PSE Technology Corporation

Similar documents
PSE Technology Corporation

PSE Technology Corporation

PSE Technology Corporation

PSE Technology Corporation

PSE Technology Corporation

PSE Technology Corporation

PSE Technology Corporation

PSE Technology Corporation

PSE Technology Corporation

PSE Technology Corporation

PSE Technology Corporation

S1903 and S1950 Series

Packaging Outline. 7mm. FN A = Product Family. Frequency Stability *AA = ±20 ppm (-10 to +70 C) *A = ±25 ppm (-10 to +70 C)

Preliminary. 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Frequency 8 to 1500 MHz 2.2 Operating Temperature Range

VC-820 CMOS Crystal Oscillator

XCO FAST TURNAROUND CLOCK OSCILLATOR HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR FEATURES + DESCRIPTION SELECTOR GUIDE LVCMOS LVDS LVPECL

HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR

VVC4 Voltage Controlled Crystal Oscillator

MEMS Oscillator, Low Power, LVCMOS, MHz to MHz

VCC1 VCC1. CMOS Crystal Oscillator. Description. Features. Applications. Block Diagram. Output V DD GND E/D. Crystal. Oscillator

Dynamic Engineers Inc.

Product Specifications Approval Sheet

VV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2

VX-805 Voltage Controlled Crystal Oscillator

Rakon Product Proposal

VCC M CMOS Crystal Oscillator

VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator

VX-705 Voltage Controlled Crystal Oscillator

Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator E/D

Description. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw

VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator

CARDINAL COMPONENTS, INC. The Cardinal Cappuccino Crystal Oscillator CMOS TCXO 10MHz - 250MHz

VC-801 CMOS Crystal Oscillator Previous Vectron Model VCC4

CMOS/LVCMOS HF VCXO AE-X32BXX-X Series

VCC6-Q/R Series 2.5 and 3.3 volt LVPECL Crystal Oscillator

VS-708 Single Frequency VCSO

VX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.

Logic & Supply Voltage: L = LVHCMOS +3.3V at 15pF N=LVHCMOS +2.5V at 15pF R = LVHCMOS +1.8V at 15pF

VT-802 VT-802. Temperature Compensated Crystal Oscillator. Description

VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator

A DROP-IN REPLACEMENT SOLUTION FOR YOUR EMI / EMC COMPLIANCE PROBLEM

VVC1 VVC2 Voltage Controlled Crystal Oscillator

EMI Reduction Spread Spectrum Clock Oscillators 3HM572 Series Group R

J-Type Voltage Controlled Crystal Oscillator

VC-827 Differential (LVPECL, LVDS) Crystal Oscillator

Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator. E/D or NC

VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator

Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f MHz

Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V

Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range. Frequency Stability and Aging ppm ppm ppm ppm

Model 653 Very Low Jitter LVPECL or LVDS Clock

VC-827 Differential (LVPECL, LVDS) Crystal Oscillator

VC-711 Differential (LVPECL, LVDS) Crystal Oscillator

Model 633 Very Low Jitter LVPECL or LVDS Clock

Model 356P/L Advanced PLL LVPECL or LVDS VCXO

SONET / SDH. Block Diagram. COutput Output XTAL HPLL. OE or NC. Figure 1 - Block Diagram

VF3 XO Low Jitter 5x7mm SMD, HCMOS/TTL

Block Diagram. COutput Output XTAL HPLL. Vc OE Gnd. Figure 1 - Block Diagram

QTCT350 SERIES 3.2 x 5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 5.0Vdc MHz to 52.

Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f MHz

VX-503 Voltage Controlled Crystal Oscillator

LVDS, and CML outputs. Industry-standard 5 x 7 mm package and pinout Pb-free/RoHS-compliant

VFH230C Series XO Low Jitter 3.3V 5x7mm SMD, LVPECL / LVDS

VFH2321-VFH2324 VFH2421-VFH2424 XO Hi-REL, 1.8V 5x7mm SMD, HCMOS

Q-TECH CORPORATION khz QT381 AND QT386 SERIES ULTRA-LOW CURRENT, HIGH-TEMPERATURE REAL TIME CLOCK OSCILLATORS 2.5Vdc and 3.3Vdc - 32.

Ultra Low Jitter LVPECL or LVDS Clock

Features. o HCSL, LVPECL, or LVDS o HCSL/LVPECL, HCSL/LVDS, LVPECL/LVDS. o Ext. Industrial: -40 to 105 C o o. o 30% lower than competing devices

QTCH350LD92-32K768Hz Q T CH 350 L D kHz Drilling, data logging tools Oil service industry High temperature applications

LVPECL 5 x 3.2mm 1.8V Oscillator

Series T7250-T7258, T9250-T9258, T7001-T7013, T9301-T9313 Extended Temperature/COTS XO, 3.3V

VS-800 Ultra-Low Jitter High Frequency VCSO

VCA1 series 3.3, 5.0 volt CMOS Oscillator

MX-600 Microprocessor Controlled Crystal Oscillator High Precision

QTCT570 SERIES 5 x 7mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to MHz Description

MX-503 High Precision Microprocessor Controlled Crystal Oscillator

CMOS, Ultra-low Jitter Voltage Controlled Crystal Oscillators (VCXOs)

Key Electrical Specifications Parameters Minimum Typical Maximum Units Notes ppm

Solder Dip Options T = Standard S = Sn60Pb40 G=SAC305. Package 86 =Leaded 80 = Formed Leads 85=SMT. VCXO model

Features. o HCSL, LVPECL, or LVDS o HCSL/LVPECL, HCSL/LVDS, LVPECL/LVDS. o Ext. Industrial: -40 to 105 C. o o. o 30% lower than competing devices

Specification. TO: Mouser. KYOCERA Corporation. Feb Note:In case of specification change, KYOCERA Part Number also will be changed.

Other Options Available For An Additional Charge Hot Solder Dip Sn60/Pb40 per MIL-PRF Specifications subject to change without prior notice.

Specification. Drawing No. Issued Date

PL XIN CLK XOUT VCON. Xtal Osc. Varicap. Low Phase Noise VCXO (17MHz to 36MHz) PIN CONFIGURATION FEATURES DESCRIPTION BLOCK DIAGRAM

Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V

T5321 Series T5421 Series 5x7 mm Surface Mount High Reliability Tristate/Non-Tristate, 1MHz to 100MHz

HCMOS 7 x 5mm 1.8V Oscillator

Synchronized Crystal Oscillator, General Requirements. AH-ASCMXXXG-X Series PATENT PENDING

Programmable Low-Jitter Precision CMOS Oscillator

MX-503 Microprocessor Controlled Crystal Oscillator High Precision

LVDS 5 x 3.2mm 2.5V Oscillator

VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator

Description. Block Diagram LD (10) VMON (5) Phase Detector & LD (9) FIN 4 CFOUT 1 GND (3, 7, 11, 12) Figure 1. Functional block diagram

VS-751 VS-751. Dual Frequency VCSO. Description. Features. Applications. Block Diagram. Vcc COutput Output SAW 1 SAW 2. Vc FS Gnd

Low Power (na Current Consumption) KHz ME831, ME832, ME833, ME834 Series

2.0 Absolute Maximum Ratings 1 Parameter Min. Max. Unit. a. Storage temperature C b. Supply voltage (VDD) V

MEMS Ultra-Low Power Oscillator, khz Quartz XTAL Replacement

Rakon Product Proposal

TX-801 Temperature Compensated Crystal Oscillator

VT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.

DSC x 1.2 mm Low-Power Ultra-Miniature Oscillator. General Description. Features

Transcription:

PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY 25.000000 MHz PRODUCT TYPE SPEC. NO. ( P/N ) TYPE FJ 2.5x2.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR CUSTOMER P/N ISSUE DATE August 6, 2015 VERSION A APPROVED PREPARED QA APPROVED BY CUSTOMER: AVL Status Please return one copy with approval to PSE-TW PSE Technology Corporation No.2, Tzu-Chiang 5th Rd, Chung Li Industrial Park, Chung Li City, Taoyuan County, Taiwan (R.O.C.) TEL: 886-3-451-8888 FAX: 886-3-461-3865 http://www.saronix-ecera.com.tw *Pb-free *RoHS Compliant *HF-Halogen Free *REACH Compliant E0-R-4-014 Rev. E Page i

VERSION HISTORY VER. A 6-Aug-15 Version No. Version Date Customer Receipt Date Supplier Receipt Date Description Notes A Aug.6,2015 Initial Release E0-R-4-014 Rev. E Page ii

VER. A 6-Aug-15 ELECTRICAL SPECIFICATIONS SRe Part Number : Item Symbol Specifications Units Notes Nominal Frequency Fo 25.000000 MHz Frequency Stability FT ± 25 ppm **See note Operating Temperature Range TR -20 to +70 C Supply Voltage V DD +1.8 ± 5% V Logic Type LT LVCMOS Supply Current, Output Enabled I DD /OE 6 ma Max Supply Current, Output Disabled I DD /OD 10 µa Max Duty Cycle (Symmetry) DC/SY 45 / 55 % Measured 50% of Waveform Rise / Fall Time T R /T F 6 ns Max. measured 10 / 90% of Waveform Output Voltage "0" Level V OL 10% V DD V Max Output Voltage "1" Level V OH 90% V DD V Min Output Load CL 15 pf Max Jitter, Phase RMS 1.5 ps Max. 12KHz ~ 5MHz Frequency Band Jitter, Accumulated RMS(1-σ) 5 ps Typ. 20,000 Consecutive Periods Jitter, Peak to Peak Pk-Pk 50 ps Max. 100,000 Random Periods Start Up Time 10 Storage Temperature Range -55 to +125 ms C Max. This product doesn't include harmful substance that stipulated by SONY SS-00259 Level 1 and S-AT2-001 Level 1 standard. RoHS Compliant (Pb - Free). **Stability includes all combinations of Operating Temperature, Load changes, rated Input (Supply) Voltage changes, Initial Calibration Tolerance (25 C), Aging (1 year at 25 C Average Effective Ambient Temperature), Shock and Vibration. Max. Or Open Output Enable / Disable Function Parameter Min. Typ. Units Notes Input Voltage (Pin1), Output Enable 0.7V DD V Input Voltage (Pin1), Output Disable (low power standby) 0.3V DD V Output is Hi-Z Internal Pullup Resistance 30 KΩ Output Disable Delay Output Enable Delay 50 50 ns us E0-R-4-014 Rev. E Page 1

VER. A 6-Aug-15 TEST CIRCUIT OUTPUT WAVEFORM E0-R-4-014 Rev. E Page 2

RELIABILITY SPECIFICATIONS VER. A 6-Aug-15 ENVIRONMENTAL: a) THERMAL SHOCK: MIL-STD-883, Method 1011, Condition A b) MOISTURE RESISTANCE: MIL-STD-883, Method 1004 c) VIBRATION: MIL-STD-883, Method 2007, Condition A d) RESISTANCE TO SOLDERING HEAT: J-STD-020D Table 5-2 Pb-free devices (except 2 cycles max) e) HAZARDOUS SUBSTANCE: Pb - free and RoHS/Green Compliant. MECHANICAL: a) SHOCK: MIL-STD-883, Method 2002, Condition B b) SOLDERABILITY: JESD22-B102-D Method 2 (Preconditioning E) c) TERMINAL STRENGTH: MIL-STD-883 883, Method 2004, Test Condition D d) GROSS LEAK: MIL-STD-883, Method 1014, Condition C e) FINE LEAK: MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s f) SOLVENT RESISTANCE: MIL-STD-202, Method 215 SUGGESTED IR REFLOW PROFILE *As per IPC-JEDEC J-STD-020D For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf E0-R-4-014 Rev. E Page 3

VER. A 6-Aug-15 MARKING Logo Dot denotes Pin #1 e 250 ywwv Frequency Code Date & Factory Code y ww v Year Code (last digit of year) Week Code Factory Code MECHANICAL DRAWINGS ( Scale:None. Dimensions are in mm.) Recommended Land Pattern* Pin 1 2 3 4 Function OE Ground Clock Output V DD E0-R-4-014 Rev. E Page 4

VER. A 6-Aug-15 TAPE & REEL Index Mark 1. 230mm minimum leafer which consist of carrier and/or tape followed by a minimum of 160mm of empty carrier tape sealed with cover tape. 2. 160mm minimum trailer of empty carrier tape sealed with cover tape. E0-R-4-014 Rev. E Page 5

PACKING VER. A 6-Aug-15 Begin Close Start 3000pcs-Product Tape End Inner Packing Carton Blue Qualified Label Storeroom Label Storeroom Label Storeroom Label Deliver Packing Carton (L29*W24*H30) Green Qualified Label E0-R-4-014 Rev. E Page 6