lift system Smooth motion for the lift up With HL, the one-part front lifts up parallel to the cabinet. This lift system is ideal for applications in high and wall cabinets with fronts above or in larder unit installations as well as recessed cabinets, e.g. to conceal electrical appliances. Silent and effortless closing, thanks to BLUMOTION Easy to open Stops in any required open position Provides good access to cabinet interior Suitable for cabinets with cabinets above, as well as cornice and crown moulding Small programme, huge application variety Easy assembly and adjustment Stability, even with wide fronts Excellent durability No protruding parts Opening and closing easy and comfortable Regardless of the weight and size, HL only requires light operating forces for easy opening and closing. The variable stop ensures that the front always remains in the desired position Thanks to the integrated BLUMOTION, both heavy and light fronts close silently and effortlessly Other advantages that will inspire both you and your customers Excellent durability The core element of the lift mechanism is a robust spring package. The result: excellent durability No protruding parts Removable lever arm an advantage for furniture manufacturing and kitchen installation Cornice and crown moulding HL is suitable for cabinets with cabinets above, as well as those with cornice and crown moulding 60
lift system Overview Wooden fronts and wide alu frames Narrow alu frames 62 62 Symbol photo Accessories Symbol photo Screw-on Centre bit Door buffer Screwdriver Cross slot bit, removal and adjustment Warning and safety information Removal Adjustment 74 74 74 75 75 64 64 66 65 Symbol photo Pictograph Item Available Upon Request General Information Accessories HL lift up Wooden front Wide alu front Narrow alu front Planning, removal and adjustment 61
lift system Wooden fronts, wide and narrow alu frames Product Description Power factor range - Well-suited to small-area, single fronts - Cabinet height 300-580 mm - Cabinet width up to 1800 mm - Silent and effortless closing, thanks to BLUMOTION - Light operating forces when opening and closing - Perfect comfort of motion with a variable stop - Simple, tool-free assembly - 3-dimensional adjustment of both fronts - Simple, infinitely variable lift mechanism In order to select the correct lift mechanism, it is necessary to establish both the cabinet height and the weight of the front (including the handle). We recommend the more powerful lift mechanism for overlapping areas. Ordering information 1 Lift mechanism set 2 Lever arm set Cabinet height KH (mm) Composed of: 20L2100 20L2300 20L2700 20L2500 20L2900 300-349 350-399 400-550 450-580 20L3200 20L3500 20L3800 20L3900 1a Lift mechanism (symmetrical) 1c Cover cap large left/right 1d Cover cap round Chipboard screws Ø 4 x 35 mm 10 x Composed of: 2a Lever arm left/right 2b Stabiliser adapter oval 2c Cross stabiliser cover cap oval Weight of front incl. handle (kg) Cabinet height KH (mm) Lift mechanism set 20L3200 20L3500 20L3800 20L3900 20L2100 1.25-4.25 1.25-2.50 20L2300 20L2500 20L2700 20L2900 300-349 350-399 400-550 450-580 Lever arm left/right 3.50-7.25 1.75-5.00 1.75-3.50 6.50-12.00 4.25-9.00 2.75-6.75 2.00-5.25 11.00-20.00 8.00-14.75 5.75-11.75 4.25-9.25 13.50-20.00 10.50-20.00 8.25-16.50 3 Front fixing bracket set Steel nickel plated Wooden fronts and wide alu frames* 20S4200 Narrow alu frames 20S4200A * Use self tapping screws for wide alu frames 8 Oval cross stabiliser For cutting to size, 1061 mm Alu oval 20Q1061UA Cutting Internal cabinet width LW - 120 mm 9 Connecting piece set for cross stabiliser Starting with cabinet width 1219 mm Alu Ø 16 mm Cutting for 8 Cabinet width KB / 2-158 mm Valid for cabinet thickness 15-19 mm Composed of: 9a Connecting piece 9b Fixing 9c Stabiliser adapter 9d Cross stabiliser cover cap 20Q091ZA 1 x 1 x Page instructions Overview 35 Accessories 74 Warning and safety information 64 and adjustment 64 devices 556 Reference values for door weights 664 62
lift system Wooden fronts, wide and narrow alu frames Planning Peg positions Fixing screw positions Space requirement/front setting Lever arm a (mm) b (mm)* min. LH (mm)* Y (mm)* SOB Top panel thickness * Drilling depth 5 mm 5 x chipboard screws Ø 4 x 35 mm * Left ** Right 20L3200 20L3500 20L3800 20L3900 114.0 146.0 178.0 210.0 257.0 345.0 433.0 522.0 262.0 312.0 362.0 412.0 264.0 352.0 440.0 529.0 * Dimensions apply to lower gap = 0 mm Front assembly Wooden fronts and wide alu frames Front assembly Narrow alu frames Planning Narrow alu frames Lever arm X (mm) FAo Upper front overlay SFA Side front overlay Wall application: min. gap required 5 mm 20L3200 153 20L3500 203 20L3800 253 20L3900 303 * When changing material thickness, adjust the assembly dimensions accordingly For frame width 19 mm, a side front overlay SFA of 11-18 mm is possible Cornice/crown moulding clearance Connecting piece Top panel thickness X (mm) SOB (mm) 16 28 18 30 19 31 63
lift system, removal and adjustment Lift mechanism Lever arm WARNING Lever arm could spring up and cause injury. Special warning and safety information must be added for North America Lever arm could spring up and cause injury Remove the lever arm rather than pushing it down Cross stabiliser Lever arm must be seated on the lift mechanism Tightly secure screws 64
lift system, removal and adjustment Front Lift mechanism Setting Front Setting 65
lift system, removal and adjustment Cover caps Removal WARNING Lever arm could spring up and cause injury. Special warning and safety information must be added for North America Lever arm could spring up and cause injury Remove the lever arm rather than pushing it down 66
lift system, removal and adjustment Removal 67
X X lift system Accessories Chipboard screws Ø 3.5 mm Ø7 - Nickel plated - Ø 3.5 mm Length (X) 15 mm 17 mm 609.1500 609.1700 Ø3.5 Chipboard screws Ø 4.0 mm - Nickel plated - Ø 4 mm Length (X) 35 mm 730.425.2 System screws Ø 6.0 mm Ø6 Ø8 - Nickel plated - Ø 6 mm - Drilling diameter 5 mm Length (X) 10 mm 11.5 mm 13 mm 14.5 mm 20 mm 661.1000.HG 661.1150.HG 661.1300.HG 661.1450.HG 661.2000.HG Centre bit - Hardened - Ø 2.7 mm, length 70 mm - To pre-drill for Ø 3.5 mm chipboard screws - Drilling depth up to 8 mm Centre bit Drill bit M01.ZZ03 M01.ZZB3 Stick-on door buffer - For noise reduction Nylon natural 993.710 8 mm Ø door buffer - For noise reduction - Gap 2 mm - Two-part Nylon RAL 9006 white aluminium 993.706 74
lift system Accessories Phillips screwdriver - PZ (Pozi) size 2 - Blade length 100 mm - Overall length 200 mm - Orange handle with Blum logo Nylon/steel orange 303.756.1 Slotted screwdriver - Slotted, size 1.0 x 5.5 mm - Blade length 125 mm - Overall length 225 mm - Orange handle with Blum logo Nylon/steel orange 314.928.1 Cross slot bit - Screw bit - PZ (Pozi) size 2 Material Steel 740.749.1 Opening angle stop - Suitable for the HF bi fold lift system - Tool-free assembly and removal - Additional 5th fixing screw (Ø 4 x 35 mm) required for the lift mechanism Nylon 104 83 20F7051 20F7011 Page instructions 51 Opening angle stop - Suitable for HK bi-fold lift system - Tool-free assembly and removal Nylon 100 75 20K7041 20K7011 Page instructions 73 75