Schottky Rectifier, 5 A 50SQ... Series DO-204AR PRODUCT SUMMARY I F(AV) V R Cathode 5 A 60/80/00 V Anode FEATURES 75 C T J operation Low forward voltage drop High frequency operation RoHS COMPLIANT High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Guard ring for enhanced ruggedness and long term reliability Lead (Pb)-free plating Designed and qualified for industrial level DESCRIPTION The 50SQ... axial leaded Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 75 C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES UNITS I F(AV) Rectangular waveform 5 A V RRM Range 60 to 00 V I FSM t p = 5 µs sine 900 A V F 5 Apk, T J = 25 C 0.52 V T J Range - 55 to 75 C VOLTAGE RATINGS PARAMETER SYMBOL 50SQ060 50SQ080 50SQ00 UNITS Maximum DC reverse voltage V R Maximum working peak reverse voltage V RWM 60 80 00 V ABSOLUTE MAXIMUM RATINGS load PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum average forward current See fig. 5 I F(AV) 50 % duty cycle at T C = 9 C, rectangular waveform 5 Maximum peak one cycle 5 µs sine or 3 µs rect. pulse Following any rated 900 A non-repetitive surge current I FSM condition and with rated See fig. 7 0 ms sine or 6 ms rect. pulse V RRM applied 290 Non-repetitive avalanche energy E AS T J = 25 C, I AS =.0 A, L = 5 mh 7.5 mj Current decaying linearly to zero in µs Repetitive avalanche current I AR Frequency limited by, T J maximum V A =.5 x V R typical.0 A Document Number: 93355 For technical questions, contact: diodes-tech@vishay.com www.vishay.com Revision: 2-Aug-08
50SQ... Series Schottky Rectifier, 5 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum forward voltage drop See fig. Note () Pulse width < 300 µs, duty cycle < 2 % V FM () 5 A 0.66 T J = 25 C 0 A 0.77 5 A 0.52 T J = 25 C 0 A 0.62 Maximum reverse leakage current T J = 25 C 0.55 I RM See fig. 2 V R = Rated V R T J = 25 C 7 ma Maximum junction capacitance C T V R = 5 V DC, (test signal range 00 khz to MHz) 25 C 500 pf Typical series inductance L S Measured lead to lead 5 mm from body 0 nh Maximum voltage rate of change dv/dt Rated V R 0 000 V/µs V THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum junction and storage temperature range T J, T Stg - 55 to 75 C Maximum thermal resistance, junction to lead Typical thermal resistance, junction to air Approximate weight Marking device R thjl DC operation; see fig. 4 /8" lead length R thja 44 Case style DO-204AR (JEDEC) 8.0 C/W.4 g 0.049 oz. 50SQ060 50SQ080 50SQ00 www.vishay.com For technical questions, contact: diodes-tech@vishay.com Document Number: 93355 2 Revision: 2-Aug-08
Schottky Rectifier, 5 A 50SQ... Series 00 T J= 75 C 00 Reverse Current - I R ( ma) 0 0. 0.0 0.00 50 C 25 C 00 C 75 C 50 C 25 C Instantaneous Forward Current - I F (A) 0 T J= 75 C T J= 25 C T J= 25 C Junction Capacitance - C (pf) T 0.000 0 20 40 60 80 00 Reverse Voltage - V R (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 000 T = 25 C J 0. 0 0.2 0.4 0.6 0.8.2.4.6 Forward Voltage Drop - V FM (V) Fig. - Maximum Forward Voltage Drop Characteristics 00 0 20 40 60 80 00 Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 0 Thermal Impedance Z thjl ( C/ W) D = 0.50 D = 0.33 D = 0.25 D = 0.7 D = 0.08 t 0. t 2 Notes: Single Pulse. Duty factor D = t / t 2 (Therma l Resista nc e) 2. Peak T J = P DM x Z thjl+ TC 0.0 0.0000 0.000 0.00 0.0 0. 0 00 t, Rectangular Pulse Duration (Seconds) P DM Fig. 4 - Maximum Thermal Impedance Z thjl Characteristics = / 8 inch Document Number: 93355 For technical questions, contact: diodes-tech@vishay.com www.vishay.com Revision: 2-Aug-08 3
50SQ... Series Schottky Rectifier, 5 A Allowable Case Temperature - ( C) 75 70 65 60 55 50 = /8 inch R thjl (DC) = 8.0 C/ W DC Average Power Loss - (Watts) 3.5 3 2.5 2.5 0.5 D = 0.08 D = 0.7 D = 0.25 D = 0.33 D = 0.50 RMS Lim it DC 45 0 2 4 6 8 Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current 0 0 2 3 4 5 6 7 8 Average Forward Current - I F(AV) (A) Fig. 6 - Forward Power Loss Characteristics 0000 Non-Repetitive Surge Current - I (A) FSM At Any Rated Load Condition And With Rated V Applied Following Surge RRM 000 00 0 00 000 0000 Square Wave Pulse Duration - t (microsec) p Fig. 7 - Maximum Non-Repetitive Surge Current L D.U.T. IRFP460 High-speed switch Current monitor R g = 25 Ω Freewheel diode 40HFL40S02 + V d = 25 V Fig. 8 - Unclamped Inductive Test Circuit www.vishay.com For technical questions, contact: diodes-tech@vishay.com Document Number: 93355 4 Revision: 2-Aug-08
Schottky Rectifier, 5 A 50SQ... Series ORDERING INFORMATION TABLE Device code 50 S Q 00 TR 2 3 4 5-50 = Current x 0 2 - S = DO-204AR 3 - Q = Schottky Q series 4 - Voltage rating 5 - TR = Tape and reel package (500 pcs) None = Box package (300 pcs) 060 = 60 V 080 = 80 V 00 = 00 V Dimensions LINKS TO RELATED DOCUMENTS http://www.vishay.com/doc?95243 Document Number: 93355 For technical questions, contact: diodes-tech@vishay.com www.vishay.com Revision: 2-Aug-08 5
Legal Disclaimer Notice Vishay Notice The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of International Rectifier s Power Control Systems (PCS) business, which closed in April 2007. Specifications of the products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below. Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. International Rectifier, IR, the IR logo, HEXFET, HEXSense, HEXDIP, DOL, INTERO, and POWIRTRAIN are registered trademarks of International Rectifier Corporation in the U.S. and other countries. All other product names noted herein may be trademarks of their respective owners. Document Number: 9990 www.vishay.com Revision: 2-Mar-07