CONCRETE SAW PARTS LIST MODEL CCXL-EE December 01 Part # 1
Intentionally Blank
Table of Contents Description Page No. Frame Assembly... Carriage Assembly Motor Assembly.... Blade Shaft Assembly... Spring Box Assembly....- Pointer Assembly.. Warranty... Quick Reference Replacement/Service Parts DP Part No. Description 03 Skid Plate - / Blade -.1 Slot 0030 (1) V-Belt-3V300
FRAME ASSEMBLY: 003 1 1 0 3 13 1 1 13 1 11 1 1 1 ITEM PART NO. QTY. DESCRIPTION 1 00 1 Frame Weldment 00 1 Handle Weldment 3 00 1 Guard, Belt 001 1 Lift Cage 01 1 Bracket, Handlebar Lever 00001 /" Handle Grip 03 1 T Handle Locking Knob /w 3/-1 Stud 0001 Cap Screw, Hex Hd., /1-1 x 3/" 0013 Cap Screw, Hex Hd., /1-1 x 1" 000 1 Cap Screw, Hex Hd., /1-1 x 1-1/" 11 00 1 Bumper w/ /1-1 threaded stud 00031 Lock Washer, /1" Split 13 003 Jam Nut, /1-1 1 033 1 Plug, 1-1/ Square Tube 1 000 1 Blade Stop Block 1 011 1 Spring, Comp.. x.0 x 1.00 Long 1 001 1 Blade Stop 1 00 1 Wrench, 1-1/1" Open End 1 0030 1 Wing Screw, M x 1mm 0 1 1 CCXL Core Cut Decal 1 01 1 Serial Number Plate, US 0003 Rivet, 3/3" Dia.
AXLE ASSEMBLY: 003 1 0 1 1 1 13 1 11 1 1 1 1 3 1 SHORT SIDE 1 ITEM PART NO. QTY. DESCRIPTION 1 000 1 Axle Weldment 001 1 Shaft, Front Axle 3 00 1 Bracket, Lift 00 1 Shaft, Rear Axle 000 1 Lift Plate 031 Bearing, Flanged Bronze 3/ ID 00 Retaining Ring,. Ext. Heavy Duty 0 1 Pivot Pin 000 1 Set Screw, Soc. Hd., #-3 x 1/" 0003 1 Cotter Pin, 3/3" x 3/" 11 000 1 Spring, Ext 3/ X.0 X " 031 Wheel 3 X 3 X 3/" Poly 13 03 1 Cable Assembly 1 0 3 Shaft Collar, 3/" Split 1 0000 Lock Washer, 3/" Split 1 000 Lock Nut, 1/-0 Nylon 1 00 1 Hex Nut, 1/-0 1 001 Cap Screw, Hex Hd., 1/-0 x 3/" 1 000 Flat Washer, /1" SAE 0 0000 Cap Screw, Hex Hd., 3/-1 x 1" 1 0001 1 Shoulder Screw, /1" x 1/" (1/-0) 0000 1 Cap Screw, Hex Hd., 1/-0 x 1"
MOTOR ASSEMBLY: 0030-HONDA 00- BRIGGS 000-LIFAN 1 1 0 1 11 1 1 1 1 3 3 13 13 1 ITEM PART NO. QTY. DESCRIPTION 1 0001 1 Engine, Honda. HP (GX) 0001 1 Engine, Briggs & Stratton.HP 0 1 Engine, Lifan LF1F 03001 Mount, Engine Honda GX 3 0030 1 V-Belt, 3VX300 030 1 Oil Drain Assembly (Honda & Lifan) 030 1 Oil Drain Assembly (Briggs) 0 1 Sheave, 3.3- Groove (-3V-3.3-TB) 0003 Lock Nut, /1-1 Nylon 000 Flat Washer, /1" SAE 001 Cap Screw, Hex Hd., /1-1 x 1-1/" 0 1 Key, 3/1" Sq. x 1-1/" 000 Cap Screw, Hex Hd., /1-1 x 1-1/" 11 0111 1 Taper Bushing, 3/" with setscrews 00 1 Plate, Belt Tensioner 13 0 Ball Bearing, 1/ x 1-3/ x /1 (11-ZZ) 1 003 1 Bushing, Steel 1/ ID x / OD x / Long 1 0310 1 Spring, Ext.. x.03 x 3.00 Long 1 0 1 Bearing, Bronze Fl. SF-1-1 00 1 Friction Washer, /1" 1 00 1 Cap Screw, Hex Hd., /1- x 1-1/" 1 00 1 Cap Screw, Hex Hd., /1- x 3/" 003 1 Cap Screw, Hex Hd., 1/-0 x 3/" (Briggs) 0 000 1 Jam Nut, /1-00 1 Jam Nut, 1/-0 (Briggs) 1 000 1 Lock Nut, 1/-0 Nylon 001 1 Cap Screw, Hex Hd., 1/-0 x 3/" 3 00 1 Shoulder Screw, 1/" x 1-1/" (3/-1) 00031 Lock Washer, /1" Split 0011 Hex Nut, /1-1 03 1 Jam Lock Nut,3/-1 00 1 Hex Nut, /1-
BLADE SHAFT ASSEMBLY: 0030 11 1 3 ITEM PART NO. QTY. DESCRIPTION 1 00 1 Blade Shaft 003 Pillow Block Bearing 1" 3 0 1 Sheave, 3V-GR, 3" 0 1 Flange, Inner Blade 3" 00 1 Flange, Outer Blade 3" 01 1 Key, 1/" Sq. x 1-1/" 0001 1 Key, 1/" Sq. x 3/" 001 1 Set Screw, Soc. Hd., 1/-0 x 3/" 001 1 Set Screw, Soc. Hd., /1-1 x 3/" 000 1 Flange Nut, /-11 R.H. 11 0000 Lock Washer, 3/" Split 0000 Cap Screw, Hex Hd., 3/-1 x 1"
SPRING BOX ASSEMBLY # 00 13 13 1 30 1 1 3 RED LOCTITE ON SET SCREWS 1 1 0 1 1 33 3 3 1 1 1 3 3 31 3 31 11 1 NO LOCTITE 3 ASSEMBLY NOTE: 1. APPLY 00 SYNTHETIC GREASE TO OD OF COMPRESSION SPRINGS. APPLY BLUE LOCTITE ON ALL THREADS UNLESS NOTED
SPRING BOX ASSEMBLY # 00 ITEM PART NO. QTY. DESCRIPTION 1 00 1 Cover, Top Spring Box 00 1 Cover, Outer Lexan 3 00 1 Spring Block, Rear " 003 1 Spring Block, Front " 00 1 Cover, Inner Spring Box 00 1 Shaft, Spring Block Rear 00 1 Shaft, Spring Block Front 00 Block, Dust Diverter 001 1 Cover, Outer Spring Box 03 Shaft Seal, 1/" Shaft 11 001 1 Diverter, Rear Dust 000 1 Diverter, Front Dust 13 00 Spring Block Cap 1 003 1 Cover, Inner Lexan 1 00 Cap Screw, Flat Hd., #-3 x 1/" 1 00031 Lock Washer, /1" Split 1 0003 Lock Washer, # Split 1 00 1 Cap Screw, Hex Hd., /1-1 x /" 1 0003 1 Lock Nut, /1-1 Nylon 0 0013 1 Cap Screw, Hex Hd., /1-1 x 1" 1 01 Cap Screw, Soc. Hd., #-3 x 1-1/" 01 Flat Washer, 1/" Nylon 3 01 1 Roll Pin, 1/ Dia. x /1" 000 Shoulder Screw, 1/" x /1 (#-) 00 1 Dowel Pin, 1/" Dia x 1-1/" 000 1 Fender Washer, M 003 Cap Screw, Flat Hd., #-3 x 1-1/" 01 1 Pin, Safety 1/" 000 Jam Lock Nut, #- Nylon 30 03 Spring, Comp..0 x.0 x 3.0 Long 31 003 Captive Thumb Screw, /1-1 3 013 Washer, Belleville /1" 33 0 Retaining Ring, /1 Ext. 3 03 1 Skid Plate Weldment-/" Blade -.1 Slot 3 000 Set Screw, Soc. Hd., #-3 x 1/" 3 3 1 DP Symbol Decal 3 00 AR Grease, Fuchs Synthetic
POINTER ASSEMBLY: 0 1 3 11 3 ITEM PART NO. QTY. DESCRIPTION 1 0 1 Pointer 0001 Flat Washer, 3/" SAE 3 0013 Friction Washer, 3/" 000 1 Cap Screw, Hex Hd., 3/-1 x -1/" 0001 Lock Nut, 3/-1 Nylon 0 1 Guide Wheel 0 1 3/-1 X.00" Threaded Rod 001 1 Cap Screw, Hex Hd., 1/-0 x 3/" 003 1 Jam Nut, 1/-0 00033 1 Hex Nut, 3/-1 11 000 1 Lock Nut, 1/-0 Nylon 0000 1 Lock Washer, 3/" Split
Intentionally Blank
EQUIPMENT AND PARTS WARRANTY Diamond Products warrants all equipment manufactured by it against defects in workmanship or materials for a period of one (1) year from the date of shipment to Customer. The responsibility of Diamond Products under this Warranty is limited to replacement or repair of defective parts at Diamond Products Elyria, Ohio factory, or at a point designated by it, of such parts as shall appear to us upon inspection at such parts, to have been defective in material or workmanship, with expense for transportation and labor borne by Customer. In no event shall Diamond Products be liable for consequential or incidental damages arising out of the failure of any Product to operate properly. Integral units such as engines, electric motors, batteries, transmissions, etc., are excluded from this Warranty and are subject to the prime manufacturer s warranty. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND ALL SUCH OTHER WARRANTIES ARE HEREBY DISCLAIMED. Printed in U.S.A. 333 Prospect Street, Elyria, Ohio 03 (0) 33-1 (00) 31-33 Fax (0) 33- www.diamondproducts.com