First Announcement Automation and Infomation Technology in Iron & Steel Making Automation and Information Technology in Iron & Steel Making : Vision 225 December 7-9, 26, RDCIS, SAIL, Ranchi, India Organised by Technology Knowledge Society Ranchi In Association with Steel Authority of India Limited R & D Centre for Iron and Steel Ranchi
5 th International Conference on Introduction Automation & Information Technology (IT) has a significant impact on how the steel is manufactured today. Automation & IT solutions are finding application in various spheres of Process Control and the entire range of steel plant operations, with a view to enhancing the competitive edge of a company. Modern process control and expert systems, energy efficient equipments, seamless automation architecture, production management functions, all are important building blocks of any ideal manufacturing enterprise today and Steel industry is not an exception. Specific benefits include improved plant throughput and productivity, enhanced worker safety, increased energy efficiency, higher process yields, waste product minimization, improved product consistency and uniformity. The continuous research and development in this ever expanding arena necessitates exchange of technical information & experiences among the steel and automation fraternity as also deliberation on challenges and opportunities that exist today and in future. International Conference on Automation and Information Technology in Iron & Steel Making (AITISM) is organised biennially at Ispat Bhawan, R&D Centre for Iron & Steel, Ranchi, with the objective to provide a forum for sharing innovations, discussing challenges and opportunities, exploring research and business opportunities and benchmarking Automation & IT technologies of today and tomorrow for steel industry. Previously held AITISM conferences witnessed an overwhelming participation by Steel Producers, Technologists, Academicians and technology vendors from India and Overseas. The 5 th International Conference on Automation & Information Technology in Iron & Steel Making : Vision 225 (AITISM 6) is being organized by Technology Knowledge Society(TKS), Ranchi in association with R&D Centre for Iron & Steel (RDCIS) Steel Authority of India Limited, Ranchi. AITISM 6 once again aims to provide a unique opportunity for deliberations and exchange of ideas among scientists and technologists from research/ academic institutes, technology developers, steel makers, maintenance & project personnel, consultants and manufacturers to share their experience and find new directions in producing high value products through efficient production processes and management functions. Please visit conference website www.aitism-ranchi.in for further details and future updates. Conference Date & Venue AITISM 6 will be held during December 7-9, 26 at Ispat Bhawan, R&D Centre for Iron & Steel, Steel Authority of India Limited, Doranda, Ranchi - 8342, India.
Automation and Infomation Technology in Iron & Steel Making Language Official language of the Conference is English. Conference Theme AITISM 6 aims to provide a forum for sharing knowledge & expertise in innovations, state of art systems & technologies being developed and implemented in the area of Automation & IT to enhance the performance of steel industry. In addition, deliberations on topics of fundamental research relevant to Automation & IT for steel will be included. The conference program will include Technical Paper Presentations, Manufacturer Presentations, Technical Exhibition and so on. The broad areas the conference will focus upon are: Innovative Automation, IT and engineering interventions for process Improvement in Mining, Raw Material Handling, Coke Making, Iron & Steel Making, Rolling Mills, Processing Lines, Auxiliaries of Iron and Steel plant Energy Efficient & Environment friendly Automation Systems Modeling and Simulation for Process Control Expert / Knowledge Management Systems Application of Soft Computing Techniques, IT Networking & Information Security Advancement and Futuristic Automation & IT technologies for steel enterprises Computerization of Business Functions through ERP & MES Wireless and Mobile computing for control and information system Innovative engineering interventions providing backbone for Automation & IT systems Mechatronics & Robotics application Any other area related to Automation & IT in Iron and Steel making Call for Contributory Papers Technical papers are invited for presentation in the Conference. Prospective contributors are requested to submit the abstract of not more than 4 words for review preferably through email at aitism6@sail-rdcis.com/aitism6@gmail.com. The templates of the abstract can be downloaded from conference website www.aitism-ranchi.in. It shall be the endeavor to give preference to papers which deal in new advancement, developments and innovations in the aforesaid areas. All papers submitted shall be original and should not have been presented/ published earlier. All the abstracts will be reviewed by the Technical Committee before their acceptance. Authors of the accepted paper will be requested to submit the full text of paper as per guidelines to be provided along with letter of acceptance. All accepted papers received in time shall be published in Conference proceedings, a copy of which shall be provided to all registered delegates during the Conference. Author(s) of accepted papers who will be attending the conference to present the paper will need to register as a delegate(s) by paying delegate registration fee. Call for Papers Receipt of abstract 3.6.26 Communication to the Author of accepted paper 3.8.26 Receipt of full text of paper 3.9.26
5 th International Conference on Invited Speakers Keynote address and invited talks on selected themes, will be delivered by some of the renowned scientists and technologists. The list of the invited keynote speakers will be available in the Conference website as well as in the next circular. Manufacturers' Presentation Manufacturers and technology solution providers dealing with Automation and Information Technology (IT) are invited to the Conference to disseminate technical information about their products/ services / innovations being offered for steel industry through multimedia presentation in 'Manufacturers' Presentation Session' during the Conference. A nominal fee of `,. (US $ 2) shall be charged for each presentation of 25 minutes duration. The charges include free registration of the presenter as delegate. Technical Exhibition With a view to showcase the advancements made in the products and solutions of Automation and Information Technology for Steel Industry, it is planned to organise a Technical Exhibition during the Conference. Technology Suppliers, Equipment Manufacturers, Automation Specialists, Laboratory Equipment Manufacturers, IT Service Providers etc are invited to participate in the technical exhibition to highlight their products and services. Exhibition space of about 3 m x 2.5 m shall be provided to each exhibitor. A nominal fee of ` 8,. (US $ 5) shall be charged for each exhibition stall, which will be provided with adequate furnishing and basic illumination facilities. The charges include free registration of one person as delegate. Souvenir & Advertisements A Souvenir containing Conference details and informative articles shall be released during the Conference and will be provided to each registered delegate. Automation, IT manufacturers, Service providers and other relevant organizations are invited to place advertisements highlighting their products and achievements. Advertising material may be provided in soft copy and submitted to the conference secretariat latest by 3.9.26. Advertisements for the souvenir can be booked at the following rates: Back Cover (Colour ) : ` 6,. (US $ 2) Front & Back Insides (Colour) : ` 4,. (US $ 9) each Colour Full Page : ` 3,. (US $ 6) B & W Full Page : ` 2,. (US $ 45) B & W Half Page : ` 5,. (US $ 3)
Automation and Infomation Technology in Iron & Steel Making Delegate Registration Professionals, researchers, entrepreneurs, academicians, technology solution providers & product manufacturers and all concerned with Automation & IT of steel from across the globe are invited to attend the conference and benefit from the large wealth of knowledge and expertise available during the conference. Registration fee includes Conference Kit containing Conference CD, printed materials, tea/coffee, lunches, dinners and cultural program during the Conference. There will be no additional charges for accompanying spouses of outstation delegates. Author(s) of accepted papers who will be attending the conference to present the paper will also need to register as a delegate. A nominal fee is to be paid for registration of the delegate at the following rates: Category Indian Overseas Individual `,. US $ 3 Group (minimum 3 delegates) ` 25,. US $ 75 CSI Members and Academic Institutes ` 8,. US $ 25 Engineering Students (Does not include conference kit except conference proceedings and CD) `,. US $ 5 Delegates may register on-line through Conference website or alternatively, fill up the registration form and send the same to the conference secretariat. Registration fee may be paid either by electronic fund transfer or through cheque/demand draft as per details given in this brochure. Sponsorship Sponsorship is solicited from companies of National and International repute in the field of steel making technology, equipment and solution providers, Automation & IT groups and Research Institutes who wish to sponsor the conference. The sponsor will get wide publicity during the Conference through display of banners, mentions in Conference, Proceedings, Souvenir and other media. The details regarding various categories of Sponsorship are given below: Charges Category Indian Overseas Complimentary Benefits (` In Lakhs) (US $) 6 Free delegates stall in Technical Exhibition + Business Desk Platinum 5., slot in Manufacturer Presentation Full Page Colour Advertisement in Souvenir Display of Company logo in conference material and banners 4 Free delegates stall in Technical Exhibition Gold 4. 8, slot in Manufacturer Presentation Full Page Colour Advertisement in Souvenir Display of Company logo in conference material and banners 2 Free delegates stall in Technical Exhibition Silver 2.5 5, Full Page Colour Advertisement in Souvenir Display of Company logo in conference material and banners
5 th International Conference on Payment Details All payments related to registration of delegates, sponsorship, advertisements, technical exhibition, manufacturers' presentation etc. are to be made in Indian Rs/US $ through crossed demand draft / cheque payable at par and drawn in favour of TKS-AITISM'6 payable at Ranchi. Money can also be transferred electronically to the Conference Account having the following details: A/c Name : TKS-AITISM'6 A/c No. : 482876687 IFSC Code : UBIN5484 SWIIFT Code : UBININBBJAM MICR Code : 834267 Bank s Name & Address : Union Bank of India Shyamli Colony, Post-Hinoo, Ranchi-2, INDIA About Ranchi Ranchi, the capital of the state of Jharkhand which is endowed with rich iron ore and coal deposits, is an important industrial hub in India. Famous for its natural scenic beauty and still unspoilt by modern commercialism, Ranchi is located in the eastern part of India, around 4 kms from Kolkata. Ranchi has very pleasant and moderate climate. During the month of December the temperature could vary from +8 C to +2 C. Travel Domestic airlines connect Ranchi with Delhi, Kolkata, Mumbai, Bengaluru and Patna. Ranchi is well connected by rail and road network with all major cities of India such as Bengaluru, Bhubaneshwar, Chennai, Jamshedpur, Jaipur, Kolkata, Mumbai, Nagpur, Patna, Raipur, New Delhi, Vishakhapatnam and Steel Cities located in Eastern part of India.
Automation and Infomation Technology in Iron & Steel Making Hotel Accommodation: Ranchi offers a range of accommodation to suit every budget. Both economy and luxury class hotels are available in Ranchi within 5 Km from the Conference venue. Delegates are requested to book the accommodation in advance. For assistance in advance booking, Conference Secretariat may be approached. A list of prominent hotels in Ranchi is given below: HOTELS Tel No. +9 65 Fax +9 65- E-mail Tariff (`)** AC Single AC Double Radisson Blu* 662222 662223 info@rdranchi.com Capitol Hill* 23333/2 23326 reservation@hotelcapitolhill.com Ranchi Ashok* 248759/65 248768 info@hotelranchiashok.com Yuvraj Palace* 248326/27 248328 info@hotelyuvrajpalace.com 55-75/- 65-2/- 4-45/- 45-5/- 35-45/- 4-45/- 35-45/- 4-45/- Golden Tulip* 2552234 255224 info@goldentulipranchi.com Green Acres 225224/4/44 2252246 contactus@hotelgreenacre.com Green Horizon 2462/3 2462552 contactus@hotelgreenhorizon.com Capitol Residency 2223/37 22238 cresidency@gmail.com Kwality Inns 24628/469 246783 kwalityinns_9@hotelkwalityinn.com Chinar 22778/83 224327 hotelchinar@ymail.com Yuvraj 2482842/778 248853 info@hotelyuvrajpalace.com Landmark 2565/53 25657 enquiry@hotellandmark.com Chanakya BNR* 246489/8 246584 reservations@chanakyabnrranchi.com 25-6/- 29-7/- 35-59/- 4-65/- 22-28/- 26-32/- 24-28/- 28-32/- 2-3/- 25-35/- 2275-5/- 255-5/- 6-28/- 9-23/- 8-24/- 225-27/- 225-7/- 4-7/- * Deluxe Rooms & Suites are available in these hotels. "Tariff indicated is tentative and is subject to change. Taxes are extra.
5 th International Conference on Organizing Committee All correspondence may be made at following address: Dr. B. B. Agrawal Convenor, Organising Committee, AITISM'6 and GM (Business Excellence and Automation & Engineering) Research & Development Centre for Iron & Steel Steel Authority of India Limited Ispat Bhawan, Ranchi - 8342, Jharkhand, India Phone : +9 (65) 24 Fax : +9 (65) 24 E-mail : aitism6@sail-rdcis.com, aitism6@gmail.com Website : www.aitism-ranchi.in