QFP/TQFP - 64 Pins (10x10) 0.5mm pitch Withstanding Voltage: 100V eff Solvent Durability: Freon Part Number (Details) IC149-064 - *69 - B5 B5 = Au over Ni Not available Detail C 10mm x 10mm N1 Detail B N1: Metal soldering Tab Clip. Socket may be stabilized by soldering (Reflow) in these 4 areas.
QFP/TQFP - 64 Pins (16x16) 0.5mm pitch Withstanding Voltage: 100V eff Solvent Durability: Freon Part Number (Details) IC149-064 - *75 - B5 B5 = Au over Ni ICP-064-6 10.70 x 10.70 14.80 13.200 Detail C 10.4mm x 10.4mm N1 Detail B N1: Metal soldering Tab Clip. Socket may be stabilized by soldering (Reflow) in these 4 areas.
IC149 / ICP Series Emulation-Adapter (64 pins) Withstanding Voltage: 700V AC Adapter Part Number ICP-064-6 Compatible Socket (Part No.) IC149-64-075-B5 (w/o pos. pins) IC149-64-175-B5 (with pos. pins) Housing: PTES, glass filled UL94V-0 Contact: Phosphor Bronze Plating: Au 0.3µm min. over 2.5 ~ 4.5µm Ni Outline Adapter Dimensions (Reference Only) 2.4 8.08 17.00 25.53 2. Careful attention must be taken when fixing the Adapter, since it is made from thermoplastic material. By exceeding the maximum torque a perfect performance can no longer be guaranteed. Adapter PCB-Layout (IC149-64-*08-B5) Top View from Soldering Side
QFP/TQFP - 64 Pins (16x16) 0.8mm pitch Withstanding Voltage: 100V eff Solvent Durability: Freon Part Number (Details) IC149-064 - *08 - B5 B5 =Au over Ni ICP-064-2 26.00 26.00 16.40 x 16.40 10.10 8.50 0.8 17.2 14.0 17.2 14.0 14mm x 14mm N3 2.15 Coding 15.6 15.6 N4 0.35 0.15 N3: These holes are only necessary for use with positioning pins. N4: The Socket may be glued to the PC Board within this area.
IC149 / ICP Series Emulation-Adapter (64 pins) Withstanding Voltage: 700V AC Adapter Part Number ICP-064-2 Compatible Socket (Part No.) IC149-64-008-B5 (w/o pos. pins) IC149-64-108-B5 (with pos. pins) Housing: PTES, glass filled UL94V-0 Contact: Phosphor Bronze Plating: Au 0.3µm min. over 2.5 ~ 4.5µm Ni Outline Adapter Dimensions (Reference Only) 2.4 28.00 6.20 28.00 15.00 25.53 2. Careful attention must be taken when fixing the Adapter, since it is made from thermoplastic material. By exceeding the maximum torque a perfect performance can no longer be guaranteed. 15.00 25.53 Adapter PCB-Layout (IC149-64-*08-B5) Top View from Soldering Side Note: No conduits within this hatched area.
QFP/TQFP - 64 Pins (13x19) 1.0mm pitch Insulation Resistance: Withstanding Voltage: Contact Resistance: Operating Temp. Range: Reflow-soldering Temp.: Solvent Durability: 500MΩ at 150V DC 100V eff 30mΩ max. at 10mA and 20mV -25 C to +85 C 220 C for 60 seconds Freon Extra Feature: Clipped Cover 30.15 Part Number (for IC-use) IC149-064 - *01 - B5 B5 = Au over Ni not available 23.65 23.70 x 17.00 8.60 23.6 ~ 26.1 1.0 20.0 17.6 ~ 20.1 14.0 14mm x 20mm N1 3.05 max. N2 N3 22.9 17.0 N4 0.35 0.15 N1: Metal soldering Tab Clip. Socket may be stabilized by soldering (Reflow) in these 4 areas. N2:These holes are only necessary when fixing the Socket with screws. N3: These holes are only necessary for use with positioning pins. N4: The Socket may be glued to the PC Board within this area.