Moulding Product Information Guide

Moulding Product Information Guide

Carvings are available in North American hardwoods, including: Alder (ALD) superior clear FAS grade; typical rustic characteristics are defected out (such as heavy mineral, heavy sap, or severe knots); pulled for uniform pink coloration Cherry (CH) FAS select grade, pulled for maximum red-colored heartwood on the best face Maple (MP/) New York and Michigan select hard maple; FAS grade 1&2 white () FAS superior grade select Appalachian red oak; pulled for wheat color (POP) Southern FAS natural poplar; a mixture of sap and heartwood; blacks, purples, and greens are acceptable; this is our paint-grade species for linear mouldings Most carvings are also available in species designed for price-sensitive projects, including: (RW) a member of the maple family, this hardwood comes from trees whose sap produces latex (rubber); an environmentally friendly wood due to its secondary use in furniture and carvings; dense tight grain with even coloration ranging from pink to light brown; accepts stain readily to match a wide variety of North American species () hardwoods including Asian white birch, Russian (Baltic) birch, and Asian soft maple; pale white in color with finely textured grain makes this species a good staining alternative to hard maple

Table of Contents Species....2 Warranty...3 Hand Carved Crown Moulding...4-6 Crown Moulding.... 7-15 Rope... 16-18 Dentil... 19-21 Embossed Moulding.... 22-23 Base Moulding... 24 Chair Rail.... 25 Accent Moulding... 26 Light Rail, Shelf & Stemware... 27-28 Beauty Moulding... 29 Creative Columns... 30-34 Fluted Columns.... 35 Transitional... 36-44 Rosettes.... 45-47 Notes... 48-51 Moulding Warranty believes in quality, integrity, and reliability. We uphold the highest standards of service and responsibility in the industry. As such, warrants all Decorative Wood and Moulding to be free from any defects in material and workmanship. This warranty is valid for up to 1 year from the time of original purchase. will send the original consumer purchaser, without charge, new replacement product of equal size and species to replace any defective wood or moulding product subject to this warranty. This warranty is a warranty of replacement only. specifically does not warrant removal of the defective product nor installation of the new one. This warranty does not cover the finish work on the new product, product that has been incorrectly installed, exposed to extreme temperatures or humidity, or otherwise used in any manner contrary to their intended purpose. Moulding sold in less than carton quantity is subject to damage in shipping and is not eligible for a warranty claim. In the unlikely event that a defective Decorative Wood or Moulding is encountered, please contact Customer Service at 800.463.0660. Please be able to provide a brief description and photographs of the defect. 3

Hand Carved Moulding HCM10 HCM10B HCM01 Series Name Width Depth Repeat Carton Qty HCM10XX 4-3/4 7/8 3-5/8 ALD, BW, CH, MP 80LF HCM10BXX 5-3/4 1-1/4 3-1/2 BW, MP 80LF HCM01XX 3-3/4 1 2-3/4 ALD, BW, CH, MP 80LF HCM06 HCM09 HCM08 Series Name Width Depth Repeat Carton Qty HCM06XX 3 1 24 ALD, BW, CH, MP 80LF HCM09XX 3-1/8 1 3-1/2 ALD, BW, MP 80LF HCM08XX 3-1/4 7/8 16 BW, CH, MP 80LF 4

Hand Carved Moulding HCM13 HCM11 HCM14 Series Name Width Depth Repeat Carton Qty HCM13XX 4 7/8 5-1/16 ALD, MP 80LF HCM11XX 1-5/16 3/4 1-13/16 BW, MP 80LF HCM14XX 5/8 5/16 1-1/8 MP 80LF HCM12 HCM07 HCM05 Series Name Width Depth Repeat Carton Qty HCM12XX 4 7/8 4-13/16 ALD, CH, MP 80LF HCM07XX 4-3/4 1-1/8 12 BW, CH, MP 80LF HCM05XX 4 1 12 ALD, BW, CH, MP 80LF 5

Rope Crown MC1 4-1/16 4-1/8 5-3/4 7/8 MC2 3-1/8 3-3/4 4-7/8 3/4 MC4 3-1/8 3-3/8 4-1/2 3/4 MC1XX 5-3/4 7/8 ALD, CH,,, POP 56LF MC2XX 4-7/8 3/4 ALD, CH,,, POP 64LF MC4XX 4-1/2 3/4 ALD, CH,,, POP 72LF 6

Rope Crown RC1 2-3/8 3-5/8 4-1/4 7/8 RC2 2 2 2-3/4 5/8 SC2R 2-1/4 2-1/2 3-3/8 3/4 RC1XX 4-1/4 7/8 ALD, CH,,, POP 72LF RC2XX 2-3/4 5/8 ALD, CH,,, POP 120LF SC2R-XX 3-3/8 3/4 ALD, CH,,, POP 80LF 7

Dentil Crown DC2 3-3/4 4 5-1/2 1-1/4 DC1 2-1/2 2-3/4 3-3/4 1 DC2XX 5-1/2 1-1/4 ALD, CH,,, POP 56LF DC1XX 3-3/4 1 ALD, CH,,, POP 72LF SC2D 2-1/4 2-1/2 3-3/8 3/4 DC4 2 2 2-3/4 3/4 SC2DXX 3-3/8 3/4 ALD, CH,,, POP 80LF DC4XX 2-3/4 3/4 ALD, CH,,, POP 80LF 8

Standard Crown SC15 SC12 4-5/8 3-1/4 4-9/16 4-7/16 6-1/2 5-1/2 3/4 11/16 SC15XX 6-1/2 3/4 ALD, CH,,, POP 56LF SC12XX 5-1/2 11/16 ALD, CH,,, POP 64LF SC14 SC21 3-5/16 3-1/16 3-1/8 3-5/16 4-1/2 4-1/2 3/4 3/4 SC14XX 4-1/2 3/4 ALD, CH,,, POP 72LF SC21XX 4-1/2 13/16 ALD, CH,,, POP 72LF 9

Standard Crown SC20 SC11 3-1/8 2-13/16 3-3/8 3-3/16 4-1/2 4-1/4 3/4 5/8 SC20XX 4-1/2 3/4 ALD, CH,,, POP 72LF SC11XX 4-1/4 5/8 ALD, CH,,, POP 72LF SC19 SC5 2-3/8 2 3-3/8 4-1/8 3-1/8 3-5/8 7/8 11/16 SC19XX 4-1/8 7/8 ALD, CH,,, POP 72LF SC5XX 3-5/8 11/16 ALD, CH,,, POP 80LF 10

Standard Crown SC2 2-1/4 SC1 2-1/8 2-1/2 3-3/8 2-1/2 3-1/4 3/4 3/4 SC2XX 3-3/8 3/4 ALD, CH,,, POP 80LF SC1XX 3-1/4 3/4 ALD, CH,,, POP 80LF SC3 1-3/4 SC16 1-1/2 1-1/2 2 2-5/8 3/4 2-1/4 11/16 SC13 1-3/16 1-7/16 2 3/4 SC3XX 2-5/8 11/16 ALD, CH,,, POP 120LF SC16XX 2-1/4 3/4 ALD, CH,,, POP 120LF SC13XX 2 5/8 ALD, CH,,, POP 120LF 11

Standard Crown MC8 MC9 MC8XX 2-1/2 3/4 ALD, CH,, POP 80LF MC9XX 3-1/4 3/4 ALD, CH,, POP 80LF MC7 MC10 MC7XX 4-1/4 3/4 ALD, CH,, POP 64LF MC10XX 5-1/4 3/4 ALD, CH,, POP 56LF 12

Cove Crown COV-6 COV-5 COV-6-XX 6 3/4 ALD, CH,,, POP 56LF COV-5-XX 5 3/4 ALD, CH,,, POP 56LF COV-4 COV-3 COV-4-XX 4 3/4 ALD, CH,,, POP 64LF COV-3-XX 3 3/4 ALD, CH,,, POP 80LF 13

Shaker Crown SHA-6 SHA-5 SHA-6-XX 6 3/4 ALD, CH,,, POP 56LF SHA-5-XX 5 3/4 ALD, CH,,, POP 56LF SHA-4 SHA-3 SHA-4-XX 4 3/4 ALD, CH,,, POP 64LF SHA-3-XX 3 3/4 ALD, CH,,, POP 80LF 14

Specialty Crown FBC1 1-1/8 MC6 1-1/16 SC19-E SC4-E 2-3/8 3-3/8 1-1/2 4-1/8 5/8 2 1/2 2-1/4 1/2 3/16 FBC1XX 2 1-1/8 ALD, CH,,, POP 120LF MC6XX 2-1/4 1-1/8 ALD, CH,,, POP 80LF 2-1/8 2-5/8 3/4 1-1/2 3/4 3-5/8 3/4 SC19-E-XX 4-1/8 3/4 ALD, CH,,, POP 40LF SC4-E-XX 3-5/8 3/4 ALD, CH,,, POP 48LF ALD Alder BW Basswood MP CH Cherry Hard Maple POP Maple Hard Maple RW 15

Half Round Rope RMH250 RMH250B RMH250XX-8 2-1/2 1-1/4 ALD, CH,,, POP 4 sticks RMH250BXX-96 2-9/16 1-1/4 ALD, CH,,, POP 4 sticks RMH2 RMH2B RMH2XX-8 2 1-1/16 ALD, CH,,, POP 5 sticks RMH2BXX-96 2 15/16 ALD, CH,,, POP 5 sticks RMH150 RMH150B RMH150XX-8 1-1/2 11/16 ALD, CH,,, POP 10 sticks RMH150Bxx-96 1-7/16 5/8 ALD, CH,,, POP 10 sticks 16

Half Round Rope RMH1 RMH1XX-8 1 7/16 ALD, CH,,, POP 20 sticks RMH34 RMH34T RMH34B RMH34XX-8 3/4 5/16 ALD, ASH, CH,,, POP 20 sticks RMH34TXX-8 3/4 5/16 ALD, CH,,, POP 20 sticks RMH34BXX-8 3/4 3/8 ALD, CH,,, POP 20 sticks RMH58 RMH58T RMH58XX-8 5/8 1/4 ALD, CH,,, POP 20 sticks RMH58TXX-8 5/8 1/4 ALD,,, POP 20 sticks 17

Half Round Rope RMH12 RMH12T RMH12XX-8 1/2 3/16 ALD, CH,,, POP 20 sticks RMH12TXX-8 1/2 3/16 ALD, CH,,, POP 20 sticks RMH38 RMH38T RMH38XX-8 3/8 3/16 ALD, CH,,, POP 20 sticks RMH38TXX-8 3/8 3/16 ALD, CH,, POP 20 sticks RMH14 RHM14XX-8 1/4 1/8 ALD, CH,,, POP 20 sticks 18

Dentil DEN1 DEN10 DEN1XX 1-1/4 1/2 ALD, CH,,, POP 120LF DEN10XX 1 1/4 ALD,,, POP 120LF DEN3 DEN7 DEN3XX 7/8 3/8 ALD, CH,,, POP 120LF DEN7XX 11/16 3/16 ALD, CH,,, POP 120LF 19

Dentil DEN19 DEN18 DEN19XX 3/4 1/2 ALD, CH,,, POP 120LF DEN18XX 5/8 1/4 ALD, CH,,, POP 120LF DEN5 DEN21 DEN5XX 1/2 1/4 ALD, CH,,, POP 120LF DEN21XX 9/16 3/8 ALD, CH,,, POP 120LF 20

Dentil DEN20 DEN8 DEN20XX 3/4 1/2 ALD, CH,, POP 120LF DEN8XX 5/8 1/2 ALD, CH,,, POP 120LF DEN9 DEN9XX 7/8 11/16 ALD, CH,,, POP 120LF 21

Embossed EM-3 EM-4 EM-3XX 11/16 1/4 ALD, CH,,, POP 120LF EM-4XX 1 9/16 ALD, CH,,, POP 120LF EM-5 EM-2 EM-5XX 1-1/4 5/16 ALD, CH,,, POP 120LF EM-2XX 1-1/2 7/8 ALD, CH,,, POP 80LF 22

Embossed EM-6 EM-9 EM-6XX 4-5/16 1/2 ALD, CH,, POP 80LF EM-9XX 2-3/4 1/2 ALD, CH,, POP 120LF 23

Base BBM1 BBM2 BBM1XX 3-1/2 5/8, POP 80LF BBM2XX 3-1/2 3/4,, POP 80LF 34QTR 12QTR 34QTRXX-8 3/4 3/4 ALD, CH,,, POP 15 sticks 12QTRXX-8 3/4 1/2 ALD, CH,,, POP 120LF 24

Chair Rail CHR1 CHR2 CHR1-POP 2-1/2 11/16 POP 80LF CHR2-POP 2-1/2 11/16 POP 80LF 25

Accent OCM1 BFM1 OCM1XX 3/4 3/4 ALD, CH,,, POP 120LF BFM1XX 13/16 3/8 ALD, CH,,, POP 120LF SCRIBE1 SCRIBE2 SCRIBE3 SCRIBE1XX 3/4 3/16 ALD, CH,,, POP 320LF SCRIBE2XX 1-1/4 1/4 ALD, CH,, 120LF SCRIBE3 3/4 1/4 ALD,, 120LF 26

Light Rail LR005 LR006 LR005-XX 2-1/8 2 ALD, CH,,, POP 64LF LR006-XX 2-1/8 2 ALD, CH,,, POP 64LF LR002 LR003 LR002-XX 2-1/4 2-1/16 ALD, CH,,, POP 48LF LR003-XX 2-13/16 2-5/16, POP 64LF 27

Light Rail, Shelf & Stemware LR005-F LR001 LR005-F-XX 2 2-1/8 ALD, CH,,, POP 64LF LR001-XX 1-1/2 13/16 ALD, CH,,, POP 80LF SE1 STMW SE1XX 1-5/8 7/8 ALD, CH,,, POP 120LF STMW-XX 3-3/16 3/4 ALD, 40LF 28

Beauty BM4 BM2 BM4XX 1-1/2 3/4 ALD, CH,,, POP 120LF BM2XX 15/16 5/16 ALD, CH,,, POP 120LF BM1 BM3 BM1XX 7/8 5/8 ALD, CH,,, POP 120LF BM3XX 1 1/4 ALD, CH,,, POP 120LF 29

Creative Columns CMD150 CMD2 CMD250 Series Name Width Depth Length Carton Qty CMD150XX-96 1-1/2 11/16 96 ALD, CH,,, POP 4 sticks CMD150XX-36 1-1/2 11/16 36 ALD,, POP 4 sticks CMD150XX-42 1-1/2 11/16 42 ALD,, POP 4 sticks CMD2XX-96 2 15/16 96 ALD, CH,,, POP 4 sticks CMD2XX-36 2 15/16 36 ALD, CH,, POP 4 sticks CMD2XX-42 2 15/16 42 ALD, CH,, POP 4 sticks CMD250XX-96 2-1/2 1-1/8 96 ALD, CH,,, POP 4 sticks CMD250XX-36 2-1/2 1-1/8 36 ALD,, POP 4 sticks CMD250XX-42 2-1/2 1-1/8 42 ALD,, POP 4 sticks 30

Creative Columns CMR150 CMR2 CMR250 Series Name Width Depth Length Carton Qty CMR150XX-96 1-1/2 11/16 96 ALD, CH,,, POP 4 sticks CMR150XX-36 1-1/2 11/16 36 ALD, CH,,, POP 4 sticks CMR150XX-42 1-1/2 11/16 42 ALD, CH,,, POP 4 sticks CMR2XX-96 2 13/16 96 ALD, CH,,, POP 4 sticks CMR2XX-36 2 13/16 36 ALD, CH,,, POP 4 sticks CMR2XX-42 2 13/16 42 ALD, CH,,, POP 4 sticks CMR250XX-96 2-1/2 1-1/8 96 ALD, CH,,, POP 4 sticks CMR250XX-36 2-1/2 1-1/8 36 ALD, CH,,, POP 4 sticks CMR250XX-42 2-1/2 1-1/8 42 ALD,, POP 4 sticks 31

Creative Columns CMS150 CMS2 CMS250 Series Name Width Depth Length Carton Qty CMD150XX-96 1-1/2 11/16 96 ALD, CH,,, POP 4 sticks CMD150XX-36 1-1/2 11/16 36 ALD, CH,,, POP 4 sticks CMD150XX-42 1-1/2 11/16 42 ALD, CH,, POP 4 sticks CMD2XX-96 2 15/16 96 ALD, CH,,, POP 4 sticks CMD2XX-36 2 15/16 36 ALD, CH,, POP 4 sticks CMD2XX-42 2 15/16 42 ALD, CH,, POP 4 sticks CMD250XX-96 2-1/2 1-1/8 96 ALD, CH,,, POP 4 sticks CMD250XX-36 2-1/2 1-1/8 36 ALD, CH,,, POP 4 sticks CMD250XX-42 2-1/2 1-1/8 42 ALD, CH,, POP 4 sticks 32

Creative Columns RMH150 RMHR2 RMH250 Series Name Width Depth Length Carton Qty RMH150XX-8 1-1/2 11/16 96 ALD, CH,,, POP 10 sticks RMH150XX-36 1-1/2 11/16 36 ALD, CH,,, POP 4 sticks RMH150XX-42 1-1/2 11/16 42 ALD, CH,, POP 4 sticks RMH2XX-8 2 1-1/16 96 ALD, CH,,, POP 5 sticks RMH2XX-36 2 1-1/16 36 ALD, CH,,, POP 4 sticks RMH2XX-42 2 1-1/16 42 ALD, CH,,, POP 4 sticks RMH250XX-8 2-1/2 1-1/4 96 ALD, CH,,, POP 4 sticks RMH250XX-36 2-1/2 1-1/4 36 ALD, CH,,, POP 4 sticks RMH250XX-42 2-1/2 1-1/4 42 ALD, CH,,, POP 4 sticks 33

Creative Columns RMH150B RMH2B RMH250B Series Name Width Depth Length Carton Qty RMH150BXX-96 1-1/2 11/16 96 ALD, CH,,, POP 10 sticks RMH2BXX-96 2 1-1/16 96 ALD, CH,, POP 5 sticks RMH250BXX-96 2-1/2 1-1/4 96 ALD, CH,,, POP 4 sticks 34

Fluted Columns FLT2 Series Name Width Depth Length Carton Qty FLT2XX 3 5/8 96 ALD, CH,,, POP 80LF FLT3XX 3-1/2 5/8 96 ALD, CH,,, POP 80LF FLT4XX 4 5/8 96 ALD, CH,,, POP 80LF FLTC2 Series Name Width Depth Length Carton Qty FLTC2 2-7/8 3/4 96 80LF FLTC3 3-3/4 1 96 80LF FLTC4 5 1-3/16 96 80LF 35

Corner CC4 CC5 CC1 Series Name Width Depth Length Carton Qty CC4XX 2-3/4 3/4 96 ALD, CH,,, POP 120LF CC5XX 2-5/8 3/4 96 ALD, CH,,, POP 120LF CC1XX 2-3/4 3/4 96 ALD, CH,,, POP 80LF 36

Corner CC2 MC5 MC5B Series Name Width Depth Length Carton Qty CC2XX 2-9/16 7/8 96 ALD, ASH CH,,, POP 80LF MC5XX 2-3/4 1-1/8 96 ALD, CH,,, POP 80LF MC5BXX 2-3/4 1-1/8 96 ALD, CH,,, POP 80LF 37

Creative Columns Transitions CAP6-2 CAP6-150 CAP6-250 Series Name Width Depth Height Carton Qty CAP6-2XX 3-7/16 1-3/4 4-13/16 ALD, CH,,, RW 50 CAP6-150XX 2-5/8 1-5/16 3-5/8 ALD, CH,,, RW 100 CAP6-250XX 4-7/16 2-3/16 5-7/8 ALD, CH,,, RW 50 SPLH150 SPLH2 SPLH250 Series Name Width Depth Height Carton Qty SPLH150XX 2-1/4 1-1/16 10 ALD, CH,,, POP 50 SPLH2XX 2-3/4 1-5/16 10 ALD, CH,,, POP 45 SPLH250XX 3-1/4 1-9/16 10 ALD, CH,,, POP 40 38

Creative Columns Transitions SPLICE150 SPLICE2 SPLICE250 Series Name Width Depth Height Carton Qty SPLICE150XX 2-1/4 1-1/8 2-1/2 ALD, CH,, 50 SPLICE2XX 2-3/4 1-3/8 3 ALD, CH,, 50 SPLICE250XX 3-1/4 1-5/8 3-1/2 ALD, CH,, 50 TF150 TF2 TF250 Series Name Width Depth Height Carton Qty TF150XX 2-1/4 1-1/8 3-1/2 ALD, CH,, 100 TF2XX 3-3/4 1-3/8 4-1/2 ALD, CH,, 100 TF250XX 3-1/4 1-5/8 5-1/2 ALD, CH,,,RW 100 39

Transition Blocks TB1 TB1A Series Name Width Depth Height Carton Qty TB1-XX 2-7/8 1-7/8 9-7/8 ALD, CH, MP,, RW 50 TB1A-XX 2-7/8 1-7/8 9-7/8 ALD, CH, MP,, RW 50 40

Transition Blocks TB1 TB1A Series Name Width Depth Height Carton Qty TB5-XX 2-7/8 2 9-7/8 ALD, CH, MP,, RW 50 TB5A-XX 2-7/8 2 9-7/8 ALD, CH, MP,, RW 50 41

Transition Blocks TB7 TB4 TB3 Series Name Width Depth Height Carton Qty TB7-XX 2-1/4 1-1/8 11-1/4, RW 50 TB4-XX 2-3/4 1 4 ALD, CH,,, POP 50 TB3-XX 2-11/16 7/8 4 ALD, CH,,, POP 100 42

Transition Blocks SPOL1 PLN2 PLN1 Series Name Width Depth Height Carton Qty SPOL1-XX 2-1/2 1-1/4 3 CH, MP, RW 100 PLN1-RW 5-1/2 7/8 10 RW 20 PLN2-RW 3-1/2 7/8 10 RW 25 43

Moulding Cornice Blocks TB2 MCB-2 MCB-1 MCB-3 Series Name Width Depth Height Carton Qty TB2-XX 2-13/16 1-7/8 5-15/16 ALD, CH,,, RW 50 MCB-3-RW 4 4 6-1/4 RW 20 MCB-1-RW 3 3 6-1/4 RW 20 MCB-2-RW 3 3 6-1/4 RW 20 44

Rosettes ROS1 ROS2 ROS3 Series Name Width Depth Height Carton Qty ROS1XX 3 7/8 3 ALD, CH,, 100 ROS2XX 3 7/8 3 ALD, CH, 100 ROS3XX 3-1/2 1-1/8 3-1/2 ALD,, 100 45

Rosettes ROS6 ROS5 ROS4 Series Name Width Depth Height Carton Qty ROS6-RW 5-1/2 7/8 5-1/2 RW 30 ROS5-RW 3-1/2 7/8 3-1/2 RW 100 ROS4XX 4 1 4 MP,, POP 100 46

Rosettes SROS1 Series Name Width Depth Height Carton Qty SROS1XX 3 7/8 3 ALD, MP, RW, 100 SROS2XX 3-1/2 7/8 3-1/2 ALD, MP, RW, 100 SROS3XX 4 7/8 4 ALD, MP, RW, 50 FDLROS1 Series Name Width Depth Height Carton Qty FDLROS1XX 3 7/8 3 ALD, CH,,, RW 100 FDLROS2XX 3-1/2 7/8 3-1/2 ALD, CH,,, RW 100 FDLROS3XX 4 7/8 4 ALD, CH,,, RW 50 47

Notes 48

Notes 49

Notes 50

Notes 51

All decorative wood carvings are stocked in our regional warehouses, with 98% fill rates and same-day shipping for fast delivery Designer-driven selection of carvings:»» Over 2500 SKUs of corbels, posts, legs & feet, onlays, capitals, and hand carved moulding.»» Over 100 copyright-protected designs unique to.»» Designs offered in size families, allowing the same design to be carried throughout the home in different applications.»» Each piece is CNC machined for exact pattern duplication and hand carved for finishing details.»» All items are hand sanded to a smooth finish, and individually inspected under bright light.»» Every carving is packed with a silica bag for moisture protection, shrinkwrapped to protect against soiling, and UPC labeled for retail sale. 800-463-0660 fax 318-742-9513 CATMOULDPIG18-1