle Speed And Feed Rate... 8 3.1 Calculation Of Machine Speeds And Feed Rate For Drilling And Reaming... 8 3.2 Drilling And Reaming Of Holes On The Centre Lathe, Using Parallel And Taper Shank Drills And Reamers... 9 3.3 Reaming Allowance Appropriate To Hole Size... 9 3.4 Use Of Coolants And Lubricants... 9 Summary... 10 Suggested Exercises... 11 Questions... 12 Answers... 13 Recommended Additional Resources... 14 Reference Books... 14 SOLAS 2014 Unit 3 2

Document Release History Date Version Comments 25/09/2014 2.0 SOLAS transfer SOLAS 2014 Unit 3 3

Unit Objective On completion of this unit you will be able to calculate the spindle speed for drilling, determine the correct tapping drill size and perform the tapping operation. You will also be able to drill and ream to the required size. Introduction Module two of this course covers turning. This is the third unit in module two and explains how to calculate the correct spindle speed for drilling on a lathe and the techniques associated with using the tailstock for drilling into the work piece to the required depth. This unit also explains how to determine the tapping hole size and how to perform the tapping operation on a lathe. Where a higher degree of accuracy and surface finish is required, reamers are used. This unit explains how to determine the drill size, the spindle speed and feed prior to reaming the hole to the required dimension. Tapping and reaming operations are performed throughout industry to allow mating components to be assembled accurately and securely. Operations explained in this unit are used for one off and low volume work, whereas for high volume requirements, CNC machines are generally used nowadays. Module 2 Turning Unit 1 Machine Controls Unit 2 Facing, Parallel & Step turning Unit 3 Drilling, Reaming & Tapping Unit 4 Taper Turning & Knurling Unit 5 Tool Grinding & Forming Unit 6 Recessing & Radiusing Unit 7 Boring & Parting Off Unit 8 Concentric Turning (4 Jaw) Unit 9 Screwcutting Unit 10 Turning & Assembling By the end of this unit you will be able to: Drill core (tapping size) diameters to depth using the correct spindle speed and feed rate. Tap holes on components while held in the lathe using the given tap wrench, taps and tailstock. Drill and ream to the required depths and diameters using the correct spindle speed and feed. SOLAS 2014 Unit 3 4

1.0 Drilling To Correct Spindle Speed And Feed Rate Key Learning Points Drilling of core diameters for tapping (tapping size). 1.1 Drilling Of Core Diameters For Tapping (Tapping Size) Cutting speed is expressed in meters per minute. This refers to the distance covered by the tool across the material when machining. A data chart is available listing various materials and their corresponding cutting speeds. The revolutions per minute (RPM) is calculated by entering the cutting speed and the diameter of the material into the RPM formula. The centre drill is held in the drill chuck, which in turn is held in the tailstock. It is important to use coolant and feed the center drill slowly into the work piece. Graduations on the side of the barrel can be used to drill to the required depth. A drill or a series of drills are then used to bore out the work piece to the required diameter. It is important to withdraw the drill frequently to remove swarf and allow coolant to enter the drill hole. Ref: Black, Bruce J 2004, Workshop processes, practices and materials, 3 rd edn, Elsevier Science & Technology, chapter 18, Drilling, p. 129. ISBN-13: 9780750660730 SOLAS 2014 Unit 3 5

2.0 Tapping Holes On A Lathe Key Learning Points Use of Zeus Chart calculations for tapping sizes, metric threads. Use of tap wrench on lathe tailstock and chuck plus accessories, thread cutting fluids. Sectional views (including sectional views of threads), end view, symbols. Centre lathe operations: concentricity and alignment. 2.1 Use Of Zeus Chart Calculations For Tapping Sizes, Metric Threads The Zeus Chart can be used to determine the tapping drill size prior the tapping the thread. If, for example, the drawing calls for a 6mm internal thread, then this will be shown on the drawing view as M6 x 1.0. This is a Ø6mm metric thread with a 1mm pitch. The pitch is the distance from the top of one thread to the next thread. The tapping drill size is the core diameter of an internal thread, which needs to be drilled prior to performing the tapping operation. The next step is to go to the metric thread section on the Zeus Chart, which will show the screw thread and pitch required and also the tapping drill size. Ref: Zeus Precision Charts Ltd. 2007, Zeus precision data charts and reference tables for drawing office, toolroom & workshop, 2007 edn, Zeus Precision Charts Ltd. ASIN: B0000CLZUO 2.2 Use Of Tap Wrench On Lathe Tailstock And Chuck Plus Accessories, Thread Cutting Fluids The tapered end of the tap allows the tap to be entered in to the pre-drilled hole and makes it easier to start the thread. It is important use a suitable lubricant on the tap. A tap handle is used to rotate the tap to cut the thread and the centre held in the tailstock will help to keep the tap centred. It is important to reverse and withdraw the tap frequently in order to clear out and break the metal chips. The above steps are repeated with the Plug and Finishing taps until the required hole is tapped. Ref: Black, Bruce J 2004, Workshop processes, practices and materials, 3 rd edn, Elsevier Science & Technology, chapter 2, Hand processes, p. 39. ISBN-13: 9780750660730 2.3 Sectional Views (Including Sectional Views Of Threads), End View, Symbols When a feature on a component is hidden or is inside the component and cannot be shown clearly on one of the projected views, then a sectioned view is taken through the part, showing the sectioned view at a right angle to the view. Ref: Simmons, Colin H & Maguire, Dennis E 2004, Manual of engineering drawing, 2 nd edn, Elsevier Science & Technology, chapter 8, Sections and sectional views, p. 64. ISBN-13: 9780750651202 SOLAS 2014 Unit 3 6

2.4 Centre Lathe Operations: Concentricity And Alignment For parts that require a number of different diameters that need to be concentric, then turning should be performed in one setting without removing the part from the chuck. If a part is removed from a chuck and put back in again, then accuracy is lost. If a part needs to be aligned accurately it can then setup in a 4-jaw chuck and a dial indicator is used to centre it. Ref: Black, Bruce J 2004, Workshop processes, practices and materials, 3 rd edn, Elsevier Science & Technology, chapter 9, Turning,, p. 151. ISBN-13: 9780750660730 SOLAS 2014 Unit 3 7

3.0 Drilling And Reaming To Correct Spindle Speed And Feed Rate Key Learning Points Calculation of machine speeds and feed rate for drilling and reaming. Drilling and reaming of holes on the centre lathe, using parallel and taper shank drills and reamers. Reaming allowance appropriate to hole size. Use of coolants and lubricants. 3.1 Calculation Of Machine Speeds And Feed Rate For Drilling And Reaming The correct spindle speed needs to be set for each cutter. This is calculated by entering the cutting speed and the cutter diameter into the RPM formula, where the Cutting Speed is expressed in meters per minute. Charts are available that recommend the correct cutting speed for a particular material, e.g. a typical cutting speed of 30 meters/min is used for mild steel and cutting speed is 20 metres/min is used for tool steel. Therefore the spindle speed will be lower for the tool steel when compared to that of mild steel. Recommended cutting speed in metres per minute: Drills Material High Speed Steel Carbide Cutter (metres/min) (metres/min) Tool Steel 21-33 68 158 Mild Steel 33 42 98 188 Cast Iron 21 30 68 98 Brass 42 75 120 180 Aluminium 60 105 180-350 Plastic 60-450 unlimited To find the correct RPM (revs per minute) setting of the spindle the following formula should be used; RPM = Cutting Speeds in metres per minute x 1000 Circumference of cutter in millimetres = S x 1000 л x D For example, for a mild steel part a cutting speed of 30 m/min is chosen from the above table. If it is to be machined with a 20mm High Speed Steel Drill, the RPM is calculated as follows: RPM = 30 x 1000 = 478 3.14 x 20 SOLAS 2014 Unit 3 8

Feed Rate Feed rate is the speed at which the workpiece is moved relative to the cutter. A value of 0.05 is chosen from the manufacturers tables. The feed rate is calculated as follows: Feed Rate Reamers = feed/tooth x No. of cutting teeth x RPM = 0.05 x 2 x 478 = 48 mm/min When using reamers use half the speed of a corresponding size drill and double the feed rate. 3.2 Drilling And Reaming Of Holes On The Centre Lathe, Using Parallel And Taper Shank Drills And Reamers Drills and reamers are available with straight shank and taper shanks. The straight shank is held in a drill chuck. The chuck is fitted with a Morse tapered shank, which fits into a corresponding morse taper in the spindle of the tailstock. A tapered drill shank can be fitted directly into the tapered spindle of the tailstock. To remove the Morse tapered shank the quill is wound back with the feed handle until tang at the top of the tapered shank hits the back of the tailstock, which caused the tapers to disengage. Ref: Black, Bruce J 2004, Workshop processes, practices and materials, 3 rd edn, Elsevier Science & Technology, chapter 8, Drilling, p. 131. ISBN-13: 9780750660730 3.3 Reaming Allowance Appropriate To Hole Size The purpose of a reamer is to produce a hole of high accuracy and to a good finish. The holes are drilled to a diameter, which is slightly less then the finished dimension required, e.g. for up to Ø10mm holes the amount of stock that needs to be removed by the reamer is approximately 0.3mm. 3.4 Use Of Coolants And Lubricants When the component is being drilled, heat will be generated at the cutting edge, due to frictional forces. This can be avoided by using coolant which cools and lubricates the work and drill. The advantages of coolant are: reduced wear on the drill, drilling speeds and feeds can be increased and a better surface finish is produced. Ref: Black, Bruce J 2004, Workshop processes, practices and materials, 3 rd edn, Elsevier Science & Technology, chapter 7, Cutting tools and cutting fluids, p. 124. ISBN-13: 9780750660730 SOLAS 2014 Unit 3 9

Summary Drilling to correct spindle speed and feed rate: Cutting speed is expressed in feet per minute or meters per minute. This refers to the distance covered by the tool across the material when machining. A chart is available listing various materials and their corresponding cutting speeds. The revolutions per minute (RPM) is calculated by entering the cutting speed and the diameter of the material into the RPM formula. The centre drill is held in the drill chuck, which in turn is held in the tailstock. It is important to use coolant and feed the center drill slowly into the work piece. Graduations on the side of the barrel can be used to drill to the required depth. A drill or a series of drills are then used to bore out the work piece to the required diameter. It is important to withdraw the drill frequently to remove swarf and allow coolant to enter the drill hole. Tapping holes on a lathe: The Zeus Chart can be used to determine the tapping drill size prior the tapping the thread. If, for example, the drawing calls for a 6mm internal thread, then this will be shown on the drawing view as M6 x 1.0. This means that is a Ø6mm metric thread with a 1mm pitch. The pitch is the distance from the top of one thread to the next thread. The tapping drill size is the core diameter of an internal thread, which needs to be drilled prior to performing the tapping operation. The next step is to go to the metric thread section on the Zeus Chart, which will show the screw thread and pitch required and also the tapping drill size. The tapered end of the tap allows the tap to be entered in to the pre-drilled hole and makes it easier to start the thread. It is important use a suitable lubricant on the tap. A tap handle is used to rotate the tap to cut the thread and the centre held in the tailstock will help to keep the tap centred. It is important to reverse and withdraw the tap frequently in order to clear out and break the metal chips. The above steps are repeated with the Plug and Finishing taps until the required hole is tapped. Drilling and reaming to correct spindle speed and feed rate: A reamer is used to produce a hole to a higher degree of accuracy and surface finish than that can be produced by a drill. It is used for enlarging and finishing to size after a hole has been drilled. The recommended amount of stock that a reamer can remove is 0.3 to 0.5mm depending on the size of the hole being reamed. The calculation for spindle speeds for drilling has been explained above. For reaming, a general rule is to reduce the speed by at least a half and double the feed rate to that of a similar size drill. The reamer normally has a taper shank and is held in the tapered bore of the tailstock. The reamer is fed into the drilled hole using coolant. SOLAS 2014 Unit 3 10

Suggested Exercises 1. Setup a mild steel bar in the chuck and drill an Ø8mm hole, use the RPM formula to calculate the correct spindle speed. 2. Drill the Ø8mm hole to a depth of 35mm, using the graduations on the tailstock. 3. Setup a mild steel bar in the chuck and drill a tapping hole for an M8 thread. Use the Zeus book to determine the tapping drill size. 4. Tap the workpiece using an M8 set of taps and a tap wrench. 5. What size hole is drilled when a Ø8mm reamer is being used. Also calculate the spindle speed for both the drill and the reamer. SOLAS 2014 Unit 3 11

Questions 1. Use the Zeus Book to determine the tapping drill size for an M6 screw thread. 2. What type of shanks do drills and reamers have? 3. Explain how drills and reamers are held when machining. 4. What are the advantages of using coolant when drilling and reaming? 5. Explain how to tap a threaded hole on a lathe using the tailstock centre. SOLAS 2014 Unit 3 12

Answers 1. The tapping drill size for an M6 screw thread is Ø5.0mm (see Zeus Book). 2. Drills and reamers are available with straight shank and taper shanks. 3. The straight shank is held in a drill chuck. The chuck has a Morse tapered shank, which fits into a corresponding Morse taper in the spindle of the tailstock. A tapered drill shank can be fitted directly into the tapered spindle of the tailstock. For smaller drills, Morse tapered sleeves may need to be used. 4. When the component is being drilled, heat will be generated at the cutting edge, due to frictional forces. This can be avoided by using coolant which cools and lubricates the work and drill. The advantages of coolant are: reduced wear on the drill, drilling speeds and feeds can be increased and a better surface finish is produced. 5. A suitable lubricant should be used when tapping screw threads. The tapered tap is assembled first with the tapping handle, which is used to rotate the tap to cut the thread. The tailstock centre is aligned with the centre hole at the back of the tap, which will help to keep the tap centred. It is important to reverse and withdraw the tap frequently in order to clear out and break the metal chips. The above steps are repeated with the Plug and Finishing taps until the required hole is tapped. SOLAS 2014 Unit 3 13

Recommended Additional Resources Reference Books Black, Bruce J 2004, Workshop processes, practices and materials, 3 rd edn, Elsevier Science & Technology. ISBN-13: 9780750660730 Simmons, Colin H & Maguire, Dennis E 2004, Manual of engineering drawing, 2 nd edn, Elsevier Science & Technology. ISBN-13: 9780750651202 Bird, John 2005, Basic engineering mathematics, 4 th edn, Elsevier Science & Technology. ISBN-13: 9780750665759 Zeus Precision Charts Ltd. 2007, Zeus precision data charts and reference tables for drawing office, toolroom & workshop, 2007 edn, Zeus Precision Charts Ltd. ASIN: B0000CLZUO SOLAS 2014 Unit 3 14