[R] Installation TopFi / RecessFi [R] the packaging! Fitting screws: Use a size- screwdriver (PO- WRNING /00 0-90 cm 90-80 cm 80-70 cm 70-00 cm ma. 80 cm 7 Installation - - 0-0-0 djust control height.m For installation height from.m, the tassel must be at least.m from the oor. o adjust the tassel height, push the tassel cap up the cord and tie a knot on the required height. Then cut the cord under the knot and click the enclosed transparent part of the For installation height on/ below.m, the operation cord length is ma cm. To adjust the operation cord length, push the tassel cap up to the headrail. Tie a knot as cord under the knot and click the enclosed transparent part of the To raise the shade -
[F] FaceFi installation to a window frame / wall [F] the packaging! Fitting screws: Use a size- screwdriver (PO- WRNING /00 0-90 cm 90-80 cm 80-70 cm 70-00 cm ma. 80 cm 7 Installation - - 09-0-0 djust control height.m For installation height from.m, the tassel must be at least.m from the oor. To adjust the tassel height, push the tassel cap up the cord and tie a knot on the required height. Then cut the cord under the knot and click the enclosed transparent part of the For installation height on/ below.m, the operation cord length is ma cm. To adjust the operation cord length, push the tassel cap up to the headrail. Tie a knot as cord under the knot and click the enclosed transparent part of the To raise the shade - 7
[R] Installation TopFi / RecessFi [R] the packaging! Fitting screws: Use a size- screwdriver (PO- WRNING /00 0-90 cm 90-80 cm 80-70 cm 70-00 cm ma. 80 cm 7 Do not raise bottomrail higher than the midrail to avoid a hazardous loop. djust control height For installation height from.m, the tassel must be at least.m height, push the tassel cap up the cord and tie a knot on the required height. Then cut the - To raise the shade -C 0-0-0.m Installation For installation height on/below.m, the operation cord length is ma cm. To adjust the operation - -
[F] FaceFi installation to a window frame / wall [F] the packaging! Fitting screws: Use a size- screwdriver (PO- WRNING /00 0-90 cm 90-80 cm 80-70 cm 70-00 cm 7 7 ma. 80 cm 7 Do not raise bottomrail higher than the midrail to avoid a hazardous loop. 09-0-0 Installation djust control height.m For installation height from.m, the tassel must be at least.m height, push the tassel cap up the cord and tie a knot on the required height. Then cut the cord under the knot and click the enclosed transparent part of the tassel on the cap. For installation height on/below.m, the operation cord length is ma cm. To adjust the operation To raise the shade - -C - -
Installation TopFi / RecessFi [R] the packaging! Fitting screws: Use a size- screwdriver (PO- WRNING /00 /0 [R] 0-90 cm 90-80 cm 80-70 cm 70-00 cm ma. 80 cm 7 djust control height For installation height from.m, the tassel must be at least.m height, push the tassel cap up the cord and tie a knot on the required height. Then cut the - To raise the shade -C 0--0.m Installation For installation height on/below.m, the operation cord length is ma cm. To adjust the operation - - 0