M-6 CORE BORE DRILLING MACHINE PARTS LIST September 8, 0 Part # 8008
Proposition 6 State of California Warning! Engine exhaust and some its constituents are known to the State of California to cause cancer, birth defects, and/or other reproductive harm. Notification of Spark Arrester Requirement for State of California It is a violation of Section or to use or operate the engine on any forest-covered, brush-covered, or grass-covered land unless the engine is equipped with a spark arrester, as defined in Section, maintained in effective working order or the engine is constructed, equipped, and maintained for the prevention of fire pursuant to Section.
TABLE OF CONTENTS Description Page No. Anchor Drill Stand with Wheels and Carriage... Steel Base Drill Stand with Carriage... Anchor Drill Stand with Wheels Assembly... 6 Steel Base Stand Assembly... 7 Heavy Duty Roller Carriage Assembly... 8 Autofeed Quick Disconnect Carriage Assembly... 0 - Carriage Plate Assembly Right and Left Side... Quick Disconnect Motor Mount Assembly... Quick Disconnect Motor Plate... Quick Disconnect Adapter Assembly... Adjustable Roller Assembly... 6 Non- Adjustable Roller Assembly... 7 Pinion Gear Assembly... 8 Spur Gear Assembly... 9 Side Roller Assembly... 0 Masts with Gear Racks... Warranty... Rear Cover
#778 M-6 Large Anchor Drill Stand w/carriage 6 60000 M-6 Mast w/gear Rack, 7" Long 60 Carriage Assembly, M-6 9000 Lock Washer, /" Split 9000 Hex Nut, /-0 6000 Large Anchor Base Assembly, M-6 6 900 Cap Screw, Hex Hd., /-0 x 8"
#7789 M-6 Steel Base Drill Stand w/carriage 6008 M-6 Steel Base Assembly 60 Carriage Assembly, M-6 60000 M-6 Mast w/gear Rack, 7" Long
#6000 M-6 Large Anchor Base Assembly 6 6 6 60006 M-6 Large Anchor Base Assembly 90008 Flat Washer, /" SAE 600 Wheel Bushing 0000 Wheel 6" x -/" x /8" 9000 Cap Screw, Hex Hd., /- x -/" 6 9000 Tap Bolt, Hex Hd., /8- x 6" 6
#6008 M-6 Steel Anchor Base Assembly 9 8 7 6 0099 Wheel, 6" X " X " 00009 Set Collar, " ID 900609 Heavy Hex Nut, /-0 9000 Lock Washer, /" Split 60088 Steel Base Weldment, M-6 6 6008 Mast Retainer, M-6 7 900608 Cap Screw, Hex Hd., /-0 x 9" 8 900 Hex Nut, /8-9 9000 Tap Bolt, Hex Hd., /8- x 6" 7
#60 M-6 Carriage Assembly 6 7 8 8 9 0 8 6009 Spoke Handle Assembly, M-6, Complete 60099 M-6 Right Side Carriage Plate Ass'y 600 Non-Adjustable Roller Assembly, M-6 600 Pinion Gear Assembly, M-6 6007 Spur Gear Assembly, M-6 6 60098 M-6 Left Side Carriage Plate Ass'y 7 699997 M6 QD Motor Mount Assembly 8 00697 Retaining Ring, /" Ext. 00-0 9 600 8 Side Roller Assembly, M-6 Only 0 600 Cover Plate, M-6, Power Raise & Lower 600 Carriage Lock, M-6 9007 Cap Screw, Soc. Hd., /-0 x /" 60009 Adjustable Roller Assembly, M-6
Intentionally Blank 9
#60 M-6 Autofeed Quick Disconnect Carriage Assembly Isometric View 7 6 6 7 7 7 6 9 9 8 8 0 8 6 7 8 9 0 9 6 0 0
#60 M-6 Autofeed Quick Disconnect Carriage Assembly 6000 Cover Plate 9006 Cap Screw, Soc. Hd., #0- x /" 009 Sprocket, #,0 Tooth 6009 Spur Gear Assembly, Modified, M-6 6009 Chain Guard for Hyd. M-6 6 9000 Cap Screw, Soc. Hd., /6-8 x " 7 9000 Lock Washer, /6" Split 8 90006 Cap Screw, Flat Head, /-8 x /" 9 6008 Motor Mount (OMM Hyd.) 0 60008 Hydraulic Motor, Danfoss OMM 007 Elbow, /8" O-Ring to /8" M. JIC 007 Long Elbow, /8" O-Ring to /8" M. JIC 90000 6 Lock Nut, /-0 Nylon 006 Adapter, /8" O-Ring to /8" M. JIC 008 Adapter, " O-Ring to /" F. Pipe 6 0006 Elbow, /" Male Pipe 7 000 Nipple, /" Quick Disconnect 8 6009 Threaded Rod, /-0 x " 9 0099 Manifold, M-6 Autofeed 0 0000 Coupler, /" Quick Disconnect 009 Hose Assembly, /8" x " Lg. HP 60 Handle Housing, M-6 606 Handle, Spoke, M- 900 Cap Screw, Soc. Hd., /8-6 x -/" 60089 Key, /" Sq. x " Long 6 9009 Cap Screw, Soc. Hd., /6-8 x /" 7 600 Sprocket, Hydraulic, M-6 8 60008 Chain, #,68 Pitch Length 9 0000 # Offset Link 0 9007 Cap Screw, Soc. Hd., /-0 x /" 60009 Adjustable Roller Assembly, M-6 600 8 Side Roller Assembly, M-6 Only 600 Non-Adjustable Roller Assembly, M-6 60098 M-6 Left Side Carriage Plate Ass'y 60099 M-6 Right Side Carriage Plate Ass'y 6 600 Pinion Gear Assembly, M-6 7 699997 M6 QD Motor Mount Assembly 8 600 Cover Plate, M-6, Power Raise & Lower 9 9006 Tap Screw, Hex Hd., /-0 X -/"
M-6 Carriage Plate Assemblies Right and Left Side #60099 Right Side 607 Carriage Plate, Right Side 00006 Bearing, " x -/" x 7/8" #60098 Left Side 606 Carriage Plate, Left Side, Hyd. M-6 00006 Bearing, " x -/" x 7/8"
699997 M-6 Quick Disconnect Motor Mount Assembly Isometric View 69999 M6 QD Motor Mount Assembly 699996 M6 QD Motor Mount Adapter Assembly
#69999 M-6 Quick Disconnect Motor Plate 8 Isometric View 7 6 69999 Quick Disconnect Motor Mount 9008 8 Capscrew, Soc Hd., /8"-6 X -/8" 900088 Cap Screw, Soc. Hd., /-0 x " 900089 Cap Screw, Soc. Hd., /-8 x " 00 Bronze Bearing, -/8" x " 6 900 Dowel Pin, /" Dia. x 6" 7 600 Key, /" Sq. x " Long 8 6006 Key, /8" Sq. x "
#699996 M-6 Quick Disconnect Adapter Assembly Isometric View 6 8 6 7 69999 QD Motor Mount Adapter 60009 Cam Shaft Housing 6000 Cam Shaft Bushing 60008 Cam Lock Shaft 9007 6 Cap Screw, Soc. Hd., /8-6 x -/" 6 9008 Cap Screw, Button Hd., /8- x /" 7 00 Ball Plunger M8 8 60 Key, /" Sq. x " Long
#60009 M-6 Adjustable Roller Assembly 6 900 Hex Nut, /8-900 Lock Washer, /8" Split 90000 Flat Washer, /8" SAE 6000 Roller,.0" Dia. 600 Eccentric Shaft 6 600 Spacer, 7/8" O.D. 6
#600 M-6 Non-Adjustable Roller Assembly 6008 Straight Shaft, M-6 600 Roller,.0" Dia. 90000 Flat Washer, /8" SAE 900 Lock Washer, /8" Split 900 Hex Nut, /8-7
#600 M-6 Pinion Gear Assembly 007 Retaining Ring," 6006 Spur Gear 8
#6007 M-6 Spur Gear Assembly 6008 Spur Gear Assembly, M-6 007 Retaining Ring," 9
#600 M-6 Only, Side Roller Assembly 6706 Side Roller Shaft 000 6 Aluminum Gasket Shim,.00" 67 Side Roller, Plastic 670 Side Roller Housing 9006 Cap Screw, Soc. Hd., #0- x /" 0
M-6 Masts with Gear Racks 60000 M-6 Mast w/gear Rack, 7" Long 600 M-6 Mast w/gear Rack, 96" Long 6006 M-6 Mast w/gear Rack, 0" Long
NOTES
NOTES
EQUIPMENT AND PARTS WARRANTY Diamond Products warrants all equipment manufactured by it against defects in workmanship or materials for a period of one () year from the date of shipment to Customer. The responsibility of Diamond Products under this Warranty is limited to replacement or repair of defective parts at Diamond Products Elyria, Ohio factory, or at a point designated by it, of such parts as shall appear to us upon inspection at such parts, to have been defective in material or workmanship, with expense for transportation and labor borne by Customer. In no event shall Diamond Products be liable for consequential or incidental damages arising out of the failure of any Product to operate properly. Integral units such as engines, electric motors, batteries, transmissions, etc., are excluded from this Warranty and are subject to the prime manufacturer s warranty. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND ALL SUCH OTHER WARRANTIES ARE HEREBY DISCLAIMED. Printed in U.S.A. Prospect Street, Elyria, Ohio 0 (0) -66 (800) -6 Fax (0) -8689 www.diamondproducts.com