DER USTOMER Thank you for purchasing your new piece of furniture from Dunelm. We put a lot of effort in the design and construction of our products to ensure they set the standard for quality, durability and ease of assembly. If for any reason you feel we haven t lived up to the high standards we set ourselves, please don t hesitate in contacting us on 0345156565 where our team will be very keen to understand what has gone wrong and, more importantly, put it right. DER USTOMER The next step There is no need to feel daunted by the number of parts and fittings in front of you, we have compiled this straight forward, step-by-step guide to make sure that assembling your furniture is as easy as 1, 2, 3. efore you begin, we advise that you check that you have everything you need to get started. TOP TIP ind a space to spread these out across the floor before you begin assembling them. Lay each panel down in position, ready to build. It is recommended that two people assemble this product together. The full list of furniture parts, fixtures and fittings, as well as the tools you will need for assembly, can be found on page 2 and 3 of this manual. TOP TIP Identify all of the fittings, make sure that you have them all prepared and familiarise yourself with each component, to make things easier when you are putting it all together. Safety and are dvice IMPORTNT - The first step you need to take is to ensure your safety! Please take the time to read and understand these instructions before assembling your furniture. Keep children and animals away from the assembly area. This furniture contains small parts that could cause choking if swallowed. Keep all plastic wrapping materials way from children to avoid danger of suffocation. Ensure that all packaging is disposed of carefully and responsibly. Make sure that you allow enough space to move around when assembling your furniture.
ETON TELEPHONE TLE - 30244493 480 380 780 2
Parts & ittings for the ENTON TELEPHONE TLE - 30244493 Panel - exploded view 01 12 11 07 07 06 03 05 02 04 10 09 08 16 15 14 14 13 3
Panels - plan view 1 Top 480 x 380mm 4 ase 356x323mm 2 Left Upright 328 x 752mm 3 Right Upright 328 x 752mm 5 Shelf 924x271mm 6 ront plinth 7 Drawer uide 352x40mm 330x53mm 8 ront plinth 272x60mm 9 Left Upright 75 x 752mm 10 Right Upright 75 x 752mm 11 ack 960x412mm 12 Upper rossbeam 272x25mm 13 ront Drawer 1186x250mm 14 Side Drawer 330x152mm 15 ack 318x250mm 16 ack Drawer 238x152mm 24
ittings 8X30mm Wooden dowel x 34 Trapeze x 15 30mm screw x 30 3,5X16mm screw x 02 D E up Handle x 01 H Panel pins x 18 3,0X30mm screw x 08 4,0X16mm screw x02 I Wall ttachment Device x01 Tools required efore you start heck the pack and make sure you have all the parts listed above. If not, contact the helpline on 0345 1656565 who will be able to help you. When you are ready and sure that you have the right tools to hand, you will need plenty of space and a clean dry area for assembly. Ready? ollow this step-by-step guide ross slot screwdriver Hammer Tape measure The use of power tools to assemble the product is not recommended due to the risk of over tightening fixings 1 10 mm 12 07 (2x) 05 04 08 8X30mm Wooden dowel x 20 Trapeze x05 5
2 03 02 10 mm 8X30mm Wooden dowel x 12 Trapeze x 10 3 10 03 09 02 30mm screw x 06 6
4 08 03 05 04 30mm screw x 05 5 02 30mm screw x 06 7
6 12 01 30mm screw x 02 7 01 30mm screw x 04 8
8 07 07 30mm screw x 04 9 06 30mm screw x 02 9
10 11 Panel pins x 18 11 14 16 14 15 13 E D D E D D E 3,0X30mm screw x 08 3,5X16mm screw x02 up Handle x 01 10
12 8 8X30mm Wooden dowel x 02 12 I H H H 4,0X16mm screw x02 I Wall ttachment Device x01 11
12
Product information eing a natural product, each piece of wood will be unique in shape, grain-structure, colour irregularities and the presence of various sizes of knots are the natural results of the growth of the trees. Therefore, variations in colour, grain-pattern and appearance should be expected as part of the individual characteristics of this furniture. Knotting is the most common of markings and is the fingerprint of nature wood. These vary in size and occur frequently in natural wood products. The enton range has a manufactured rough sawn finish technique to give a rustic and raw uniqueness no two pieces will be the same. These features include: are lean the product with a soft, clean, damp cloth, then buff with a clean, dry cloth. Do not scrub the surface when cleaning, clean gently. Do not use abrasive cleaning products or those containing silicone. ny spills should be removed immediately with a soft, clean, damp cloth and dried. Ensure the product is protected with mats and coasters when items are placed on the surface, to prevent scratching or damage. Do not put hot dishes directly onto the surface of the product. void keeping furniture in direct sunlight or close to any heat sources, as this can cause cracking, discolouration or warping. Never drag pieces of furniture across the floor, as this will cause damage to the joints. ll assembly fixings should be tightened properly and be checked periodically and tightened if necessary. This product should not be discarded with household waste. Take to your local authority waste disposal centre. inally, we hope you enjoy your furniture for many years to come and thanks again for your purchase. dunelm.com dunelm.com 13