OUR FOAM & UPHOLSTERY ADHESIVE RANGE Adhesives That Outperform
WHAT IS TENSORGRIP? As far as spray adhesives are concerned, no other product can compare to the strength, tenacity and reliability of TensorGrip. Available in canisters as well as aerosols, TensorGrip s innovative formula breaks down barriers presented by traditional bonding methods with effortless ease. Our adhesive systems eliminate the need to use traditional methods of bonding, that are messy, wasteful and timeconsuming. Because TensorGrip is a spray adhesive you are completely in control of how much glue is used, resulting in an even spray pattern the way you want it without the fuss and inconsistency that comes with using bulk waterbased or solvent adhesives and their respective systems. Our revolutionary adhesive formulas have been proven to almost completely remove the time spent waiting for glue to tack; where traditionally you would be waiting for 25 minutes, TensorGrip can tack off in as little as ONE MINUTE! Not only will TensorGrip speed up your workflow and drastically reduce production time, it is guaranteed to transform the way in which materials are bonded together with noticeably superior results!
OUR FOAM AND UPHOLSTERY ADHESIVE RANGE WHAT SIZES OF TENSORGRIP ARE AVAILABLE? Aerosol Volume: 650ml / 14 oz This convenient 650ml/14oz aerosol is perfect for small applications or for less-frequent users. Small but sticks all the same! Large Volume: 22L Our most popular adhesive container. The 22L canister: the perfect solution for production where ultimate portability is required, yet aerosols are too small. Intermediate Volume: 108L The 108L intermediate remains portable, but geared toward use in larger-scale production environments. Jumbo Volume: 216L The largest in our range, the 216L jumbo canister is suitable for the largest-scale production applications. Multi-user friendly. THE NEW TENSOR LABELING SYSTEM Choosing the product that is right for the job should never have to be difficult, so Tensor has developed a new labelling system to help make your choosing of the correct adhesive as quick and easy as possible! Each of our aerosol, canister and intermediate labels have been colour coded to correspond to specific markets and also feature icons that denote the specific application or type of use. The following icons show the main areas of application that suit the FOAM & UPHOLSTERY range: Domestic Furniture Mattresses Office Furniture
SUBSTRATE IDENTIFICATION ICONS Brick Carpet Carpet Tile Concrete Cork Fabric Fabric (Thick) Fabric (Thin) Fibreglass Infusion Flexi-Ply Foam FRL FRP/GRP FRP Reefer Liners High Gloss Laminate Insulation MDF Metal/Aluminium Sheeting Plasterboard Plastics Plywood Polystyrene Post Forming PVC Pipe Rubber Standard Laminate Synthetic Leather Timber/Wood Veneers (Natural) Veneers (Paperback) Vinyl Wood Build-ups PRODUCT PROPERTY ICONS Web Spray Pebble Spray Mist Spray Snowflake Spray Bead Application Liquid Resistant VOC California Compliant Low VOC Class-0 Fire Rating Class-1 Fire Rating HAPs Free
OUR FOAM AND UPHOLSTERY ADHESIVE RANGE F30N Non-Flam Pressure Sensitive Adhesive
TensorGrip F30N is a medium pressuresensitive adhesive, offering fast dry and excellent repositionability. This adhesive is the answer for temporary (single sided) or permanent (double sided) bonds especially for porous to non-porous substrates while also being completely non-flammable. Advantages: 100% Non-flammable VOC free Single-sided temporary or double-sided for more permanent bonds Fast dry, very long open time Repositionable Substrates: Properties: Available in:
OUR FOAM AND UPHOLSTERY ADHESIVE RANGE F40 Fast Dry Pressure Sensitive Adhesive
TensorGrip F40 is a highly aggressive adhesive for all demanding foam, fabric, upholstery and carpet applications. F40 is a non-chlorinated, high solids, adhesive in canisters. This adhesive is designed for versatility - super fast drying with a long open time and instant high tack with excellent strength for bonding a wide variety of substrates including foam, fabrics, upholstery, insulation, plywood, MDF and many others. Advantages: Very fast drying Long lasting high tack (pressure sensitive) Moisture and weather-resistant bond Non-chlorinated Will not attack polystyrene Full strength achieve in 24 hours No chlorinated solvents No ODS (ozone depleting substances) Substrates: Properties: Available in:
F40 Fast Dry Pressure Sensitive Adhesive Alternative Opition F70N Non-Flam Aggressive Pressure Sensitive Adhesive F30N Non-Flam Pressure Sensitive Adhesive Alternative Opition F50 Low VOC Contact Adhesive
ADHESIVE APPLICATION F40 Fast Dry Pressure Sensitive Adhesive Alternative Opition F70N Non-Flam Aggressive Pressure Sensitive Adhesive
OUR FOAM AND UPHOLSTERY ADHESIVE RANGE F70N Non-Flam Aggressive Pressure Sensitive Adhesive TensorGrip F70N is a powerful pressuresensitive adhesive developed specifically for pressure-sensitive bonding of porous and somewhat difficult substrates. TensorGrip F70N offers fast dry and high tack while still allowing repositionability and retaining lasting tackiness. Advantages: 100% Non-flammable Aggressive PSA VOC free Fast dry, high tack, long open time 80% of final strength immediately Somewhat repositionable Substrates: Properties: Available in:
F10 Plasticizer Resistant Vinyl Spray Adhesive TensorGrip F10 is a revolutionary, high performance plasticizer resistant adhesive, specially formulated to bond all commonly used substrates found within the foam and upholstery industry. The F10 will bond vinyl, rubber, leathers and plastics, where in the past this has not been possible because of the plasticizer migration from the vinyls causing. Advantages: 100% resistant to delamination caused by plasticiser migration. High temperature resistance up to 311 F. Very Good Green Strength. Will bond many fabrics to difficult substrates. Very high solids. Substrates: Properties: Available in:
OUR FOAM AND UPHOLSTERY ADHESIVE RANGE F32 Foam & Upholstery Spray Contact Adhesive TensorGrip F32 is a fast dry, high tack spray adhesive designed for bonding a variety of common materials used in the foam and upholstery industry. F32 has good temperature resistance and strong bond adhesion on materials including thick and thin fabrics, carpet tiles and foams to core substrates like plywood, MDF and chipboard. Advantages: Good temperature resistance 221 F Excellent initial grab Excellent for cushion making/bull nosing. High integrity bond adhesion on all common foam and upholstery materials Substrates: Properties: Available in:
F50 Low VOC Contact Adhesive TensorGrip F50 is a high solids contact adhesive that effectively bonds a vast range of substrates while maintaining compliance with stringent California VOC requirements (SCAQMD Rule 1168). Advantages: Excellent bonding to porous substrates Agressive - adheres to nearly any surface Good heat resistance (up to 200 F) High-strength, long-term bond Strong initial bond Full strength achieved in 24 hours Low VOC California Compliant (SCAQMD Rule 1168) Substrates: Properties: Available in:
OUR FOAM AND UPHOLSTERY ADHESIVE RANGE F60 High Performance Non- Chlorinated Spray Adhesive TensorGrip F60 is a non-chlorinated, high performance spray adhesive designed for bonding foams, fabrics and upholstery materials to many common core substrates in foam and upholstery applications. High tack properties make this adhesive ideal for bonding thick fabrics and foams and other thick, high demanding materials where good grab and strong bond adhesion are required. Advantages: High Tack Non-chlorinated High integrity bond lines 203 F temperature resistance Substrates: Properties: Available in:
F20 Fast Drying Foam & Upholstery Adhesive TensorGrip F20 has been developed to provide very fast tack times for all upholstery, foam and carpet contact bonding situations. Its high solids and pressure sensitive adhesive technology make this product highly suited for all types of production processes. The F20 is designed to give a long open time and high tack level with good strength for general bond applications. Advantages: Good room temperature bonds Good green strength & heat resistance Strong bond adhesion for various materials; soft fabric, leather, most hard plastic, insulation quilt & slab and carpet to most porous & non-porous substrates such as plywood, MDF, chipboard, etc. Substrates: Properties: Available in:
OUR FOAM AND UPHOLSTERY ADHESIVE RANGE F31 Hi-Temp Foam & Upholstery Spray Adhesive TensorGrip F31 is a high performance spray adhesive developed for demanding foam, fabric, leather and upholstery applications. Its tough curing properties and high temperature resistance give ultra-strong adhesion when working in high-demand, custom upholstery applications. Ensures longevity and excellent, integral bond results. Advantages: Exceptional, tough curing bond lines High temperature resistance 244 F Fine web spray pattern reducing bleed through on thin fabrics Highly controlable spray pattern for varying surface areas Excellent green strength and low odor Substrates: Properties: Available in:
Contact Us If you are looking to place an order or if you require any further information, please get in touch. Call: +1 402 731 3636 E-mail: info.us@quin-global.com Visit: www.tensorglobal.com www.quinglobal.com Quin Global US 5710 F Street Omaha NE 68117 USA
Quin Global US 5710 F Street Omaha, NE 68117 USA www.quinglobal.com www.tensorglobal.com info.us@quin-global.com +1 402 731 3636 B-FCAT Version 03.03.16