5500K LED Mdule Descriptin: Size, Quantity f LEDs, Pwer, Brightness Vltage Dimming CRI: (R4) 84 ~6 x 6 x 0.28-in, 36 LEDs, 6-watts, 60 lm ~6 x 6 x 0.28-in, 49 LEDs, 8-watts, 830 lm ~2 x 2 x 0.28-in, 44 LEDs, 25-watts, 2440 lm ~2 x 2 x 0.28-in, 96 LEDs, 33-watts, 3330 lm 24-vdc [Cnstant Vltage] Pulse Width LED dimmer Clr (Kelvin): ~5500K +/- 200 LED Luminescent Maintenance L 70 Cnstructin: Weight (z): 6x6-inches 2x2-inches Certifi catin We Use Per IES TM-2-20 * Infrmatin frm Cree Services Evaluatin Reprt 23,000- hurs t a 30% decrease in brightness Aluminum Printed circuit bard, Cree LEDs ~ 4 ~ 5 UL Recgnized Cmpnant, File # E358479 Manufactured in the United States [imprted Cmpnents] by US Slid State, LLC., Shreveprt, Luisiana r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin.
Typical Phtmetric Data* 5500K 80.0 Spectral Pwer Distributin 780 650 Plar Candela Distributin 80 70 60 50 40 30 Radiant Flux (mw) 70.0 60.0 50.0 40.0 30.0 20.0 0.0 520 390 260 30 CD: 0 30 260 390 520 20 0 00 90 80 70 60 0.0 380 430 480 530 580 630 680 730 780 830 Wavelength (nm) 650 780 0 H 90 H 45 H VA: 0 0 20 30 40 50 Measured Spectral Pwer Distributin nm mw/nm nm mw/nm nm mw/nm nm mw/nm 380 0. 490 6.2 600 33.0 70 3.5 385 0. 495 8.9 605 3.2 75 3. 390 0. 500 2.9 60 29.4 720 2.7 395 0. 505 8.0 65 27.5 725 2.4 400 0.2 50 23.6 620 25.7 730 2. 405 0.5 55 28.7 625 23.6 735.9 40.4 520 32.8 630 2.8 740.6 45 3.7 525 36.0 635 9.9 745.4 420 8.5 530 38. 640 8.2 750.2 425 6.5 535 39.5 645 6.6 755. 430 28. 540 40.4 650 5.0 760.0 435 45. 545 40.8 655 3.5 765 0.8 440 69.0 550 4. 660 2.2 770 0.7 445 80.3 555 4.0 665 0.9 775 0.6 450 6.4 560 4.0 670 9.7 780 0.6 455 36.7 565 40.6 675 8.6 785 0.5 460 22.9 570 40. 680 7.6 790 0.4 465 4.6 575 39.2 685 6.8 795 0.4 470 9.2 580 38.3 690 6.0 800 0.4 475 6.5 585 37.6 695 5.2 805 0.4 480 5.2 590 36.4 700 4.7 80 0.3 485 5. 595 34.6 705 4. 85 0.3 * Infrmatin frm Cree Services Evaluatin Reprt r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin. 2
Illuminance* 25-watt mdule, 2x2-inch, 44, 5500K Cree LEDs Sample mdule was measured n a type C gniphtmeter and illuminance measurements were calculated frm the IES-63 electrnic fi le using Phtmetrics Pr sftware. The results are shwn belw. * Infrmatin frm Cree Services Evaluatin Reprt Illuminance at a Distance Center Beam LUX Beam Width 0.2M 0.3M 0.5M 0.7M 0.8M 27,770.40 LUX 6,942.60 LUX 3,085.60 LUX,735.65 LUX,0.82 LUX 0.6M.M.7M 2.2M 2.8M 7.40 LUX 3.3M.0M Vert. Spread: 7.6 Hriz. Spread: 7. 0.5M.M.6M 2.2M 2.7M 3.3M 2 Islux Plt 0 0 500 LUX 250 LUX 25 LUX 62.5 LUX 30 LUX 5 LUX 50% Max Candela Munt height: M Ttal LLF: Distance in units f munt height 2 r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin. 3
4000K LED Mdule Descriptin: Size, Quantity f LEDs, Pwer, Brightness Vltage Dimming CRI: (R4) 84 ~6 x 6 x 0.28-in, 36 LEDs, 6-watts, 60 lm ~6 x 6 x 0.28-in, 49 LEDs, 8-watts, 830 lm ~2 x 2 x 0.28-in, 44 LEDs, 25-watts, 2440 lm ~2 x 2 x 0.28-in, 96 LEDs, 33-watts, 3330 lm 24-vdc [Cnstant Vltage] Pulse Width LED dimmer Clr (Kelvin): ~4000K +/- 200 LED Luminescent Maintenance L 70 Cnstructin: Weight (z): 6x6-inches 2x2-inches Certifi catin We Use Per IES TM-2-20 23,000- hurs t a 30% decrease in brightness Aluminum Printed circuit bard, Cree LEDs ~ 4 ~ 5 UL Recgnized Cmpnant, File # E358479 Manufactured in the United States [imprted Cmpnents] by US Slid State, LLC., Shreveprt, Luisiana r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin. 4
Typical Phtmetric Data 4000K 50.00 Spectral Distributin 00.00 50.00 0.00 400.00 500.00 600.00 (nm) 700.00 Measured Spectral Pwer Distributin Wavelength (nm) Nrmalized-00* Wavelength (nm) Nrmalized-00* 382.5 0.00 58.4 99.90 387.6 0.00 590.9 00.00 396.2 0.00 600.7 97.85 406.7 0.3 60.4 93.9 47.4 3.89 620.0 89.00 428.0 7.08 629.5 82.90 438.5 47.75 639.0 74.80 449. 78.39 648.5 65.70 459.6 70.3 657.9 56.40 470.0 38.33 667.3 47.88 480.4 2.26 676.6 40.08 490.7 9.37 685.7 33. 50.0 29.2 694.8 26.70 5.2 46.44 704.0 2.33 52.3 64.3 73. 6.87 53.5 77.86 722.0 3.52 54.5 86.8 730.9 9.85 55.4 93.6 739.9 7.4 56.5 97.02 748.7 5.69 57.6 98.88 757.6 4.9 * Spectral data are displayed nrmalized t a maximum value f 00.00 Knica Minlta CS-200 r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin. 5
Red, Green, Blue LED Mdule Descriptin: Size, Quantity f LEDs Pwer, Brightness, ~6 x 6, 36 LEDs / 49 LEDs Pwer, Brightness, ~2 x 2, 44 LEDs / 96 LEDs Vltage Dimming Clr: LED Luminescent Maintenance L 70 Cnstructin: Weight (z): 6x6-inches 2x2-inches Certifi catin We use ~6 x 6 x 0.28-in, 36 LEDs ~6 x 6 x 0.28-in, 49 LEDs ~2 x 2 x 0.28-in, 44 LEDs ~2 x 2 x 0.28-in, 96 LEDs Red, 5-watts, 846 lm / 2-watts, 50 lm Green, 2-watts, 964 lm / 29-watts, 33 lm Blue, 25-watts, 500 lm / 34-watts, 680 lm Red, 60-watts, 3384 lm / 82-watts, 4606 lm Green, 84-watts, 3859 lm / 4-watts, 5252 lm Blue, 00-watts, 2000 lm / 36-watts, 2724 lm 24-vdc [Cnstant Vltage] Pulse Width LED dimmer ~Red Wavelength-630 ~Green Wavelength-535 ~Blue Wavelength-485 60,000- hurs t a 30% decrease in brightness Aluminum Printed circuit bard ~ 4 ~ 5 UL Recgnized Cmpnant, File # E358479 Manufactured in the United States [imprted Cmpnents] by US Slid State, LLC., Shreveprt, Luisiana r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin. 6
Typical Phtmetric Data Red 50.00 Red Spectral Distributin 00.00 50.00 0.00 400.00 500.00 (nm) 600.00 700.00 Measured Red Spectral Pwer Distributin Wavelength (nm) Nrmalized-00* Wavelength (nm) Nrmalized-00* 382.5 0.3 58.4.08 387.6 0.04 590.9 3.0 396.2 0.03 600.7 8.68 406.7 0.03 60.4 22.88 47.4 0.02 620.0 54.5 428.0 0.02 629.5 97.46 438.5 0.02 639.0 00.00 449. 0.02 648.5 53.98 459.6 0.02 657.9 3.65 470.0 0.02 667.3 2.93 480.4 0.0 676.6 0.75 490.7 0.0 685.7 0.24 50.0 0.02 694.8 0. 5.2 0.02 704.0 0.07 52.3 0.02 73. 0.06 53.5 0.02 722.0 0.02 54.5 0.02 730.9 0.02 55.4 0.04 739.9 0.02 56.5 0. 748.7 0.05 57.6 0.36 757.6 0.05 * Spectral data are displayed nrmalized t a maximum value f 00.00 Knica Minlta CS-200 r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin. 7
Typical Phtmetric Data Green 50.00 Green Spectral Distributin 00.00 50.00 0.00 400.00 500.00 (nm) 600.00 700.00 Measured Green Spectral Pwer Distributin Wavelength (nm) Nrmalized-00* Wavelength (nm) Nrmalized-00* 382.5 0.2 58.4 5.37 387.6 0.05 590.9 2.93 396.2 0.04 600.7.60 406.7 0.03 60.4 0.9 47.4 0.04 620.0 0.55 428.0 0.07 629.5 0.34 438.5 0.2 639.0 0.23 449. 0.25 648.5 0.5 459.6 0.7 657.9 0. 470.0 2.32 667.3 0.08 480.4 7.09 676.6 0.07 490.7 9.76 685.7 0.06 50.0 46.77 694.8 0.05 5.2 82.39 704.0 0.05 52.3 00.00 73. 0.03 53.5 85.53 722.0 0.03 54.5 57.67 730.9 0.03 55.4 34.38 739.9 0.04 56.5 9.03 748.7 0.06 57.6 0.09 757.6 0.04 * Spectral data are displayed nrmalized t a maximum value f 00.00 Knica Minlta CS-200 r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin. 8
Typical Phtmetric Data Blue 50.00 Blue Spectral Distributin 00.00 50.00 0.00 400.00 500.00 (nm) 600.00 700.00 Measured Blue Spectral Pwer Distributin Wavelength (nm) Nrmalized-00* Wavelength (nm) Nrmalized-00* 382.5 0.20 58.4 0.09 387.6 0.07 590.9 0.07 396.2 0.05 600.7 0.06 406.7 0.07 60.4 0.05 47.4 0.23 620.0 0.04 428.0.60 629.5 0.03 438.5 8.22 639.0 0.03 449. 32.20 648.5 0.02 459.6 78.39 657.9 0.04 470.0 00.00 667.3 0.04 480.4 68.39 676.6 0.03 490.7 3.33 685.7 0.03 50.0 2.85 694.8 0.04 5.2 5.8 704.0 0.04 52.3 2.8 73. 0.03 53.5 0.97 722.0 0.02 54.5 0.49 730.9 0.00 55.4 0.28 739.9 0.00 56.5 0.9 748.7 0.00 57.6 0.4 757.6 0.00 * Spectral data are displayed nrmalized t a maximum value f 00.00 Knica Minlta CS-200 r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin. 9
LED Lifetime Estimate (per TM-2)* IESNA TM-2-, Prjecting Lng Term Lumen Maintenance f LED Light Surces is a newly develped Technical Memrandum which prvides recmmendatins fr prjecting lng term lumen maintenance f LEDs using data btained when testing per IESNA LM-80-08, IES Apprved Methd fr Measuring Lumen Maintenance f LED Light Surces. The TM-2 standard prvides an industry-wide standard and cnservative methd n which t base lumen maintenance f LEDs. Using TM-2, a prjected L 70 value can be n greater than six times the actual test duratin f the LM-80 data sets. The TM-2 prjectins represent the anticipated lumen maintenance f the LEDs and des nt accunt fr reliability f all f the ther cmpnents f the luminaire r f the luminaire as a system. Cree, currently has published 6048 hurs f LM-80 n the XLamp ML-B White where If = 80mA and Tsp = 85 C. When using the TM-2 methd t determine lumen maintenance f the ML-B based n a measured Tsp f 40 C, the reprted L70 is 36,300 hurs. This prjectin is limited by the 6X rule as defi ned in TM-2. This methd als allws lumen maintenance fr ther L-values t be calculated. In this case, at 32,600 hurs the calculated lumen maintenance will be 9 percent. * Infrmatin frm Cree Services Evaluatin Reprt % Luminus Flux Time (hurs) Chart TM-2 : TM Prjectin - 2 Prjectin fr ML-B fr at 85 - B at C 85ºC and and 80mA r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin. 0
Electrical Cnnectins DC pwer can be supplied t the mdule at any f the Wag #2060 push buttn cnnectrs. The psitive [+] side f the cnnectr is marked with a [+] Imprtant: Always nte plarity f each terminal blck when making electrical cnnectins. T release tensin n the wire, gently press dwn, as shwn. T much pressure will damage the cnnectr. Mdules are easily cnnected t each ther with 8 AWG wire. Slid cpper wire is easier t insert int the terminal blck than stranded. Remve abut 5/6-inch f the insulatin and insert int the cnnectrs, as shwn. The ttal lad n any single cnnectr shuld nt exceed 6 amps, r 44-watts. Imprtant: Always nte plarity f terminal blck when making electrical cnnectins. r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin.
Electrical Wiring Example Wiring Diagram - LED Mdule, Cntractr Pack This is ne example f the many ways ur LED mdules can be electrically cnnected t each ther. T calculate the needed pwer supply size, fi nd the ttal pwer (watts) fr all the panels t be cnnected t the pwer supply and add 20%. Fr example- 0 mdules x 25 watts = 250 watts + 20% = 300 watts r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin. 2
Mdule Detail 96 LEDs r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin. 3
Mdule Detail 44 LEDs r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin. 4
Mdule Detail 49 LEDs r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin. 5
Mdule Detail 36 LEDs r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin. 6
Cutting Instructins r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin. 7
UL 8750 Cmpnent Why use a UL Cmpnent? End-prduct manufacturers may eliminate redundant testing and surveillance fr the cmmercially available cmpnents used in their prducts. UL's cmpnent certifi catin prgrams als add cnfi dence t supply chain integrity by having the cmpnent testing and surveillance cnducted where the cmpnents are manufactured. Using UL certifi ed cmpnents during prductin helps reduce csts and time t market. Because the cmpnents have already been fund t be in cmpliance with the applicable cmpnent requirements, cstly redesign issues that may be identifi ed during the certifi catin prcess relating t cmpnents can be minimized. LED Mdules manufactured by US Slid State, LLC are a UL cmpnent, when marked with UL fi le number, E358479. These mdules have been tested and are cmpliant with UL8750 standards. A cmpnent is a part intended fr use in manufacture f a fi nished prduct. The fi nished prduct will require fi nal UL testing. UL 8750 Standard fr Light Emitting Dide (LED) Equipment fr Use in Lighting Prducts Scpe. These requirements cver LED equipment that is an integral part f a luminaire r ther lighting equipment and which perates in the visible light spectrum between 400-700 nm. These requirements als cver the cmpnent parts f light emitting dide (LED) equipment, including LED drivers, cntrllers, arrays, mdules, and packages as defi ned within this standard..2 These lighting prducts are intended fr installatin n branch circuits f 600 V nminal r less in accrdance with the Natinal Electrical Cde (NEC), ANSI/NFPA 70, and fr cnnectin t islated (nn-utility cnnected) pwer surces such as generatrs, batteries, fuel cells, slar cells, and the like..3 LED equipment is utilized in lighting prducts that cmply with the end-prduct standards listed belw. The requirements in this standard are intended t supplement thse in ther end-prduct standards. Included are: 2 a) Electric Signs, UL 48, b) Prtable Electric Luminaires, UL 53, c) Underwater Luminaires and Submersible Junctin Bxes, UL 676, d) Emergency Lighting and Pwer Equipment, UL 924, e) Stage and Studi Luminaires and Cnnectr Strips, UL 573, f) Track Lighting Systems, UL 574, g) Luminaires, UL 598, h) Direct Plug-In Nightlights, UL 786, i) Lw Vltage Landscape Lighting Systems, UL 838, j) Self-Ballasted Lamps and Lamp Adapters, UL 993, k) Luminus Egress Path Marking Systems, UL 994, and l) Lw Vltage Lighting Systems, UL 208. UL.cm 2 https://services.ul.cm/service/cmpnent-certificatin/ r may nt be accurate r apprpriate fr yur applicatin. It is the sle respnsibility f the end user t determine the suitability f the prduct fr their applicatin. 8