DOREL ASIA FULL/QUEEN WOOD HEADBOARD Model No.: UPC CODE: 0-65857-15661-4 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot number: (TAKEN FROM CARTON) Date of purchase: / / DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge. Tel # : 1-800-295-1980 E-Mail: das@dorel.com Fax #: 514-353-7819
CUSTOMER SERVICE If you are missing parts or have any questions about this product, contact our customer service representative first! CALL 1-800-295-1980 You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed description of the part. Customer Service Department No. 413 12345 Albert-Hudon Boulevard, Suite 100 Montreal, Quebec Canada H1G 3L1 E-MAIL: das@dorel.com NOTES * Ensure all parts and components are present before beginning assembly. * Assemble on a soft, smooth surface to prevent damage to the product finish. * Read all instructions before use. * DO NOT use power tools. * CAUTION: Adult assembly required. * Assembly may require two people. * Estimated assembly time: 10 minutes. NOTE: THE BED FRAME IS NOT INCLUDED AND MUST BE PURCHASED SEPARATELY. CARE AND CLEANING Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish. Excessive exposure to sunlight and extreme changes in temperature and moisture can damage wood furniture. MAINTENANCE Check bolts/screws periodically and tighten them if necessary. LIMITED WARRANTY Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers 1 year from the date of original purchase. This warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way. This warranty gives you specific legal rights and you may also have other rights which vary from State to State. WARNING: Should this product become damaged, and/or components are broken or missing, DO NOT USE.
FULL/QUEEN WOOD HEADBOARD HEADBOARD ASSEMBLY HARDWARE HARDWARE LIST LIST 1/4" x 100mm JOINT CONNECTOR BOLT (4mm HEX HEAD) 3mm x 32mm METAL DOWEL 2 PCS 10mm x 50mm HEX KEY JOINT CONNECTOR BOLT (4mm HEX HEAD) OPEN-END END WRENCH 1/4" x 10mm LOCKNUT 1 6mm x 16mm x 1.2mm WASHER
PARTS LIST FULL/QUEEN WOOD HEADBOARD LEFT HEADBOARD POST RIGHT HEADBOARD POST CYLINDER TOP TOP & CENTER & CROSS RAIL 2 PCS BOTTOM CROSS RAIL WIDE HEADBOARD SLAT NARROW HEADBOARD SLAT 2
FULL/QUEEN WOOD HEADBOARD STEP 1 Insert stoppers (5) into the holes of top cross rail (D) as shown. Insert wide headboard slat (F) and narrow headboard slats (G) into the holes of center cross rail (D). Push headboard slats (F & G) into the holes of top cross rail (D) to secure them in place. 3
STEP 2 FULL/QUEEN WOOD HEADBOARD Insert metal dowels (2) into the ends of cylinder (C). Insert wood dowels (3) into the ends of top & center cross rails (D) and bottom cross rail (E). Attach rails (D & E) and cylinder (C) to left headboard post (A) and secure using bolts(1). Use hex key (4) to tighten the bolts (1). 4
FULL/QUEEN WOOD HEADBOARD STEP 3 Attach right headboard post (B) to cylinder (C) and rails (D & E) using bolts (1). Use hex key (4) to tighten the joint connectors (1). You finished assembling your headboard. 5
FULL/QUEEN WOOD HEADBOARD 1/4" x 100mm NOTE: THE 1/4" BED x FRAME 100mm IS NOT INCLUDED JOINT CONNECTOR AND MUST (4mm HEX BE PURCHASED 3mm HEAD) x 32mm JOINT SEPARATELY. CONNECTOR THE (4mm BELOW HEX ILLUSTRATION HEAD) IS FOR REFERENCE METAL ONLY. DOWEL 2 PCS * This headboard has mulitple mounting holes to accommodate the various styles of bedframes available in the retail market. * Please refer to the following illustrations to properly attach the bed frame to the headboard. 10mm x 50mm FULL SIZE BED ASSEMBLY: 10mm x 50mm To use the headboard as a full size bed, attached the bed frame (not included) to the inner posts of HEX KEY the headboard using bolts 6 (6), PCS washers (9), and locknuts (8). Use hex key (4) to install bolts (6) and open-end wrench (7) HEADBOARD to tighten locknuts ASSEMBLY (8). HARDW 1/4" x 100mm 10mm x 50mm OPEN END WRENCH 8 9 1/4" x 10mm LOCKNUT 6 1/4" x 10mm LOCKNUT 6mm x 16mm x 1.2mm WASHER 6
1/4" x 100mm FULL/QUEEN WOOD HEADBOARD JOINT CONNECTOR (4mm HEX 3mm HEAD) x 32mm METAL DOWEL 2 PCS NOTE: THE BED FRAME IS NOT INCLUDED AND MUST BE PURCHASED SEPARATELY. THE BELOW ILLUSTRATION IS FOR REFERENCE ONLY. 10mm x 50mm QUEEN SIZE BED 10mm ASSEMBLY: x 50mm To use the headboard as a Queen size bed, attached the bed frame (not included) to the outer posts of HEX KEY the headboard using bolts 6 (6), PCS washers (9), and locknuts (8). Use hex key (4) to install bolts (6) and open-end wrench (7) HEADBOARD to tighten locknuts ASSEMBLY (8). HARDW 1/4" x 100mm 10mm x 50mm OPEN END WRENCH 8 9 1/4" x 10mm LOCKNUT 6 1/4" x 10mm LOCKNUT 6mm x 16mm x 1.2mm WASHER 7
FULL/QUEEN WOOD HEADBOARD CAUTION: This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the maximum weights indicated may result in instability or cause possible injury. Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish. Excessive exposure to sunlight and extreme changes in temperature and moisture can damage wood furniture. That's it! You've finished assembling your Wood Headboard. DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge. 7 NEED HELP! Tel #: 1-800-295-1980 CALL E-Mail: das@dorel.com US FOR ASSIS Fax #: 514-353-7819 1-800-295-1980 DO NOT RETURN P
MODEL #: B A B E C B D Customer Service PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S). Customer Service Phone Number 1-800-295-1980 Customer Service Fax Number 514-353-7819 Email: das@dorel.com Request Date: Name: Shipping Address: Street & Number: City & State: Zip Code: Day Time Phone Number: (including area code) Date & Place of Purchase: Part(s) description and quantity: (Please be sure to list model number or SKU number) Customer Service Representative Mailing Address: Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1