SPLASH technical description updated: GG/ February 2013, page 1/10 Splash collection technical description
AMAT-3, S.A.u. Model : design: Splash collection Jorge Pensi Cami Can Bros 5, 08760 Martorell -Barcelona- Spain tel.+34 937 755 651 fax.+34 937 753 454 amat@amat-3.com www.amat-3.com Structure Legs and armrest made in extruded aluminium tube, polished and anodised assembled by means of stainless steel screws. The aluminium tube 25x2 mm complies with the norms UE AFNOR AGS and USA AA 6063. Glides made in polyethylene. Seat and back Made in first generation polypropylene from the range HOSTALEN injected with gas, which has been added stabilizers and UV screeners. The bottom of the seat shows stamped the name of the designer and the name and the logo of the producer. 14 standard colours: P27-glaciar P66-menta P65-vainilla P01-blanco P18-perla P69-grafito P08-negro P43-mostaza P67-navy P68-pistacho P39-mango P70-mandarina P71-melocotón P79-amapola Remarks Suitable for outdoor as well as indoor use. The armchair can stack up to 6 on a dolly. Tests The chair has passed successfully the resistance tests under the following Norms: American Norm ANSI/BIFMA X5.1-1993, Certified by AIDIMA. European Norm EN 581-1:1997 and pren 581-2. Awards Selection, ADI-FAD, 1999. Standard table frame Table base in polished and anodised cast aluminium with adjustable polypropylene glides. The base is assembled to the table top by injected aluminium cross. Central column in polished and anodised aluminium tube of 60x2mm (60x4mm for tables with the 5-foot base). The high tables are complemented with a weight inside the column to grant its stability. Versions of 3 foot (EMS3), 4 foot (EMS4), 5 foot (EMS5) and 2 pair-2 foot (EMS2), all of them with adjustable glides. SPLASH technical description updated: GG/ February 2013, page 2/10
Adjustable glides Table base in polished and anodised cast aluminium with adjustable polypropylene glides in the below 2 different shapes available in the same polypropylene colours as the Splash armchair cylindric disk Standard table tops Available in various options: 1. Stainless steel small circles with wrapped edge: For dia. 60 cm tops it is also available the concentric circles version. 2. High-pressure laminate overlaid on a 20 mm MDF board, MDF cherry varnished edge. 3. Beech veneer, thickness 20mm 4. Compact laminate extra, thickness 13mm 5. Compact laminate standard, thickness 13mm (Products; for indoor and outdoor use; for indoor use only) Modular tables It is a table system which allows the customized composition of meeting and/or conference rooms with tables of two, three or more columns. Modular table structure It is composed of base, column, crossbeam and cross. Footrests are only present on the two/three columns Modular table, but not included on the Modular System compositions (where the crosses are also used as junction to assemble two tops). Base in polished and anodised cast aluminium with adjustable polypropylene glides (cylindric or disk). Columns in polished and anodised aluminium tube. Footrest in steel coated in epoxy-polyester powder coating with an outer layer of transparent varnish for additional protection. Modular table tops Available in 3 options: 1. High-pressure laminate overlaid on a 20mm MDF board, with varnished edge. 2. Beech veneer, thickness 20mm 3. Compact laminate standard, thickness 13mm Assembled to the frame by an injected cast aluminium cross under the top. ( for indoor use only) SPLASH technical description updated: GG/ February 2013, page 3/10
dimensions in cm armchair Splash EMS3 3-foot table Ø60, 60x60 EMS4 4-foot table Ø70, Ø80, Ø90, Ø100, 70x70, 80x80 EMS5 5-foot table Ø110, Ø120, 90x90 EMS2 2-pair 2-foot table 100x60, 120x60, 120x70, 120x80, 140x70, 140x80 EMST 3-foot high table Ø60 EMSV 4-foot high table/2 tops Ø60+Ø70 EMSM table with 2 columns 160x80, 160x90, 180x80, 180x90 EMSM table with 3 columns, 200x80, 200x100, 220x80, 220x100, 240x80, 240x100 M1-MODUL 1 final top+1 leg M2-MODUL 1 intermediate top+1 leg PIE 1 leg to complete a line M3-MODUL 1 final corner top left+1 leg M4-MODUL 1 final corner top right+1 leg SPLASH technical description updated: GG/ February 2013, page 4/10
Schema of combination of Splash Modular tables Complements The Splash armchair and table collections are complemented with several items: 1. A transport dolly to move the armchairs when stacked. 2. The chair hanger for tables that makes the cleaning easier. 3. Flip-flop table top folding mechanism. 4. The Forum desk collection for educational areas. 5. The Twist barstool, which is suitable for outdoor use in the aluminium and polypropylene versions. 6. The Twist stackable table, with a 60cm diameter polypropylene table top. SPLASH technical description updated: GG/ February 2013, page 5/10