Great new promotions on the Fluke multifunction installation testers! Specials Spring - Summer 2018 NEW electrical testers T6 See more inside!
The NEW Fluke T6 Electrical Testers with FieldSense technology Measure voltage without test leads Now measure voltage the same way you measure current, without test lead contact to live voltage. FieldSense technology lets you slide the open fork over a conductor and see the voltage level.1 NEW Be safer - Measure voltage to 1000 V ac through the open fork, without test leads. Be faster - No need to open covers or remove wire nuts. Be more efficient - Simultaneously measure voltage and current. Be everywhere - 17.8 mm open fork is widest in the industry; measure up to 200 A on 120 mm 2 wires. 1 Requires capacitive path to ground, provided through user in most applications. Ground connection via test lead may be required in some situations. Differentiating features T5-600 T5-1000 T6-600 T6-1000 PRV240FS* FieldSense Technology Voltage ac NEW 16 to 600 V 16 to 1000 V Voltage ac/dc 1 to 600 V 1 to 1000 V 1 to 600 V 1 to 1000 V Source NCV: 240 V ac Source contact: 240 V ac, dc Current range ac expanded NEW 0.1 to 100 A 0.1 to 100 A 0.1 to 200 A 0.1 to 200 A True-rms NEW Resistance 1000 Ω 1000 Ω 2000 Ω 100 kω Continuity < 25 Ω NEW TPAK compatible NEW Backlight display NEW Fork opening NEW 12.9 mm 12.9 mm 17.8 mm 17.8 mm Single display volt or amps (toggle) Dual display volts and amps NEW Frequency measurement NEW 45-66Hz Measurement category CAT III 600 V CAT III 1000 V / CAT IV 600 V CAT III 600 V CAT III 1000 V / CAT IV 600 V Price 137 147 167 219 119 * This device provides a fast, safe and reliable sourcing method to verify that your electrical test tool is operating properly before you conduct any live tests. How does FieldSense Technology work? Measure a voltage signal in reference to earth via the hand of the user by a capacitive sensor without any electrical contact or galvanic connection, fully isolated! The sensor area of the tester should be located close to the measured signal on a live conductor. In this case the hand and body of the user provides a connection to earth. The electrical field (voltage) and also the magnetic field (current) is picked up. When there is a missing earth connection an earth symbol in the display of the T6 shows up. In some cases test leads have to be used: When the hand or the human body is isolated to earth (e.g. safety gloves) or if the human body has no earth reference (e.g. upper floors in wooden houses) the earth reference must be provided by connecting the black test lead (COM) to earth.
In it for the long term Fluke s first years Keeping your world up and running. Ever since our first meter in 1948, Fluke technologies have helped shape the nature of electrical testing and troubleshooting. Our instruments are in the toolboxes of professionals across the world people who stake their reputations on their measurements. Seventy years innovation have established our reputation for rugged, safe, easy to use and top quality portable tools: Digital multimeters and clamp meters our workhorse instruments We re still innovating in our core market-dmm s and clamp meters for electricians. The Fluke 279 FC fullfeatured digital multimeter integrates a thermal imager so you can see what s wrong from a safe distance, and then measure it. The DMM combines neatly with our iflex flexible current clamp to measure currents in tight, hard-to-reach spaces. Thermal imagers making faults instantly visible One of the most productive of all energy efficiency actions is to walk through a building or process with a thermal imager. We pioneered IR-Fusion, which helps instantly spot the location of faults. They virtually jump out at you on the imager's screen. Power quality analyzers eliminate power disturbances Our 43x Series II is the world's only Power Quality analyzer that can monetize the cost of energy waste due to poor power quality. And we have analyzers combining: clamp meter oscilloscope, and data logger. Laser Levels green for highest visibility We re innovating in new industries like construction, utilities, oil and gas and data centers too. In construction, conventional laser levels use red laser traces, but the human eye is most sensitive to green light. Our green laser has the clearest beams in the construction industry. It also maintains calibration specifications even after a 1 meter drop. Electrical testers measure voltage and current in a single step Another innovation: our latest T6 Electrical Testers save a complete step by measuring voltage and current at the same time. They sense an electrical field in the open fork so you can examine equipment quickly and safely. Fluke Connect pulling it all together Many instruments like our 1664 FC Multifunction Installation Tester now include Fluke Connect, which lets you save equipment measurements to the cloud in a single step. You can trend and monitor intermittent problems, and share them using video calls and e-mails. Education and training We are always looking for ways to help you increase your skills with: training videos seminars and webinars downloadable virtual demos a test-guide app to guide you through common electrical measurements, and Fluke Academy. Support And we have dedicated Solution Centers to help you improve your energy efficiency, preventive maintenance and safety procedures. All to keep your world up and running. 1979 1982 1988 1991 1993 1997 1998 2000 2003 2004 2009 2011 2013 2015 2016 70 Years of innovation
Rugged Fluke tools give fast, reliable results on construction sites In demanding and often dangerous construction site environments, you need high-quality, rugged and reliable tools. Whether you re an electrician, HVAC engineer, surveyor, roofer, bricklayer, plumber or inspector, Fluke will help you get the job done accurately and on time. Check out our special construction tools Fluke 180LG Cross line laser level Save time and hassle: less than 1 second to stabilize Only tool on the market with true 180 beams Also available in red (Fluke 180LR) PLS-20513 Tripod Adjustable design for interior work Levelling bullseye and inter-locking legs Thermal imaging basics for building inspections Thermal imagers are feature-rich and essential tools for electricians, HVAC engineers, roofers (to check insulation), plumbers and inspectors Special price 180LG 266 PLS-20513 154 FLK-TiS20 9Hz From 1295 now for 1229 Whatever your specialization, we can measure it. Go to www.fluke.co.uk/construction for more information Which Fluke clamp meter is right for you? Fluke clamp meters offer flexibility and user friendliness with easy to use products and large display screens. Fluke digital clamp meters come in a wide variety of models. Ranging from small bodied to the more robust and rugged series for industrial and utility applications. Try our selector tool and get: Advice in less than four simple steps Top related products Highlighted key features How-to-videos Get your free advice now... Go to www.fluke.co.uk/clamps for more information
Special promotions with Fluke Multifunction Installation Tester Kits The 1664FC is the only installation tester that helps prevent damage to connected appliances and allows users to send test results wirelessly via smartphone directly in the field. Fluke 1662 The Fluke 1662 gives you Fluke reliability, simple operation and all the testing power you need for day-in, day-out installation testing. New limited edition kits from Fluke... Installation Tester plus software and Two Pole Tester free! Fluke 1663 The ideal tester for professional users, high-end functionality, advanced measurements Fluke 1664FC Protect appliances, share results wirelessly, perform 7 tests with 1 touch 1662 830 Fluke 1663 + FREE T130 + FREE DMS Software 1663 UK-TPL KIT 1195 Fluke 1664 FC + FREE T150 + FREE DMS Software 1664 UK-TPL KIT 1345 Features 1662 1663 1664 FC Insulation PreTest safety function Fluke Connect compatibility ShareLive calling, FlukeCloud storage Auto Test sequence Insulation and Continuity at L-N, L-PE, N-PE inputs -/ / Z Max memory Voltage True-rms (ac and dc) and frequency On/Off switchable Auto-Start for RCD and Looptest Heavy duty mains cord with single input connector Price 830 1195 1345 Fluke digital multimeters - when Uptime matters Fluke 113 Basic Electrical Multimeter with VCHEK 113 109 Fluke 114 Electrical Multimeter 114 145 Fluke 115 Field Service Testing Multimeter 115 169 Fluke 116 HVAC Multimeter with Temperature and microamp 116 195 Fluke 117 Electricians Multimeter with non contact Voltage 117 199
Fluke: A solution for every application Fluke TiS20 Infrared Camera Finding hotspots in electrical installations and photovoltaic systems IR-Fusion visual and infrared details all in one Email and share images in real time with Fluke Connect special price 1229 Fluke 368 FC True-rms Leakage Current Clamp Meter Find leakage currents without taking equipment offline Large, 40 mm jaw opening Highest resolution of 1 μa, measure up to 60 A Selectable filter function removes unwanted noise 566 Fluke T150 Voltage and Continuity Tester For testing presence and absence of voltage according to IEC-EN 61243 and testing connections for breaks. A LED indicator, a bright digital display of the measurement value, an audible continuity test, and vibration to give tactile feedback RCD functionality See our promo kits on page 5 125 Fluke 180LR Cross Line Laser Level Self-leveling 2-line laser levels help establish reference points fast, accurate, reliable Rugged design withstands rough handling on the job site; drop tested at 1 meter Self-leveling, horizontal and vertical-cross line laser level for rapid, accurate leveling and layout Accurate to 3 mm at 10 meters Fluke 325 True-rms Clamp Meter The best general troubleshooting tools for commercial and residential electricans. True-rms ac/dc voltage and current for accurate measurements Current measurement up to 400 A ac/dc and voltage measurements up to 600 V ac/dc Resistance measurement to up to 40 k Ω with continuity 215 176
Fluke 1587 FC Insulation Multimeter The high-performance 2-in-1 insulation DMM, combines a digital insulation tester with a full-featured, true-rms digital multimeter. PI/DAR timed ratio tests with TrendIt graphs Insulation test (1587 FC: 0.01 MΩ to 2 GΩ) AC/DC voltage, DC millivolts, ac/dc milliamps, Resistance (Ω), Continuity Capacitance, diode test, temperature, Min/Max, frequency (Hz) 587 Fluke T6-1000 Electrical Tester Measure voltage without test leads FieldSense Technology Voltage ac Dual display Volts AND Amps at the same time True-rms NEW 219 Fluke 279FC True-rms Thermal Multimeter Finding hotspots in heating systems and electrical installations Full-featured digital multimeter with integrated thermal imaging iflex and Fluke Connect functionality 839 Fluke 1664 FC Multifunction Installation Tester Fluke 3000 FC True-rms Wireless Multimeter Complete electrical installation commissioning and troubleshooting Reduce the risk of arc flash and stay safe Reduce test time up to 40 % with Auto Test Sequence Insulation PreTest Fluke Connect : share test results from your smartphone See our promokits on page 5 1345 Display the meter measurement, plus readings from up to three wireless modules Mix and match modules to suit your unique measurement needs. 243
The Fluke 64 MAX IR Thermometer Takes the heat, the dust and water and a 3 meter drop. And now, internal memory and unattended monitoring. Precise laser technology for more accurate and repeatable measurements Temperature accuracy of up to ± 1 C or ±1% of reading whichever is greater with 20:1 distance to spot ratio 99 Data point logging 30 Hour battery life, so your tool can perform as long as you need it to 64 MAX 109 Promotion! Rugged, high-quality testers for fast test results the way you need them. Buy a T150 electrical tester and get a H15 holster for FREE! Save 16% FLUKE-T150/H15 125 Promotion! Safety bundle consisting of Fluke 115 Digital Multimeter and Fluke TLK-225 SureGrip Master Accessory set. Save 42 % Fluke 6200-2 and 6500-2 Portable Appliance Testers Perform more tests each day! Low weight, small size, onetouch solutions. RCD test 250 V insulation test 110 V test functionality Save time: pre-set pass/fail levels and auto-test sequences FLK-115/TLK-225-1 172 6200-2 997 6500-2 1420 features vary by model Two-pole voltage and continuity testers They give you the best combination of safety, ease-of-use and fast answers available anywhere T90 T110 T130 T150 Display LED LED LED/LCD LED/LCD Current/Voltage AC/DC 12 V-690 V 12 V-690 V 6 V-690 V 6-690 V Other LoZ* LoZ* LoZ*/Ω Price 49 69 103 125 * Low input impedance or switchable load. Look for more details on Fluke products and special promotions at www.fluke.co.uk/promotions All prices in this leaflet are recommended resale prices only and exclude VAT. 2018 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All actions are valid until 30.06.2018. Issue Spring/Summer 2018. Printed in the Netherlands. 6009898-uken