International Catalogue. Flat Roof Innovative fastening systems and application expertise

International Catalogue Flat oof Innovative fastening systems and application expertise

Type Content 1 2 3 4 Application index Product index Flat roof fastening systems for steel deck Flat roof fastening systems for concrete deck How to find the right solution? We propose you three different ways to find the correct fastener or system for your specific needs. Flat roof Flat roof fastening systems for steel deck Flat roof fastening systems for concrete deck Flat roof fastening systems for aerated concrete deck Flat roof fastening systems for timber deck Flat roof fastening systems for critical decks Application index Product index Table of contents DT-14-4,8 Fastening of flashings, Carbon steel N-6,3 upstands and terminations Stainless steel IGF-S-T25-8,0 SLG-S Carbon steel SD-H15 / SD / SW3-T / SW3-T-H15 / SL2 / SLG-T / SL2-H15 /SL3-H15 Fastening to steel and timber structure Tools and accessories isofast isotak isoweld Carbon steel I2-4,8 BS-4,8/P45/P75 BS-6,1 I3-4,8 BS3-4,8/P45/P75 BS-6,1/FI--20 Stainless steel I2-S-4,8 BS-S-4,8/P45 BS-S-6,1 BS-S-4,8/P75 BS-S-6,1/FI--20 Carbon steel DT-4,8, DT-6,3 DT-4,8/45 DT-4,8/6,3, DT-4,8/FI--20 TI-6,3 TI-T25-6,3/45 TI-T25-6,3, TI-T25-6,3/FI--20 TIA-T25-6,3/45 TIA-T25-6,3/FI--20 Stainless steel DT-S-4,8 DT-S-4,8/45 DT-S-4,8, DT-S-6,3 DT-S-6,3 DT-S-4,8/FI--20 Carbon steel LBS-T25-8,0 LBS-T25-8,0/45 LBS-T25-8,0 Stainless steel LBS-S-T25-8,0 LBS-S-T25-8,0/45 LBS-S-T25-8,0 Carbon steel IG-6,0 TS-T25-6,0/45 IWF-5,2 IWF-5,2 TS-T25-6,0 IWF-T-B40-5,2 TS-T25-6,0/FI--20 Stainless steel IW-S-5,0 IW-S-5,0 Aluminium TP-L-6,3 TP-L-6,3 Stainless steel Various tools and accessories for isofast, isotak and isoweld Business Solutions and Services Attachment SX / SXW / SLG-S / SL2-S News for your success. 1 2 3 4 5 6 7 8 9 10 11 12 Search by Table of contents A fast way to get an overview over the applications and products is this compact table of contents. 5 6 Flat roof fastening systems for aerated concrete deck Flat roof fastening systems for timber deck 1 Flat roof fastening systems Application index Flat roof fastening systems Steel deck Application index Pos. No. Fastener Plate Sleeve Page isofast IF-70x70 1 I2-4,8 3.3 I-82x40 IF-70x70 2 I2-S-4,8 3.7 I-82x40 IF-70x70 3 I3-4,8 3.11 I-82x40 isotak 4 BS-4,8 5 BS-S-4,8 6 BS3-4,8 P45 P75 P45 P75 P45 P75 3.15 3.20 3.26 1 7 Flat roof fastening systems for critical decks isoweld 9 10 Search by Application index With the application guide, you can search a product and the corresponding chapter via the application. 7 BS-6,1 FI-P-6,8 3.33 8 BS-S-6,1 FI-P-6,8 3.36 9 BS-6,1 FI-P-16,0 FI--20 3.39 10 BS-S-6,1 FI-P-16,0 FI--20 3.42 Material: Stainless steel Carbon steel Plastic 1. 1 8 9 Specialities Fastening to steel and timber structure 2 Flat roof fastening systems Product index Flat roof fastening systems I2-4,8 I2-S -4,8 I3-4,8 BS -4,8 BS-S -4,8 BS3-4,8 BS -6,1 BS-S -6,1 DT-4,8 / DT-6,3 DT-S-4,8 / DT-S-6,3 TI -6,3 TI-T25-6,3 TIA-T25-6,3 LBS-S-T25-8,0 LBS-T25-8,0 IG -6,0 IW-S -5,0 Description Stainless steel Material Carbon steel Aluminium Plastic Product index Chapter - - 3 - - 3 - - 3 - - 3 - - 3 - - 3 - - 3 - - 3 - - 4 - - 4 - - 4 - - 4 - - 4 - - 5 - - 5 - - 6 - - 6 2 Search by Product index A comprehensive specification aid with product drawings and corresponding chapters. IWF -5,2 - - 6 IWF-T-B40-5,2 - - 6 10 11 Tools and accessories Business Solutions and Services News for your success. T S-T25-6,0 TP-L -6,3 DT-14-4,8 - - 6 - - 7 - - 8 Contact information SFS intec AG, Division Construction osenbergsaustrasse 10, CH-9435 Heerbrugg 2. 1 12 Attachment T +41 71 727 62 62 construction@sfsintec.biz, www.sfsintec.biz

Table of contents Flat roof Application index 1 Flat roof fastening systems for steel deck Flat roof fastening systems for concrete deck Flat roof fastening systems for aerated concrete deck Flat roof fastening systems for timber deck Flat roof fastening systems for critical decks Product index Carbon steel isofast isotak isoweld I2-4,8 I3-4,8 BS-4,8/ P45/ P75 BS3-4,8/P45/P75 Stainless steel I2-S-4,8 BS-S-4,8/P45 BS-S-4,8/ P75 Carbon steel Stainless steel DT-4,8, DT-6,3 TI-6,3 DT-S-4,8 DT-S-6,3 DT-4,8/45 TI-T25-6,3/45 TIA-T25-6,3/45 DT-S-4,8/45 BS-6,1 BS-6,1/FI--20 BS-S-6,1 BS-S-6,1/FI--20 Carbon steel LBS-T25-8,0 LBS-T25-8,0/45 LBS-T25-8,0 Stainless steel LBS-S-T25-8,0 LBS-S-T25-8,0/45 LBS-S-T25-8,0 Carbon steel IG-6,0 IWF-5,2 IWF-T-B40-5,2 TS-T25-6,0/45 Stainless steel IW-S-5,0 IW-S-5,0 DT-4,8/6,3, DT-4,8/FI--20 TI-T25-6,3, TI-T25-6,3/FI--20 TIA-T25-6,3/FI--20 DT-S-4,8, DT-S-6,3 DT-S-4,8/FI--20 IWF-5,2 TS-T25-6,0 TS-T25-6,0/FI--20 Aluminium TP-L-6,3 TP-L-6,3 2 3 4 5 6 7 Fastening of flashings, upstands and terminations Carbon steel Stainless steel DT-14-4,8 N-6,3 IGF-S-T25-8,0 SLG-S 8 Carbon steel SD-H15 / SD / SW3-T / SW3-T-H15 / SL2 / SLG-T / SL2-H15 /SL3-H15 Fastening to steel and timber structure Stainless steel SX / SXW / SLG-S / SL2-S 9 Tools and accessories Various tools and accessories for isofast, isotak and isoweld 10 Business Solutions and Services Attachment News for your success. 11 12

Business Solutions flat roof Make life easier for yourself with the complete spectrum of support from SFS intec. Finely-honed fastening solutions are only one part of the comprehensive support package offered by SFS intec. Whether it s a new build or restoration project, we support you all the way from the planning phase through to the construction phase, with a complete money-saving service package. In Chapter 11, learn more about how working with SFS intec can make your job so much easier. Innovative Business Solutions for individual customers Working together and thereby improving efficiency throughout the supply chain can result in: educed costs Optimised processes Transparent information flows We are able to work closely with you and thereby address your specific needs; developing optimum solutions for your particular requirements. Business Solutions from SFS intec simply make life easier. For more information see Chapter 11. SFS intec, if, 02/17, 906 544, E/Int. Technical changes reserved Printed in Switzerland Important The details stated are results of tests and/or calculations and therefore are non-binding and do not represent guaranties or warranted characteristics for not specified applications. All calculations therefore have to be checked and approved by the responsible planner ahead of execution. The user is responsible to assure compliance with all applicable laws and regulations. 02 /2017

Flat roof fastening systems Application index Application index 1Flat roof fastening systems Steel deck 1 9 10 Pos. No. Fastener Plate Sleeve Page isofast 1 I2-4,8 2 I2-S-4,8 3 I3-4,8 IF-70x70 I-82x40 IF-70x70 I-82x40 IF-70x70 I-82x40 3.3 3.7 3.11 isotak 4 BS-4,8 5 BS-S-4,8 6 BS3-4,8 isoweld P45 P75 P45 P75 P45 P75 3.15 3.20 3.26 7 BS-6,1 FI-P-6,8 3.33 8 BS-S-6,1 FI-P-6,8 3.36 9 BS-6,1 FI-P-16,0 FI--20 3.39 10 BS-S-6,1 FI-P-16,0 FI--20 3.42 Material: Stainless steel Carbon steel Plastic 1. 1

Application index Flat roof fastening systems 1 Concrete deck 8 9 10 11 12 13 14 Pos. No. Fastener Plate Sleeve Page isofast 1 DT-4,8 / DT-6,3 2 DT-S-4,8 / DT-S-6,3 3 TI-6,3 isotak ID-70x70 IF/IG-C-82x40 ID-82x40 ID-70x70 IF/IG-C-82x40 ID-82x40 ID-70x70 IF/IG-C-82x40 ID-82x40 4.3 4.7 4.13 4 DT-4,8 45 4.18 5 DT-S-4,8 45 4.22 6 TI-T25-6,3 45 4.26 7 TIA-T25-6,3 45 4.31 isoweld 8 DT-4,8 / DT-6,3 FI-P-6,8 4.38 9 DT-S-4,8 / DT-S-6,3 FI-P-6,8 4.42 10 TI-T25-6,3 FI-P-6,8 4.46 11 DT-4,8 FI-P-16,0 FI--20 4.52 12 DT-S-4,8 FI-P-16,0 FI--20 4.56 13 TI-T25-6,3 FI-P-16,0 FI--20 4.60 14 TIA-T25-6,3 FI-P-16,0 FI--20 4.64 Material: Stainless steel Carbon steel Plastic 1. 2

Flat roof fastening systems Application index Aerated concrete deck 1 Pos. No. Fastener Plate Sleeve Page isofast 1 LBS-S-T25-8,0 2 LBS-T25-8,0 isotak ID-70x70 IF/IG-C-82x40 ID-82x40 ID-70x70 IF/IG-C-82x40 ID-82x40 5.3 5.6 3 LBS-S-T25-8,0 45 5.9 4 LBS-T25-8,0 45 5.12 isoweld 5 LBS-S-T25-8,0 FI-P-6,8 5.16 6 LBS-T25-8,0 FI-P-6,8 5.19 Material: Stainless steel Carbon steel Plastic 1. 3

Application index Flat roof fastening systems 1 Timber deck / warm roof Pos. No. Fastener Plate Sleeve Page isofast 1 IG-6,0 ID-70x70 ID-82x40 6.2 2 IW-S-5,0 IC/W-82x40 6.6 3 IWF-5,2 IC/W-82x40 6.9 4 IWF-T-B40-5,2 MW-40-FH 6.13 isotak 5 TS-T25-6,0 45 6.17 isoweld 6 IWF-5,2 FI-P-6,8 6.23 7 TS-T25-6,0 FI-P-6,8 6.26 8 IW-S-5,0 FI-P-6,0 FI--20 6.29 9 TS-T25-6,0 FI-P-16,0 FI--20 6.32 Material: Stainless steel Carbon steel Plastic 1. 4

Flat roof fastening systems Application index Timber deck / cold roof 1 Pos. No. Fastener Plate Sleeve Page isofast 1 IW-S-5,0 IC/W-82x40 6.6 2 IWF-5,2 IC/W-82x40 6.9 3 IWF-T-B40-5,2 MW-40-FH 6.13 isoweld 4 IWF-5,2 FI-P-6,8 6.23 4 IW-S-5,0 FI-P-6,8 6.29 Material: Stainless steel Carbon steel Plastic 1. 5

Application index Flat roof fastening systems 1 Critical deck Pos. No. Fastener Plate Sleeve Page isofast 1 TP-L-6,3 isoweld ID-70x70 IF/IG-C-82x40 ID-82x40 7.3 2 TP-L-6,3 FI-P-6,8 7.7 Material: Stainless steel Carbon steel Plastic 1. 6

Flat roof fastening systems Application index Specialities 1 Pos. No. Fastener Page 1 DT-14-4,8 8.2 2 N-6,3 8.4 3 IGF-S-T25-8,0 8.7 4 SLG-S 8.9 Material: Stainless steel Carbon steel Plastic 1. 7

Application index Flat roof fastening systems 1 Fastening to steel and timber structure Pos. No. Fastener Page 1 SX 9.2 2 SD 9.4 3 SXW 9.6 4 SW3 9.6 5 SLG-S 9.9 6 SL 9.9 Material: Stainless steel Carbon steel Plastic 1. 8

Flat roof fastening systems 2Product index Flat roof fastening systems Type I2-4,8 I2-S-4,8 I3-4,8 BS-4,8 BS-S-4,8 BS3-4,8 BS-6,1 BS-S-6,1 DT-4,8 / DT-6,3 DT-S-4,8 / DT-S-6,3 TI-6,3 TI-T25-6,3 TIA-T25-6,3 LBS-S-T25-8,0 LBS-T25-8,0 IG-6,0 IW-S-5,0 IWF-5,2 IWF-T-B40-5,2 Description Stainless steel Material Carbon steel Aluminium Plastic Product index Chapter - - 3 - - 3 - - 3 - - 3 - - 3 - - 3 - - 3 - - 3 - - 4 - - 4 - - 4 - - 4 - - 4 - - 5 - - 5 - - 6 - - 6 - - 6 2 - - 6 TS-T25-6,0 TP-L-6,3 DT-14-4,8 - - 6 - - 7 - - 8 2. 1

Product index Flat roof fastening systems 2 Type N-6,3 Description Stainless steel Material Carbon steel Aluminium Plastic Chapter - - 8 IGF-S-T25-8,0 - - 8 SX - - 9 SD-H15 - - 9 SD - - 9 SXW - - 9 SW3-T - - 9 SW3-T-H15 - - 9 SLG-S / SLG - 9 SL2-S - - 9 SL2-H15 / SL3-H15 - - 9 IF-70x70 IF - - 3 ID-70x70 ID - - 4/5/6/7 I-82x40 - - 3 I IF/IG-C-82x40 IF/IG-C - - 4/5/7 ID-82x40 - - 4/5/6/7 ID 2. 2

Flat roof fastening systems Product index Type IC/W-82x40 Description Stainless steel Material Carbon steel Aluminium Plastic Chapter 2 - - 6 IC/W MW-40-FH - - 6 FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM - - 3/4/5/ 6/7 FI-P-16,0-PVC FI-P-16,0-TPO FI-P-16,0-EPDM - - 3/4/6 BS/P45 pre-assembled - 3 BS-S/P45 pre-assembled - 3 P45 - - 3 45 - - 4/5/6 P75 - - 3 FI--20 - - 3/4/6 2. 3

Product index Flat roof fastening systems 2 Type IF240-B Description New: Battery version! Stainless steel Material Carbon steel Aluminium Plastic Chapter - - - 10 IF240 - - - 10 IF80-L / IF80-S - - - 10 IC120 - - - 10 ZD15 - - - 4/8/10 DP11 - - - 10 MV 28-500 MV 28-750 - - - 6/10 2. 4

Flat roof fastening systems Product index Type IP50-B Description New: Battery version! Stainless steel Material Carbon steel Aluminium Plastic Chapter - - - 7/10 2 TAUUS 2 Peel ivet - - - 7/10 IT260-B New: Battery version! - - - 3/10 IT260 - - - 3/10 IT19 - - - 3/4/10 2. 5

Product index Flat roof fastening systems 2 Type SDS HSS Description Stainless steel Material Carbon steel Aluminium Plastic Chapter - - - 10 - - - 10 ZVK-STOP - - - 10 ZVK - - - 10 ZAK-500 / ZAK-750 ZAK-1000 - - - 10 DT-M-500, DT-M-750 - - - 10 AJ60x130-TIA - - - 10 AJ-M6 - - - 10 ZA1/4 -M6-300 ZA1/4 -M6-750 ZA1/4 -M6-EXT100 - - - 10 - - - 10 ZH-11-ING - - - 10 Insert bits - - - 10 ZD-100 - - - 10 ZDM-1000 - - - 10 Waist bag - - - 10 ASCS 6.3 18V FEIN - - - 9/10 2. 6

Flat roof fastening systems Product index Type FI-Pad isoweld 3000 Description Stainless steel Material Carbon steel Aluminium Plastic Chapter 2-3/4/5 - - 10 6/7 FI-H - - - 10 FI-Magnet Set - - - 10 FI80-L / FI80-S - - - 10 FI80-T19 - - - 10 2. 7

Flat roof fastening systems for steel deck Self drilling fasteners, stress plates and plastic sleeves 3ofast sten eners and stress plates Product code Pa ge Ca rbon ste teele I2-4,8 IF-70x70 7 / I-82x40 3. 3 Aust enitic ic sta tain inle ss ste teelel I2- S-4, 4,8 IF-70x 0x70 / I-82 82x40 3.7 Carbon steelel I 3-4, 8 IF -70x 70 / I-82x4 0 3. 11 3 isotak Fast eners and plastic slee ves Product co de Pa ge Carbon steele BS-4,8 P45 / P75 3.15 Au steniticic stainless steele BS-S-4,8 P45 / P75 3. 20 Carb rbon ste el BS3-4, 8 P45 / P75 3.26 isow owel d Fasteners, str tres ess pl ates and pl as tic sleeve ves Prod uct code Pa ge Carb rbon steel, full met al lic BS-6,1 FI-P-6,8-P -PVC FI-P -P-6,8-T -TPO FI -P-6,8 -EPD PDM 3.333 Austenit iticic stain less steel, fu ll met allic BS-S-6,1 FI -P -6,8-PVC FI -P-6,8-TPO FI-P-6,8-EPD PDM 3.36 36 Carbon steel, sleeve system BS-6,1 FI-P-16, 0-PV C FI-P -16, 0-TPO FI-P-16,0-EPDM FI--20 3.39 Austenitic stainless steel, sleeve system BS-S-6,1 FI-P-16,0-PVC FI-P-16,0-TPO FI -P-16,0-EPDM FI--20 3.42 3. 1

Flat roof fastening systems for steel deck 3 Today, more than ever, it is essential that the mechanical fastening of insulation and membrane on flat roofs is both fast and efficient. It is equally imperative that these fasteners are installed correctly and thereby function properly throughout the expected life of the roof construction. Flat roof fastening systems are subjected to a wide range of thermal, static and dynamic stresses. Correct design is therefore essential to ensure that required performance criterion is achieved. Excellent corrosion resistance is also critical, with environment-friendly coatings of increasing importance. SFS intec have been setting the standards for fastener performance in flat roof applications for many years. The complete fastening systems offer quality, cost effective and innovative fastening solutions. A treadfast fastener and stress plate combination ensures that the system is safe to walk on Most of the products are available in austenitic stainless steel A complete system featuring the IF240 setting tool for rapid fixing of magazine loaded fasteners Maximum corrosion resistance with safe, chromium VI-free Durocoat coatings A significant part of the installation cost lies in the manual handling of the fasteners. The IF240 setting tool features automatic feeding of the fasteners and stress plates. This provides a completely automated and controlled installation process from beginning to end. The result is that the subsequent installation speed is many times faster than traditional means and the process offers substantial ergonomic benefits to the installer. Should fastener applications be required in a corrosive atmosphere (for example within environments of high relative humidity, in acid or waste treatment plants, chloride or marine environments), austenitic stainless steel fasteners are recommended. For other applications, the Durocoat chromium VI-free surface coating offers excellent protection, whilst meeting exacting current environmental standards. 3. 2

Flat roof fastening systems for steel deck Carbon steel self drilling fastener isofast I2-4,8 isofast I2-4,8 Technical information Application For the fastening of waterproof membrane and insulation to steel deck. For steel deck thicknesses of between min. 0,63 mm and max. 2 x 1,25 mm. 3 Material Fastener I2-4,8 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Stress plates IF-70x70 / I-82x40 Steel 1,0 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates IF-70x70 I-82x40 Stress plate for insulation, hole diameter 5,1 mm Stress plate for membrane and insulation, hole diameter 5,1 mm 3. 3

Carbon steel self drilling fastener Flat roof fastening systems for steel deck isofast I2-4,8 Technical information Tools and accessories ecommendation for installation ZA1/4 E380 3 Power screwdriver - 1000-3000 rpm - Min. 500 W Battery tool - 1000-3000 rpm - Min. 18 V - Battery with min. 2,5 Ah Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool IF80-L IF80-S IF240 New: Battery version! Stand-up setting tool for the installation of isofast fasteners and stress plates Stand-up setting tool for the installation of isofast fasteners and stress plates Automated setting tool for the installation of belted isofast fasteners and stress plates 3. 4

Flat roof fastening systems for steel deck Carbon steel self drilling fastener isofast I2-4,8 Order information d Hexagon 8 mm KL L TL KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code I2-60 Product / Application Approval Type d L KL Application information 3 Carbon steel ETA-08/0262 APPOVED TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 I2- I2- I2- I2- I2- I2- I2- I2- I2- I2- I2- I2- I2- I2- I2-60 70 80 90 100 120 140 160 180 200 220 240 260 280 300 40 50 60 70 80 100 120 140 160 180 200 220 240 260 280 t KL Clamping length KL: Total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane Screw length L: L min. = KL + 20 mm Thread length TL: Fastener length 60-80 mm: TL = L - 15 mm Fastener length 90-300 mm: TL = 75 mm t min. steel: 0,63 mm t max. steel: 2 x 1,25 mm Stress plates IF-70X70 I-82X40 IF ETA-08/0262 ETA-08/0262 APPOVED APPOVED I 3. 5

Carbon steel self drilling fastener Flat roof fastening systems for steel deck isofast I2-4,8 Order information d Hexagon 8 mm belted KL L TL 3 KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code I2- M- 60 Product / Application Approval Type M d L KL Application information Carbon steel ETA-08/0262 APPOVED I2- I2- I2- I2- I2- I2- I2- I2- I2- I2- I2- I2- M- M- M- M- M- M- M- M- M- M- M- M- 60 70 80 90 100 120 140 160 180 200 220 240 40 50 60 70 80 100 120 140 160 180 200 220 t KL Clamping length KL: Total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane t min. steel: 0,63 mm t max. steel: 2 x 1,25 mm TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 Screw length L: L min. = KL + 20 mm Thread length TL: Fastener length 60-80 mm: TL = L - 15 mm Fastener length 90-300 mm: TL = 75 mm Setting The belted fasteners can only be used with the IF240 setting tool. Stress plates IF-70X70 I-82X40 IF ETA-08/0262 ETA-08/0262 APPOVED APPOVED I 3. 6

Flat roof fastening systems for steel deck Austenitic stainless steel self drilling fastener isofast I2-S-4,8 isofast I2-S-4,8 Technical information Application For the fastening of insulation to steel deck. For steel deck thicknesses of between min. 0,63 mm and max. 2 x 1,0 mm. For applications with internal relative humidity higher than 70%, chemically agressive atmospheres / conditions, locations with agressive local conditions (e.g. coastal environments). For refurbishment applications with unknown condition of the existing build-up or build-up with abrasive layers that may damage the corrosion protection. If extended design life / warranty is required. 3 Material Fastener I2-S-4,8 Austenitic stainless steel, grade AISI 316, European Standard 1.4401, grade A4 Drill point and lead thread section: Fused and hardened carbon steel, length 13 mm, corrosion protected Stress plates IF-70x70 / I-82x40 Steel 1,0 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates IF-70x70 I-82x40 Stress plate for insulation, hole diameter 5,1 mm Stress plate for membrane and insulation, hole diameter 5,1 mm 3. 7

Austenitic stainless steel self drilling fastener Flat roof fastening systems for steel deck isofast I2-S-4,8 Technical information Tools and accessories ecommendation for installation ZA1/4 E380 3 Power screwdriver - 1000-3000 rpm - Min. 500 W Battery tool - 1000-3000 rpm - Min. 18 V - Battery with min. 2,5 Ah Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool IF80-L IF80-S IF240 New: Battery version! Stand-up setting tool for the installation of isofast fasteners and stress plates Stand-up setting tool for the installation of isofast fasteners and stress plates Automated setting tool for the installation of belted isofast fasteners and stress plates 3. 8

Flat roof fastening systems for steel deck Austenitic stainless steel self drilling fastener isofast I2-S-4,8 Order information d Hexagon 8 mm KL L TL KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code I2-S- 60 Product / Application Approval Type d L KL Application information 3 Stainless steel ETA-08/0262 I2-S- I2-S- I2-S- I2-S- I2-S- I2-S- I2-S- I2-S- I2-S- I2-S- I2-S- I2-S- 60 80 100 120 140 160 180 200 220 240 260 300 40 60 80 100 120 140 160 180 200 220 240 280 t KL t min. steel: 0,63 mm t max. steel: 2 x 1,0 mm Clamping length KL: Total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane Screw length L: L min. = KL + 20 mm Thread length TL: Fastener length 60-80 mm: TL = L - 15 mm Fastener lenght 100-300 mm: TL = 75 mm Availability: Availability of lengths 260 mm and 300 mm on request. Stress plates IF-70X70 I-82X40 IF ETA-08/0262 ETA-08/0262 APPOVED APPOVED I 3. 9

Austenitic stainless steel self drilling fastener Flat roof fastening systems for steel deck isofast I2-S-4,8 Order information d Hexagon 8 mm belted KL L TL 3 KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm Order code I2-S- M- 60 Product / Application Approval Type M d L KL Application information Stainless steel I2-S- I2-S- I2-S- I2-S- I2-S- I2-S- I2-S- I2-S- I2-S- I2-S- M- M- M- M- M- M- M- M- M- M- 60 80 100 120 140 160 180 200 220 240 40 60 80 100 120 140 160 180 200 220 t KL Clamping length KL: Total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane t min. steel: 0,63 mm t max. steel: 2 x 1,0 mm ETA-08/0262 Screw length L: L min. = KL + 20 mm Thread length TL: Fastener length 60-80 mm: TL = L - 15 mm Fastener lenght 100-240 mm: TL = 75 mm Setting The belted fasteners can only be used with the IF240 setting tool. Availability: Availability on request. Please consult your SFS representative for further information. Stress plates IF-70X70 I-82X40 IF ETA-08/0262 ETA-08/0262 APPOVED APPOVED I 3. 10

Flat roof fastening systems for steel deck Carbon steel self drilling fastener isofast I3-4,8 isofast I3-4,8 Technical information Application For the fastening of waterproof membrane and insulation to steel deck. For steel deck thicknesses of between min. 1,0 mm and max. 2 x 1,5 mm. 3 Material Fastener I3-4,8 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Stress plates IF-70x70 / I-82x40 Steel 1,0 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates IF-70x70 I-82x40 Stress plate for insulation, hole diameter 5,1 mm Stress plate for membrane and insulation, hole diameter 5,1 mm 3. 11

Carbon steel self drilling fastener Flat roof fastening systems for steel deck isofast I3-4,8 Technical information Tools and accessories ecommendation for installation ZA1/4 E380 3 Power screwdriver - 1000-3000 rpm - Min. 500 W Battery tool - 1000-3000 rpm - Min. 18 V - Battery with min. 2,5 Ah Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool IF80-L IF80-S IF240 New: Battery version! Stand-up setting tool for the installation of isofast fasteners and stress plates Stand-up setting tool for the installation of isofast fasteners and stress plates Automated setting tool for the installation of belted isofast fasteners and stress plates 3. 12

Flat roof fastening systems for steel deck Carbon steel self drilling fastener isofast I3-4,8 Order information d Hexagon 8 mm KL L TL KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code I3-60 Product / Application Approval Type d L KL Application information Carbon steel ETA-08/0262 I3- I3- I3- I3- I3- I3- I3- I3- I3- I3- I3- I3- I3-60 80 100 120 140 160 180 200 220 240 260 280 300 40 60 80 100 120 140 160 180 200 220 240 260 280 t KL Clamping length KL: Total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane Screw length L: L min. = KL + 20 mm t min. steel: 1,0 mm t max. steel: 2 x 1,5 mm 3 Thread length TL: Fastener length 60-80 mm: TL = L - 13,5 mm Fastener lenght 100-300 mm: TL = 75 mm Availability: Availability of belted fasteners on request. Stress plates IF-70X70 I-82X40 IF ETA-08/0262 ETA-08/0262 APPOVED APPOVED I 3. 13

Flat roof fastening systems for steel deck fastening systems: Cost effective solutions for increased insulation requirements 3 The convincing advantages of the systems New: Battery version! The system: Fast, ergonomic and secure A complete range 3. 14

Flat roof fastening systems for steel deck Carbon steel self drilling fastener isotak BS-4,8 isotak BS-4,8 Technical information Application For the fastening of waterproof membrane and insulation to steel deck. For steel deck thicknesses of between min. 0,63 mm and max. 2 x 1,25 mm. 3 Material Fastener BS-4,8 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Sleeves P45 / P75 High quality polypropylene, PP Sleeves P45 P75 Sleeve for membrane and insulation, head diameter 45 mm Sleeve for insulation, head diameter 75 mm 3. 15

Carbon steel self drilling fastener Flat roof fastening systems for steel deck isotak BS-4,8 Technical information Tools and accessories ecommendation for installation ZA1/4 -M6-300/750 T25-32-M6-ING 3 Power screwdriver - 1000-3000 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool Battery tool - 1000-3000 rpm - Min. 18 V - Battery with min. 2,5 Ah IT19 IT260 New: Battery version! Stand-up setting tool for the installation of isotak fasteners and sleeves - Automated setting tool for the installation of pre-assembled isotak fasteners and sleeves - Only applicable with P45 3. 16

Flat roof fastening systems for steel deck Carbon steel self drilling fastener isotak BS-4,8 Order information d d T25 Ø 8,9 mm TL L L KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code BS- 60 Product / Application Approval Type d L Application information Carbon steel Plastic ETA-08/0262 APPOVED TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- P P P P P P P 60 70 80 90 100 110 120 130 140 150 170 190 200 220 240 260 300 30 60 90 120 150 180 210 t t KL KL Thread length TL: Fastener length 50-80 mm: TL = L - 5 mm Fastener length 90-300 mm: TL = 75 mm KL see combination table t min. steel: 0,63 mm t max. steel: 2 x 1,25 mm 3 Plastic P P P P P 75x 75x 75x 75x 75x 30 60 90 120 150 KL see combination table ETA-08/0262 APPOVED 3. 17

Carbon steel self drilling fastener Flat roof fastening systems for steel deck isotak P45 / BS-4,8 pre-assembled Order information d T25 Ø 8,9 mm KL 3 KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code P60/ BS-60 Product / Application Approval Sleeve Screw KL * ** Application information Carbon steel Plastic ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 P60/ P60/ P60/ P90/ P90/ P90/ P120/ P120/ P120/ P150/ P150/ P150/ P150/ P150/ P150/ P150/ P180/ P180/ P180/ P180/ BS-60 BS-70 BS-80 BS-60 BS-70 BS-80 BS-60 BS-70 BS-80 BS-60 BS-70 BS-80 BS-90 BS-110 BS-130 BS-150 BS-60 BS-80 BS-100 BS-120 75 85 95 105 115 125 135 145 155 165 175 185 195 215 235 255 195 215 235 255 t KL t min. steel: 0,63 mm t max. steel: 2 x 1,25 mm Availability: Availability of pre-assembled fastening elements on request. Availability of further combinations on request. Setting: * Use of setting tool IT260 possible ** Use of setting tool IT19 possible 3. 18

Flat roof fastening systems for steel deck 3 3. 19

Austenitic stainless steel self drilling fastener Flat roof fastening systems for steel deck isotak BS-S-4,8 isotak BS-S-4,8 3 Technical information Application For the fastening of insulation to steel deck. For steel deck thicknesses of between min. 0,63 mm and max. 2 x 1,0 mm. For applications with internal relative humidity higher than 70%, chemically agressive atmospheres / conditions, locations with agressive local conditions (e.g. coastal environments). For refurbishment applications with unknown condition of the existing build-up or build-up with abrasive layers that may damage the corrosion protection. If extended design life / warranty is required. Material Fastener BS-S-4,8 Austenitic stainless steel, grade AISI 316, European Standard 1.4401, grade A4 Drill point and lead thread section: Fused and hardened carbon steel, length 13 mm, corrosion protected Sleeves P45 / P75 High quality polypropylene, PP Sleeves P45 P75 Sleeve for membrane and insulation, head diameter 45 mm Sleeve for insulation, head diameter 75 mm 3. 20

Flat roof fastening systems for steel deck Austenitic stainless steel self drilling fastener isotak BS-S-4,8 Technical information Tools and accessories ecommendation for installation ZA1/4 -M6-300/750 T25-32-M6-ING 3 Power screwdriver - 1000-3000 rpm - Min. 500 W Battery tool - 1000-3000 rpm - Min. 18 V - Battery with min. 2,5 Ah Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool IT19 IT260 New: Battery version! Stand-up setting tool for the installation of isotak fasteners and sleeves - Automated setting tool for the installation of pre-assembled isotak fasteners and sleeves - Only applicable with P45 3. 21

Austenitic stainless steel self drilling fastener Flat roof fastening systems for steel deck isotak BS-S-4,8 Order information d d T25 Ø 8,9 mm TL L L 3 KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code BS-S- 60 Product / Application Approval Type d L Application information Stainless steel BS-S- BS-S- BS-S- BS-S- BS-S- BS-S- BS-S- BS-S- 60 80 100 120 140 160 180 200 t KL t min. steel: 0,63 mm t max. steel: 2 x 1,0 mm KL ETA-08/0262 Thread length TL: Fastener length 60-80 mm: TL = L - 5 mm Fastener length 100-200 mm: TL = 75 mm t Plastic ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 P P P P P P P 30 60 90 120 150 180 210 KL see combination table Plastic P P P P P 75x 75x 75x 75x 75x 30 60 90 120 150 KL see combination table ETA-08/0262 APPOVED 3. 22

Flat roof fastening systems for steel deck Austenitic stainless steel self drilling fastener isotak P45 / BS-S-4,8 pre-assembled Order information TL L d d L T25 Ø 8,9 mm KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code P60/ BS-S-60 Product / Application Approval Sleeve Screw KL * ** Application information Stainless steel Plastic ETA-08/0262 P60/ P60/ P90/ P90/ P120/ P120/ P150/ P150/ P150/ P150/ P150/ P180/ P180/ P180/ P180/ BS-S-60 BS-S-80 BS-S-60 BS-S-80 BS-S-60 BS-S-80 BS-S-60 BS-S-80 BS-S-100 BS-S-120 BS-S-140 BS-S-60 BS-S-80 BS-S-100 BS-S-120 75 95 105 125 135 155 165 185 205 225 245 195 215 235 255 t KL t min. steel: 0,63 mm t max. steel: 2 x 1,0 mm Availability: Availability of pre-assembled fastening elements on request. Availability of further combinations on request. Setting: * Use of setting tool IT260 possible ** Use of setting tool IT19 possible 3 3. 23

Combination table Flat roof fastening systems for steel deck isotak BS-4,8 / BS-S-4,8 / P45 3 COMBINATION CALCULATION 3. 24

Flat roof fastening systems for steel deck Combination table isotak BS-4,8 / BS-S-4,8 / P75 COMBINATION CALCULATION 3 3. 25

Carbon steel self drilling fastener Flat roof fastening systems for steel deck isotak BS3-4,8 isotak BS3-4,8 3 Technical information Application For the fastening of waterproof membrane and insulation to steel deck. For steel deck thicknesses of between min. 1,0 mm and max. 2 x 1,5 mm. Material Fastener BS3-4,8 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Sleeves P45 / P75 High quality polypropylene, PP Sleeves P45 P75 Sleeve for membrane and insulation, head diameter 45 mm Sleeve for insulation, head diameter 75 mm 3. 26

Flat roof fastening systems for steel deck Carbon steel self drilling fastener isotak BS3-4,8 Technical information Tools and accessories ecommendation for installation ZA1/4 -M6-300/750 T25-32-M6-ING 3 Power screwdriver - 1000-3000 rpm - Min. 500 W Battery tool - 1000-3000 rpm - Min. 18 V - Battery with min. 2,5 Ah Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool IT19 IT260 New: Battery version! Stand-up setting tool for the installation of isotak fasteners and sleeves - Automated setting tool for the installation of pre-assembled isotak fasteners and sleeves - Only applicable with P45 3. 27

Carbon steel self drilling fastener Flat roof fastening systems for steel deck isotak BS3-4,8 Order information d d T25 Ø 8,9 mm TL L L 3 KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code BS3-90 Product / Application Approval Type d L Application information Carbon steel BS3-90 KL t min. steel: 1,0 mm t max. steel: 2 x 1,5 mm t ETA-08/0262 KL TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 t Thread length TL: TL = 75 mm Availability: Availability of pre-assembled fastening elements on request. Plastic ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 P P P P P P P 30 60 90 120 150 180 210 KL see combination table Plastic P P P P P 75x 75x 75x 75x 75x 30 60 90 120 150 KL see combination table ETA-08/0262 APPOVED 3. 28

Flat roof fastening systems for steel deck Combination tabe isotak BS3-4,8 / P45 COMBINATION CALCULATION KL 3 3. 29

Combination table Flat roof fastening systems for steel deck isotak BS3-4,8 / P75 3 COMBINATION CALCULATION 3. 30

Flat roof fastening systems for steel deck 3 3. 31

Flat roof fastening systems for steel deck 3 The new SFS intec system is a revolutionary, non-penetrating field fastening system for flat roofs. follows on from the triedand-trusted and systems in offering another economical, secure and permanent method of fixing insulation material and membranes on flat roofs. The system, developed entirely by SFS intec, is ideal for PVC, TPO and EPDM membranes. The stress plates used to secure the insulation to the roof are welded to it by inductive heating, creating a non-penetrating connection. The weld is achieved using the 3000 induction tool, developed in-house, which is equipped with an array of safety functions. These include a search-and-control function, automatic temperature variation control and mains current fluctuation compensation. Fixing is independent of the membrane joints Only one membrane width is needed No additional insulation fixing No membrane penetration educed membrane overlaps Coverage independent of fixing progress so much quicker Fewer fixing points Ergonomic, upright installation with height adjustable handle Simple, user-friendly display with integrated counter Temperature compensation function automatically adapts to variations in temperature Automatic adjustment to power fluctuations Search-and-control function allows only perfect welds Acoustic and visual indicators at the start and finish of each weld Additional hand inductor for tight spaces and vertical welds 3. 32

Flat roof fastening systems for steel deck Carbon steel self drilling fastener isoweld BS-6,1 isoweld BS-6,1 Technical information Application For the fastening of waterproof membrane and insulation to steel deck. For steel deck thicknesses of between min. 0,63 mm and max. 2 x 1,25 mm. 3 Material Fastener BS-6,1 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Stress plate FI-P-6,8-PVC / FI-P-6,8-TPO FI-P-6,8-EPDM Steel 0,8 mm esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm 3. 33

Carbon steel self drilling fastener Flat roof fastening systems for steel deck isoweld BS-6,1 Technical information Tools and accessories ecommendation for installation Bit holder ZA1/4 T25-25-HEX1/4 3 Power screwdriver - 1000-3000 rpm - Min. 500 W Battery tool - 1000-3000 rpm - Min. 18 V - Battery with min. 2,5 Ah Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool FI80-L FI80-S isoweld 3000 / FI-H / FI-Magnet Set Stand-up setting tool for the installation of isoweld fasteners and stress plates Stand-up setting tool for the installation of isoweld fasteners and stress plates Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates FI-Pad Cardboard pad for applications on EPS/XPS insulation 3. 34

Flat roof fastening systems for steel deck Carbon steel self drilling fastener isoweld -BS-6,1 Order information d T25 Ø 9,7 mm KL TL L KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code BS- 6,1x 60 Product / Application Approval Type d L KL Application information Carbon steel NEW: FM Approval! ETA-08/0262 APPOVED TEKNISK GODKJENNING BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 60 70 80 90 100 120 140 160 180 200 220 240 260 280 300 40 50 60 70 80 100 120 140 160 180 200 220 240 260 280 t KL Build-up: Insulation compressive strength at 10% compression min. 0,1 N/mm 2. Clamping length KL: Total roof build-up between top edge substrate and top edge insulation t min. steel: 0,63 mm t max. steel: 2 x 1,25 mm 3 SINTEFF Certificaton TG 2137 KL = thickness vapour barrier + thickness insulation Screw length L: L min. = KL + 20 mm Thread length TL: Fastener length 35-70 mm: TL = L - 3 mm Fastener length 80-300 mm: TL = 75 mm Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 3. 35

Austenitic stainless steel self drilling fastener Flat roof fastening systems for steel deck isoweld BS-S-6,1 isoweld BS-S-6,1 3 Technical information Application For the fastening of waterproof membrane and insulation to steel deck. For steel deck thicknesses of between min. 0,63 mm and max. 2 x 1,0 mm. For applications with internal relative humidity higher than 70%, chemically agressive atmospheres / conditions, locations with agressive local conditions (e.g. coastal environments). For refurbishment applications with unknown condition of the existing build-up or build-up with abrasive layers that may damage the corrosion protection. If extended design life / warranty is required. Material Fastener BS-S-6,1 Austenitic stainless steel, grade AISI 316, European Standard 1.4401, grade A4 Drill point and lead thread section: Fused and hardened carbon steel, length 13 mm, corrosion protected Stress plate FI-P-6,8-PVC / FI-P-6,8-TPO FI-P-6,8-EPDM Steel 0,8 mm esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm 3. 36

Flat roof fastening systems for steel deck Austenitic stainless steel self drilling fastener isoweld BS-S-6,1 Technical information Tools and accessories ecommendation for installation Bit holder ZA1/4 T25-25-HEX1/4 3 Power screwdriver - 1000-3000 rpm - Min. 500 W Battery tool - 1000-3000 rpm - Min. 18 V - Battery with min. 2,5 Ah Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool FI80-L FI80-S isoweld 3000 / FI-H / FI-Magnet Set Stand-up setting tool for the installation of isoweld fasteners and stress plates Stand-up setting tool for the installation of isoweld fasteners and stress plates Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates FI-Pad Cardboard pad for applications on EPS/XPS insulation 3. 37

Austenitic stainless steel self drilling fastener Flat roof fastening systems for steel deck isoweld BS-S-6,1 Order information d T25 Ø 9,7 mm KL TL L 3 KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code BS-S- 6,1x 60 Product / Application Approval Type d L KL Application information Stainless steel BS-S- BS-S- BS-S- BS-S- BS-S- BS-S- 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 60 80 100 120 140 160 40 60 80 100 120 140 t KL t min. steel: 0,63 mm t max. steel: 2 x 1,0 mm Build-up: Insulation compressive strength at 10% compression min. 0,1 N/mm 2. ETA-08/0262 Clamping length KL: Total roof build-up between top edge substrate and top edge insulation KL = thickness vapour barrier + thickness insulation Screw length L: L min. = KL + 20 mm Thread length TL: Fastener length 60 mm: TL = 57 mm Fastener length 80-160 mm: TL = 75 mm Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 3. 38

Flat roof fastening systems for steel deck Carbon steel self drilling fastener isoweld BS-6,1 isoweld BS-6,1 Technical information Application For the fastening of waterproof membrane and insulation to steel deck. For steel deck thicknesses of between min. 0,63 mm and max. 2 x 1,25 mm. 3 Material Fastener BS-6,1 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Sleeve FI--20 High quality polyamide, PA Stress plate FI-P-16,0-PVC / FI-P-16,0-TPO FI-P-16,0-EPDM Steel 0,8 mm esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates FI-P-16,0-PVC FI-P-16,0-TPO FI-P-16,0-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Sleeves FI--20 Sleeve for the isoweld system, head diameter 20 mm 3. 39

Carbon steel self drilling fastener Flat roof fastening systems for steel deck isoweld BS-6,1 Technical information Tools and accessories ecommendation for installation ZA1/4 -M6-300/750 T25-32-M6 3 Power screwdriver - 1000-3000 rpm - Min. 500 W Battery tool - 1000-3000 rpm - Min. 18 V - Battery with min. 2,5 Ah Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool FI80-T19 isoweld 3000 / FI-H / FI-Magnet Set FI-Pad Stand-up setting tool for the installation of isoweld fasteners, stress plates and sleeves Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates Cardboard pad for applications on EPS/XPS insulation 3. 40

Flat roof fastening systems for steel deck Carbon steel self drilling fastener isoweld BS-6,1 Order information d d T25 Ø 9,7 mm TL L L KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code BS- 6,1x 60 Product / Application Approval Type d L Application information Carbon steel NEW: FM Approval! ETA-08/0262 APPOVED TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- BS- 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 6,1x 60 70 80 90 100 120 140 160 180 200 220 240 260 280 300 t KL Thread length TL: Fastener length 35-70 mm: TL = L - 3 mm Fastener length 80-300 mm: TL = 75 mm t min. steel: 0,63 mm t max. steel: 2 x 1,25 mm 3 Plastic NEW: FM Approval! ETA-08/0262 APPOVED FI-- FI-- FI-- FI-- FI-- FI-- FI-- FI-- 20x 20x 20x 20x 20x 20x 20x 20x 40 70 100 130 160 190 230 300 KL see combination table Stress plates FI-P-16,0-PVC FI-P-16,0-TPO FI-P-16,0-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 3. 41

Austenitic stainless steel self drilling fastener Flat roof fastening systems for steel deck isoweld BS-S-6,1 isoweld BS-S-6,1 3 Technical information Application For the fastening of waterproof membrane and insulation to steel deck. For steel deck thicknesses of between min. 0,63 mm and max. 2 x 1,0 mm. For applications with internal relative humidity higher than 70%, chemically agressive atmospheres / conditions, locations with agressive local conditions (e.g. coastal environments). For refurbishment applications with unknown condition of the existing build-up or build-up with abrasive layers that may damage the corrosion protection. If extended design life / warranty is required. Material Fastener BS-S-6,1 Austenitic stainless steel, grade AISI 316, European Standard 1.4401, grade A4 Drill point and lead thread section: Fused and hardened carbon steel, length 13 mm, corrosion protected Sleeve FI--20 High quality polyamide, PA Stress plate FI-P-16,0-PVC / FI-P-16,0-TPO FI-P-16,0-EPDM Steel 0,8 mm esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates FI-P-16,0-PVC FI-P-16,0-TPO FI-P-16,0-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Sleeves FI--20 Sleeve for the isoweld system, head diameter 20 mm 3. 42

Flat roof fastening systems for steel deck Austenitic stainless steel self drilling fastener isoweld BS-S-6,1 Technical information Tools and accessories ecommendation for installation ZA1/4 -M6-300/750 T25-32-M6 3 Power screwdriver - 1000-3000 rpm - Min. 500 W Battery tool - 1000-3000 rpm - Min. 18 V - Battery with min. 2,5 Ah Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool FI80-T19 isoweld 3000 / FI-H / FI-Magnet Set FI-Pad Stand-up setting tool for the installation of isoweld fasteners, stress plates and sleeves Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates Cardboard pad for applications on EPS/XPS insulation 3. 43

Austenitic stainless steel self drilling fastener Flat roof fastening systems for steel deck isoweld BS-S-6,1 Order information d d T25 Ø 9,7 mm TL L L 3 KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code BS-S- 6,1x 60 Product / Application Approval Type d L Application information Stainless steel BS-S- 6,1x 60 BS-S- 6,1x 80 BS-S- 6,1x 100 KL BS-S- 6,1x 120 BS-S- 6,1x 140 BS-S- 6,1x 160 t t min. steel: 0,63 mm t max. steel: 2 x 1,0 mm ETA-08/0262 Thread length TL: Fastener length 60 mm: TL = 57 mm Fastener length 80-160 mm: TL = 75 mm Plastic NEW: FM Approval! ETA-08/0262 APPOVED FI-- FI-- FI-- FI-- FI-- FI-- FI-- FI-- 20x 20x 20x 20x 20x 20x 20x 20x 40 70 100 130 160 190 230 300 KL see combination table Stress plates FI-P-16,0-PVC FI-P-16,0-TPO FI-P-16,0-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 3. 44

Flat roof fastening systems for steel deck Combination table isoweld BS-6,1 / BS-S-6,1 / FI--20 COMBINATION CALCULATION KL 3 3. 45

Flat roof fastening systems for concrete deck Fasteners, stress plates and plastic sleeves 4ofast sten enere s and stre ss pla tes Prod oduc t co de Page Ca rbon ste el Aust enit iticic sta inless ste teelel Ca rbon ste el DT-4,8 / DT- T-6, 3 ID-70x70 / IF/IG-C -C-8-82x 40 / ID-82x40 DT-S -S-4-4,8 / DT-S-6,3 ID-70x70 / IF/ IG -C-82x 2x40 / ID D-8-82x 40 TI -6,3 ID -70x 70 / IF/ IG-C-82x 2x40 / ID -82x 2x40 4. 3 4. 7 4. 13 Dril l accece ssor orie ies SDS 4. 16 isot ak Fastenerer s and pl as tic sleeves Prod oduct co de Page 4 Carbon steele DT-4-4,8 45 4. 18 Austenit ic stainless steelel DT-S-4,8 45 4.22 Carbon steelel TI -T25 25-6,3 45 4.26 Carbon steelel TIA-T25-6,3 45 4. 31 Drill accessor ies ZVK / ZAK 4.36 isow eld Fasteners, str tress pl ates and plas ti c sleeve s Ca rbon steel, full metallic Austenitic stainless steel, full metallic Carbon steel full metallic Prod oduc t code DT -4,8 / DT- T-6, 6,3 FI-P-6,8,8-P -PVC / FI- P- 6, 8- TP O / FI-P-6,8-EPDM DT-S -S-4-4,8 / DT- S- 6,3 FI -P-6-6,8 -PVC / FI- P-6,8-TPO / FI -P-6,8-EPDM TI-T25-6,3 FI-P-6,8-PVC / FI-P-6, 6,8-TPO / FI-P-6,8-EPD M Page 4.38 4. 42 4.464 Dr ill acce cess ories SDS 4.49 Carbon steel, sleeve system Austenitici stainless steel, sleeve system Carbon steele, sleeve syste m Carbon steel, sleeve sys te m DT-4,8 FI-P-16, 6,0- PVC / FI-P -16,0-TPO / FI-P-16, 6,0-EP DM FI--20 DT -S-4,8 FI-P-16,0- PVC / FI-P-16, 6,0-0-TP TPO / FI -P-1-16, 6,0-0-EP EPDM FI --20 TI -T25-6,3 FI-P-1-6,0-PV C / FI-P -P-1-1 6, 0-TPO / FI-P-16,0-EP DM FI--20 TIA- T2 5-6,3 FI-P-16,0-PVC / FI-P-16,0-TP O / FI-P-16,0-EP DM FI--20 4.52 4.56 4.60 4.64 Drill access ssor orie ies ZVK / ZAK 4.68 4. 1

Flat roof fastening systems for concrete deck Fixing into concrete with conventional methods is at best complicated. Using plug free fasteners however considerably improves installation time. The DT system has been develo- ped and optimised by SFS intec over recent years and has a proven track record with respect to its fast installation, security of application and ease of use. The impact anchor DT is part of the, and system. 4 Tough anchoring due to all round force distribution Simple one-piece fastener No need to fit and adjust plugs educed diameter pilot holes required educed drilling depth Maximum corrosion resistance Available in austenitic stainless steel Highly fire resistant Absolutely free from vibration Simple procedure: pre-drill and drive in, secure and stable Fixing into concrete using the DT system is even more secure and efficient. The unique spiral tip of the impact anchor DT exerts all round pressure within the pilot hole. The continuous pre-tensioning due to the rotary force transmission results in a considerably improved pull-out performance. The DT fastening system is vibration free, corrosion proof and offers extremely high fire resistance. The entire range is available in austenitic stainless steel, making this fastener ideal for critical applications including those with chemically aggressive atmospheric conditions or roof renovation projects. 4. 2

Flat roof fastening systems for concrete deck Carbon steel fastener isofast DT-4,8 / DT-6.3 isofast DT-4,8 / DT-6,3 Technical information Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. Material Fastener DT-4,8 / DT-6,3 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Stress plates ID-70x70 / IF/IG-C-82x40 / ID-82x40 Steel 1,0 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements 4 Stress plates ID-70x70 IF/IG-C-82x40 ID-82x40 Stress plate for insulation, hole diameter 7,5 mm Stress plate for membrane and insulation on hard substrates, hole diameter 7,5 mm Stress plate for membrane and insulation, hole diameter 7,5 mm 4. 3

Carbon steel fastener Flat roof fastening systems for concrete deck isofast DT-4,8 / DT-6,3 Technical information Tools and accessories ecommendation for pre-drilling ZD15 4 Hammer drill with weight class 2-3 kg, impact energy 2,5 J Setting tool for the installation of DT impact anchor 4. 4

Flat roof fastening systems for concrete deck Carbon steel fastener isofast DT-4,8 / DT-6,3 Order information d Mushroom head, L 51 mm Ø 11,0 mm L 64 mm Ø 9,7 mm KL L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm Order code DT- 28 Product / Application Approval Type d L KL Drill bits Application information Carbon steel ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- 28 32 38 51 64 76 89 102 115 127 140 152 3 7 13 26 39 51 64 77 90 102 115 127 160 160 160 160 160 160 210 210 210 210 260 260 KL Sd Build-up: Thickness concrete deck t min. 60 mm. Edge distance: min. 60 mm Insulation compressive strength at 10% compression 0,1 N/mm 2. Clamping length KL: Total roof build-up between top edge substrate and top edge membrane 4 KL = thickness vapour barrier + thickness insulation + thickness membrane Setting: Sd (Setting depth): min. 25 mm Depth of pilot hole to be min.15 mm deeper than the setting depth of the DT impact anchor, depending on site conditions. Stress plates ID-70X70 IF/IG-C-82X40 ID-82X40 ID ETA-08/0262 IF/IG-C ETA-08/0262 ETA-08/0262 TEKNISK GODKJENNING APPOVED SINTEFF Certificaton TG 2137 APPOVED ID TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 4. 5

Carbon steel fastener Flat roof fastening systems for concrete deck isofast DT-4,8 / DT-6,3 Order information d Mushroom head Ø 11,0 mm KL L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 4 Order code DT- 38 Product / Application Approval Type d L KL Drill bits Application information Carbon steel ETA-08/0262 APPOVED TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- 38 51 102 140 152 165 178 191 203 216 229 241 254 267 279 292 305 330 356 381 406 432 6 19 70 108 120 133 146 159 171 184 197 209 222 235 247 260 273 298 324 349 374 400 160 160 210 260 260 260 260 285 285 360 360 360 360 360 410 410 410 510 510 510 510 510 KL Sd Build-up: Thickness concrete deck t min. 60 mm. Edge distance: min. 60 mm Insulation compressive strength at 10% compression 0,1 N/mm 2. Clamping length KL: Total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane Setting: Sd (Setting depth): min. 32 mm Depth of pilot hole to be min.15 mm deeper than the setting depth of the DT impact anchor, depending on site conditions. Stress plates ID-70X70 IF/IG-C-82X40 ID-82X40 ID ETA-08/0262 IF/IG-C ETA-08/0262 ETA-08/0262 TEKNISK GODKJENNING APPOVED SINTEFF Certificaton TG 2137 APPOVED ID TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 4. 6

Flat roof fastening systems for concrete deck Austenitic stainless steel fastener isofast DT-S-4,8 / DT-S-6,3 isofast DT-S-4,8 / DT-S-6,3 Technical information Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. For applications with internal relative humidity higher than 70%, chemically agressive atmospheres / conditions, locations with agressive local conditions (e.g. coastal environments). For refurbishment applications with unknown condition of the existing build-up or build-up with abrasive layers that may damage the corrosion protection. If extended design life / warranty is required. 4 Material Fastener DT-S-4,8 / DT-S-6,3 Austenitic stainless steel, grade AISI 316, European Standard 1.4401, grade A4 Stress plates ID-70x70 / IF/IG-C-82x40 / ID-82x40 Steel 1,0 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates ID-70x70 IF/IG-C-82x40 ID-82x40 Stress plate for insulation, hole diameter 7,5 mm Stress plate for membrane and insulation on hard substrates, hole diameter 7,5 mm Stress plate for membrane and insulation, hole diameter 7,5 mm 4. 7

Austenitic stainless steel fastener Flat roof fastening systems for concrete deck isofast DT-S-4,8 / DT-S-6,3 Technical information Tools and accessories ecommendation for pre-drilling ZD15 4 Hammer drill with weight class 2-3 kg, impact energy 2,5 J Setting tool for the installation of DT impact anchor 4. 8

Flat roof fastening systems for concrete deck Austenitic stainless steel fastener isofast DT-S-4,8 / DT-S-6,3 Order information d Mushroom head, L 51 mm Ø 11,0 mm L 64 mm Ø 9,7 mm KL L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm Order code DT-S- 28 Product / Application Approval Type d L KL Drill bits Application information Stainless steel DT-S- DT-S- DT-S- DT-S- DT-S- DT-S- DT-S- DT-S- 28 32 38 51 64 89 115 140 3 7 13 26 39 64 90 115 160 160 160 160 160 210 210 260 KL Sd Build-up: Thickness concrete deck t min. 60 mm. Edge distance: min. 60 mm Insulation compressive strength at 10% compression 0,1 N/mm 2. 4 ETA-08/0262 Clamping length KL: Total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane Setting: Sd (Setting depth): min. 25 mm Depth of pilot hole to be min.15 mm deeper than the setting depth of the DT impact anchor, depending on site conditions. Availability: Availability on request. Please consult your SFS representative for further information. Stress plates ID-70X70 IF/IG-C-82X40 ID-82X40 ID ETA-08/0262 IF/IG-C ETA-08/0262 ETA-08/0262 TEKNISK GODKJENNING APPOVED SINTEFF Certificaton TG 2137 APPOVED ID TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 4. 9

Austenitic stainless steel fastener Flat roof fastening systems for concrete deck isofast DT-S-4,8 / DT-S-6,3 Order information d Mushroom head Ø 11,0 mm KL L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 4 Order code DT-S- 152 Product / Application Approval Type d L KL Drill bits Application information Stainless steel DT-S- DT-S- DT-S- DT-S- DT-S- DT-S- DT-S- 152 178 203 229 254 279 292 120 146 171 197 222 247 260 260 260 285 360 360 410 410 KL Sd Build-up: Thickness concrete deck t min. 60 mm. Edge distance: min. 60 mm Insulation compressive strength at 10% compression 0,1 N/mm 2. ETA-08/0262 Clamping length KL: Total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane Setting: Sd (Setting depth): min. 32 mm Depth of pilot hole to be min.15 mm deeper than the setting depth of the DT impact anchor, depending on site conditions. Availability: Availability on request. Please consult your SFS representative for further information. Stress plates ID-70X70 IF/IG-C-82X40 ID-82X40 ID ETA-08/0262 IF/IG-C ETA-08/0262 ETA-08/0262 TEKNISK GODKJENNING APPOVED SINTEFF Certificaton TG 2137 APPOVED ID TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 4. 10

Flat roof fastening systems for concrete deck 4 4. 11

Flat roof fastening systems for concrete deck Application specific fastener solutions for use either with solid or pre-cast concrete substrates are highly sought after. Indeed, some systems still rely on plugs to hold the concrete fasteners securely in position. Using SFS s specially developed, application specific thread-form fastener greatly simplifies the installation of flat roof insulation boards and membranes on concrete deck. The TI is part of the, and system. 4 Easy to install No requirement for plugs Low insertion torque High pull-out resistance Can be easily removed Maximum corrosion resistance educed drilling due to low embedment requirement Simply drill the pilot hole, apply with an appropriate screwdriver The TI thread forming fastener represents the ideal solution for many applications where secure fastening is required into concrete substrates. These include the installation of waterproof membrane and insulation materials onto solid or precast concrete decks using the appropriate SFS intec sleeves or stress plates. Other applications include fixing timber beams and weatherboarding into concrete / masonry walling or decking. 4. 12

Flat roof fastening systems for concrete deck Carbon steel fastener isofast TI-6,3 isofast TI-6,3 Technical information Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. Material Fastener TI-6,3 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Stress plates ID-70x70 / IF/IG-C-82x40 / ID-82x40 Steel 1,0 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements 4 Stress plates ID-70x70 IF/IG-C-82x40 ID-82x40 Stress plate for insulation, hole diameter 7,5 mm Stress plate for membrane and insulation on hard substrates, hole diameter 7,5 mm Stress plate for membrane and insulation, hole diameter 7,5 mm 4. 13

Carbon steel fastener Flat roof fastening systems for concrete deck isofast TI-6,3 Technical information Tools and accessories ecommendation for pre-drilling ecommendation for installation ZA1/4 4 Hammer drill with weight class 2-3 kg, impact energy 2,5 J Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah Do not use a percussion tool. E380 Accessory for the manual installation in combination with a power screwdriver or battery tool 4. 14

Flat roof fastening systems for concrete deck Carbon steel fastener isofast TI-6,3 Order information d Hexagon 8 mm KL L TL KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm Order code TI- 25 Product / Application Approval Type d L KL Drill bits Application information Carbon steel ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 TI- TI- TI- TI- TI- TI- TI- TI- TI- TI- TI- TI- TI- TI- TI- TI- TI- TI- TI- TI- TI- TI- TI- 25 32 45 55 65 75 85 95 105 115 125 135 145 155 165 175 185 195 205 215 235 255 275 5 12 25 35 45 55 65 75 85 95 105 115 125 135 145 155 165 175 185 195 215 235 255 5,0x110 160 160 160 160 160 210 210 210 210 210 210 260 260 260 260 310 310 310 310 360 360 360 KL Sd Build-up: Thickness concrete deck t min. 40 mm. Edge distance: min. 50 mm Insulation compressive strength at 10% compression 0,1 N/mm². Clamping length KL: Total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane Thread length TL: Fastener length 25-45 mm: TL = - 3 mm Fastener length 55-275 mm: TL = 50 mm Setting: Sd (Setting depth): min. 20 mm Depth of pilot hole to be min. 15 mm deeper than the setting depth of the fastener, depending on site conditions. 4 Stress plates ID-70X70 IF/IG-C-82X40 ID-82X40 ID ETA-08/0262 IF/IG-C ETA-08/0262 ETA-08/0262 TEKNISK GODKJENNING APPOVED SINTEFF Certificaton TG 2137 APPOVED ID TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 4. 15

Accessories Flat roof fastening systems for concrete deck SDS Order information L F SP Carbide-geometry Dynamic, chisel-shaped drill bit head Multi-fluted, spacious KVS-spiral Unique KVS-flute design d diameter L Length F working length All measures in mm 4 Order code SDS- 110/ 50- SP Type d L F Code Application information 5,0x 5,0x 5,0x 5,0x 5,0x 5,0x 5,0x 5,0x 5,0x 5,2x 5,2x 5,2x 5,2x 5,2x 110/ 160/ 210/ 260/ 310/ 360/ 110/ 160/ 210/ 260/ 310/ 360/ 400/ 450/ 500/ 160/ 210/ 260/ 310/ 360/ SDS- SDS- SDS- SDS- SDS- SDS- 50-100- 150-200- 250-300- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- 50-100- 150-200- 250-300- 340-390- 440- SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP Impact anchor DT-L Impact anchor DT-S-L TI-L* TI-T25-L* TIA-T25-L* TI-L TI-T25-L TIA-T25-L TI-L* TI-T25-L* TIA-T25-L* 110/ 160/ 210/ 260/ 285/ 360/ 410/ 510/ 100-150- 200-250- 300- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- 50-100- 150-200- 225-300- 350-450- SP SP SP SP SP SP SP SP N-L Impact anchor DT-L Impact anchor DT-S-L All approvals and recommended design values are based upon close tolerance pilot holes that are drilled using SFS intec SP carbide drill bits. * Technical performance values of the TI fasteners may differ between countries due to variation in the hardness of locally sourced concrete aggregates. Optimum performance can be determined by site testing using different drill diameters, for example between SDS-4,8 and SDS-5,2. Consult your SFS representative for further information. 4. 16

Flat roof fastening systems for concrete deck Accessories SDS Order information L F 4C One piece tip element with optimal 4x90 carbide cutting symmetry for long lifetime when hitting reinforcing steel. Four flute ridges with increased flute pitch provide fast transporting of drilling debris. d diameter L Length F working length All measures in mm Order code SDS- 210/ 150-4C Type d L F Code Application information 210/ 310/ 4C 4C Impact anchor DT-L Impact anchor DT-S-L TI-L* TI-T25-L* TIA-T25-L* 4 5,0x 210/ 5,0x 310/ 210/ 310/ SDS- SDS- 150-250- SDS- SDS- 150-250- SDS- SDS- 150-250- 4C 4C 4C 4C 4 cutter drill bit 4C for reinforced concrete 4 cutter drill bit 4C for reinforced concrete TI-L TI-T25-L TIA-T25-L 4 cutter drill bit 4C for reinforced concrete 4 cutter drill bit 4C for reinforced concrete N-L Impact anchor DT-L Impact anchor DT-S-L 4 cutter drill bit 4C for reinforced concrete 4 cutter drill bit 4C for reinforced concrete All approvals and recommended design values are based upon close tolerance pilot holes that are drilled using SFS intec 4C carbide drill bits. * Technical performance values of the TI fasteners may differ between countries due to variation in the hardness of locally sourced concrete aggregates. Optimum performance can be determined by site testing using different drill diameters, for example between SDS-4,8 and SDS-5,0. Consult your SFS representative for further information. 4. 17

Carbon steel fastener Flat roof fastening systems for concrete deck isotak DT-4,8 isotak DT-4,8 Technical information Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. 4 Material Fastener DT-4,8 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Sleeves 45 High quality polypropylene, PP Sleeves 45 Sleeve for membrane and insulation, head diameter 45 mm 4. 18

Flat roof fastening systems for concrete deck Carbon steel fastener isotak DT-4,8 Technical information Tools and accessories ecommendation for pre-drilling ecommendation for installation DT-M-500 / DT-M-750 Hammer drill with weight class 2-3 kg, impact energy 2,5 J Hammer drill with weight class 2-3 kg, impact energy 2,5 J, without rotation function, to hammer in the DT impact anchor Mechanical driving tool to hammer in the DT impact anchor 4 4. 19

Carbon steel fastener Flat roof fastening systems for concrete deck isotak DT-4,8 Order information d d Mushroom head Ø 9,7 mm L L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 4 Order code DT- 64 Product / Application Approval Type d L Application information Carbon steel ETA-08/0262 TEKNISK GODKJENNING DT- DT- DT- DT- DT- DT- DT- DT- 64 76 89 102 115 127 140 152 KL Sd Build-up: Thickness concrete deck t min. 60 mm. Edge distance: min. 60 mm SINTEFF Certificaton TG 2137 Setting: Sd (Setting depth): min. 25 mm Depth of pilot hole to be min.15 mm deeper than the setting depth of the DT impact anchor, depending on site conditions. Plastic ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 15 35 65 85 105 135 165 185 225 255 285 325 365 405 485 565 645 705 KL see combination table 4. 20

Flat roof fastening systems for concrete deck 4 4. 21

Austenitic stainless steel fastener Flat roof fastening systems for concrete deck isotak DT-S-4,8 isotak DT-S-4,8 Technical information 4 Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. For applications with internal relative humidity higher than 70%, chemically agressive atmospheres / conditions, locations with agressive local conditions (e.g. coastal environments). For refurbishment applications with unknown condition of the existing build-up or build-up with abrasive layers that may damage the corrosion protection. If extended design life / warranty is required. Material Fastener DT-S-4,8 Austenitic stainless steel, grade AISI 316, European Standard 1.4401, grade A4 Sleeves 45 High quality polypropylene, PP Sleeves 45 Sleeve for membrane and insulation, head diameter 45 mm 4. 22

Flat roof fastening systems for concrete deck Austenitic stainless steel fastener isotak DT-S-4,8 Technical information Tools and accessories ecommendation for pre-drilling ecommendation for installation DT-M-500 / DT-M-750 Hammer drill with weight class 2-3 kg, impact energy 2,5 J Hammer drill with weight class 2-3 kg, impact energy 2,5 J, without rotation function, to hammer in the DT impact anchor Mechanical driving tool to hammer in the DT impact anchor 4 4. 23

Austenitic stainless steel fastener Flat roof fastening systems for concrete deck isotak DT-S-4,8 Order information d d Mushroom head Ø 9,7 mm L L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 4 Order code DT-S- 64 Product / Application Approval Type d L Application information Stainless steel DT-S- DT-S- DT-S- DT-S- 64 89 115 140 KL Sd ETA-08/0262 Build-up: Thickness concrete deck t min. 60 mm. Edge distance: min. 60 mm Setting: Sd (Setting depth): min. 25 mm Depth of pilot hole to be min.15 mm deeper than the setting depth of the DT impact anchor, depending on site conditions. Availability: Availability on request. Please consult your SFS representative for further information. Plastic ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 15 35 65 85 105 135 165 185 225 255 285 325 365 405 485 565 645 705 KL see combination table 4. 24

Flat roof fastening systems for concrete deck Combination table isotak DT-4,8 / DT-S-4,8 / 45 COMBINATION CALCULATION KL 4 4. 25

Carbon steel fastener Flat roof fastening systems for concrete deck isotak TI-T25-6,3 isotak TI-T25-6,3 Technical information Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. 4 Material Fastener TI-T25-6,3 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Sleeves 45 High quality polypropylene, PP Sleeves 45 Sleeve for membrane and insulation, head diameter 45 mm 4. 26

Flat roof fastening systems for concrete deck Carbon steel fastener isotak TI-T25-6,3 Technical information Tools and accessories ecommendation for pre-drilling ecommendation for installation ZA1/4 -M6-300/750 Hammer drill with weight class 2-3 kg, impact energy 2,5 J Power screwdriver - 300-700 rpm - Min. 500 W Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah Do not use a percussion tool. Accessory for the manual installation in combination with a power screwdriver or battery tool 4 T25-32-M6 ZH-11-ING Accessory for the manual installation in combination with a power screwdriver or battery tool Accessories for the manual installation of isotak fasteners and sleeves 4. 27

Carbon steel fastener Flat roof fastening systems for concrete deck isotak TI-T25-6,3 Order information TL L d d L T25 Ø 9,7 mm KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 4 Order code TI-T25-30 Product / Application Approval Type d L Application information Carbon steel ETA-08/0262 APPOVED TI-T25- TI-T25- TI-T25- TI-T25- TI-T25- TI-T25- TI-T25- TI-T25- TI-T25- TI-T25-30 50 60 70 80 90 100 120 140 160 KL Sd Build-up: Thickness concrete deck t min. 40 mm. Edge distance: min. 50 mm TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 Thread length TL: Fastener length 50 mm: TL = 47 mm (isotak) Plastic ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 15 35 65 85 105 135 165 185 225 255 285 325 365 405 485 565 645 705 Fastener length 60-160 mm: TL = 50 mm Setting: Sd (Setting depth): min. 20 mm Depth of pilot hole to be min. 15 mm deeper than the setting depth of the fastener, depending on site conditions. KL see combination table 4. 28

Flat roof fastening systems for concrete deck Combination table isotak TI-T25-6,3 / 45 COMBINATION CALCULATION 4 06/2016 4. 29

Flat roof fastening systems for concrete deck TIA-T25: The adjustable fixing system for tapered insulation Flat roofs, in conjunction with existing building codes, should have a design fall to meet drainage requirements. Where the substructure is horizontal, a tapered insulation system is required. Mechanical fastening systems required to install membrane and insulation over tapered insulation schemes can be particularly challenging in the case of concrete deck applications. ationalised systems that allow the same fastener / sleeve combination to be used throughout are particularly efficient and result in high levels of site productivity. The TIA-T25 is part of the isotak and isoweld system. 4 The convincing advantages of the TIA-T25 fastening systems The ideal fastening solution for tapered insulation schemes on concrete decks The TIA fasteners in combination with the sleeves 45, 75 or FI- can be used for insulation and membrane installation for roof build-ups of between 75 mm and 815 mm. The same fastener and sleeve combination can typically be used for insulation boards differing by up to 100 mm in thickness. This offers optimum material usage and eliminates the possibility of insufficient fastener length. After the fastener is installed, the sleeve height can be finally adjusted if required to match the insulation height using a special tool. The fasteners can be quickly and easily removed, should this be necessary. Due to the low insertion depth requirement, the TIA fasteners require less drilling than conventional concrete fasteners, reducing installation time for the contractor. The low insertion depth additionally makes the TIA fasteners particularly suited for the use on thin walled concrete sections. A treadfast fastener and sleeve combination ensures that the system is safe to walk on No plugs are required for fixing into concrete Optimum installation system for tapered insulation schemes High pull-out resistance educed drilling requirement due to low insertion depth Equally suitable for new buildings and renovation work Adjustable, removable fastener solution Ideal for thin concrete sections Fewer combinations of fasteners are required 4. 30

Flat roof fastening systems for concrete deck Carbon steel fastener isotak TIA-T25-6,3 isotak TIA-T25-6,3 Technical information Application For the fastening of waterproof membrane and tapered insulation to concrete and to thin concrete roof liner trays. Material Fastener TIA-T25-6,3 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Sleeves 45 High quality polypropylene, PP 4 Sleeves 45 Sleeve for membrane and insulation, head diameter 45 mm 4. 31

Carbon steel fastener Flat roof fastening systems for concrete deck isotak TIA-T25-6,3 Technical information Tools and accessories ecommendation for pre-drilling ecommendation for installation ZA1/4 -M6-300/750 4 Hammer drill with weight class 2-3 kg, impact energy 2,5 J Power screwdriver - 300-700 rpm - Min. 500 W Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah Do not use a percussion tool. Accessory for the manual installation in combination with a power screwdriver or battery tool T25-32-M6 ZH-11-ING AJ-M6 Accessory for the manual installation in combination with a power screwdriver or battery tool Accessories for the manual installation of isotak fasteners and sleeves Adjusting bit for the isotak sleeve adjustment 4. 32

Flat roof fastening systems for concrete deck Carbon steel fastener isotak TIA-T25-6,3 Order information d d T25 Ø 9,7 mm L L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm Order code TIA-T25-70 Product / Application Approval Type d L Application information Carbon steel TIA-T25- TIA-T25- TIA-T25- TIA-T25-70 90 120 150 KL KL 4 ETA-08/0262 Sd Sd TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 Build-up: Thickness concrete deck t min. 40 mm. Edge distance: min. 50 mm Setting: Sd (Setting depth): min. 20 mm Depth of pilot hole to be min. 15 mm deeper than the setting depth of the fastener, depending on site conditions. Plastic ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 15 35 65 85 105 135 165 185 225 255 285 325 365 405 485 565 645 705 KL see combination table 4. 33

Carbon steel fastener Flat roof fastening systems for concrete deck isotak TIA-T25-6,3 Installation process efurbishment 4 New construction 1 2 3 4 5 Combination table 1 Pilot drill a 16-18 mm diameter hole through the existing roof build-up using a carbide drill bit. 2 Drill a hole in the concrete structure. 3 Insert sleeve in the pre-drilled hole and insert fastener in sleeve. 4 Screw fastener through sleeve into concrete with applied pressure. 5 Tighten sleeve if necessary (clockwise if the sleeve head is not completely flush). A B C D No Sleeve TIA-T25-6,3 x 70 TIA-T25-6,3 x 90 TIA-T25-6,3 x 120 TIA-T25-6,3 x 150 L KL min KL max KL min KL max KL min KL max KL min KL max KL Sd KL Sd 1 65 75 95 85 115 115 145 145 175 2 85 95 115 95 135 115 165 145 195 3 105 115 135 115 155 115 185 145 215 4 135 145 165 145 185 145 215 145 245 5 165 175 195 175 215 175 245 175 275 6 185 195 215 195 235 195 265 195 295 7 225 235 255 235 275 235 305 235 335 8 255 265 285 265 305 265 335 265 365 9 285 295 315 295 335 295 365 295 395 10 325 335 355 335 375 335 405 335 435 11 365 375 395 375 415 375 445 375 475 12 405 415 435 415 455 415 485 415 515 13 485 495 515 495 535 495 565 495 595 14 565 575 595 575 615 575 645 575 675 15 645 655 675 655 695 655 725 655 755 16 705 715 735 715 755 715 785 715 815 Example Demand KL: 120-240 mm Combination 3B = sleeve 105 + screw 90, KL covering 115-155 mm 4D = sleeve 135 + screw 150, KL covering145-245 mm 4. 34

Flat roof fastening systems for concrete deck Accessories isotak TIA-T25-6,3 Tools and accessories Product Drill extension (500 mm, 750 mm and 1000 mm) Order code ZAK-500 ZAK-750 ZAK-1000 Application Drill bit with stopper Drive bar (300 mm and 750 mm) ZVK-5,0x25x90STOP ZVK-5,0x35x100STOP ZVK-5,0x110STOP ZVK-5,0x120STOP ZA¼ -M6-300 ZA¼ -M6-750 4 Drive bar extension (100 mm) ZA¼ -M6-EXT100 Insert bit T25-32-M6 T25-32-M6-ING ZH-11-ING T25-32-M6 T25-32-M6-ING Adjusting tool AJ60x130-TIA Adjusting bit AJ-M6 4. 35

Accessories Flat roof fastening systems for concrete deck ZVK / ZAK Order information ZVK-STOP ZVK L F L F d diameter L Length F working length All measures in mm 4 Order code ZVK- 100x160 Type d F L Code Application information 100x 160 100x 165 STOP 5,0x 55x 115 5,0x 100x 160 5,0x 25x 90 5,0x 35x 100 5,0x 110 5,0x 55x 120 STOP STOP STOP STOP Impact anchor DT-L Impact anchor DT-S-L TI-T25-L* TIA-T25-L* TI-T25-L TIA-T25-L ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- 5,2x 25x 90 5,2x 35x 100 5,2x 110 5,2x 100x 165 STOP STOP STOP STOP TI-T25-L* TIA-T25-L* ZVK-STOP: The special STOP drills additionally core out the insulation providing for easy sleeve insertion and accurate fastener alignment with the pilot hole. ZVK: Conus drills for different use, mostly to replace very long SDS drills ZAK-500 / ZAK-750 / ZAK-1000 - Drill extension for the ZVK conus drills All approvals and recommended design values are based upon close tolerance pilot holes that are drilled with ZVK carbide drill bits. * Technical performance values of the TI fasteners may differ between countries due to variation in the hardness of locally sourced concrete aggregates. Optimum performance can be determined by site testing using different drill diameters, for example between ZVK-4,8 and ZVK-5,2. Consult your SFS representative for further information. 4. 36

Flat roof fastening systems for concrete deck 4 4. 37

Carbon steel fastener Flat roof fastening systems for concrete deck isoweld DT-4,8 / DT-6,3 isoweld DT-4,8 / DT-6,3 Technical information Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. 4 Material Fastener DT-4,8 / DT-6,3 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Stress plates FI-P-6,8-PVC / FI-P-6,8-TPO FI-P-6,8-EPDM Steel 0,8 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm 4. 38

Flat roof fastening systems for concrete deck Carbon steel fastener isoweld DT-4,8 / DT-6,3 Technical information Tools and accessories ecommendation for pre-drilling ZD15 isoweld 3000 / FI-H / FI-Magnet Set 4 Hammer drill with weight class 2-3 kg, impact energy 2,5 J Setting tool for the installation of DT impact anchor Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates FI-Pad Cardboard pad for applications on EPS/XPS insulation 4. 39

Carbon steel fastener Flat roof fastening systems for concrete deck isoweld DT-4,8 / DT-6,3 Order information d Mushroom head, L 51 mm Ø 11,0 mm L 64 mm Ø 9,7 mm KL L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 4 Order code DT- 28 Product / Application Approval Type d L KL Drill bits Application information Carbon steel ETA-08/0262 DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- 28 32 38 51 64 76 89 102 115 127 140 152 3 7 13 26 39 51 64 77 90 102 115 127 160 160 160 160 160 160 210 210 210 210 260 260 KL Sd Build-up: Thickness concrete deck t min. 60 mm. Edge distance: min. 60 mm Insulation compressive strength at 10% compression 0,1 N/mm 2. TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 Clamping length KL: Total roof build-up between top edge substrate and top edge insulation KL = thickness vapour barrier + thickness insulation Setting: Sd (Setting depth): min. 25 mm Depth of pilot hole to be min.15 mm deeper than the setting depth of the DT impact anchor, depending on site conditions. Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 4. 40

Flat roof fastening systems for concrete deck Carbon steel fastener isoweld DT-4,8 / DT-6,3 Order information d Mushroom head Ø 11,0 mm KL L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm Order code DT- 38 Product / Application Approval Type d L KL Drill bits Application information Carbon steel ETA-08/0262 APPOVED TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- DT- 38 51 102 140 152 165 178 191 203 216 229 241 254 267 279 292 305 330 356 381 406 432 6 19 70 108 120 133 146 159 171 184 197 209 222 235 247 260 273 298 324 349 374 400 160 160 210 260 260 260 260 285 285 360 360 360 360 360 410 410 410 510 510 510 510 510 KL Sd Build-up: Thickness concrete deck t min. 60 mm. Edge distance: min. 60 mm Insulation compressive strength at 10% compression 0,1 N/mm 2. Clamping length KL: Total roof build-up between top edge substrate and top edge insulation KL = thickness vapour barrier + thickness insulation Setting: Sd (Setting depth): min. 32 mm Depth of pilot hole to be min.15 mm deeper than the setting depth of the DT impact anchor, depending on site conditions. 4 Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 4. 41

Austenitic stainless steel fastener Flat roof fastening systems for concrete deck isoweld DT-S-4,8 / DT-S-6,3 isoweld DT-S-4,8 / DT-S-6,3 Technical information 4 Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. For applications with internal relative humidity higher than 70%, chemically agressive atmospheres / conditions, locations with agressive local conditions (e.g. coastal environments). For refurbishment applications with unknown condition of the existing build-up or build-up with abrasive layers that may damage the corrosion protection. If extended design life / warranty is required. Material Fastener DT-S-4,8 / DT-S-6,3 Austenitic stainless steel, grade AISI 316, European Standard 1.4401, grade A4 Stress plates FI-P-6,8-PVC / FI-P-6,8-TPO FI-P-6,8-EPDM Steel 0,8 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm 4. 42

Flat roof fastening systems for concrete deck Austenitic stainless steel fastener isoweld DT-S-4,8 / DT-S-6,3 Technical information Tools and accessories ecommendation for pre-drilling ZD15 isoweld 3000 / FI-H / FI-Magnet Set 4 Hammer drill with weight class 2-3 kg, impact energy 2,5 J Setting tool for the installation of DT impact anchor Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates FI-Pad Cardboard pad for applications on EPS/XPS insulation 4. 43

Austenitic stainless steel fastener Flat roof fastening systems for concrete deck isoweld DT-S-4,8 / DT-S-6,3 Order information d Mushroom head, L 51 mm Ø 11,0 mm L 64 mm Ø 9,7 mm KL L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 4 Order code DT-S- 28 Product / Application Approval Type d L KL Drill bits Application information Stainless steel DT-S- DT-S- DT-S- DT-S- DT-S- DT-S- DT-S- DT-S- 28 32 38 51 64 89 115 140 3 7 13 26 39 64 90 115 160 160 160 160 160 210 210 260 KL Sd Build-up: Thickness concrete deck t min. 60 mm. Edge distance: min. 60 mm Insulation compressive strength at 10% compression 0,1 N/mm 2. ETA-08/0262 Clamping length KL: Total roof build-up between top edge substrate and top edge insulation KL = thickness vapour barrier + thickness insulation Setting: Sd (Setting depth): min. 25 mm Depth of pilot hole to be min.15 mm deeper than the setting depth of the DT impact anchor, depending on site conditions. Availability: Availability on request. Please consult your SFS representative for further information. Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 4. 44

Flat roof fastening systems for concrete deck Austenitic stainless steel fastener isoweld DT-S-4,8 / DT-S-6,3 Order information d Mushroom head Ø 11,0 mm KL L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm Order code DT-S- 152 Product / Application Approval Type d L KL Drill bits Application information Stainless steel DT-S- DT-S- DT-S- DT-S- DT-S- DT-S- DT-S- 152 178 203 229 254 279 292 120 146 171 197 222 247 260 260 260 285 360 360 410 410 KL Sd 4 Build-up: Thickness concrete deck t min. 60 mm. Edge distance: min. 60 mm Insulation compressive strength at 10% compression 0,1 N/mm 2. ETA-08/0262 Clamping length KL: Total roof build-up between top edge substrate and top edge insulation KL = thickness vapour barrier + thickness insulation Setting: Sd (Setting depth): min. 32 mm Depth of pilot hole to be min.15 mm deeper than the setting depth of the DT impact anchor, depending on site conditions. Availability: Availability on request. Please consult your SFS representative for further information. Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 4. 45

Carbon steel fastener Flat roof fastening systems for concrete deck isoweld TI-T25-6,3 isoweld TI-T25-6,3 Technical information Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. 4 Material Fastener TI-T25-6,3 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Stress plates FI-P-6,8-PVC / FI-P-6,8-TPO FI-P-6,8-EPDM Steel 0,8 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm 4. 46

Flat roof fastening systems for concrete deck Carbon steel fastener isoweld TI-T25-6,3 Technical information Tools and accessories ecommendation for pre-drilling ecommendation for installation Bit holder ZA1/4 Hammer drill with weight class 2-3 kg, impact energy 2,5 J Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool 4 Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah Do not use a percussion tool. T25-25-HEX1/4 isoweld 3000 / FI-H / FI-Magnet Set FI-Pad Accessory for the manual installation in combination with a power screwdriver or battery tool Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates Cardboard pad for applications on EPS/XPS insulation 4. 47

Carbon steel fastener Flat roof fastening systems for concrete deck isoweld TI-T25-6,3 Order information d T25 Ø 9,7 mm KL L TL KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 4 Order code TI-T25-30 Product / Application Approval Type d L KL Application information Carbon steel ETA-08/0262 TI-T25- TI-T25- TI-T25- TI-T25- TI-T25- TI-T25- TI-T25- TI-T25- TI-T25- TI-T25-30 50 60 70 80 90 100 120 140 160 10 30 40 50 60 70 80 100 120 140 KL Sd Build-up: Thickness concrete deck t min. 40 mm. Edge distance: min. 50 mm Insulation compressive strength at 10% compression 0,1 N/mm². NEW: FM Approval! APPOVED Clamping length KL: Total roof build-up between top edge substrate and top edge insulation TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 KL = thickness vapour barrier + thickness insulation Thread length TL: Fastener length 32-50 mm: TL = L - 3 mm Fastener length 60-160 mm: TL = 50 mm Setting: Sd (Setting depth): min. 20 mm Depth of pilot hole to be min. 15 mm deeper than the setting depth of the fastener, depending on site conditions. Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 4. 48

Flat roof fastening systems for concrete deck Accessories SDS Order information L F SP Carbide-geometry Dynamic, chisel-shaped drill bit head Multi-fluted, spacious KVS-spiral Unique KVS-flute design d diameter L Length F working length All measures in mm Order code SDS- 110/ 50- SP Type d L F Code Application information 5,0x 5,0x 5,0x 5,0x 5,0x 5,0x 5,0x 5,0x 5,0x 5,2x 5,2x 5,2x 5,2x 5,2x 110/ 160/ 210/ 260/ 310/ 360/ 110/ 160/ 210/ 260/ 310/ 360/ 400/ 450/ 500/ 160/ 210/ 260/ 310/ 360/ SDS- SDS- SDS- SDS- SDS- SDS- 50-100- 150-200- 250-300- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- 50-100- 150-200- 250-300- 340-390- 440- SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP Impact anchor DT-L Impact anchor DT-S-L TI-L* TI-T25-L* TIA-T25-L* TI-L TI-T25-L TIA-T25-L TI-L* TI-T25-L* TIA-T25-L* 4 110/ 160/ 210/ 260/ 285/ 360/ 410/ 510/ 100-150- 200-250- 300- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- 50-100- 150-200- 225-300- 350-450- SP SP SP SP SP SP SP SP N-L Impact anchor DT-L Impact anchor DT-S-L All approvals and recommended design values are based upon close tolerance pilot holes that are drilled using SFS intec SP carbide drill bits. * Technical performance values of the TI fasteners may differ between countries due to variation in the hardness of locally sourced concrete aggregates. Optimum performance can be determined by site testing using different drill diameters, for example between SDS-4,8 and SDS-5,2. Consult your SFS representative for further information. 4. 49

Accessories Flat roof fastening systems for concrete deck SDS Order information L F 4C One piece tip element with optimal 4x90 carbide cutting symmetry for long lifetime when hitting reinforcing steel. Four flute ridges with increased flute pitch provide fast transporting of drilling debris. d diameter L Length F working length All measures in mm 4 Order code SDS- 210/ 150-4C Type d L F Code Application information 210/ 310/ 4C 4C Impact anchor DT-L Impact anchor DT-S-L TI-L* TI-T25-L* TIA-T25-L* 5,0x 210/ 5,0x 310/ 210/ 310/ SDS- SDS- 150-250- SDS- SDS- 150-250- SDS- SDS- 150-250- 4C 4C 4C 4C 4 cutter drill bit 4C for reinforced concrete 4 cutter drill bit 4C for reinforced concrete TI-L TI-T25-L TIA-T25-L 4 cutter drill bit 4C for reinforced concrete 4 cutter drill bit 4C for reinforced concrete N-L Impact anchor DT-L Impact anchor DT-S-L 4 cutter drill bit 4C for reinforced 4 cutter drill bit 4C for reinforced All approvals and recommended design values are based upon close tolerance pilot holes that are drilled using SFS intec 4C carbide drill bits. * Technical performance values of the TI fasteners may differ between countries due to variation in the hardness of locally sourced concrete aggregates. Optimum performance can be determined by site testing using different drill diameters, for example between SDS-4,8 and SDS-5,0. Consult your SFS representative for further information. 4. 50

Flat roof fastening systems for concrete deck 4 4. 51

Carbon steel fastener Flat roof fastening systems for concrete deck isoweld DT-4,8 isoweld DT-4,8 Technical information Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. 4 Material Fastener DT-4,8 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Sleeves FI--20 Polyamide PA Stress plate FI-P-16,0-PVC / FI-P-16,0-TPO FI-P-16,0-EPDM Steel 0,8 mm esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates FI-P-16,0-PVC FI-P-16,0-TPO FI-P-16,0-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Sleeves FI--20 Sleeve for the isoweld system, head diameter 20 mm. 4. 52

Flat roof fastening systems for concrete deck Carbon steel fastener isoweld DT-4,8 Technical information Tools and accessories ecommendation for pre-drilling ecommendation for installation DT-M-500 / DT-M-750 4 Hammer drill with weight class 2-3 kg, impact energy 2,5 J Hammer drill with weight class 2-3 kg, impact energy 2,5 J, without rotation function, to hammer in the DT impact anchor Mechanical driving tool to hammer in the DT impact anchor isoweld 3000 / FI-H / FI-Magnet Set FI-Pad Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates Cardboard pad for applications on EPS/XPS insulation 4. 53

Carbon steel fastener Flat roof fastening systems for concrete deck isoweld DT-4,8 Order information d d Mushroom head, L 51 mm Ø 11,0 mm L 64 mm Ø 9,7 mm L L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 4 Order code DT- 64 Product / Application Approval Type d L Drill bits Application information Carbon steel ETA-08/0262 TEKNISK GODKJENNING DT- DT- DT- DT- DT- DT- DT- DT- 64 76 89 102 115 127 140 152 160 160 210 210 210 210 260 260 KL Sd Build-up: Thickness concrete deck t min. 60 mm. Edge distance: min. 60 mm SINTEFF Certificaton TG 2137 Setting: Sd (Setting depth): min. 25 mm Depth of pilot hole to be min.15 mm deeper than the setting depth of the DT impact anchor, depending on site conditions. Plastic NEW: FM Approval! ETA-08/0262 APPOVED FI-- FI-- FI-- FI-- FI-- FI-- FI-- FI-- 20x 20x 20x 20x 20x 20x 20x 20x 40 70 100 130 160 190 230 300 KL see combination table Stress plates FI-P-16,0-PVC FI-P-16,0-TPO FI-P-16,0-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 4. 54

Flat roof fastening systems for concrete deck 4 4. 55

Austenitic stainless steel fastener Flat roof fastening systems for concrete deck isoweld DT-S-4,8 isoweld DT-S-4,8 Technical information 4 Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. For applications with internal relative humidity higher than 70%, chemically agressive atmospheres / conditions, locations with agressive local conditions (e.g. coastal environments). For refurbishment applications with unknown condition of the existing build-up or build-up with abrasive layers that may damage the corrosion protection. If extended design life / warranty is required. Material Fastener DT-S-4,8 Austenitic stainless steel, grade AISI 316, European Standard 1.4401, grade A4 Sleeves FI--20 Polyamide PA Stress plate FI-P-16,0-PVC / FI-P-16,0-TPO FI-P-16,0-EPDM Steel 0,8 mm esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates FI-P-16,0-PVC FI-P-16,0-TPO FI-P-16,0-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Sleeves FI--20 Sleeve for the isoweld system, head diameter 20 mm. 4. 56

Flat roof fastening systems for concrete deck Austenitic stainless steel fastener isoweld DT-S-4,8 Technical information Tools and accessories ecommendation for pre-drilling ecommendation for installation DT-M-500 / DT-M-750 4 Hammer drill with weight class 2-3 kg, impact energy 2,5 J Hammer drill with weight class 2-3 kg, impact energy 2,5 J, without rotation function, to hammer in the DT impact anchor Mechanical driving tool to hammer in the DT impact anchor isoweld 3000 / FI-H / FI-Magnet Set FI-Pad Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates Cardboard pad for applications on EPS/XPS insulation 4. 57

Austenitic stainless steel fastener Flat roof fastening systems for concrete deck isoweld DT-S-4,8 Order information d d Mushroom head, L 51 mm Ø 11,0 mm L 64 mm Ø 9,7 mm L L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 4 Order code DT-S- 64 Product / Application Approval Type d L Drill bits Application information Stainless steel DT-S- DT-S- DT-S- DT-S- 64 89 115 140 160 210 210 260 KL Sd ETA-08/0262 Build-up: Thickness concrete deck t min. 60 mm. Edge distance: min. 60 mm Setting: Sd (Setting depth): min. 25 mm Depth of pilot hole to be min.15 mm deeper than the setting depth of the DT impact anchor, depending on site conditions. Availability: Availability on request. Please consult your SFS representative for further information. Plastic NEW: FM Approval! ETA-08/0262 APPOVED FI-- FI-- FI-- FI-- FI-- FI-- FI-- FI-- 20x 20x 20x 20x 20x 20x 20x 20x 40 70 100 130 160 190 230 300 KL see combination table Stress plates FI-P-16,0-PVC FI-P-16,0-TPO FI-P-16,0-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 4. 58

Flat roof fastening systems for concrete deck Combination table isoweld DT-4,8 / DT-S-4,8 / FI-P-16,0 / FI--20 COMBINATION CALCULATION 4 4. 59

Carbon steel fastener Flat roof fastening systems for concrete deck isoweld TI-T25-6,3 isoweld TI-T25-6,3 Technical information Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. 4 Material Fastener TI-T25-6,3 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Sleeves FI--20 Polyamide PA Stress plate FI-P-16,0-PVC / FI-P-16,0-TPO FI-P-16,0-EPDM Steel 0,8 mm esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates FI-P-16,0-PVC FI-P-16,0-TPO FI-P-16,0-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Sleeves FI--20 Sleeve for the isoweld system, head diameter 20 mm. 4. 60

Flat roof fastening systems for concrete deck Carbon steel fastener isoweld TI-T25-6,3 Technical information Tools and accessories ecommendation for pre-drilling ecommendation for installation ZA1/4 -M6-300/750 Hammer drill with weight class 2-3 kg, impact energy 2,5 J Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool 4 Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah Do not use a percussion tool. T25-32-M6 isoweld 3000 / FI-H / FI-Magnet Set FI-Pad Accessory for the manual installation in combination with a power screwdriver or battery tool Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates Cardboard pad for applications on EPS/XPS insulation 4. 61

Carbon steel fastener Flat roof fastening systems for concrete deck isoweld TI-T25-6,3 Order information TL L d d L T25 Ø 9,7 mm KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 4 Order code TI-T25-60 Product / Application Approval Type d L Application information Carbon steel TI-T25-60 TI-T25-70 TI-T25-80 KL TI-T25-90 TI-T25-100 Sd TI-T25-120 TI-T25-140 ETA-08/0262 TI-T25-160 Build-up: Thickness concrete deck t min. 40 mm. Edge distance: min. 50 mm NEW: FM Approval! APPOVED TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 Thread length TL: Fastener length 60-160 mm: TL = 50 mm Setting: Sd (Setting depth): min. 20 mm Depth of pilot hole to be min. 15 mm deeper than the setting depth of the fastener, depending on site conditions. Plastic NEW: FM Approval! ETA-08/0262 APPOVED FI-- FI-- FI-- FI-- FI-- FI-- FI-- FI-- 20x 20x 20x 20x 20x 20x 20x 20x 40 70 100 130 160 190 230 300 KL see combination table Stress plates FI-P-16,0-PVC FI-P-16,0-TPO FI-P-16,0-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 4. 62

Flat roof fastening systems for concrete deck Tabella delle combinazioni isoweld TI-T25-6,3 / FI-P-16,0 / FI--20 COMBINATION CALCULATION 4 4. 63

Carbon steel fastener Flat roof fastening systems for concrete deck isoweld TIA-T25-6,3 isoweld TIA-T25-6,3 Technical information Application For the fastening of waterproof membrane and tapered insulation to concrete and to thin concrete roof liner trays. 4 Material Fastener TIA-T25-6,3 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Sleeves FI--20 Polyamide PA Stress plate FI-P-16,0-PVC / FI-P-16,0-TPO FI-P-16,0-EPDM Steel 0,8 mm esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates FI-P-16,0-PVC FI-P-16,0-TPO FI-P-16,0-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Sleeves FI--20 Sleeve for the isoweld system, head diameter 20 mm. 4. 64

Flat roof fastening systems for concrete deck Carbon steel fastener isoweld TIA-T25-6,3 Technical information Tools and accessories ecommendation for pre-drilling ecommendation for installation ZA1/4 -M6-300/750 Hammer drill with weight class 2-3 kg, impact energy 2,5 J Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool 4 Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah Do not use a percussion tool. T25-32-M6 isoweld 3000 / FI-H / FI-Magnet Set FI-Pad Accessory for the manual installation in combination with a power screwdriver or battery tool Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates Cardboard pad for applications on EPS/XPS insulation 4. 65

Carbon steel fastener Flat roof fastening systems for concrete deck isoweld TIA-T25-6,3 Order information d d T25 Ø 9,7 mm L L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 4 Order code TIA-T25-70 Product / Application Approval Type d L Application information Carbon steel TIA-T25- TIA-T25- TIA-T25- TIA-T25-70 90 120 150 Sd KL min. Sd KL max. ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 Build-up: Thickness concrete deck t min. 40 mm. Edge distance: min. 50 mm Setting: Sd (Setting depth): min. 20 mm Depth of pilot hole to be min. 15 mm deeper than the setting depth of the fastener, depending on site conditions. Plastic NEW: FM Approval! ETA-08/0262 APPOVED FI-- FI-- FI-- FI-- FI-- FI-- FI-- FI-- 20x 20x 20x 20x 20x 20x 20x 20x 40 70 100 130 160 190 230 300 KL see combination table Stress plates FI-P-16,0-PVC FI-P-16,0-TPO FI-P-16,0-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 4. 66

Flat roof fastening systems for concrete deck Combination table isoweld TIA-T25-6,3 / FI-P-16,0 / FI--20 for concrete deck A B C D TIA-T25-70 TIA-T25-90 TIA-T25-120 TIA-T25-150 KL min. KL max. KL min. KL max. KL min. KL max. KL min. KL max. Screw Sleeve L No 155 180 210 240 270 300 340 410 145 145 145 145 170 200 240 310 4 Combination table 120 150 180 210 240 270 310 380 115 115 115 140 170 200 240 310 90 120 150 180 210 240 280 350 85 85 110 140 170 200 240 310 70 100 130 160 190 220 260 330 65 80 110 140 170 200 240 310 40 70 100 130 160 190 230 300 1 2 3 4 5 6 7 8 Example Demand KL: 120-210 mm Combination 2C = sleeve 70 mm + screw 120 mm, covering KL 115-150 mm 4C = sleeve 130 mm + screw 120 mm, covering KL 140-210 mm Sd KL min. Sd KL max. KL = total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane 4. 67

Accessories Flat roof fastening systems for concrete deck ZVK / ZAK Order information ZVK-STOP ZVK L F L F d diameter L Length F working length All measures in mm 4 Order code ZVK- 100x160 Type d F L Code Application information 100x 160 100x 165 STOP 5,0x 55x 115 5,0x 100x 160 5,0x 25x 90 5,0x 35x 100 5,0x 110 5,0x 55x 120 STOP STOP STOP STOP Impact anchor DT-L Impact anchor DT-S-L TI-T25-L* TIA-T25-L* TI-T25-L TIA-T25-L ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- 5,2x 25x 90 5,2x 35x 100 5,2x 110 5,2x 100x 165 STOP STOP STOP STOP TI-T25-L* TIA-T25-L* ZVK-STOP: The special STOP drills additionally core out the insulation providing for easy sleeve insertion and accurate fastener alignment with the pilot hole. ZVK: Conus drills for different use, mostly to replace very long SDS drills ZAK-500 / ZAK-750 / ZAK-1000 - Drill extension for the ZVK conus drills All approvals and recommended design values are based upon close tolerance pilot holes that are drilled with ZVK carbide drill bits. * Technical performance values of the TI fasteners may differ between countries due to variation in the hardness of locally sourced concrete aggregates. Optimum performance can be determined by site testing using different drill diameters, for example between ZVK-4,8 and ZVK-5,2. Consult your SFS representative for further information. 4. 68

Flat roof fastening systems for concrete deck Accessories isoweld TIA-T25-6,3 Tools and accessories Product Drill extension (500 mm, 750 mm and 1000 mm) Order code ZAK-500 ZAK-750 ZAK-1000 Application Drill bit with stopper Drive bar (300 mm and 750 mm) ZVK-5,0x25x90STOP ZVK-5,0x35x100STOP ZVK-5,0x110STOP ZVK-5,0x120STOP ZA¼ -M6-300 ZA¼ -M6-750 4 Drive bar extension (100 mm) ZA¼ -M6-EXT100 Insert bit T25-32-M6 T25-32-M6-ING ZH-11-ING T25-32-M6 T25-32-M6-ING Adjusting tool AJ60x130-TIA Adjusting bit AJ-M6 4. 69

Flat roof fastening systems for aerated concrete deck Fasteners, stress plates and plastic sleeves 5ofast steners and stress plates Product code Page Austenitic stainless steel LBS-S-T25-8,0 ID-70x70 / IF/IG-C-82x40 / ID-82x40 5.3 Carbon steel LBS-T25-8,0 ID-70x70 / IF/IG-C-82x40 / ID-82x40 5.6 isotak Fast en ers and plastic sleeves Product code Page Aust eniticic sta inless steele LBS- S- T25-8,0 45 5.9 Ca rbon ste el, slee eeve system LBS-T25-8,0 45 5. 12 isoweld Fasteners and st ress pla late tes Product code Page 5 Au stenit iticic stainless steel, full met al lic LBS- S-S- S T25-8, 0 FI-P-6,8 -PVC FI-P-6,8-TPO FI-P-6-6,8-EPD PDM 5. 16 Carbon steelel, fu ll metallic LBS-T2 T25-8,0 FI-P -P-6,8-PVC FI-P-6,8-TPO FI-P-6,8,8-EPDM 5. 19 5. 1

Flat roof fastening systems for aerated concrete deck LBS fastening system: the specialist for aerated concrete Existing buildings sometimes have aerated concrete as substructure. SFS intec offers for this special application a tailor-made fastening solution. With the LBS system, the total roof build-up can be fastened securely into the substructure. The LBS is part of the isofast, isotak and isoweld system. 5 The convincing advantages of the LBS fastening systems Special thread design and diameter prevents overtorque and results in good pullout resistance Easy to install without pre-drilling Maximum corrosion resistance Available in austenitic stainless steel A "treadfast" fastener and sleeve combination ensures that the system is safe to walk on Equally suitable for new buildings and renovation work Meeting the challenges of aerated concrete The aerated concrete s light-weight nature and its structure bring special challenges to the fastening task on a flat roof. easonable pullout values are not possible with a standard fastening system. This is why SFS intec developed a special fastener for applications on aearated concrete: The LBS. Its exceptional thread design with a big diameter allows good pullout values. Furthermore, it prevents overtorquing in the setting process. The austenitic stainless steel version fulfils highest corrosion requirements and meets another challenge of aerated concrete applications. 5. 2

Flat roof fastening systems for aerated concrete deck Austenitic stainless steel fastener isofast LBS-S-T25-8,0 isofast LBS-S-T25-8,0 Technical information Application For the fastening of waterproof membrane and insulation to aerated concrete with min. quality class P 3.3 (DIN 4223-1). For aerated concrete substrate applications we recommend the use of fasteners manufactured from austenitic stainless steel, grade AISI 304, European Standard 1.4301 due to the high corrosion resistance of this material. Material Fastener LBS-S-T25-8,0 Austenitic stainless steel, grade AISI 304, European Standard 1.4301, grade A2 Stress plates ID-70x70 / IF/IG-C-82x40 / ID-82x40 Steel 1,0 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements 5 Stress plates ID-70x70 IF/IG-C-82x40 ID-82x40 Stress plate for insulation, hole diameter 7,5 mm Stress plate for membrane and insulation on hard substrates, hole diameter 7,5 mm Stress plate for membrane and insulation, hole diameter 7,5 mm 5. 3

Austenitic stainless steel fastener Flat roof fastening systems for aerated concrete deck isofast LBS-S-T25-8,0 Technical information Tools and accessories ecommendation for installation Bit holder ZA1/4 T25-25-HEX1/4" 5 Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah Do not use a percusion tool. 5. 4

Flat roof fastening systems for aerated concrete deck Austenitic stainless steel fastener isofast LBS-S-T25-8,0 Order information d T25 Ø 9,7 mm KL L TL KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm LBS-S-T25-8,0x 65 Product / Application Approval Type d L KL Application information Stainless steel LBS-S-T25- LBS-S-T25- LBS-S-T25- LBS-S-T25- LBS-S-T25- LBS-S-T25- LBS-S-T25-8,0x 8,0x 8,0x 8,0x 8,0x 8,0x 8,0x 65 85 105 125 145 165 185 5 25 45 65 85 105 125 KL Sd Build-up: Insulation compressive strength at 10% compression min. 0,1 N/mm 2. 5 ETA-08/0262 Clamping length KL: Total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane Thread length TL: Fastener length 65 mm: TL = 57 mm Fastener length 85-185 mm: TL = 70 mm Setting: Sd (Setting depth): min. 60 mm Availability: Availability on request. Please consult your SFS representative for further information. Stress plates ID-70X70 IF/IG-C-82X40 ID-82X40 ID ETA-08/0262 IF/IG-C ETA-08/0262 ETA-08/0262 TEKNISK GODKJENNING APPOVED SINTEFF Certificaton TG 2137 APPOVED ID TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 5. 5

Carbon steel fastener Flat roof fastening systems for aerated concrete deck isofast LBS-T25-8,0 isofast LBS-T25-8,0 Technical information Application For the fastening of waterproof membrane and insulation to aerated concrete with min. quality class P 3.3 (DIN 4223-1). Material 5 Fastener LBS-T25-8,0 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Stress plates ID-70x70 / IF/IG-C-82x40 / ID-82x40 Steel 1,0 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates ID-70x70 IF/IG-C-82x40 ID-82x40 Stress plate for insulation, hole diameter 7,5 mm Stress plate for membrane and insulation on hard substrates, hole diameter 7,5 mm Stress plate for membrane and insulation, hole diameter 7,5 mm 5. 6

Flat roof fastening systems for aerated concrete deck Carbon steel fastener isofast LBS-T25-8,0 Technical information Tools and accessories ecommendation for installation Bit holder ZA1/4 T25-25-HEX1/4" Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool 5 Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah Do not use a percusion tool. 5. 7

Carbon steel fastener Flat roof fastening systems for aerated concrete deck isofast LBS-T25-8,0 Order information d T25 Ø 9,7 mm KL L TL KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 5 LBS-T25-8,0x 65 Product / Application Approval Type d L KL Application information Carbon steel ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 LBS-T25- LBS-T25- LBS-T25- LBS-T25- LBS-T25- LBS-T25- LBS-T25-8,0x 8,0x 8,0x 8,0x 8,0x 8,0x 8,0x 65 85 105 125 145 165 185 5 25 45 65 85 105 125 KL Sd Build-up: Insulation compressive strength at 10% compression min. 0,1 N/mm 2. Clamping length KL: Total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane Thread length TL: Fastener length 65 mm: TL = 57 mm Fastener length 85-185 mm: TL = 70 mm Setting: Sd (Setting depth): min. 60 mm Stress plates ID-70X70 IF/IG-C-82X40 ID-82X40 ID ETA-08/0262 IF/IG-C ETA-08/0262 ETA-08/0262 TEKNISK GODKJENNING APPOVED SINTEFF Certificaton TG 2137 APPOVED ID TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 5. 8

Flat roof fastening systems for aerated concrete deck Austenitic stainless steel fastener isotak LBS-S-T25-8,0 isotak LBS-S-T25-8,0 Technical information Application For the fastening of waterproof membrane and insulation to aerated concrete with min. quality class P 3.3 (DIN 4223-1). For aerated concrete substrate applications we recommend the use of fasteners manufactured from austenitic stainless steel, grade AISI 304, European Standard 1.4301 due to the high corrosion resistance of this material. Material Fastener LBS-S-T25-8,0 Austenitic stainless steel, grade AISI 304, European Standard 1.4301, grade A2 Sleeves 45 High quality polypropylene, PP 5 Sleeves 45 Sleeve for membrane and insulation, head diameter 45 mm 5. 9

Austenitic stainless steel fastener Flat roof fastening systems for aerated concrete deck isotak LBS-S-T25-8,0 Technical information Tools and accessories ecommendation for installation ZA1/4 -M6-300/750 T25-32-M6 Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool 5 Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah Do not use a percusion tool. ZH-11-ING Accessories for the manual installation of isotak fasteners and sleeves 5. 10

Flat roof fastening systems for aerated concrete deck Austenitic stainless steel fastener isotak LBS-S-T25-8,0 Order information L TL d d L T25 Ø 9,7 mm KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm LBS-S-T25-8,0x 105 Product / Application Approval Type d L Application information Stainless steel ETA-08/0262 LBS-S-T25- LBS-S-T25- LBS-S-T25- LBS-S-T25- LBS-S-T25-8,0x 8,0x 8,0x 8,0x 8,0x 105 125 145 165 185 KL Sd Thread length TL: Fastener length 105-185 mm: TL = 70 mm 5 Setting: Sd (Setting depth): min. 60 mm Availability: Availability on request. Please consult your SFS representative for further information. Plastic ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 15 35 65 85 105 135 165 185 195 225 255 285 325 365 405 485 565 645 705 KL see combination table 5. 11

Carbon steel fastener Flat roof fastening systems for aerated concrete deck isotak LBS-T25-8,0 isotak LBS-T25-8,0 Technical information Application For the fastening of waterproof membrane and insulation to aerated concrete with min. quality class P 3.3 (DIN 4223-1). 5 Material Fastener LBS-T25-8,0 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Sleeves 45 High quality polypropylene, PP Sleeves 45 Sleeve for membrane and insulation, head diameter 45 mm 5. 12

Flat roof fastening systems for aerated concrete deck Carbon steel fastener isotak LBS-T25-8,0 Technical information Tools and accessories ecommendation for installation ZA1/4 -M6-300/750 T25-32-M6 Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah 5 Do not use a percusion tool. ZH-11-ING Accessories for the manual installation of isotak fasteners and sleeves 5. 13

Carbon steel fastener Flat roof fastening systems for aerated concrete deck isotak LBS-T25-8,0 Order information L TL d d L T25 Ø 9,7 mm KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 5 LBS-T25-8,0x 105 Product / Application Approval Type d L Application information Carbon steel ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 LBS-T25- LBS-T25- LBS-T25- LBS-T25- LBS-T25-8,0x 8,0x 8,0x 8,0x 8,0x 105 125 145 165 185 KL Sd Thread length TL: Fastener length 105-185 mm: TL = 70 mm Setting: Sd (Setting depth): min. 60 mm Plastic ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 15 35 65 85 105 135 165 185 195 225 255 285 325 365 405 485 565 645 705 KL see combination table 5. 14

Flat roof fastening systems for aerated concrete deck Combination table isotak LBS-S-T25-8,0 / LBS-T25-8,0 / 45 COMBINATION CALCULATION 5 5. 15

Austenitic stainless steel fastener Flat roof fastening systems for aerated concrete deck isoweld LBS-S-T25-8,0 isoweld LBS-S-T25-8,0 Technical information Application For the fastening of waterproof membrane and insulation to aerated concrete with min. quality class P 3.3 (DIN 4223-1). For aerated concrete substrate applications we recommend the use of fasteners manufactured from austenitic stainless steel, grade AISI 304, European Standard 1.4301 due to the high corrosion resistance of this material. 5 Material Fastener LBS-S-T25-8,0 Austenitic stainless steel, grade AISI 304, European Standard 1.4301, grade A2 Stress plate FI-P-6,8-PVC / FI-P-6,8-TPO FI-P-6,8-EPDM Steel 0,8 mm esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm 5. 16

Flat roof fastening systems for aerated concrete deck Austenitic stainless steel fastener isoweld LBS-S-T25-8,0 Technical information Tools and accessories ecommendation for installation Bit holder ZA1/4 T25-25-HEX1/4" Power screwdriver - 300-700 rpm - Min. 500 W Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool 5 Do not use a percusion tool. isoweld 3000 / FI-H / FI-Magnet Set FI-Pad Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates Cardboard pad for applications on EPS/XPS insulation 5. 17

Austenitic stainless steel fastener Flat roof fastening systems for aerated concrete deck isoweld LBS-S-T25-8,0 Order information d T25 Ø 9,7 mm KL L TL KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 5 LBS-S-T25-8,0x 65 Product / Application Approval Type d L KL Application information Stainless steel LBS-S-T25- LBS-S-T25- LBS-S-T25- LBS-S-T25- LBS-S-T25- LBS-S-T25- LBS-S-T25-8,0x 8,0x 8,0x 8,0x 8,0x 8,0x 8,0x 65 85 105 125 145 165 185 5 25 KL 45 65 85 Sd 105 125 Build-up: Insulation compressive strength at 10% compression min. 0,1 N/mm 2. ETA-08/0262 Clamping length KL: Total roof build-up between top edge substrate and top edge insulation KL = thickness vapour barrier + thickness insulation Thread length TL: Fastener length 65 mm: TL = 57 mm Fastener length 85-185 mm: TL = 70 mm Setting: Sd (Setting depth): min. 60 mm Availability: Availability on request. Please consult your SFS representative for further information. Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 5. 18

Flat roof fastening systems for aerated concrete deck Carbon steel fastener isoweld LBS-T25-8,0 isoweld LBS-T25-8,0 Technical information Application For the fastening of waterproof membrane and insulation to aerated concrete with min. quality class P 3.3 (DIN 4223-1). Material Fastener LBS-T25-8,0 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Stress plate FI-P-6,8-PVC / FI-P-6,8-TPO FI-P-6,8-EPDM Steel 0,8 mm esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements 5 Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm 5. 19

Carbon steel fastener Flat roof fastening systems for aerated concrete deck isoweld LBS-T25-8,0 Technical information Tools and accessories ecommendation for installation Bit holder ZA1/4 T25-25-HEX1/4" 5 Power screwdriver - 300-700 rpm - Min. 500 W Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool Do not use a percusion tool. isoweld 3000 / FI-H / FI-Magnet Set FI-Pad Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates Cardboard pad for applications on EPS/XPS insulation 5. 20

Flat roof fastening systems for aerated concrete deck Carbon steel fastener isoweld LBS-T25-8,0 Order information d T25 Ø 9,7 mm KL L TL KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm LBS-T25-8,0x 65 Product / Application Approval Type d L KL Application information Carbon steel ETA-08/0262 LBS-T25- LBS-T25- LBS-T25- LBS-T25- LBS-T25- LBS-T25- LBS-T25-8,0x 8,0x 8,0x 8,0x 8,0x 8,0x 8,0x 65 85 105 125 145 165 185 5 25 45 65 85 105 125 KL Sd Build-up: Insulation compressive strength at 10% compression min. 0,1 N/mm 2. 5 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 Clamping length KL: Total roof build-up between top edge substrate and top edge insulation KL = thickness vapour barrier + thickness insulation Thread length TL: Fastener length 65 mm: TL = 57 mm Fastener length 85-185 mm: TL = 70 mm Setting: Sd (Setting depth): min. 60 mm Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 5. 21

Flat roof fastening systems for timber deck Fasteners, stress plates and plastic sleeves 6ofast steners and stress pla late tes Product code Page Carb on steel IG -6,0 ID-7-70x 70 / ID-82x40 6. 2 Au stenitic stainle less ste teel IW-S-5,0 IC/ C/W- 82 x40 6.6 Ca rbon steelel IWF-5, 2 IC/ W-82x40 6. 9 Carbon steelel IWF-T-B4 B40-0-5, 2 MW-40-FH 6.13 isot ak Fa sten enerer s and plastic sleeve s Prod uct code Page Carbon steelel TS-T25-6 -6,0 4 5 6. 17 is ow eld Fasteners, stress plat es and plastic sleeves Product co de Page 6 Carbon ste el, full met etalli li c IWF-5,2 FI-P-6,8-PVC / FI-P- 6,8-8-TP O / FI-P -P-6-6,8-E -EPDM 6. 23 Carbon ste el, full metallic TS-T25-6,0 FI -P-6,8,8-P VC / FI- P- 6,8- TPO/ FI-P-6, 6,8- EP DM 6.26 Aust eniticic stainle less steel el, full metallic IW-S-5,0 FI-P-6,8-PVC / FI-P- 6, 8- TPO/ FI-P-6, 6,8-8-EP EPDM 6.29 Ca rbon steel, sl eeve system TS-T -T25 25-6 -6,0 FI-P -16, 6,0-0-PV PVC / FI -P-1-16, 0-TP TPO/ FI- I-P- 16,0 -EPD PDM FI--20 6.32 6. 1

Carbon steel fastener Flat roof fastening systems for timber deck isofast IG-6,0 isofast IG-6,0 Technical information Application For the fastening of waterproof membrane and insulation to timber decks, like timber formwork, plywood or oriented strand board (OSB). The recommended minimum thickness of the deck is 18 mm. 6 Material Fastener IG-6,0 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Stress plates Stress plates ID-70x70 / ID-82x40 Steel 1,0 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements ID-70x70 ID-82x40 Stress plate for insulation, hole diameter 7,5 mm Stress plate for membrane and insulation, hole diameter 7,5 mm 6. 2

Flat roof fastening systems for timber deck Carbon steel fastener isofast IG-6,0 Technical information Tools and accessories ecommendation for installation ZA1/4" E380 Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah IF80-L IF80-S IF240 New: Battery version! 6 Stand-up setting tool for the installation of isofast fasteners and stress plates Stand-up setting tool for the installation of isofast fasteners and stress plates Automated setting tool for the installation of belted isofast fasteners and stress plates. 6. 3

Carbon steel fastener Flat roof fastening systems for timber deck isofast IG-6,0 Order information d Hexagon 8 mm KL L TL KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 6 Order code IG- 6,0x 80 Product / Application Approval Type d L KL Application information Carbon steel ETA-08/0262 APPOVED IG- IG- IG- IG- IG- IG- IG- 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 80 90 100 120 140 160 180 50 60 70 90 110 130 150 KL Build-up: Insulation compressive strength at 10% compression min. 0,1 N/mm 2. Clamping length KL: Total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane Screw length L: L = KL + 30 mm Thread length TL: TL = 55 mm Stress plates ID-70X70 ID-82X40 ID ETA-08/0262 ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 APPOVED ID TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 6. 4

Flat roof fastening systems for timber deck Carbon steel fastener isofast IG-6,0 Order information d Hexagon 8 mm belted KL L TL KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm Order code IG- M- 6,0x 80 Product / Application Approval Type M d L KL Application information Carbon steel IG- IG- IG- IG- IG- IG- IG- M- M- M- M- M- M- M- 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 80 90 100 120 140 160 180 50 60 70 90 110 130 150 KL Build-up: Insulation compressive strength at 10% compression min. 0,1 N/mm 2. ETA-08/0262 APPOVED Clamping length KL: Total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane Screw length L: L = KL + 30 mm Thread length TL: TL = 55 mm Availability: Availability of belted fasteners on request. 6 Stress plates ID-70X70 ID-82X40 ID ETA-08/0262 ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 APPOVED ID TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 6. 5

Austenitic stainless steel fastener Flat roof fastening systems for timber deck isofast IW-S-5,0 isofast IW-S-5,0 Technical information Application For the fastening of waterproof membrane and insulation to timber decks, like timber formwork, plywood or oriented strand board (OSB). The recommended minimum thickness of the deck is 18 mm. For applications with internal relative humidity higher than 70%, chemically agressive atmospheres / conditions, locations with agressive local conditions (e.g. coastal environments). For refurbishment applications with unknown condition of the existing build-up or build-up with abrasive layers that may damage the corrosion protection. If extended design life / warranty is required. 6 Material Fastener IW-S-5,0 Austenitic stainless steel, grade AISI 304, European Standard 1.4301, grade A2 Stress plates IC/W-82x40 Steel 1,0 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Stress plates IC/W-82x40 Stress plate for membrane and insulation, hole diameter 5,1 mm 6. 6

Flat roof fastening systems for timber deck Austenitic stainless steel fastener isofast IW-S-5,0 Technical information Tools and accessories ecommendation for installation Bit holder ZA1/4 Z2-25-HEX1/4 Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah 6 6. 7

Austenitic stainless steel fastener Flat roof fastening systems for timber deck isofast IW-S-5,0 Order information d PZ2, Ø 10 mm KL L TL KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm Order code IW-S- 5,0x 45 Product / Application Approval Type d L KL Application information Stainless steel IW-S- 5,0x 45 15 KL Build-up: Insulation compressive strength at 10% compression min. 0,1 N/mm 2. 6 ETA-08/0262 Clamping length KL: Total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane Screw length L: L = KL + 30 mm Thread length TL: TL = 40 mm Stress plates IC/W-82X40 ETA-08/0262 IC/W 6. 8

Flat roof fastening systems for timber deck Carbon steel fastener isofast IWF-5,2 isofast IWF-5,2 Technical information Application For the fastening of waterproof membrane and insulation to timber decks, like timber formwork, plywood or oriented strand board (OSB). The recommended minimum thickness of the deck is 18 mm. Material Fastener IWF-5,2 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Stress plates IC/W-82x40 Steel 1,0 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements 6 Stress plates IC/W-82x40 Stress plate for membrane and insulation, hole diameter 5,1 mm 6. 9

Carbon steel fastener Flat roof fastening systems for timber deck isofast IWF-5,2 Technical information Tools and accessories ecommendation for installation Bit holder ZA1/4 H2-25-HEX1/4 Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool 6 Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah 6. 10

Flat roof fastening systems for timber deck Carbon steel fastener isofast IWF-5,2 Order information d PH2, Ø 9,4 mm KL TL L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm Order code IWF- 5,2x 25 Product / Application Approval Type d L KL Application information Carbon steel IWF- IWF- IWF- IWF- 5,2x 5,2x 5,2x 5,2x 25 35 45 55 * 5 15 25 KL Build-up: Insulation compressive strength at 10% compression min. 0,1 N/mm 2. ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 Clamping length KL: Total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane * For special applications, please consult your SFS representative. Screw length L: L = KL + 30 mm Thread length TL: TL = L - 3 mm 6 Stress plates IC/W-82X40 ETA-08/0262 IC/W 6. 11

Flat roof fastening systems for timber deck Profit from a beneficial fastening system for timber decks The isofast IWF-T-B40 is an ideal fastening system for the direct fixing of membranes to timber sub-frames (wood and synthetics like triple-layer, ply, wooden frames, etc.). The special design of the plate allows the pre-assembling with IWF fasteners. Furthermore, by using the setting tool MV28 a fast and secure setting is possible. The convincing advantages of the isofast IWF-T-B40 fastening systems Pre-assembled fastener and stress plate Optimum insertion due to the special fibercut thread form Ergonomic standing position when installing using the dedicated setting tool Meets extreme corrosion resistance criteria 6 6. 12

Flat roof fastening systems for timber deck Carbon steel fastener isofast IWF-T-B40-5,2 isofast IWF-T-B40-5,2 Technical information Application For the fastening of waterproof membrane and insulation to timber decks, like timber formwork, plywood or oriented strand board (OSB). The recommended minimum thickness of the deck is 18 mm. Material Fastener IWF-5,2 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Stress plates MW-40-FH Steel 1,0 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements 6 Stress plates MW-40-FH Stress plate for membrane 6. 13

Carbon steel fastener Flat roof fastening systems for timber deck isofast IWF-T-B40-5,2 Technical information Tools and accessories ecommendation for installation Bit holder ZA1/4 H2-25-HEX1/4 Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool 6 Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah MV28-500 / MV28-750 Accessory for a stand-up installation of isofast fasteners and stress plates 6. 14

Flat roof fastening systems for timber deck Carbon steel fastener isofast IWF-T-B40-5,2 Order information d TL KL L PH2, Ø 9,4 mm Fastener with pre-assembled stress plate KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code IWF-T-B40-5,2x 25 Product / Application Approval Type d L KL Application information Carbon steel IWF-T-B40- IWF-T-B40- IWF-T-B40- IWF-T-B40-5,2x 5,2x 5,2x 5,2x 25 35 45 55 * 5 15 25 KL Build-up: Insulation compressive strength at 10% compression min. 0,1 N/mm 2. 6 ETA-08/0262 Clamping length KL: Total roof build-up between top edge substrate and top edge membrane TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 KL = thickness vapour barrier + thickness insulation + thickness membrane * For special applications, please consult your SFS representative. Screw length L: L = KL + 30 mm Thread length TL: TL = L - 3 mm Stress plates MW-40-FH ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 6. 15

Flat roof fastening systems for timber deck Because conventional wood screws are inadequate for the fastening of membrane through insulation boards into timber decks, dedicated fastening systems are required for this appli- cation. Specially designed fasteners from SFS intec can be used in combination with either plastic sleeves or stress plates. 6 A treadfast solution of fastener and sleeve ensures that the system is safe to walk on Ideal for applications with increased insulation thickness Cost-effective due to combination of screw with plastic sleeve Excellent torque transfer through the T25 drive Specially designed installation tool available, saving time and money Particularly suitable for timber decking applications including timber sub-structures, plywood, multi layer panels and similar applications 6. 16

Flat roof fastening systems for timber deck Carbon steel fastener isotak TS-T25-6,0 isotak TS-T25-6,0 Technical information Application For the fastening of waterproof membrane and insulation to timber decks, like timber formwork, plywood or oriented strand board (OSB). The recommended minimum thickness of the deck is 18 mm. Material Fastener TS-T25-6,0 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Sleeves 45 Sleeves 45 High quality polypropylene, PP 6 Sleeve for membrane and insulation, head diameter 45 mm 6. 17

Carbon steel fastener Flat roof fastening systems for timber deck isotak TS-T25-6,0 Technical information Tools and accessories ecommendation for installation ZA1/4 -M6-300/750 T25-32-M6 Power screwdriver - 300-700 rpm - Min. 500 W Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool 6 ZH-11-ING IT19 Accessories for the manual installation of isotak fasteners and sleeves Stand-up setting tool for the installation of isotak fasteners and sleeves 6. 18

Flat roof fastening systems for timber deck Carbon steel fastener isotak TS-T25-6,0 Order information TL L d d L T25 recess Ø 9,7 mm KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm Order code TS-T25-6,0x 70 Product / Application Approval Type d L Application information Carbon steel ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25-6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 70 80 90 100 110 120 130 140 160 180 200 220 240 KL Sd Thread length TL: Fastener length 60-70 mm: TL = - 6 mm Fastener length 80-240 mm: TL = 70 mm Setting: Sd (Setting depth): min. 30 mm 6 Plastic ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 15 35 65 85 105 135 165 185 195 225 255 285 325 365 405 485 565 645 705 KL see combination table 6. 19

Combination table Flat roof fastening systems for timber deck isotak TS-T25-6,0 / 45 6 COMBINATION CALCULATION 6. 20

Flat roof fastening systems for timber deck 6 6. 21

Flat roof fastening systems for timber deck The new SFS intec system is a revolutionary, non-penetrating field fastening system for flat roofs. follows on from the triedand-trusted and systems in offering another economical, secure and permanent method of fixing insulation material and membranes on flat roofs. The system, developed entirely by SFS intec, is ideal for PVC, TPO and EPDM membranes. The stress plates used to secure the insulation to the roof are welded to it by inductive heating, creating a non-penetrating connection. The weld is achieved using the 3000 induction tool, developed in-house, which is equipped with an array of safety functions. These include a search-and-control function, automatic temperature variation control and mains current fluctuation compensation. 6 Fixing is independent of the membrane joints Only one membrane width is needed No additional insulation fixing No membrane penetration educed membrane overlaps Coverage independent of fixing progress so much quicker Fewer fixing points Ergonomic, upright installation with height adjustable handle Simple, user-friendly display with integrated counter Temperature compensation function automatically adapts to variations in temperature Automatic adjustment to power fluctuations Search-and-control function allows only perfect welds Acoustic and visual indicators at the start and finish of each weld Additional hand inductor for tight spaces and vertical welds 6. 22

Flat roof fastening systems for timber deck Carbon steel fastener isoweld IWF-5,2 isoweld IWF-5,2 Technical information Application For the fastening of waterproof membrane and insulation to timber decks, like timber formwork, plywood or oriented strand board (OSB). The recommended minimum thickness of the deck is 18 mm. Material Fastener IWF-5,2 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Stress plates Stress plates FI-P-6,8-PVC / FI-P-6,8-TPO FI-P-6,8-EPDM Steel 0,8 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements 6 FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm 6. 23

Carbon steel fastener Flat roof fastening systems for timber deck isoweld IWF-5,2 Technical information Tools and accessories ecommendation for installation Bit holder ZA1/4" H2-25-HEX1/4 Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah 6 FI80-L FI80-S isoweld 3000 / FI-H / FI-Magnet Set Stand-up setting tool for the installation of isoweld fasteners and stress plates Stand-up setting tool for the installation of isoweld fasteners and stress plates Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates FI-Pad Cardboard pad for applications on EPS/XPS insulation 6. 24

Flat roof fastening systems for timber deck Carbon steel fastener isoweld IWF-5,2 Order information d PH2, Ø 9,4 mm KL TL L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm Order code IWF- 5,2x 25 Product / Application Approval Type d L KL Application information Carbon steel IWF- IWF- IWF- IWF- 5,2x 5,2x 5,2x 5,2x 25 35 45 55 * 5 15 25 KL Build-up: Insulation compressive strength at 10% compression min. 0,1 N/mm 2. ETA-08/0262 Clamping length KL: Total roof build-up between top edge substrate and top edge insulation TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 KL = thickness vapour barrier + thickness insulation * For special applications, please consult your SFS representative. Screw length L: L = KL + 30 mm Thread length TL: TL = L - 3 mm 6 Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 6. 25

Carbon steel fastener Flat roof fastening systems for timber deck isoweld TS-T25-6,0 isoweld TS-T25-6,0 Technical information Application For the fastening of waterproof membrane and insulation to timber decks, like timber formwork, plywood or oriented strand board (OSB). The recommended minimum thickness of the deck is 18 mm. Material 6 Fastener TS-T25-6,0 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Stress plates FI-P-6,8-PVC FI-P-6,8-TPO Stress plates FI-P-6,8-PVC / FI-P-6,8-TPO FI-P-6,8-EPDM Steel 0,8 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements FI-P-6,8-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm 6. 26

Flat roof fastening systems for timber deck Carbon steel fastener isoweld TS-T25-6,0 Technical information Tools and accessories ecommendation for installation Bit holder ZA1/4" T25-25-HEX1/4" Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah FI80-L FI80-S isoweld 3000 / FI-H / FI-Magnet Set 6 Stand-up setting tool for the installation of isoweld fasteners and stress plates Stand-up setting tool for the installation of isoweld fasteners and stress plates Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates FI-Pad Cardboard pad for applications on EPS/XPS insulation 6. 27

Carbon steel fastener Flat roof fastening systems for timber deck isoweld TS-T25-6,0 Order information d T25 recess Ø 9,7 mm KL L TL KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 6 Order code TS-T25-6,0x 50 Product / Application Approval Type d L KL Application information Carbon steel ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25-6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 50 60 70 80 90 100 110 120 130 140 160 180 200 220 240 20 30 40 50 60 70 80 90 100 110 130 150 170 190 210 KL Build-up: Insulation compressive strength at 10% compression min. 0,1 N/mm 2. Clamping length KL: Total roof build-up between top edge substrate and top edge insulation KL = thickness vapour barrier + thickness insulation Screw length L: L = KL + 30 mm Thread length TL: Fastener length 60-70 mm: TL = - 6 mm Fastener length 80-240 mm: TL = 70 mm Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 6. 28

Flat roof fastening systems for timber deck Austenitic stainless steel fastener isoweld IW-S-5,0 isoweld IW-S-5,0 Technical information Application For the fastening of waterproof membrane and insulation to timber decks, like timber formwork, plywood or oriented strand board (OSB). The recommended minimum thickness of the deck is 18 mm. For applications with internal relative humidity higher than 70%, chemically agressive atmospheres / conditions, locations with agressive local conditions (e.g. coastal environments). For refurbishment applications with unknown condition of the existing build-up or build-up with abrasive layers that may damage the corrosion protection. If extended design life / warranty is required. Material Fastener IW-S-5,0 Austenitic stainless steel, grade AISI 304, European Standard 1.4301, grade A2 Stress plates FI-P-6,8-PVC / FI-P-6,8-TPO FI-P-6,8-EPDM Steel 0,8 mm, zinc plated esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements 6 Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm 6. 29

Austenitic stainless steel fastener Flat roof fastening systems for timber deck isoweld IW-S-5,0 Technical information Tools and accessories ecommendation for installation Bit holder ZA1/4" Z2-25-HEX1/4 Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah 6 FI80-L FI80-S isoweld 3000 / FI-H / FI-Magnet Set Stand-up setting tool for the installation of isoweld fasteners and stress plates Stand-up setting tool for the installation of isoweld fasteners and stress plates Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates FI-Pad Cardboard pad for applications on EPS/XPS insulation 6. 30

Flat roof fastening systems for timber deck Austenitic stainless steel fastener isoweld IW-S-5,0 Order information d PZ2, Ø 10 mm KL L TL KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm Order code IW-S- 5,0x 45 Product / Application Approval Type d L KL Application information Stainless steel IW-S- 5,0x 45 15 KL Build-up: Insulation compressive strength at 10% compression min. 0,1 N/mm 2. ETA-08/0262 Clamping length KL: Total roof build-up between top edge substrate and top edge membrane KL = thickness vapour barrier + thickness insulation + thickness membrane Screw length L: L = KL + 30 mm Thread length TL: TL = 40 mm 6 Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 6. 31

Carbon steel fastener Flat roof fastening systems for timber deck isoweld TS-T25-6,0 isoweld TS-T25-6,0 Technical information Application For the fastening of waterproof membrane and insulation to timber decks, like timber formwork, plywood or oriented strand board (OSB). The recommended minimum thickness of the deck is 18 mm. Material 6 Fastener TS-T25-6,0 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI tress plates FI-P-16,0-PVC Sleeve FI--20 High quality polyamide, PA FI-P-16,0-TPO Stress plate FI-P-16,0-PVC / FI-P-16,0-TPO FI-P-16,0-EPDM Steel 0,8 mm esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements FI-P-16,0-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 16,0 mm Sleeves FI--20 Sleeve for the isoweld system, head diameter 20 mm 6. 32

Flat roof fastening systems for timber deck Carbon steel isoweld TS-T25-6,0 Technical information Tools and accessories ecommendation for installation ZA1/4 -M6-300/750 T25-32-M6-ING Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah FI80-T19 isoweld 3000 / FI-H / FI-Magnet Set FI-Pad 6 Stand-up setting tool for the installation of isoweld fasteners, stress plates and sleeves Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates Cardboard pad for applications on EPS/XPS insulation 6. 33

Carbon steel fastener Flat roof fastening systems for timber deck isoweld TS-T25-6,0 Order information d d T25 recess Ø 9,7 mm L TL L KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm 6 Order code TS-T25-6,0x 70 Product / Application Approval Type d L Application information Carbon steel ETA-08/0262 TEKNISK GODKJENNING SINTEFF Certificaton TG 2137 TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25- TS-T25-6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 6,0x 70 80 90 100 110 120 130 140 160 180 200 220 240 Screw length L: L = KL + 30 mm KL Sd Thread length TL: Fastener length 60-70 mm: TL = - 6 mm Fastener length 80-240 mm: TL = 70 mm Setting: Sd (Setting depth): min. 30 mm Plastic NEW: FM Approval! ETA-08/0262 APPOVED FI-- FI-- FI-- FI-- FI-- FI-- FI-- FI-- 20x 20x 20x 20x 20x 20x 20x 20x 40 70 100 130 160 190 230 300 KL see combination table Stress plates FI-P-16,0-PVC FI-P-16,0-TPO FI-P-16,0-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 6. 34

Flat roof fastening systems for timber deck Combination table isoweld TS-T25-6,0 / FI-P-16,0 / FI--20 COMBINATION CALCULATION 6 6. 35

Flat roof fastening systems for critical deck Peel ivet System 7ofo ast Product code Page Aluminiu ium Drill accessories HSS 7.6 isow eld Aluminiuiu m, full met allic TP- L-6, 6,3 ID-70x 70 / IF/ IG -C-8-82x40 / ID-82x40 7.3 Pr oduct code TP-L-6, 3 FI-P-6,8-PVC / FI-P- 6,8- TPO / FI-P-6,8-EPD PDM Page 7.7 Drill accessories HSS 7.10 7 7. 1

Flat roof fastening systems for critical deck Safe fixing to aluminium sheet, thin concrete, timber and cement boards is challenging when installing flat roof insulation. Conventional screws do not offer adequate performance or require to be reinforced with additional security features. The TP-L riveting system will remove the additional time and cost otherwise involved. The Peel ivet is part of the and system. High corrosion resistance (rivet sleeve manufactured from aluminium / magnesium alloy, centre pin from zinc coated carbon steel) Consistently high pullout values due to dedicated system design Center pin remains in the rivet sleeve Ergonomic installation using the IP50-B Peel ivet setting tool Dynamic wind loads present no problem Can be combined with standard stress plates Also suitable for thin steel decks 7 After pre-drilling the substrate, the peel rivets can be rapidly fitted using the IP50-B setting tool. As the centre pin is withdrawn, the rivet is deformed, creating four arms which produce a contact surface equivalent to five times the shaft diameter. In combination with recommended stress plates the rivets provide for a consistently high pullout requirement. 7. 2

Flat roof fastening systems for critical deck Peel ivet System isofast TP-L-6,3 isofast TP-L-6,3 Technical information Application For the fastening of waterproof membrane and insulation to aluminium, thin concrete, wood-wool and problem decks, where conventional threaded fasteners may not achieve sufficient performance. Minimum thickness for steel: Minimum thickness for aluminium: Minimum clamping length: TP-L t 0,50 mm t 0,60 mm KL 10,0 mm Material Fastener TP-L-6,3 Body: Aluminium/magnesium alloy Mandrel: Zinc plated steel Stress plates ID-70x70 IF/IG-C-82x40 Stress plates ID-70x70 / IF/IG-C-82x40 / ID-82x40 Steel 1,0 mm, zinc plated esistance at 15 cycles Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements ID-82x40 7 Stress plate for insulation, hole diameter 7,5 mm Stress plate for membrane and insulation on hard substrates, hole diameter 7,5 mm Stress plate for membrane and insulation, hole diameter 7,5 mm 7. 3

Peel ivet System Flat roof fastening systems for critical deck isofast TP-L-6,3 Technical information Tools and accessories IP50-B TAUUS 2 Peel ivet Battery setting tool for the installation of TP-L Peel ivets Pneumatic-hydraulic setting tool for the installation of TP-L Peel ivets 7 7. 4

Flat roof fastening systems for critical deck Peel ivet System isofast TP-L-6,3 Order information L Head Ø 12,5 mm d KL KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm Order code KL TP-L- 38 ID-82x40 Product / Application Approval Type d L IF/IG-C-82x40 ID-70x70 Application information Aluminium TP-L- TP-L- TP-L- TP-L- TP-L- TP-L- TP-L- TP-L- TP-L- TP-L- TP-L- TP-L- 38 51 64 76 88 102 127 152 178 203 229 254 10* - 15 10* - 26 20* - 39 20* - 51 15* - 20 15* - 26 25* - 39 25* - 51 28-63 42-77 67-102 92-127 118-153 143-178 169-204 194-229 KL t min. steel: 0,5 mm t min. alu: 0,6 mm Build-up: Insulation compressive strength at 10% compression min. 0,1 N/mm 2. Weight density of EPS insulation min. 20 kg/m3. Clamping length KL: KL = total roof build-up between bottom edge substrate and top edge membrane ETA-08/0262 KL = thickness substrate + thickness vapour barrier + thickness insulation + thickness membrane *Minimum KL due to the mandrel which stays inside the body of the Peel ivet. Smaller KL than minimum KL are not allowed. Setting: To be installed via a pilot hole. Pull-out and application tests recommended. 7 Stress plates ID-70X70 IF/IG-C-82X40 ID-82X40 ID ETA-08/0262 IF/IG-C ETA-08/0262 ETA-08/0262 TEKNISK GODKJENNING TEKNISK GODKJENNING APPOVED SINTEFF Certificaton TG 2137 SINTEFF Certificaton TG 2137 ID 7. 5

Accessories Flat roof fastening systems for critical deck HSS Order information d L f d diameter L Length f flute length All measures in mm Order code HSS- 7,0x 109/ 69 Type d L f Application information HSS- HSS- HSS- HSS- HSS- 7,0x 7,0x 7,0x 7,0x 7,0x 109/ 156/ 225/ 290/ 370/ 69 102 155 200 250 For steel or aluminium decks. 7 7. 6

Flat roof fastening systems for critical deck Peel ivet System isoweld TP-L-6,3 isoweld TP-L-6,3 Technical information Application For the fastening of waterproof membrane and insulation to aluminium, thin concrete, wood-wool and problem decks, where conventional threaded fasteners may not achieve sufficient performance. Minimum thickness for steel: Minimum thickness for aluminium: Minimum clamping length: TP-L t 0,50 mm t 0,60 mm KL 10,0 mm Material Fastener TP-L-6,3 Body: Aluminium/magnesium alloy Mandrel: Zinc plated steel Stress plates Stress plates FI-P-6,8-PVC / FI-P-6,8-TPO FI-P-6,8-EPDM Steel 0,8 mm, esistance at 15 cycles Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements 7 FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM Stress plate for PVC membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for TPO membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm Stress plate for EPDM membranes and insulation, plate diameter 80 mm, hole diameter 6,8 mm 7. 7

Peel ivet System Flat roof fastening systems for critical deck isoweld TP-L-6,3 Technical information Tools and accessories IP50-B TAUUS 2 Peel ivet isoweld 3000 / FI-H / FI-Magnet Set Battery setting tool for the installation of TP-L Peel ivets Pneumatic-hydraulic setting tool for the installation of TP-L Peel ivets Induction welding tool, hand inductor and magnets for the welding of the membrane to the isoweld stress plates FI-Pad 7 Cardboard pad for applications on EPS/XPS insulation 7. 8

Flat roof fastening systems for critical deck Peel ivet System isoweld TP-L-6,3 Order information L Head Ø 12,5 mm d KL KL clamping length M magazine loaded d thread diameter L length t thickness of structure All measures in mm Order code TP-L- 38 Product Approval Type d L KL Application information Aluminium ETA-08/0262 TP-L- TP-L- TP-L- TP-L- TP-L- TP-L- TP-L- TP-L- TP-L- TP-L- TP-L- TP-L- 38 51 64 76 88 102 127 152 178 203 229 254 10* - 15 10* - 26 20* - 39 20* - 51 28-63 42-77 67-102 92-127 118-153 143-178 169-204 194-229 KL Build-up: Insulation compressive strength at 10% compression min. 0,1 N/mm 2. Weight density of EPS insulation min. 20 kg/m3. Clamping length KL: KL = total roof build-up between bottom edge substrate and top edge insulation t min. steel: 0,5 mm t min. alu: 0,6 mm KL = thickness substrate + thickness vapour barrier + thickness insulation *Minimum KL due to the mandrel which stays inside the body of the Peel ivet. Smaller KL than minimum KL are not allowed. 7 For steel and aluminium decks, the minimum KL = 40 mm Setting: To be installed via a pilot hole. Pull-out and application tests recommended. Stress plates FI-P-6,8-PVC FI-P-6,8-TPO FI-P-6,8-EPDM ETA-08/0262 ETA-08/0262 ETA-08/0262 APPOVED NEW: FM Approval! APPOVED NEW: FM Approval! NEW: EPDM Solution! 7. 9

Accessories Flat roof fastening systems for critical deck HSS Order information d L f d diameter L Length f flute length All measures in mm Order code HSS- 7,0x 109/ 69 Type d L f Application information HSS- HSS- HSS- HSS- HSS- 7,0x 7,0x 7,0x 7,0x 7,0x 109/ 156/ 225/ 290/ 370/ 69 102 155 200 250 For steel or aluminium decks. 7 7. 10

Specialties Specialties 8plication Product code Page Concrete deck DT-14-4,8 8.2 Concrete deck, solid brick N-6, 6,3 8.4 Concrete drilling SD S 8.6 Concrete deck, solid brick IGF-S-T25-8,0 8.7 Side lap stitching SLG-S 8.9 8 8. 1

Carbon steel fastener Specialties DT-14-4,8 DT-14-4,8 Technical information Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. Material Fastener DT-14-4,8 Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles of Kesternich test according to ETAG 006 - D.3.1. and FM Approval Standard 4470 requirements Environment-friendly, free of chromium VI Tools and accessories ecommendation for pre-drilling ZD15 8 Hammer drill with weight class 2-3 kg, impact energy 2,5 J Setting tool for the installation of DT impact anchor 8. 2

Specialties Carbon steel fastener DT-14-4,8 Order information d Mushroom head Ø 14 mm KL L KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code DT-14-38 Product / Application Approval Type d L KL Drill bits Application information Carbon steel DT-14-38 13 160 Build-up: Thickness concrete deck t: min. 60 mm. Edge distance: min. 60 mm Setting: Sd (Setting depth): min. 25 mm Depth of pilot hole to be min.15 mm deeper than the setting depth of the DT impact anchor, depending on site conditions. 8 8. 3

Carbon steel fastener Specialties N-6,3 N-6,3 Technical information Application For the fastening of profiled metal and termination bars directly to concrete and masonry. The N hammer-screw fastener is simple to install, has high pull-out values and is removable. Material Fastener N-6,3 Body: Zinc diecasting Screw: Zinc coated carbon steel Tools and accessories ecommendation for pre-drilling 8 Hammer drill with weight class 2-3 kg, impact energy 2,5 J 8. 4

Specialties Carbon steel fastener N-6,3 Order information d Mushroom head Ø 13,8 mm Countersunk Ø 7,5 mm KL L KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code N10-32 Product / Application Approval Type d L KL Drill bits Application information Carbon steel N10- N16- N28-32 38 50 10 16 28 160 160 160 Insertion: emoval: 8 Sd KL Setting: Sd (Setting depth): min. 22 mm Depth of pilot hole to be min. 15 mm deeper than the setting depth of the N fastener, depending on site conditions. All isofast N fasteners can be combined with washers in different diameters. For further information, availability and delivery time please consult your SFS representative. Example for the order code with washer: N-S19-38. Note: When used in combination with washers the maximum clamping length (KL) of the fastener will be reduced by 3 mm. 8. 5

Accessories Specialties SDS Order information L F SP Carbide-geometry Dynamic, chisel-shaped drill bit head Multi-fluted, spacious KVS-spiral Unique KVS-flute design d diameter L Length F working length All measures in mm Order code SDS- 110/ 50- SP Type d L F Code Application information 110/ 160/ 210/ 260/ 285/ 360/ 410/ 510/ SP SP SP SP SP SP SP SP N-L Impact anchor DT-L Impact anchor DT-S-L Order information L F 4C One piece tip element with optimal 4x90 carbide cutting symmetry for long lifetime when hitting reinforcing steel. Four flute ridges with increased flute pitch provide fast transporting of drilling debris. 8 d diameter L Length F working length All measures in mm Order code SDS- 210/ 150-4C Type d L F Code Application information 210/ 310/ SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- 50-100- 150-200- 225-300- 350-450- SDS- SDS- 150-250- 4C 4C N-L Impact anchor DT-L Impact anchor DT-S-L 4 cutter drill bit 4C for reinforced concrete 4 cutter drill bit 4C for reinforced concrete All approvals and recommended design values are based upon close tolerance pilot holes that are drilled using SFS intec 4C carbide drill bits. 8. 6

Specialties Austenitic stainless steel fastener IGF-S-T25-8,0 IGF-S-T25-8,0 Technical information Application For the fastening of metal and termination bars directly to aerated concrete. Material Fastener IGF-S-T25-8,0 Austenitic stainless steel, grade AISI 304, European Standard 1.4301, grade A2 Tools and accessories ecommendation for installation Bit holder ZA1/4 T25-25-HEX1/4 Power screwdriver - 300-700 rpm - Min. 500 W Accessory for the manual installation in combination with a power screwdriver or battery tool Accessory for the manual installation in combination with a power screwdriver or battery tool 8 Battery tool - 300-700 rpm - Min. 18 V - Battery with min. 2,5 Ah Do not use a percussion tool. 8. 7

Austenitic stainless steel fastener Specialties IGF-S-T25-8,0 Order information d T25 recess Ø 13,6 mm KL L TL KL clamping length M magazine loaded d thread diameter L length TL thread length t thickness of structure All measures in mm Order code IGF-S-T25-8,0x 65 Product / Application Approval Type d L KL Application information Stainless steel IGF-S-T25-8,0x 65 5 Sd Thread length TL: TL = 55 mm Setting: Sd (Setting depth): min. 60 mm The isofast IGF-S-T25 fastener is specially designed for the combination with washers. For further information, availability and delivery time please consult your SFS representative. Example for the order code with washer: IGF-S-T25-S19-8,0x65. Note: When used in combination with washers the maximum clamping length (KL) of the fastener will be reduced by 3 mm. 8 8. 8

Specialties Stainless steel self drilling fastener SLG-S SLG-S Technical information Application Stainless steel fastening of side laps and flashings. The thread-free zone under the fastener head prevents stripping of the threads in the sheets. The sheets are pulled together tightly, clamped in the thread-free zone and sealed. The fasteners can be used without depth locator or torque control. Material Fastener SLG-S Austenitic stainless steel, grade AISI 304 (European Standard 1.4301) or grade AISI 316 (European Standard 1.4401) on request Washer S = Stainless steel, grade AISI 304 (European Standard 1.4301) with vulcanised EPDM Drill point and lead thread section Case hardened, special carbon steel Coloured fastener Coloured fasteners available (fastener head and washer) HD headform / drive Hexagon 8 mm A/F Tools and accessories Quik Drive Socket E480 8 Automatic setting tool to install belted fasteners (25 pcs) with a maximum 15 mm washer and up to a maximum length of 75 mm. ecommended fasteners till now: SLG-S-MQD-S14-20 SLG-T-MQD-A14-20 SL2-MQD-20 SL2-S-MQD-S14-22 SL2-T-MQD-A14-20 SL2-H15-MQD-20 SL3-H15-MQD-32 The E480 setting tool is recommended for installing self drilling fasteners with the hexagon head 8 mm. 8. 9

Stainless steel self drilling fastener Specialties SLG-S Order information d Hexagon 8 mm A/F Coloured fastener KL L W: Washer material S Stainless Steel VD max. penetration KL clamping length HD headform / drive W washer material and diameter d thread diameter L Length t thickness of structure All measures in mm Order code SLG-S- S14-20 Application Product Approval Type W* d L Application range Stainless steel SLG-S- S14-20 VD 10 ETA-10/0198 VD max. steel: 2 x 0,9 mm t min. steel: 2 x 0,4 mm DTU 40.35 40.36 8 8. 10

Fastening to steel and timber structure Self drilling fasteners 9Application Product code Page Steel substructure stainless steel Steel substructure carbon steel Timber substructure Side lap stitching SX3 / SX5 SX14 SD6-H15 SD14-H15 SD6 / SD14 SXW / SW3-T SW3-T-H15 SLG-S / SL2-S SL2-T / SLG-T SL2 / SL2-H15 SL3-H15 9.2 9.4 9.6 9.9 9 9. 1

Stainless steel self drilling fasteners Fastening to steel and timber structure SX3 / SX5 / SX14 SX3 / SX5 / SX14 Technical information Application Stainless steel fastening of steel or aluminium sheet to steel or aluminium structure in one operation: drilling, thread forming and sealing. Material Fastener SX3 / SX5 / SX14 Austenitic stainless steel, grade AISI 304 (European Standard 1.4301) or grade AISI 316 (European Standard 1.4401) on request Washer S = Stainless steel, grade AISI 304 (European Standard 1.4301) with vulcanised EPDM Drill point and lead thread section Case hardened, special carbon steel Coloured fasteners available Coloured fasteners available (fastener head and washer) HD headform / drive Hexagon 8 mm irius Ø 12 mm Tools and accessories ASCS 6.3 18V FEIN Socket E480 Socket E420 9 Lightweight battery screw gun with depth locator for installing self drilling, self piercing and self tapping fasteners. The E480 setting tool is recommended for installing self drilling fasteners with the hexagon head 8 mm. The E420 setting tool is required for installing self drilling fasteners with the irius head. 9. 2

Fastening to steel and timber structure Stainless steel self drilling fasteners SX3 / SX5 / SX14 Order information d Hexagon 8 mm irius Ø 12 mm Coloured fasteners available *Different washers available KL L Ø 12-16 mm for cladding Ø 19 mm for roofing Ø 29 mm for rooflight VD max. penetration KL clamping length HD headform / drive W washer material and diameter d thread diameter L Length t thickness of structure All measures in mm Order code SX 3/ 9- L12- S16-6,0x 29 Application Product Approval Type VD KL HD W* d L KL Application information Stainless steel SX 3/ 9- L12- S16-6,0x 29 9 VD t Stainless steel 10 ETA-10/0198 10 ETA-10/0198 SX 3/ 9- S16-6,0x 29 9** VD max. steel: 3,0 mm t min. steel: 2 x 0,63 mm t max. steel: 2,5 mm t min. alu: 1,0 mm Stainless steel SX SX 5/ 5/ 8-12- S16-5,5x S16-5,5x 31 35 8** 12** t VD VD max. steel: 5,0 mm t min. steel: 1,5 mm 10 ETA-10/0198 t max. steel: 4,0 mm t min. alu: 2,0 mm Stainless steel SX SX 14/ 12-14/ 20- S16-5,5x S16-5,5x 40 48 12** 20 t VD VD max. steel: 14,0 mm 10 ETA-10/0198 t min. steel: 4,0 mm t min. alu: 5,0 mm 9 ** AISI 316, A4 European Standard 1.4401 products available ex stock. Other lengths on demand. 9. 3

Carbon steel self drilling fasteners Fastening to steel and timber structure SD6-H15 / SD14-H15 / SD6 / SD14 SD6-H15 / SD14-H15 / SD6 / SD14 Technical information Application Fastening structural metal deck to steel structure. Material Fastener SD6-H15 / SD14-H15 Plated carbon steel, case hardened 15 mm diameter flange head SD6 / SD14 Plated carbon steel, case hardened Washer T = Steel zinc plated with vulcanised EPDM Coloured fasteners available Coloured fasteners available (fastener head and washer) HD headform / drive Hexagon 8 mm Tools and accessories ASCS 6.3 18V FEIN Socket E480 9 Lightweight battery screw gun with depth locator for installing self drilling, self piercing and self tapping fasteners. The E480 setting tool is recommended for installing self drilling fasteners with the hexagon head 8 mm. 9. 4

Fastening to steel and timber structure Carbon steel self drilling fasteners SD6-H15 / SD14-H15 / SD6 / SD14 Order information d Hexagon 8 mm Coloured fasteners available *Different washers available KL L Ø 12-16 mm for cladding Ø 19 mm for roofing Ø 29 mm for rooflight VD max. penetration KL clamping length HD headform / drive W washer material and diameter d thread diameter L Length t thickness of structure All measures in mm Order code SD 6- H15-5,5x 22 Application Product Approval Type VD HD W* d L KL Application information Carbon steel 10 ETA-10/0198 SD SD 6- H15-6- H15-5,5x 5,5x 22 25 10 13 t VD VD max. steel: 6,0 mm t min. steel: 1,5 mm Carbon steel 10 ETA-10/0198 SD 14- H15-5,5x 34 14 t VD VD max. steel: 14,0 mm t min. steel: 4,0 mm Carbon steel SD 6- T16-5,5x 28 13 10 ETA-10/0198 t VD VD max. steel: 6,0 mm t min. steel: 1,5 mm Carbon steel SD 14- T16-5,5x 34 11 10 ETA-10/0198 t VD VD max. steel: 14,0 mm t min. steel: 4,0 mm 9 9. 5

Self drilling fasteners Fastening to steel and timber structure SXW / SW3-T / SW3-T-H15 SXW / SW3-T / SW3-T-H15 Technical information Application Stainless steel fastening of steel or aluminium sheets to timber structure. Material Fastener SXW Austenitic stainless steel, grade AISI 304 (European Standard 1.4301) SW3-T Plated carbon steel, case hardened SW3-T-H15 Plated carbon steel, case hardened 15 mm diameter flange head Washer S = Stainless steel, grade AISI 304 (European Standard 1.4301) with vulcanised EPDM T = Steel zinc plated with vulcanised EPDM Drill point and lead thread section Case hardened, special carbon steel Coloured fasteners available Coloured fasteners available (fastener head and washer) HD headform / drive Hexagon 8 mm Tools and accessories ASCS 6.3 18V FEIN Socket E480 9 Lightweight battery screw gun with depth locator for installing self drilling, self piercing and self tapping fasteners. The E480 setting tool is recommended for installing self drilling fasteners with the hexagon head 8 mm. 9. 6

Fastening to steel and timber structure Self drilling fasteners SXW / SW3-T / SW3-T-H15 Order information d Hexagon 8 mm Coloured fasteners available *Different washers available KL L Ø 12-16 mm for cladding Ø 19 mm for roofing Ø 29 mm for rooflight VD max. penetration KL clamping length HD headform / drive W washer material and diameter d thread diameter L Length t thickness of structure All measures in mm Order code SXW- S16-6,5x 52 Application Product Approval Type HD W* d L KL Application information Stainless steel 10 ETA-10/0198 SXW- S16-6,5x 52 VD max. steel: 2 x 1,0 mm Carbon steel SW3-T- T16-6,5x 50 10 ETA-10/0198 VD max. steel: 2 x 1,25 mm Carbon steel SW3-T- H15-6,5x 50 10 ETA-10/0198 VD max. steel: 2 x 1,25 mm 9 9. 7

Fastening to steel and timber structure The SL self drilling fastener range, specially developed for fixing one metal profile to another, offers decisive advantages in usage and durability. Incorrect insertion virtually eliminated 100% functionality from start to finish EPDM washers ensure effective sealing Ergonomic working with the Quik Drive installation tool Increased productivity thanks to magazine-fed fasteners = time is money! 9 These special fasteners designed specifically for thin overlapping profiles offer a range of benefits. The optimum clamping strength results from careful matching of the tip to the thread diameter. Moreover, the special under-head design inhibits over-torquing as well as self-loosening under dynamic load. Any unevenness in the set is smoothed out by the special soft EPDM sealing washer. So the bond is always safe and secure. Even working on the roof, a simple extension attached to the Quik Drive insertion tool is all that is required to maintain a standing position. And using magazinefed fasteners really speeds up the whole process. It s always better to be on the safe side, and with the new no-drill edge strip fixings from SFS intec, you can enjoy a quick and easy insertion, coupled with complete security. The super-sharp penetrating point enables non-slip assembly, with no scratches Improved double thread provides high-speed insertion Optimised hexagon head ensures firm, secure drilling guidance Non-return stop inhibits even longterm safety Thread-free zone for maximum clamping force Super-sharp penetrating point enters without swarf, eliminating the risk of rust 9. 8

Fastening to steel and timber structure Self drilling fasteners SLG-S / SL2-S / SL2-T / SLG-T / SL2 / SL2-H15 / SL3-H15 SLG-S / SL2-S / SL2-T / SLG-T / SL2 / SL2-H15 / SL3-H15 Technical information Application Stainless steel fastening of side laps and flashings. The thread-free zone under the fastener head prevents stripping of the threads in the sheets. The sheets are pulled together tightly, clamped in the thread-free zone and sealed. The fasteners can be used without depth locator or torque control. Material Fastener SLG-S / SL2-S Austenitic stainless steel, grade AISI 304 (European Standard 1.4301) or grade AISI 316 (European Standard 1.4401) on request SL2-T / SLG-T / SL2 Plated carbon steel, case hardened SL2-H15 / SL3-H15 Plated carbon steel, case hardened 15 mm diameter flange head Washer S = Stainless steel, grade AISI 304 (European Standard 1.4301) with vulcanised EPDM A = Aluminium with vulcanised EPDM Drill point and lead thread section Case hardened, special carbon steel Coloured fasteners available Coloured fasteners available (fastener head and washer) HD headform / drive Hexagon 8 mm Tools and accessories ASCS 6.3 18V FEIN Socket E480 9 Lightweight battery screw gun with depth locator for installing self drilling, self piercing and self tapping fasteners. The E480 setting tool is recommended for installing self drilling fasteners with the hexagon head 8 mm. 9. 9

Self drilling fasteners Fastening to steel and timber structure SLG-S / SL2-S / SL2-T / SLG-T / SL2 / SL2-H15 / SL3-H15 Order information d Hexagon 8 mm Coloured fasteners KL available L VD max. penetration KL clamping length HD headform / drive W washer material and diameter d thread diameter L Length t thickness of structure All measures in mm Order code SLG-S- S14-20 Application Product Approval Type HD W* d L KL Application information Stainless steel SLG-S- S14-20 10 ETA-10/0198 VD max. steel: 2 x 0,9 mm t min. steel: 2 x 0,4 mm Stainless steel 10 ETA-10/0198 SL2-S- S14-5,5x 25 ** VD max. steel: 2,0-2 x 1,0 mm t min. steel: 2 x 0,4 mm Carbon steel SL2-T- A14-20 10 ETA-10/0198 Carbon steel SLG-T- A14-20 10 ETA-10/0198 VD max. steel: 2 x 1,0 mm t min. steel: 2 x 0,4 mm VD max. steel: 2 x 0,9 mm t min. steel: 2 x 0,4 mm Carbon steel SL2-20 VD max. steel: 2 x 1,0 mm 9 Carbon steel 10 ETA-10/0198 SL2- H15-20 t min. steel: 2 x 0,6 mm VD max. steel: 2 x 1,0 mm 10 ETA-10/0198 For high shear load t min. steel: 2 x 0,6 mm Carbon steel SL3- H15-32 VD max. steel: 2 x 1,5 mm 10 ETA-10/0198 For high shear load t min. steel: 2 x 1,1 mm ** AISI 316, A4 European Standard 1.4401 products available ex stock. Other lengths on demand. 9. 10

Tools and accessories 10ofast Product code Page Steel deck IF240-B / IF240 10.2 IF80-L IF80-S 10.3 IC120 10.4 Concrete deck ZD15 / DP11 10.5 SD S 10.6 Timber deck Critical decks Accessories MV 28-500 / MV28-750 10.8 IP 50-B / TAUUS 2 Peel ivet 10.9 HS S 10.10 ASCS 6.3 18V FEIN 10.15 isotak Product code Page Steel and timber deck Concrete dec k IT260-B / IT260 10.1 1 IT19 10.12 ZVK / ZAK 10.13 10.14 Accessories DT-M-500 / DT-M-750 AJ 60x130-TIA / AJ-M6 ZA1/ 1/4 4 -M6-3 -300 ZA1/ 4 -M6-7 -750 ZA1/4 -M6-EXT1 T100 ZH-11-ING Variou ous in sert bits ZD-1000 / ZDM-1000 Waist bag 10.14 10.14 isoweld isoweld field fastening system Product code Page isowel d 3000 10.16 FI -H / FI-Magnet Set 10.17 FI80 80-L / FI8 I80- S 10.18 FI80-T19 10.19 10 10. 1

Setting tool Steel and timber deck Tools and accessories IF240-B / IF240 IF240-B New: Battery version! IF240 Application Automated setting tool for the fast and economic installation of belted isofast fasteners and stress plates. Battery and cable version available. Fasteners Diameter: Length: Belt 4,8 mm and 6,0 mm 60 mm to 240 mm Fasteners 60-160 mm: 75 pcs per belt Fastener 180-240 mm: 100 pcs per belt Technical details IF240-B Battery tool: Battery: No load speed: Power supply: Hight: Width: Weight: New: Battery version! ASCS 6,3 18V FEIN 18 V, 5,0 Ah 0-1500 1/min. 230 V 1100 mm (working length 415 mm (across rollers) 34 kg Technical details IF240 10 Power tool: Wattage: No load speed: Power supply: Height: Width: Weight: DI650 650 W 0-2000 1/min. 110 V / 230 V 1100 mm (working length) 415 mm (across rollers) 31 kg Accessories Transport case Waterproof cover Socket E320 (8 mm hex) Spray lubricant 10. 2

Tools and accessories Setting tool Steel and timber deck IF80-L / IF80-S IF80-L Application Stand-up setting tool for the installation of isofast fasteners and stress plates. Fastener assembly may be undertaken on site if necessary. Fasteners Diameter: Length: 4,8 mm 60 mm to 300 mm Technical details Power tool: Wattage: No load speed: Power supply: Height: Weight: DI650 650 W 0-2000 1/min. 110 V / 230 V 750 mm 2,5 kg IF80-S Application Stand-up setting tool for the installation of isofast fasteners and stress plates. Fastener assembly may be undertaken on site if necessary. Fasteners Diameter: Length: 4,8 mm 60 mm to 300 mm Technical details Power tool: Wattage: No load speed: Power supply: Height: Weight: DI650 650 W 0-2000 1/min. 110 V / 230 V 470 mm 2,0 kg 10 10. 3

Setting tool Concrete deck Tools and accessories IC120 IC120 Application Automated setting tool for the fast and economic installation of belted impact anchors DT(-S)-4,8 and stress plates. Fasteners Diameter: Length: Max. build-up: 4,8 mm, belted at 50 pcs per belt 60 mm to 152 mm 127 mm Technical details Power tool: Wattage: Load speed: Power supply: Height: Width: Weight: Hammer drill 850 W 0-900 1/min. 110 V / 230 V 1100 mm 500 mm 57 kg Accessories Transport case Spray lubricant 10 10. 4

Tools and accessories Setting tool Concrete deck ZD15 / DP11 ZD15 / DP11 ZD15 DP11 Setting tool for the installation of DT impact anchor Setting tool for the installation of DT impact anchor with a hammer drill 10 10. 5

Accessories Concrete deck Tools and accessories SDS Order information L F SP Carbide-geometry Dynamic, chisel-shaped drill bit head Multi-fluted, spacious KVS-spiral Unique KVS-flute design d diameter L Length F working length All measures in mm Order code SDS- 110/ 50- SP Type d L F Code Application information 5,0x 5,0x 5,0x 5,0x 5,0x 5,0x 5,0x 5,0x 5,0x 5,2x 5,2x 5,2x 5,2x 5,2x 110/ 160/ 210/ 260/ 310/ 360/ 110/ 160/ 210/ 260/ 310/ 360/ 400/ 450/ 500/ 160/ 210/ 260/ 310/ 360/ SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- 50-100- 150-200- 250-300- 50-100- 150-200- 250-300- 340-390- 440- SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP Impact anchor DT-L Impact anchor DT-S-L TI-L* TI-T25-L* TIA-T25-L* TI-L TI-T25-L TIA-T25-L TI-L* TI-T25-L* TIA-T25-L* 110/ 160/ 210/ 260/ 285/ 360/ 410/ 510/ 100-150- 200-250- 300- SDS- SDS- SDS- SDS- SDS- SDS- SDS- SDS- 50-100- 150-200- 225-300- 350-450- SP SP SP SP SP SP SP SP N-L Impact anchor DT-L Impact anchor DT-S-L 10 All approvals and recommended design values are based upon close tolerance pilot holes that are drilled using SFS intec SP carbide drill bits. * Technical performance values of the TI fasteners may differ between countries due to variation in the hardness of locally sourced concrete aggregates. Optimum performance can be determined by site testing using different drill diameters, for example between SDS-4,8 and SDS-5,2. Consult your SFS representative for further information. 10. 6

Tools and accessories Accessories Concrete deck SDS Order information L F 4C One piece tip element with optimal 4x90 carbide cutting symmetry for long lifetime when hitting reinforcing steel. Four flute ridges with increased flute pitch provide fast transporting of drilling debris. d diameter L Length F working length All measures in mm Order code SDS- 210/ 150-4C Type d L F Code Application information 210/ 310/ 4C 4C Impact anchor DT-L Impact anchor DT-S-L TI-L* TI-T25-L* TIA-T25-L* 5,0x 210/ 5,0x 310/ 210/ 310/ SDS- SDS- 150-250- SDS- SDS- 150-250- SDS- SDS- 150-250- 4C 4C 4C 4C 4 cutter drill bit 4C for reinforced concrete 4 cutter drill bit 4C for reinforced concrete TI-L TI-T25-L TIA-T25-L 4 cutter drill bit 4C for reinforced concrete 4 cutter drill bit 4C for reinforced concrete N-L Impact anchor DT-L Impact anchor DT-S-L 4 cutter drill bit 4C for reinforced concrete 4 cutter drill bit 4C for reinforced concrete All approvals and recommended design values are based upon close tolerance pilot holes that are drilled using SFS intec 4C carbide drill bits. * Technical performance values of the TI fasteners may differ between countries due to variation in the hardness of locally sourced concrete aggregates. Optimum performance can be determined by site testing using different drill diameters, for example between SDS-4,8 and SDS-5,0. Consult your SFS representative for further information. 10 10. 7

Setting tool Timber deck Tools and accessories MV28-500 / MV28-750 MV28-500 Application For the application of pre-assembled IWF-T-B40-5,2 fasteners and stress plates. The MV28-500 setting tool offers ergonomic benefits to the installer by way of an upright setting procedure for the attachment of membrane directly to timber decking. MV28-750 Application For the application of pre-assembled IWF-T-B40-5,2 fasteners and stress plates. The MV28-750 setting tool offers ergonomic benefits to the installer by way of an upright setting procedure for the attachment of membrane directly to timber decking. 10 Accessories H2-32-M6 Bit for setting tool 10. 8

Tools and accessories Setting tool Critical decks IP50-B / TAUUS 2 Peel ivet IP50-B Application Battery setting tool for the installation of TP-L Peel ivets. Technical details Power tool: Battery: No load speed: Power supply: Stroke: Height: Weight: ASCS 6,3 18V FEIN 18 V, 5,0 Ah 0-500 1/min. 230 V 50 mm 530 mm 3,3 kg TAUUS 2 Peel ivet Application Pneumatic-hydraulic setting tool for the installation of TP-L Peel ivets. Specially developed for TP-L Peel ivets. Equipment Maintenance wrench SW12/14, SW14/17 1 hydraulic oil bottle 100 ml, 1 oil refil can Technical details Air connection Ø: 6 mm (1/4 ) equired air pressure: 5-7 bar Traction power: 7 000 N Stroke: Weight: 24 mm 1,6 kg 10 Accessories Extension unit for TAUUS 2 100 mm 10. 9

Accessories Critical decks Tools and accessories HSS Order information d L f d diameter L Length f flute length All measures in mm Order code HSS- 7,0x 109/ 69 Type d L f Application information HSS- HSS- HSS- HSS- HSS- 7,0x 7,0x 7,0x 7,0x 7,0x 109/ 156/ 225/ 290/ 370/ 69 102 155 200 250 For steel or aluminium. 10 10. 10

Tools and accessories Setting tool Steel and timber deck IT260-B / IT260 IT260-B IT260 New: Battery version! Application Automated setting tool for the fast, secure and economic installation of the isotak fasteners and sleeves. Battery and cable version available. Technical details IT260-B Battery tool: Battery: No load speed: Power supply: Height: Width: Weight: ASCS 6,3 18V FEIN 18 V, 5,0 Ah 0-1500 1/min. 230 V 1100 mm (working length) 415 mm (across rollers) 34,5 kg New: Battery version! Technical details IT260 Power tool: Wattage: No load speed: Power supply: Height: Width: Weight: DI650 650 W 0-2000 1/min. 110 V / 230 V 1100 mm (working length) 415 mm (across rollers) 30,5 kg 10 10. 11

Setting tool Steel and timber deck Tools and accessories IT19 IT19 Application Stand-up setting tool for the installation of isotak fasteners and sleeves. Technical details Power tool: Wattage: No load speed: Power supply: Height: Weight: DI650 650 W 0-2000 1/min. 110 V / 230 V 900 mm 2,7 kg 10 10. 12

Tools and accessories Accessories Concrete deck ZVK / ZAK Order information ZVK-STOP ZVK L F L F d diameter L Length F working length All measures in mm Order code ZVK- 100x160 Type d L F Code Application information 100x 100x 160 165 STOP Impact anchor DT-L Impact anchor DT-S-L TI-T25-L* TIA-T25-L* ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- ZVK- 5,0x 55x 5,0x 100x 5,0x 25x 5,0x 35x 5,0x 5,0x 55x 5,2x 25x 5,2x 35x 5,2x 5,2x 100x 115 160 90 100 110 120 90 100 110 165 STOP STOP STOP STOP STOP STOP STOP STOP TI-T25-L TIA-T25-L TI-T25-L* TIA-T25-L* ZVK-STOP: The special STOP drills additionally core out the insulation providing for easy sleeve insertion and accurate fastener alignment with the pilot hole. ZVK: Conus drills for different use, mostly to replace very long SDS drills All approvals and recommended design values are based on close tolerance holes drilled with SFS intec ZVK carbide drill bits. * Technical performance values of the TI fasteners may differ between countries due to variation in the hardness of locally sourced concrete aggregates. Optimum performance can be determined by site testing using different drill diameters, for example between ZVK-4,8 and ZVK-5,2. Consult your SFS representative for further information. ZAK-500 / ZAK-750 / ZAK-1000 - Drill extension for the ZVK conus drills 10 Drill extension for the ZVK conus drills 10. 13

Setting tools and accessories Tools and accessories Setting tools for isotak system Setting tools for sleeve systems DT-M-500 DT-M-750 Mechanical driving tool for the installation of DT impact anchor within the sleeve AJ60x130-TIA Manual sleeve height adjustment tool for the TIA system AJ-M6 Attachment bit for the use with ZA¼ bit extension for the sleeve height adjustment with a drilling tool in the TIA system ZA1/4 -M6-300 ZA1/4 -M6-750 Drive bar for isotak sleeve installation ZA1/4 -M6-EXT100 Drive bar extension for isotak sleeve installation ZH-11-ING H2-32-M6-ING H2-32-M6 Adapter ring that combines with the ZA1/4 -M6-300/750 drive bars and the T25-32-M6 bits to provide grip when installing isotak 45 and 75 sleeves. Insert bit for H2 drive. Provides grip when used with P45, P75 and TPP. Insert bit for H2 drive T25-32-M6-ING T25-32-M6 Insert bit for T25 drive. Provides grip when used with P45, P75 and TPP. Insert bit for T25 drive 10 ZD-1000 ZDM-1000 Penetrating tool for punching a hole in the waterproof membrane prior to the application of an isotak sleeve Tool to fit onto the penetrating tool to provide two holes for accommodation of the isotak TPP/ TPS sleeves Waist bag Waist bag for various use 10. 14

Tools and accessories Setting tool ASCS 6.3 18V FEIN ASCS 6.3 18V FEIN Application Lightweight battery screw gun with depth locator for installing self drilling, self piercing and self tapping fasteners. Technical details Power tool: Battery: No load speed: Power supply: Weight: ASCS 6,3 18V FEIN 18 V, 5,0 Ah 0-1500 1/min. 230 V 2,4 kg 10 10. 15

Setting tool Tools and accessories isoweld 3000 isoweld 3000 Application High-tech induction tool for the welding of the membrane to the field fastening stress plate. Easy, user-friendly and ergonomic working. Integrated security functions: search and control function, temperature compensation, power compensation, etc. Technical details Power tool: isoweld 3000 Wattage: 3000 W Height: 82 cm Width: 58 cm Depth: 49 cm Weight: 20 kg (tool) 38 kg (tool and case) Accessories Transport case (24 x 33 x 89 cm) Calibration template Operating instructions Installation instructions Suction cup 10 10. 16

Tools and accessories Setting tool FI-H / FI-Magnet Set FI-H hand inductor Application Hand inductor for working in narrow areas or on verticals. Must be plugged in at the isoweld 3000 induction tool. With the same functions as the isoweld 3000 induction tool. Technical details Height: Diameter: Cable length: Weight: 13,5 cm 11 cm 4 m 2,2 kg FI-Magnet Set Application Magnets for the isoweld system. Have to be applied for at least one minute directly after the welding process. Available as a set of 10 magnets or as a single magnet. Stick is removable for the working with the hand inductor FI-H. Technical details Single magnet Height with stick: 1 m Height without stick: 18 cm Weight: 1,35 kg Magnet set (incl. case) Height: 24 cm Width: 33 cm Length: 89 cm Weight: 13,5 kg (10 magnets) 27,0 kg (10 magnets and case) 10 10. 17

Setting tool Steel and timber deck Tools and accessories FI80-L / FI80-S FI80-L Application Stand-up setting tool for the installation of isoweld fasteners and stress plates Technical details Power tool: Wattage: No load speed: Power supply: Height: Weight: DI650 650 W 0-2000 1/min. 110 V / 230 V 750 mm 4,0 kg FI80-S 10 Application Stand-up setting tool for the installation of isoweld fasteners and stress plates Technical details Power tool: Wattage: No load speed: Power supply: Height: Weight: DI650 650 W 0-2000 1/min. 110 V / 230 V 470 mm 3,0 kg 10. 18

Tools and accessories Setting tool Steel and timber deck FI80-T19 FI80-T19 Application Stand-up setting tool for the installation of isoweld fasteners, stress plates and sleeves Technical details Power tool: Wattage: No load speed: Power supply: Height: Weight: DI650 650 W 0-2000 1/min. 110 V / 230 V 730 mm 3,8 kg 10 10. 19

Services Page Services 11.1 11 11.1

Services Economy and security built in: Complete systems covering every application. 11 More than just fastening systems We work hand-in-hand with planners and specifiers everyday on sites around the world. This is the driver behind our constantly evolving products and services. The diverse messages coming in from the market place are converted by our design and development specialists into profitable solutions for our customers. We can offer more than just top class fasteners. Things like application-specific installation tools featuring automatic feeds, over-torque limiters and working security features. What a difference it makes working in an upright, ergonomic posture: fatigue-free from the first insertion to the last. And with each and every fastener installed properly, the correct functioning of the joint is guaranteed for the lifetime of the building. Complete systems from SFS intec are outstanding due to: Perfectly matched installation equipment and accessories for fast, efficient assembly Simple, ergonomic working Tried and tested long-term viability Approved for the most diverse applications A comprehensive range to meet every application In-house development department 11.2

Services eliable performance: Tested in-house, confirmed on site. SFS intec fastening systems are checked for: Long-term behaviour under static and dynamic loading Corrosion resistance Ease-of-use and perfect functioning on site Fulfilment of approval authority requirements Continuous production controls Future-focused fastening systems Are the fasteners up to the anticipated static and dynamic loads? Is the fastener seal secure for life? Will wind forces be safely transmitted to the sub-structure? Such questions confront SFS intec experts day by day. New solutions are extensively tested in our own in-house laboratories to see how they will perform in practice. One key aspect lies in meeting the requirements of a diverse range of approval authorities. Working hand-in-glove with leading manufacturers of roofing systems, structural components and insulation systems, whilst carrying out our own primary research, we at SFS intec have spearheaded numerous trends in modern fastener development. 11 11.3

Services Accredited security: New wind uplift test facility UNIQUE! Fully accredited wind load testing Wind uplift testing according to ETAG 006 For more than 30 years SFS intec has been undertaking research and development on flat roofing systems using its in-house wind uplift test facility. This has now been replaced by a brand new facility, which offers special features and includes the latest advanced technology. Key features of the new wind uplift test facility: Fully accredited wind load testing Optimised facility size Latest technology allows for precise, step-less, flexible control settings Comprehensive documentation 11 The wind uplift test facility enables testing to be undertaken in full accordance with the requirements of European Technical Approval Guideline ETAG 006 and European Standard EN 16002. Since October 2015 test procedures have been fully accredited by the Swiss Accreditation Service SAS (STS 0545). This ensures the quality and security of each and every fastening system tested. 11.4

Services Increased safety for flat roofing: Precise wind load calculations Your benefits at a glance: Accurate wind load calculations Clear, user-friendly written reports containing all relevant details eports available in the language of the country concerned or in a range of languages Calculation based on Eurocode 1, EN 1991-1-4 or FM Data allied to country-specific national appendices of EN 1991-1-4 Country-specific wind load calculations SFS intec offers fully tested and approved mechanical fastening systems for flat roofs to provide security and peace of mind for the customer. These products are further enhanced by a complete range of support services. Service support includes detailed wind load calculations where projectspecific data are entered into our advanced planning software. This determines not only the number of fixings to be used, but also their exact positioning on the flat roof. Calculations are specific to each country, its relevant standards and local regulations and directives. The customer receives a complete, precise roofing layout and plan, together with the data on which it is based. 11 11.5

Services The right fastening system every time: Technical advice and support any time, anywhere. Absolute fastener security Increased safety requirements; economic, ergonomic and aesthetic considerations; meeting the relevant directives and building control guidelines: these and other factors are becoming increasingly important in industrial construction. Services ensuring a secure build: Choosing the appropriate fastening system at the planning stage Comprehensive analysis of your needs including on-site tests Optimum supply chain management from plant to site On-site personnel training That s why choosing the right fastening system for each specific application is vital. We ensure specifiers, architects and installers have the advice and information needed to choose an appropriate system from the wide range of alternatives available. 11 Your support team is only a phone call away. Our comprehensive website www.sfsintec.biz provides a wealth of information on optimum fastener technology. Draw on our years of experience in every aspect of fastening and fixing to put you in the driving seat when it comes to industrial building. 11.6

Services The secure route to the right fastener solution: Simple, efficient planning aids at every step of the project. Choose the planning aids you need: User-friendly catalogues On-site or office advice Application technicians available by phone 24/7 online eshop ordering Talking to the specialists in fastener and fixing technology Whatever phase your project is at, SFS intec offers you the right planning aids to determine the appropriate fastener and the matching accessories. That might be a specific application not mentioned in our catalogue. Whether it s a new build or renovation, our experts are here to offer fast, efficient help in choosing the right system for you; with no complications. Solutions are always matched to the specific requirements of the individual project, providing you with longevity, functionality, long-term security and real aesthetic appeal. 11 11.7

Services Partners who really understand you: Experts for architectural exteriors. 4 6 5 3 9 1 8 7 2 Comprehensive application knowledge from one partner For every aspect of architectural exteriors - from fixings to special hinges for doors and windows SFS intec understands your business. We help make our global customer base more competitive. Experienced sector specialists tuned to the regional requirements of each individual market guarantee genuine local advice and support. 1 Fastening cassette systems 5 Fastening flat roofs 11 Take advantage of our expertise: More than 50 years experience Technical application professionals available for on-site support Know-how database from research, development, manufacturing and application engineering 11.8 2 Fastening composite panels 6 Perimeter zones 4 3 Ventilated curtain walling Structural timber and glulam beams 8 7 Post-and-rail joints 9 Hinge systems for doors and windows Fastening systems for doors and windows

Services Always one step ahead: An international network with local knowledge in every field. The services that can improve your competitive edge: Local site support on projects outside your home market Years of experience on numerous international projects In-depth knowledge gained from our work with the world s leading OEMs People on site who speak your language, offering an international approach Tried and trusted technologies matched to your specific requirements Somewhere in the world we will have already addressed the same tasks confronting you right now. Our global team of experts is continuously working on new challenges which means our customers benefit from a massive pool of accumulated knowledge. So they are always one step ahead. With your specific requirements in our hands, we exchange know-how among a vast international network of industry specialists, seeking out the right fastener solutions for you. Solutions to make your work easier and to help your business be more competitive. 11 11.9

Services Quality you can depend on: A network of quality-certified plants. Assured quality fast delivery We never compromise when it comes to our application-optimised fasteners. Our trained specialists throughout the value-added chain are there to ensure quality in every aspect of our products and services. Every SFS intec site has its own accreditation to ISO 9001 quality management standard. Moreover, a complete network of manufacturing and logistics support centres means maximum product availability. SFS intec business partners profit from: Certified quality from our own production plants Fast, efficient product availability from an international manufacturing and logistics network Flexible responses to individual needs that only the original manufacturer can truly provide 11 11.10

Services Focused market activities for a wide range of industries: Generating customer benefits as a joint corporate objective. Construction Mechanical fastening systems and fixing technologies with system accessories for light industrial builds, bolt-on rear ventilated facades, flat roofing and timber engineering Mechanical fastening systems and Hinge technology for doors and windows Engineered Components Development and production partner for precision engineered components and special fasteners for suppliers to the automotive and electronics industry Development and production partner for precision engineered components and special fasteners for aircraft industry, medical technology and cutting tool fasteners 11 11.11

Business Solutions 11 11.12

Business Solutions Business Solutions by SFS intec: Individual solutions tailored to your needs. We live in a complex, constantly changing business environment which presents us with numerous challenges in our day-to-day work. Simple, lean processes, enhancing efficiency and not least cost and time savings are important themes. SFS intec is a committed partner, adopting a holistic approach and not merely supplying products. Our efforts are directed towards successfully addressing the challenges arising in day-to-day business with tailor-made supplementary services. Our thoughtfully devised portfolio of solutions is adapted to the differing requirements of market participants. Whether for small and medium-sized businesses, industrial customers, dealers or system manufacturers: Business Solutions by SFS intec cater to a wide diversity of needs. Furthermore, they are designed in such a way that they can be adapted individually to your specific requirements. Business Solutions by SFS intec offer you the following benefits: Easy Simple ordering process Information in real time eduction of process steps Secure Information transparency Controlled supply chain processes Many years of experience in supply chain management Cost-saving apid, efficient ordering Optimised inventory Construction site services Time-saving Faster order input and processing Outsourcing of process steps Electronic data interchange Take as well advantage of the benefits of our Business Solutions and be further informed in a personal meeting. 11 11.13

Business Solutions Electronic ordering: Fast, simple, faultless. elogistics More profit due to process cost reduction! Self-ordering logistics systems for state-of-the-art C-parts management. Straightforward processes Lower cost and more time for value creation Absoulte reliability of supply eshop Order quickly and easily online! Website for online orders round the clock. Order quickly and easily Irrespective of time and place Important information at a glance (e.g. product range, previous orders, invoices) escan Simplify your stock management! Electronic ordering using a barcode scanner. Optimal inventory organisation and efficient ordering, including analysis and consultancy by SFS intec Lower procurement costs Fast, efficient ordering EDI Stay connected constantly! 11 Electronic data interchange between the customer s EP system and SFS intec s. Continuous link Fast, simple process No transmission errors 11.14

Business Solutions Electronic information: Always up-to-date. epost eceive your documents immediately! Electronic mailing of order acknowledgment, delivery note and invoice. eal-time information Information transmitted directly to the person responsible Paperless filing possible eportal Information at your fingertips! Orders and all related documents accessible at all times, including real-time delivery status and delivery confirmation. Full transparency Information available at any time and place Accessibility for several defined users 11 11.15

Business Solutions Our construction site service: Higher on-site efficiency. SMS Service Delivering confidence! Notification and confirmation of deliveries to the construction site via SMS. High degree of transparency regarding deliveries No more missed deliveries Less time-wasting, no standstills on the construction site Job2Job Save costs, improve efficiency! You order per job, we do the rest: storage, order picking, packaging, labelling, forwarding. Major cost savings in procurement educed inventories Greater convenience epullout Profit from an online management platform! equest and reporting of pullout tests handled with an online management platform. Smooth and transparent process, data transparency Faster process as data are entered directly on site and available immediately Additional material: roof plan, pictures of the roof 11 Business Solutions by SFS intec: We d be glad to give you more information! Are you interested in knowing more about Business Solutions by SFS intec? Don t hesitate to contact your customer relationship manager. He ll be pleased to organise a visit to you together with one of our Business Solutions experts! 11.16

Attachment 2 12 12.1