N2 Specs

NORA N2 TECHNICAL SPECS N2 is a system of desks and panel units providing both electrification and functional solutions with accessories. SYSTEM N2 system consists of metal profile frames connected to the aluminum legs. Legs are powder coated aluminum. The legs touch to the ground by chromium-plating and metal feet. Melamine, recomposed veneer, compact laminate and recomposed compact veneer are available for table tops. Melamine table top's edges are flat ended and 2 mm. with 1. quality PVC edge band. It is applied through automatic machines using hot melt glue. CNC machines plug into a metal dowel after opening necessary holes. For recompose veneer desks, veneer is pressed on 18mm E1 qualification MDF or 13mm compact boards. Flat-ending edged are taped with 2 mm papel on MDF used tops. UV protection, primer and final coat of wax are applied during the process. ELECTRIFICATION Electrification cap is made from the material of the table top. Electrification cap is made from the material of the table top. Electrification options are available for meeting desks. Cable trays are assembled on desk profiles for electrification solutions on desks. Trays are produced by 1.2mm A1 quality DKP powder coat sheet. Cable trays are assembled on desk profiles for electrification solutions on desks. Trays are produced by 1.2mm A1 quality DKP powder coat sheet. Ground electrification connection is getting with the help of vertebra or vertical cable tray. MODESTY PANEL The width of modesty panels are 25cm; lengths are varying according to size of desks. On the sides of melamine panels, 1st quality 0.45mm PVC edge band is applied through, automatic machines using water based glue. E1 quality 18mm chip boards are produced by pressing on the double-sided coating on recomposed veneer panels Papel edge band are applied to the side of recomposed panel. Acrylıc panels are made of 12mm acrylic. Acrylıc panels are made of 12mm acrylic. Panels are connected to the bottom profile of the desk with vertical carriers. ACCESORIES N2 common accessories for use in functional solutions are assembled in cabinets. Accessories are produces by 1.2 mm A1 quality DKP powder coated sheet which is processed in laser. The tests for powder coated metal parts are in below; TESTING Test Name Test Duration Test Application Test Application Corrosion Test Minimum 300 Hours ASTM D 1654 (Salty Water) ASTM D 1654 (Salty Water) Rusting Resistance Test Minimum 400 Hours ASTM D 610 Corrosion Test Minimum 400 Hours Minimum 400 Hours ASTM D 1654 Impact Resistance Test ASTM D 2794 - ISO 6272 ASTM D 2794 - ISO 6272 Bend Test ASTM D 522 - ISO 6860 ASTM D 522 - ISO 6860

NORA N2 TECHNICAL SPECS Low Storage cabinets complement the series and add functionality. TOP & BODY & DOORS In Recomposed Veneer products; the veneer is pressed on 18 mm E1 quality chipboard. These cornered edges of the tops are shaped with 2 mm panels. Bottom of the table tops has holes for the necessary connections, these holes are made with CNC machines. After varnishing metal plugs will be inserted to these holes. After varnishing metal plugs will be inserted to these holes. When the tables are ready for varnish; sycamore tops the last varnish is acrylic based. All the other veneer products the last varnish is polyurethane. The varnish thickness is 60-70 micron. The resistance for scratches for varnished in horizontal and vertical surfaces is 0,8 N. In Lacquer products; 18 mm MDF calibrated and filled with polyurethane. In CNC machines the assembly holes are made and afterwards the tops are sandpapered to be varnished.. LEGS Bottom of the cabinets, specially cut metal profile is powder coated and the legs in chromium are connected to these profiles. These can be adjusted according to the floors inclination. Besides of the convenient leg shape it has also an aesthetic look. The metal parts are cleaned and phosphatize to protect them from rusting. The metal parts are powder coated with paint and according to the metal's features (epoxy polyester or not) At the end with this technique there would be a homogen 50-75 micron paint thickness in every surface. HANDLES Specially designed aluminum profiled handle is mounted through the drawer. Aluminum profile's chemical composition is suitable to TS.573, mechanical features is suitable to TS.755-2. PRODUCT TESTING Test Name Test Duration Test Application Test Application Corrosion Test Minimum 300 Hours ASTM D 1654 (Salty Water) ASTM D 1654 (Salty Water) Rusting Resistance Test Minimum 400 Hours ASTM D 610 Corrosion Test Minimum 400 Hours Minimum 400 Hours ASTM D 1654 Impact Resistance Test ASTM D 2794 - ISO 6272 ASTM D 2794 - ISO 6272 Bend Test ASTM D 522 - ISO 6860 ASTM D 522 - ISO 6860

NORA N1 CONFIGURING MODEL CODES (DESKS) (Base + Collection + Model + Leg + Material + Dimension + Electric) BASE MODEL CODE 402 Desks COLLECTION MODEL CODE UTO N2 MODEL CODES CONFIGURATIONS 060 W:60 cm Desk 080 W:80 cm Desk 090 W:90 cm Desk 110 W:110 cm Desk 120 W:120 cm Desk 160 W:160 cm Desk 180 W:180 cm Desk 126-2 W:126 Double Desk 126-4 W:126 Quadro Desk 126-6 W:126 Six Fold Desk 166-2 W:166 Double Desk 166-4 W:166 Quadro Desk 166-6 W:166 Six Fold Desk 186-2 W:186 Double Desk 186-4 W:186 Quadro Desk 186-6 W:186 Six Fold Desk 126-2-SD1 W:126 Double Desk w/ Single Side Ext. 126-4-SD1 W:126 Quadro Desk w/ Single Side Ext. 126-6-SD1 W:126 Six Fold Desk w/ Single Side Ext. 126-2-SD2 W:126 Double Desk w/ Double Side Ext. 126-4-SD2 W:126 Quadro Desk w/ Double Side Ext. 126-6-SD2 W:126 Six Fold Desk w/ Double Side Ext. 166-2-SD1 W:166 Double Desk w/ Single Side Ext. 166-4-SD1 W:166 Quadro Desk w/ Single Side Ext. 166-6-SD1 W:166 Six Fold Desk w/ Single Side Ext. 166-2-SD2 W:166 Double Desk w/ Double Side Extension 166-4-SD2 W:166 Quadro Desk w/ Double Side Extension 166-6-SD2 W:166 Six Fold Desk w/ Double Side Extension 186-2-SD1 W:186 Double Desk w/ Single Side Extension 186-4-SD1 W:186 Quadro Desk w/ Single Side Extension 186-6-SD1 W:186 Six Fold Desk w/ Single Side Extension 186-2-SD2 W:186 Double Desk w/ Double Side Extension 186-4-SD2 W:186 Quadro Desk w/ Double Side Extension 186-6-SD2 W:186 Six Fold Desk w/ Double Side Extension 090-M1 W:90 Meeting Desk 090-M2 W:90 Double Meeting Desk 090-M3 W:90 Triple Meeting Desk 110-M1 W:110 Meeting Desk 110-M2 W:110 Double Meeting Desk 110-M3 W:110 Triple Meeting Desk 126-M2 W:126 Double Meeting Desk 126-M4 W:126 Quadro Meeting Desk 126-M6 W:126 Six Fold Meeting Desk 166-M2 W:166 Double Meeting Desk 166-M4 W:166 Quadro Meeting Desk 166-M6 W:166 Six Fold Meeting Desk 186-M2 W:186 Double Meeting Desk 186-M4 W:186Quadro Meeting Desk 186-M6 W:186 Six Fold Meeting Desk 126-2-TRA 120ı Double-Angle Desk 126-3-TRA 120ı Triple-Angle Desk 126-4-TRA 120ı Quadro-Angle Desk 126-5-TRA 120ı Five Fold-Angle Desk 126-6-TRA 120ı Six Fold-Angle Desk 126-8-TRA 120ı Eight Fold-Angle Desk 126-9-TRA 120ı Nine Fold-Angle Desk 126-2-2 W:126 Double Desk w/ 2 Leg 166-2-2 W:166 Double Desk w/ 2 Leg 186-2-2 W:186 Double Desk w/ 2 Leg 120-2-M W:120 Meeting Desk w/ 2 Leg 160-2-M W:160 Meeting Desk w/ 2 Leg 180-2-M W:180 Meeting Desk w/ 2 Leg OPTION CODES LEGS 2 2 Leg 3 3 Leg 4 4 Leg OPTION CODES MATERIAL B VR CL CVR G Melamine R.Veneer Compact Laminate Compact R.Veneer Glass OPTION CODES ELECTRIC DTS HF BX DTB Desktop Side Electrification Cap Circular Electrification Cap Turnbox Electric Box Desktop Front Electrification Cap

NORA N1 CONFIGURING MODEL CODES (STORAGE UNITS) (Base + Collection + Model + Dimension + Material + Storage) BASE MODEL CODE 405 Storage Cabinets COLLECTION MODEL CODE UTO N2 MODEL CODES CONFIGURATIONS 161 Cabinet L:1614 202 Cabinet L:2024 DIMENSION CODE 62 H:62 cm OPTION CODES MATERIAL Body Door&Back Top E Lacquer Lacquer Lacquer EVR Lacquer Recomposed Veneer Lacquer VR Recomposed Veneer Recomposed Veneer Lacquer OPTION CODES STORAGE 2D 2 Drawer 3D 3 Drawer 4D 4 Drawer 1D1F 1 Drawer+1 Filing 2D2F 2 Drawer+2 Filing

NORA N1 STANDARD MATERIALS CODE MATRIX HORIZONTAL SURFACES TOP METAL MELAMINE RECOMPOSED VENEER COMPACT LAMINATE COMPACT VENEER EXTRA CLEAR GLASS POWDER COAT W400 R-PELESENK W400 R-PELESENK RAL9010 N0001 DESK & SIDE DESK TOP PP1302 R-WENGE PP1302 R-WENGE RAL9011 N9006 R1312 R-WALNUT R1312 R-WALNUT RAL7048 N9010 P102 R-BAMBU P102 R-BAMBU RAL8019 N7048 G4208 R-BLACK R-BLACK N8019 G4212 R-OAK R-OAK G4266 R-TEAK R-TEAK G4272 R-ALPEN GREY R-ALPEN GREYı G3104 FRONT PANELS RECOMPOSED MELAMINE ACRYLIC LACQUERED METAL HOLDER FRONT PANELS R-PELESENK W400 1000 ST RAL0001 N0001 R-WENGE PP1302 5807 ST RAL9006 N9006 R-WALNUT R1312 2806 ST RAL9016 N9010 R-BAMBU P102 4802 ST RAL7048 N7048 R-BLACK G4208 7250 ST RAL8019 N8019 R-OAK G4212 R-TEAK G4266 R-ALPEN GREY G4272 G3104

NORA ENVIRONMENTAL SPECS Being human is to care for future generations. MANUFACTURED IN TURKEY MATERIALS Holding the (TSE) Suitability to Turkish Standards certificate, N2 s containers and tables are manufactured with up to 32% recycled material. The E1 certified wood material used in the containers and tables is up to 100% reusable. The metal legs used in desk are 100% recyclable and the foam used in sofas are 100% reusable. The plywood used in the frame of the armchair and the wood material is reusable up to 100%. The fabrics used in the upholstery of N2, holding the TREVIRA CS, OEKO-TEX 100 STANDARD, IMO-MED, RECYCLABLE and EU ECOLABEL have passed the abrasion resistance (Martindale test), light fastness (EN ISO 105-B02), light fastness (EN ISO 105-X12), fastness to rubbing (EN ISO 105-X12) and fire resistance tests that are in conformity with European norms. PRODUCTION Nora is manufactured at Numaı A facilities, which holds the ISO 14001 Environmental Management System Standard and OHSAS 18001 Health and Safety Management System Standard certificates. WASTE MANAGEMENT At Numaı A.ı., the waste chemical materials like powder paint, wet paint, thinner, chemical material packaging, phosphate sludge and laser dust are sent to relevant companies for recycling or are disposed in a manner that will not harm the environment. TRANSPORT Nora s packaging made from 100% recyclable materials have been kept minimal in size, to decrease energy consumption during transportation. USE The quality standards of Nora s manufacturing and material, allow the product to have a long life. International bodies certify its high level of product security. END OF LIFE The materials used in its manufacturing may be re-used or recycled at the end of its product life.