mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line Plug (1) Low profile design with the mounting height of.mm () Achieves the multi-harness by the full automatic ID machine in combination with the DF series ID type. (DF series represents the mm pitch single-row product.please refer to page A to A.) (1) Low profile design with mounting height.mm. (Please refer to the application pattern figure on page A for details.) () Provide the contact crimping area with the sufficient space, and secures the stable crimping operation. (1) The board can be connected horizontally or vertically in combination with the straight header with the right angle header. () For horizontal connection, the board to board size is the low profile of.mm. (Please refer to the application pattern on page A for details.) () Compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and the cable side to the plug in the board to cable connection. (1) The board pre-fixed kink is treated with the post pin. () The style employs a scoop-proof and sturborn box type. () The type corresponding to SMT is avilable, using the heat-proof resin. This SMT header is equipped with the metal tab to prevent peeling in the solder joint area. (1) The crimping in-line plug consits of two types, one type, which has pursued after space merits, and the other employs the panel lock type, which can be fixed to the panel. () The in-line adapter is available to insert and in-line the ID socket from both sides. Applications Business equipment such as copy machine and printer A
BEmbossed Carrier Tape Dimensions Product Type Size Number of Contacts A B C D to.. DF/D-*P-H to... to 0... to... BPrecautions 1. Recommended Temperature Profile (SMT) Note1: Maximum twice action is allowed under the same condition. However, the interval between the first and second actions must be maintained at room temperature. Note: The temperature indicates the board surface temperature on the connector lead area.. Recommended Manual Soldering Condition (SMT) Soldering iron temperature: 90±ç, Soldering time: Within seconds. Recommended Screen Thickness (SMT) 0. to 0.mm. Board Warpage (SMT) Based on both connector edges, 0.0mm max. in the connector center portion Flow Condition with Automatic Soldering Tool. Soldering temperature: 0±ç, Soldering time: Within seconds. Recommended Soldering Condition (DIP) Manual Soldering Condition. Soldering iron temperature: 90±ç, Soldering time: Within seconds. Cleaning Condition Refer to the "Nylon Connector Use Hand book".. Connection Condition Refer to the "Nylon Connector Use Hand book". A
Product Specifications AWG to :A Operating Temperature Range -ç to +ç Note. Current rating Crimping Wire size AWG :A Operating Humidity Range 0% to 0% Rating Note 1 IDC Wire size Voltage rating AC0V Crimping Press-fit: 0V AC IDC AWG :1A AWG, :1A Press-connect: 0V AC Storage Temperature Range Storagg Humidity Range -ç to +0ç Note. 0% to 0% Rating UL-CSA Safety Standard and Approved specification Rated Current Wire size AWG to : 1A Rated Voltage V AC UL CSA Safety Standard File No. UL :E CSA :LR99 UL CSA Acquisition Objective Item 1DF-*S-C DF/A-*P-DSA/DS DF/DFAA-*EP-C DF-*S-R/ DF-*P-H Item Specification Condition 1. Insulation Resistance 00M ohms min. 00V DC. Withstanding voltage No flashover or insulation breakdown. 0V AC/1 minute. Contact Resistance m ohms max 0mA. Single Insertor/Extraction Force MIN0.N (gf), MAX.N(0gf) Measure by the square steel pin with 0.±0.00mm. Vibration No electrical discontinuity of 1µs or more Frequency: to Hz, single amplitude of 0. mm, hours in each of the directions.. Humidity (Steady state) Contact resistance: m ohms max.insulation resistance: 00M ohms min. 9 hours at temperature of 0ç and humidity of 90% to 9%. Temperature Cycle Contact resistance: m ohms max.:insulation resistance: 00M ohms min. (-ç: minutes to ç: minutes ç: minutes to ç: minutes) cycles. Durability (Mating/un-mating) Contact resistance: m ohms max. Tin plating: cycles Gold plating: 0 cycles Flow: 0ç for seconds Manual soldering: 0ç for seconds 9. Resistance to Soldering Heat No deformation of components affecting performance. Reflow: At the recommended temperature profile Manual soldering: 0ç for seconds Note 1: Includes temperature rise caused by current flow. Note : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Material Product Part Materia Finish Remarks Crimping Socket Insulator Polyamide Black UL9V-0 IDC Contact for Socket Contact Phosphor bronze Tin plated or gold plated ID Socket Insulator Polyamide Black UL9V-0 Contact Phosphor bronze Tin plated or gold plated Receptacle Insulator Polyamide Black UL9V-0 Contact Phosphor bronze Tin plated or gold plated Pin Header Insulator Polyamide Black UL9V-0 Contact Brass Tin plated or gold plated Insulator Polyamide Beige UL9V-0 SMT Pin Header Contact Phosphor bronze Tin plated or gold plated Metal tab Brass Tin plated In-line Plug Insulator Polyamide Black UL9V-0 In-line IDC Contact Contact Phosphor bronze Tin plated or gold plated Insulator Polyamide Black UL9V-0 In-line Adapter Contact Brass Tin plated Note:HRS's tin plating takes actions against whisker. A
Ordering Information Connector DF - * q w e S - C r t y q Series Name : DF w Series No. :, A, AA e Number of Contacts : ~ r Connector Type S : Socket P : Pin Header EP : In-line Plug t Contact Pitch : mm y Connection Form/Contact Style C : Crimp socket R : ID socket for AWG R : ID socket for AWG DSA : Straight through hole DS : Right angle through hole V : Straight SMT H : Right angle SMT A : Adapter Contact DF - EPPCFA q w e r Application pattern q Contact Type NONE : For socket EP : For in-line plug w Applicable Wire Size : AWG : AWG to e Contact Type/Packaging Type SCF : Socket contact, Embossed tape SC : Socket contact, Bag PCF : Plug contact, Embossed tape PC : Plug contact, Bag r Plating Type Blank : Tin plated A : Gold plated C : Gold plated A
ID Socket [Specific No.] * *, (* *) Blank : Tin plated, 0 pieces per bag (01) : Gold plated, 0 pieces per bag () : Tin plated, Tube packaging This picture shows the cable assembled status. Note 1. Mark to determine the socket name Mark: R, Mark: R AWG AWG Number of Tube packaging Number of Tube packaging A B A B Contacts Contacts DF- S-R(**) -00--** 190 pieces DF- S-R(**) -009--** 190 pieces DF- S-R(**) -009-0-** DF- S-R(**) -009-0-** DF- S-R(**) -00-9-** 1 DF- S-R(**) -009--** 1 DF- S-R(**) -01-1-** 09 DF- S-R(**) -009--** 09 DF- S-R(**) -0--** 0 DF- S-R(**) -009-9-** 0 DF- S-R(**) -0--** 00 DF- S-R(**) -009-1-** 00 DF- S-R(**) -0-0-** DF- S-R(**) -009--** DF- 9S-R(**) -0--** 9 0 DF- 9S-R(**) -0099--** 9 0 DF-S-R(**) ---** 0 DF-S-R(**) -00--** 0 DF-S-R(**) -0--** 0 DF-S-R(**) -01--** 0 DF-S-R(**) -0-0-** 0 DF-S-R(**) -0-0-** 0 DF-S-R(**) -09--** 00 DF-S-R(**) -0--** 00 DF-S-R(**) -0090--** 0 DF-S-R(**) -0--** 0 DF-S-R(**) -0091--** 0 DF-S-R(**) -0--** 0 Note.The quantity for delivery of the specific No. "None" and (01) is determined per bag (0pcs.). If needed, please order the productsper bag. Note.If the Full automatic IDC machine to hit the DF single core,the () tube packaging specification will be applied. Note.Order the tube packaging product, multiplying the tube packaging quantity (pieces). Applicable Cable Applicable Cable Jacket Diameter DF-*S-R UL1 AWG (/0.) Ø0.9 to 1mm DF-*S-R UL1 AWG (/0.) Ø0.9 to 1mm Applicable ID Connection Tool Type Connection Type Remarks Effective Harness Form 1DF-Both ended, single ended DF Single Contact Punching DF-DF, Separation Connector is the Full Automatic ID Machine AM00/DF DF-DF, Separation specification (). Effective Harness Length Tube packaging applied 0 to,000mm Conduction Inspection Mechanism Installed DF DF Desktop ID Machine DF()/ID-MO DF No restriction DF No restriction Desktop machine for small lot A
Crimping Socket Blank: 0 pieces per pack This picture shows the Contact crimped status. Number of Contacts A B Number of Contacts A B DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) -000--** -000-0-** -000--** -00--** -000-9-** -00-1-** -0009--** 0 0 DF-19S-C(**) -00--** DF-S-C(**) -00--** DF-S-C(**) -00-9-** DF-S-C(**) -00-1-** DF-S-C(**) -00--** DF-S-C(**) -00--** DF-S-C(**) -00-0-** Note1: The product's contact number indicated. Note: The quantity for delivery of the specification No. "None" is determined per bag (0 pcs.). If needed, please order the products per bag. Note: A quantity of "00 pieces package" and "00 pieces package" for delivery is dealt with pieces. Order example: 00, 00, and 00 pieces... Receptacle 09 () :Tin plated, Tube packaging (0) :Gold plated, Tube packaging Note1: The product's contact number indicated +0.1 Board Through-hole Diameter: Ø0. +0 Number of Contacts A B Tube Package Number of Contacts A B Tube Package DF-S-DSA(**) -00--** 0 0 pieces DF- 9S-DSA(**) -00-1-** 09 pieces DF-S-DSA(**) -009-9-** 0 0 DF-S-DSA(**) -00--** 1 DF-S-DSA(**) -000--** DF-S-DSA(**) -00--** DF-S-DSA(**) -001-0-** 0 DF-S-DSA(**) -00-0-** DF-S-DSA(**) -00--** DF-S-DSA(**) -009--** 1 DF-S-DSA(**) -00--** DF-S-DSA(**) -00-1-** DF-S-DSA(**) -00-9-** DF-S-DSA(**) -01--** Note: Please order the tube packaging at the multiplied tube packaging quantity (pieces). A
Straight Pin Header +0.1 Board Through-hole Diameter: Ø0. +0 +0.0 Kink Pre-fixed Effective Diameter: Ø0. +0 Tin Plating Gold Plating DFA- P-DSA -0-0 DF- P-DSA(01) -001--01 DFA- P-DSA -- DF- P-DSA(01) -00--01 DFA- P-DSA -0- DF- P-DSA(01) -0019--01 DFA- P-DSA -- DF- P-DSA(01) -00--01 DFA- P-DSA -09-0 DF- P-DSA(01) -001-0-01 DFA- P-DSA -010-0 DF- P-DSA(01) -00--01 DFA- P-DSA -011- DF- P-DSA(01) -00--01 DFA- 9P-DSA -01- DF- 9P-DSA(01) -00--01 DFA-P-DSA -01- DF-P-DSA(01) -00-0-01 DFA-P-DSA -01-0 DF-P-DSA(01) -00--01 DFA-P-DSA -01- DF-P-DSA(01) -00--01 DFA-P-DSA -01- DF-P-DSA(01) -00-9-01 DFA-P-DSA -01-9 DF-P-DSA(01) -009-1-01 DFA-P-DSA -01-1 DF-P-DSA(01) -00-0-01 Note : The quantity for delivery is determined per bag (0 pcs.). If needed, please order the products per bag. Right Angle Pin Header Number of Contacts 9 A B 0 0 Board Through-hole Diameter: Ø0.+0 +0.1 +0.0 Kink Pre-fixed Effective Diameter: Ø0. +0 Tin Plating Gold Plating DFA- P-DS -019- DF- P-DS(01) -001--01 DFA- P-DS -00- DF -P-DS(01) -00--01 DFA- P-DS -01- DF- P-DS(01) -00-9-01 DFA- P-DS -0-9 DF- P-DS(01) -00-1-01 DFA- P-DS -0-1 DF- P-DS(01) -00--01 DFA- P-DS -0- DF- P-DS(01) -00--01 DFA- P-DS -0- DF- P-DS(01) -00-0-01 DFA- 9P-DS --0 DF- 9P-DS(01) -00--01 DFA-P-DS -0- DF-P-DS(01) -009--01 DFA-P-DS -- DF-P-DS(01) -000--01 DFA-P-DS -09- DF-P-DS(01) -001--01 DFA-P-DS -0190- DF-P-DS(01) -00-0-01 DFA-P-DS -0191-0 DF-P-DS(01) -00--01 DFA-P-DS -019- DF-P-DS(01) -00--01 Note : The quantity for delivery is determined per bag(0 pcs.). If needed, please order the products per bag. Number of Contacts 9 A B 0 0 A9
Straight Pin Header (SMT) BPCB mounting pattern Note : If a pattern is included in the shaded area and is not treated with resist, it could touch the connector contact. () :Tin plated tube packaging (0) :Gold plated tube packaging With Boss Without Boss Number of Contacts A B C D Tube Packaging DF- P-V(**) -01--** DFD- P-V(**) -0--** 0... 1 pcs. DF- P-V(**) -0--** DFD- P-V(**) --0-** 0... DF- P-V(**) -0-0-** DFD- P-V(**) -09--**... DF- P-V(**) -0--** DFD- P-V(**) -0--**... DF- P-V(**) -0--** DFD- P-V(**) -0--**... DF- P-V(**) ---** DFD- P-V(**) -0--**... 1 DF- P-V(**) -0-0-** DFD- P-V(**) -0-0-**... 19 DF- 9P-V(**) ---** DFD- 9P-V(**) -0--** 9... DF-P-V(**) -09--** DFD-P-V(**) -0--**... 1 DF-P-V(**) -00--** DFD-P-V(**) -0-9-**... DF-P-V(**) -01--** DFD-P-V(**) -01-1-**... DF-P-V(**) -0-0-** DFD-P-V(**) -0--**... DF-P-V(**) -0--** DFD-P-V(**) -019--**... DF-P-V(**) -0--** DFD-P-V(**) -0--** Note : Please order the tube packaging product, multiplying by tube package quantity ( pcs.).... A0
Right Angle Pin Header (SMT) BPCB mounting pattern BTube Size Number of Contacts for Embossed Packaging Available DFD-*P-H DFD-*P-H DF- P-H(**) DF- P-H(**) DF- P-H(**) DF- P-H(**) DF- P-H(**) DF- P-H(**) DF- P-H(**) DF- 9P-H(**) DF-P-H(**) DF-P-H(**) DF-P-H(**) DF-P-H(**) DF-P-H(**) DF-P-H(**) Numbers of Contacts (1)Tin plated (1)Gold plated (1)Tin plated (1)Gold plated With Boss -0--** ---** -09-9-** -01--** -01-0-** -01--** -01--** -01-9-** -01-1-** -01--** -0--** -01-0-** -09--** -00-1-** 9 K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K Without Boss DFD- P-H(**) -01-9-** DFD- P-H(**) -0-1-** DFD- P-H(**) -0--** DFD- P-H(**) -0--** DFD- P-H(**) -0-0-** DFD- P-H(**) -0--** DFD- P-H(**) -0--** DFD- 9P-H(**) -0--** DFD-P-H(**) -09-0-** DFD-P-H(**) -0-0-** DFD-P-H(**) -01--** DFD-P-H(**) -0--** DFD-P-H(**) -0--** DFD-P-H(**) -0-0-** Number of Contacts Note1: Please order the tube packaging product, multipliing the tube package quantity. ( pcs.) Note: Please order the emboss packaging product by the reel number. (1 reel : 00 pcs.) 9 () :Tin plated tube packaging (1) :Tin plated embossed packaging (Note the number of contacts for marchandization.) (0) :Gold plated tube packaging (1) :Gold plated embossded packaging A B.............. C.............. D Tube Packaging. 1 pcs...... 1. 19.. 1..... A1
In-line Plug Blank: 1 pack Photo: Contact inserted status Number of Contacts A B Number of Contacts A B DF- EP-C(**) -0--** 0 DF- 9EP-C(**) -001--** 09 DF- EP-C(**) -0--** 0 DF-EP-C(**) -00-0-** DF- EP-C(**) -0--** DF-EP-C(**) -00--** DF- EP-C(**) -0-0-** DF-EP-C(**) -00--** DF- EP-C(**) -0--** DF-EP-C(**) -00-9-** DF- EP-C(**) -09--** DF-EP-C(**) -00-1-** DF- EP-C(**) -000--** DF-EP-C(**) -00--** Note : The specific No."None" item is delivered per bag (0 pcs.). Please order products per bag unit. In-line Plug with Panel Lock BPanel Cutouts Photo: Contact insertion status Number of Contacts A B C D E DFAA- EP-C(**) -01--** 0 9.. DFAA- EP-C(**) -0--** 0.. DFAA- EP-C(**) -0-0-**.. DFAA- EP-C(**) -0--** 1.. DFAA- EP-C(**) -0--** 19 1.. DFAA- EP-C(**) -0-9-** 1 19.. DFAA- EP-C(**) -0-1-** 1.. DFAA- 9EP-C(**) -0--** 9.. DFAA-EP-C(**) -09--**.. DFAA-EP-C(**) -00--** 9.. DFAA-EP-C(**) -01-9-** 1 9.. DFAA-EP-C(**) -0-1-** 1.. DFAA-EP-C(**) -0--**.. DFAA-EP-C(**) -0--**.. Note : Specific No."None" item is delivered per bag (0 pcs.). Please order products per bag unit. Note1: Applicable panel thickness is 1. to 1.0mm. (However, a slight backlash is considered for the thickness other than 1. and 1.mm.) Note: Use the non-radius surface at the hooking panel edge. Note: Contact No. indicates 1,,,, and. Blank : 0 pcs. per bag A
In-line Adapter with Panel Lock BPanel Cutouts Adapter to in-line by pushing pcs. of socket from both sides No.1-No.1 connection circuit type DF- EP-A(**) DF- EP-A(**) DF- EP-A(**) DF- EP-A(**) DF- EP-A(**) DF- EP-A(**) DF- EP-A(**) DF- 9EP-A(**) DF-EP-A(**) DF-EP-A(**) DF-EP-A(**) DF-EP-A(**) DF-EP-A(**) DF-EP-A(**) -0-0-** ---** -09--** -00--** -01--** -0-0-** -0--** -0--** -0--** -0-0-** -0--** -0--** -09-9-** -00--** Number of Contacts A B 9 1 19 1 9 1 D E 9........ 1.. 19.. 1........ 9.. 1...... Note : Specific No."None" item is delivered per bag (0 pcs.). Please order products per bag unit. C 0 0 Note1: Applicable panel thickness is 1. to 1.0mm.(However,backlash will occur except for 1., 1.mm thickness.) Note: Please use the non-radius surface at the hooking panel edge. Blank : 0 pcs. per bag A
Crimping Contact for Socket Type Finish DF-SCF -0- Reel contact 000 pcs. per embossed tape bag DF-SC DF-SCF -0- -0001- Bulk contact Reel contact 0 pcs. per embossed tape bag 000 pcs. per embossed tape bag Tin plated DF-SC -000- Bulk contact 0 pcs. per embossed tape bag DF-SCFC DF-SCC -00-0 -00- Reel contact Bulk contact 000 pcs. per embossed tape bag 0 pcs. per embossed tape bag Gold plated Applicable Wire (Tin Plating Annealed Copper Wire) Conductor Size (Wire Configuration) AWG (1pcs./0.mm) AWG (pcs./0.mm) AWG (pcs./0.mm) AWG (pcs./0.mm) Jacket Diameter Ø1. to Ø1.mm Ø0. to Ø1.mm Recommended Wire UL1, UL0 (Note.) Strip Length 1. to.mm Note1: If other wires are used instead of the applicable cable, please contact HRS company. Note: DF-SCF is applicable to UL1. Crimping Contact for In-line Plug Type Finish DF-EPPCF DF-EPPC -0- -0-0 Reel contact Bulk contact 000 pcs. per reel 0 pcs. per pack Tin plated DF-EPPCFA DF-EPPCA -09- -00- Reel contact Bulk contact 000 pcs. per reel 0 pcs. per pack Gold plated Applicable Wire (Tin Plating Annealed Copper Wire) Conductor Size (Wire Configuration) AWG (pcs./0.mm) AWG (pcs./0.mm) AWG (pcs./0.mm) Jacket Diameter Ø0. to Ø1.mm Recommended Wire UL1, UL0 Strip Length 1.9 to.mm Note1: If other wires are used instead of the applicable cable, please contact HRS company. BApplicable Crimping Tool Type Applicable Contact AP-DF-S 901-0- DF-SCF/SCFC Applicator AP-DF-S 901-9- DF-SCF AP-DF-EPP 901-- DF-EPPCF/PCFA Press Unit CM- 901-000- DF-TAHC 0-0- DF-SC/SCC Hand Crimping Tool DFEP-TAHC 0-0- DF-EPPC/PCA DF-TAHC 0-0- DF-SC Extraction Tool DF-C-PO (A) 0-010- DF-****SCF DF-EP****PCF Note : If any trouble has occurred due to tools other than designated tool, Hirose bears no respoisibility for any trouble. A