The evolution of fine sanding The new range of ETS 150 random orbital sanders 30-day money back guarantee - no questions asked! No Compromises!
ETS Random Orbital Sanders New and proven features at a glance Australia s market leader - further improved! What started with the ES2E 10 years ago as a reliable, superbly balanced super-finishing sander, found its successor in the weight-optimised family of the ES 150/3 and ES 150/5. Thanks to a lot of positive input by our Australian customers, we have been able to further improve handling and robustness with the new ETS 150. Robust design The new, reinforced top cap protects the electronics and reduces the danger of breakage if the tool is dropped. Softgrip Better handling. Solid connection Plug-it system for quick and reliable cable change Constant speed Speed control allows the right speed for the right application - always. Pad brake No deep scratch marks due to an over-speeding pad, thanks to the automatic pad brake Dust extraction Better finishing quality and a healthier working environment without sanding brake Less vibration Extremely low vibration, thanks to the internal balancing system and Festool Jetstream pad. with sanding brake 3 year warranty: even on bearings The ETS has new double-row bearings, with 3 shields against dust. Long life guaranteed. Jetstream sanding pad The patented Festool Jetstream sanding pad increases abrasive life by 30% and significantly increases dust extraction efficiency
Application Product finish 2 specialists, same features Sanding technology that saves money Perfectly balanced with improved handling. Festool offer you the choice: ETS 150/5 EQ coarse and intermediate sanding: grit P40-P180 ETS 150/3 EQ intermediate to superfine sanding: grit P220-P1200. Don t compromise by getting a duo action sander, as you have to carry 50% more weight all the time! Jetstream One more hole in the centre and two air ducts prevent a dust extractor from overloading - no clogging of the pad. The patented Jetstream system used with dust extraction reduces the heat generated when sanding. without Jetstream 1.8kg - no-one is lighter with Jetstream Ergonomics that others can only copy New soft pad* designed for sanding mainly on the edge of the pad with grits P40-P220 (*available as an accessory) Temperature after sanding for 2 minutes with the Jetstream system Temperature after sanding for 2 minutes with a conventional 6-hole system
Sanding Systems - not just tools Good tools need good abrasives to achieve optimum results. Festool has the right abrasive paper for each and every application: Stickfix adhesive coating for rapid change and repeated use Dust repellent coating to prevent clogging Heat resistant, reinforced bonding for good adhesion and resistance against grit breakage High quality synthetic grit for good sanding capacity Flexible, high-strength support material Abrasive type Application/grit Materials High performance abrasives for paint and varnish. Preliminary, intermediate and final sanding. P 40 - P 400 P 600 - P1200 Paint and varnish - acrylic paint, nitro-cellulose paint, undercoat Filler, fine filler and polyester filler Thermoplastic and fibre-reinforced plastics Undercoats, fillers, protective varnish, primers High performance abrasives for wood. Preliminary and intermediate sanding for joiners, carpenters and painters in the woodworking and furniture industries. P 24 - P180 High performance abrasives for repair compounds, fillers and paintwork. Preliminary, intermediate and final sanding. P 80 - P 500 P 800 - P1500 Hardwoods Softwoods Tropical woods Wood composites Varnishes, paints, nitro-cellolose paints Old films of varnish, primed woods Filling materials, synthetic resin, nitro, thick-layer and combination fillers, priming filler Primers, reaction primers 2-pack materials Light sanding/matt sanding of varnish before repainting High performance abrasives for extreme conditions. P 24 - P 120 High performance abrasives for light sanding, roughening, cleaning, degreasing and matting. A 120 A 280 S 800 High performance abrasives for finishing before polishing. P 600 - P 1200 Sanding off thick coatings and paints from hard surfaces (concrete, facades, steel etc) Sanding reinforced concrete and fibre-reinforced plastics (GfK, CfK etc); well-set fillers; heavily worn stairs Fine sanding of bare, roughed metal surfaces Deburring, removing rust, descaling Removing oxidation (efflorescence) from light alloys Polishing non--ferrous/heavy metals Polishing solder points and transitions of welded sections Natural woods, pore deep cleaning of veneered and glazed surfaces Lightly sanding old coats of paint before repainting Finish polishing from grit 600 for Polymer materials such as Corian, Varico r, Cristalan Acrylic glass, Plexiglas DD high-gloss paints Stickfix abrasive sheets P Qty in pack Order no. 40 50 486 400 60 50 486 401 80 50 486 402 100 100 486 403 120 100 486 404 150 100 486 405 180 100 486 406 220 100 486 407 240 100 486 408 320 100 486 409 400 100 486 410 600 100 486 997 800 100 486 998 1200 100 486 999 P Qty in pack Order no. 24 50 486 392 36 50 486 393 50 50 486 394 80 50 486 395 100 50 486 396 120 50 486 397 150 50 486 398 180 50 486 399 50 5 489 482 80 5 484 107 100 5 489 483 120 5 489 484 Mix 1) Mixed pack contains the following grits: 5 x Brilliant 80 / 5 x Titan 80 / 10 x Titan 120 / 10 x Titan 180 / 10 x Titan 320 / 10 x Titan 360 Mix 2) Mixed pack contains the following grits: 10 x Titan 800 / 30 x Titan 1200 / 40 x Titan 1500 P Qty in pack Order no. 80 50 487 591 100 100 487 592 120 100 487 593 150 100 487 594 180 100 487 595 220 100 487 596 240 100 487 597 280 100 488 234 320 100 487 598 360 100 488 235 400 100 487 599 500 100 488 744 800 100 489 351 1200 100 (unperforated) 489 352 1500 100 (unperforated) 489 353 Mix 1) 50 489 528 Mix 2) 100 (Finish) 489 179 Seen at Ideal Tools. L Qty in pack Order no. 24 25 486 388 36 25 486 389 50 25 486 390 80 25 486 390 100 25 491 357 L Qty in pack Order no. A 100 5 (unperforated) 482 778 A 280 5 (unperforated) 482 779 S 800 5 (unperforated) 482 780 L Qty in pack Order no. A 100 5 (unperforated) 482 778 A 280 5 (unperforated) 482 779 S 800 5 (unperforated) 482 780
ETS 150/3 Sanding pads The right pad for the right application ST-STF-D150/8-M8, hard for sanding flat surfaces such as tabletops, with only a little edge-sanding Order no. 484850 3year warranty * ST-STF-D150/8-M8 W, soft universal pad for flat and slightly vaulted surfaces Order no. 486381 - Finishing sander with 3mm sanding stroke - Suitable for grit range P220-P1200 - Secure handling with Softgrip - High degree of security with sanding pad brake SY-STF-D150/8-M8 W-HT, soft HT special pad for aggressive sanding applications up to P220, with regular sanding on the edge of the pad Order no. 491935 with electronics Scope of delivery: Stickfix sanding pad 150, 1 Stickfix abrasive, filter cartridge, operating tool ES 150/3 EQ-Plus In a Systainer Order no. 571549 Power consumption Speed Working strokes Sanding stroke Changeable sanding shoe Connection dust extraction Weight ES 150/3 EQ In a box Order no. 571548 310W 4000-10000 min-1 8000-20000 min-1 3mm STF 150mm 27 mm 1.8 kg ES 150/3 EQ-C In a box Order no. 571552 ST-STF-D150/8-M8 SW, supersoft for sanding curved or uneven surfaces - ideal for car-refinishing Order no. 486381 Interface pad IP-STF-D145/8-STF/2 damping element between (Titan) abrasive and sanding pad, for super-finish sanding only Order no. 484850 ETS 150/5 Dust extraction year 3warranty * 3year warranty * - 5mm sanding stroke - Suitable for grit range P40-P180 - Electronic speed control - Sanding pad brake and Softgrip with electronics Scope of delivery: Stickfix sanding pad 150, 1 Stickfix abrasive, filter cartridge, operating tool ES 150/3 EQ-Plus In a Systainer Order no. 571551 Power consumption Speed Working strokes Sanding stroke Changeable sanding shoe Connection dust extraction Weight ES 150/3 EQ In a box Order no. 571550 310W 4000-10000 min-1 8000-20000 min-1 5mm STF 150mm 27 mm 1.8 kg Investing in a CT dust extractor not only provides a healthy workplace, but also saves you money by - saving 30% of abrasives costs - saves clean-up time - reduces sanding re-work Contact your Festool Partner Dealer for a demonstration of the CT range of dust extractors! There s one for every application. Seen at Ideal Tools.
The Festool System * 3 year warranty Long service life - guaranteed! Every Festool tool comes with a 12 month warranty, extended to 3 years simply by completing the warranty form that comes with the tool and sending it to Festool Head Office (your Festool Partner Dealer can assist you with this at the point of purchase). You will then receive a warranty registration certificate that will cover repair parts and labour, should the tool require them, for 3 years from the date of purchase. What could be easier? www.festool.com.au 30-day money back guarantee - no questions asked! If for any reason you do not wish to keep your ETS 150 eccentric sander, simply return it to dealer where you purchased the tool together with your invoice, within 30 days of the date of purchase. Your Festool dealer will refund your $money in full. What could be fairer? FESTOOL TTS Tooltechnic Systems (AUST) P/L 63-65 Quantum Close Dandenong South VIC 3175 Phone +0061 (0) 3 9799-9733 Fax +0061 (0) 3 9799-9766 Service Hotline: 1800 063 900 email: festool@festool.com.au ABN: 85 090 458 576 All images are for illustrative purposes only. All rights reserved. No Compromises!