Item #1000 683 163 Model #L-GZ669PST-I USE AND CARE GUIDE BRAMFORD GAZEBO Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-877-527-0313 WWW.HOMEDEPOT.CA THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this gazebo. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!
Table of Contents Table of Contents... 2 Safety Information... 2 Warranty... 2 What is Covered... 2 What is Not Covered... 2 Pre-Assembly... 3 Planning Assembly... 3 Hardware Included... 3 Package Contents... 4-5 Assembly... 6-9 Care and Cleaning... 10 Safety Information 1. Some parts may contain sharp edges. Wear protective gloves. 2. When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Please read all instructions before assembly and usage. DANGER: This unit is heavy! Do not assemble this item alone. WARNING: Do not leave the gazebo assemble when there is a risk of high wind, as possible damage will occur to the structure. CAUTION: Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury, possibly even death. NOTICE: For outdoor use only. Warranty 2 YEARS WARRANTY WHAT IS COVERED This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the item is maintained with care and used only for personal, residential purposes. The item is warranted to be free from defects in material or workmanship for a period of 2 years. WHAT IS NOT COVERED We don t reimburse for transportation of delivery costs, or compensate the individual or any outside party for assembling or disassembling the product. Contact the Customer Service Team at 1-877-527-0313 or visit www.homedepot.ca. 2
Pre-Assembly PLANNING ASSEMBLY Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA BB CC DD EE FF GG HH Part Description Quantity AA M6 X 15 Bolt 110 BB M6 Flat washer 158 CC M6 X 15 Screw 30 DD M6 X 25 Bolt 16 EE Dia.8 X 180 Stake 16 FF M6 X 35 Screw 2 GG Ring 52 HH M6 Hex key 2 3 WWW.HOMEDEPOT.CA Please contact 1-877-527-0313 for further assistance.
Pre-Assembly (continued) PACKAGE CONTENTS A K1 K2 B K3 K4 C K5 D1 L1 D2 L2 E1 M1 E2 M2 M3 F M4 G M5 H N1 I N2 J N3 4
O1 R S O2 T P U Q Part Description Quantity A Post 4 B Stake flake 4 C Stake cover 4 D1 Screen 1 2 D2 Screen 2 2 E1 Corner screen 1 2 E2 Corner screen 2 2 F Beam lower connector 4 G Middle beam connector 6 H Top frame 2 I Beam 4 J Middle beam 6 K1 PC board 1 4 K2 PC board 2 4 K3 PC board 3 4 K4 PC board 4 4 K5 Middle PC board 4 L1 Long PC board 2 L2 Short PC board 2 V Part Description Quantity M1 F-shape panel 1 4 M2 F-shape panel 2 4 M3 F-shape panel 3 2 M4 F-shape panel 4 2 M5 F-shape panel 5 2 N1 Left word card slot 4 N2 Right word card slot 4 N3 Middle word card slot 2 O1 Middle panel 6 O2 Corner panel 8 P Hook 1 Q Small top connector 1 R Small roof cover 1 S Small roof beam 4 T Long netting tube 4 U Short netting tube 4 V Mosquito netting 1 5 WWW.HOMEDEPOT.CA Please contact 1-877-527-0313 for further assistance.
Assembly 1 Assembling the screen 2 Insert the screen 1 (D1) into the corner screens (E1 and E2) and secure them using bolts (AA) and flat washers (BB). Repeat for the other screen 1 (D) and corner screens (E1 and E2). Insert the screen 2 (D2) into the corner screens (E1 and E2) and secure them using bolts (AA) and flat washers (BB). Repeat for the other screen 2 (D2) and corner screens (E1 and E2). Assembling the beam connector Secure the beam lower connectors (F) to the corner screens (E1 and E2) using bolts (AA) and flat washers (BB). Secure the middle beam connectors (G) to the screens (D1 and D2) using bolts (AA) and flat washers (BB). 3 Assembling the netting beam 4 Assembling the top frame Secure the long netting tube (T) to the post 1 (D1) and corner screen E using bolts (AA) and flat washer (BB). (Use the same way to assemble short netting tube (U) to screen 2 (D2) and corner screen (E)). Connect the two top frames (H) together using bolts (AA) and flat washers (BB). Secure the beams (I) to the top frames (H) using bolts (AA) and flat washers (BB). 6
Assembly (continued) 5 Assembling the beam 6 Connecting the middle beam Secure the beams (I) to the beam lower connectors (F) using bolts (AA) and flat washers (BB). Secure the upper end of middle beams (J) to the top frames (H) using bolts (AA) and flat washers (BB). Secure the lower end of the middle beams (J) to the middle beam connectors (G) using bolts (AA) and flat washers (BB). 7 Assembling the top 8 Assembling the PC board Secure the small roof beams (S) to the top frames (H) using blots (AA) and flat washers (BB). Secure the small roof beams (S) to the small top connector (Q) using bolts (AA) and flat washers (BB). Install the hook (P) to small top connector (Q). Insert the long PC boards (L1) and short PC boards (L2) to the slot of the small roof beams (S). 7 WWW.HOMEDEPOT.CA Please contact 1-877-527-0313 for further assistance.
Assembly (continued) 9 Assembling the F-shape panels Attach the F-shape panels 4 (M4) and F-shape panels 5 (M5) to the PC boards (L1 & L2). Then secure them to the small roof beams (S) through the three holes using the corner panels (02), screws (CC), and flat washers (BB). 10 Assembling the roof cover Using screws (FF) and flat washers (BB) to secure the small roof cover (R) to the small roof connector (Q). 11 Assembling the PC boards 12 Insert the PC boards K3 (K4) into the middle beams (J) and beams (I). Then insert the left word card slots (N1). Insert the PC boards K1 (K2) into middle beams (J) and beams (I). Assembling the middle PC boards Insert the middle PC boards (K5) into the middle beams (J), then insert the middle word card slots (N3). Insert the middle PC boards (K5) into beams (J). 8
Assembly (continued) 13 Assembling the F-shape panel Assemble the F-shape panels 1 (M1), F-shape panels 2 (M2) and F-shape panels 3 (M3) to the PC boards (K1, K2 and K3). Then secure the middle panels (01) to the middle beams (J) through three holes using screws (CC) and flat washers (BB). 14 Assembling the panel Attach the corner panels (02) using screws (CC) and flat washers (BB) through three holes to the beams (I). 15 Installing the post 16 Install the stake cover (C) to the post (A) and secure the stake flakes (B) and posts (A) using screws (CC) and flat washers (BB). Insert the post (A) into the corner screens (E) and secure them using screws (DD) and flat washers (BB). Securing gazebo Use the rings (GG) to attach the mosquito netting to the long netting tubes (T) and short netting tubes (U). Lift the stake covers (C) and secure the assembled gazebo using stakes (EE). 9 WWW.HOMEDEPOT.CA Please contact 1-877-527-0313 for further assistance.
Care and Cleaning Before using, clean the gazebo completely with a soft dry towel. Do not put your gazebo in wet conditions where there is a risk of rust developing. When not in use, store in a cool, dry area. 10
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-877-527-0313 WWW.HOMEDEPOT.CA Retain this manual for future use.