Client Project name Order# Qty Type FEATURES AND BENEFITS Physical : Low copper content high pressure die-cast aluminum housing Heavy aluminum formed yoke Stainless steel hardware Silicone sealing devices Clear tempered glass Dual chamber design for heat management and ease of maintenance Electro-statically applied polyester powder coat finish 2.40 kg / 5.20 lbs EPA: Front = 0.35 sq.ft./0.033 m.sq. Side= 0.3 sq.ft/0.029 m.sq. IP66 IK07 rated Corrosion-resistant coating for hostile environments* Performance : CERTIFICADO No.054, 055 RETILAP Minimum fc (0.7 lux) @ 33 feet (40m) distance (RGB full white, 6 optic) 453 delivered lumens and 7,790 candelas at nadir (RGB full white, 6 optic) 6, 0, 20, 40, 60, Elliptical distribution on 0 to 40 optics Lumen maintenance 20,000 hrs [L70 @ 25 C] Operating temperatures: -25 C to 50 C [-3F to 22F] IK07 Electrical : Line voltage luminaire for 00 to 277V Power and data in cable, 3ft/m cord (#-5) 4 watts DMX/RDM enabled 4 5 [mm] 0 5 7 [3mm] 5 5 [35mm] 75 3 [23mm] 90 Standard Yoke Mounting (as shown, included) 40 * Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! / Copyright Lumenpulse 20 26/AL/20 Consult
MOUNTING OPTIONS 2 [3mm] 3 [23mm] 5 [mm] 7 [mm] Standard Yoke Mounting (as shown, included) Standard Yoke Mounting holes pattern 9 4 [236mm] 7 [434mm] SK Stake 9 5 [245mm] KN Knuckle Suitable for /2, 3/4 and pipe diameter 2/ Copyright Lumenpulse 20 26/AL/20 Consult
MOUNTING OPTIONS - continued lumenbeam 4 [6mm] 3 2 [9mm] TOP VIEW Mounting base screw hole pattern 0 [254mm] RIGHT VIEW FRONT VIEW CN Canopy Cover Suitable for standard round junction boxes surface mounted OPTICAL OPTIONS *Factory installed LSLH Linear Spread Lens Horizontal distribution (not adjustable on site) LSLV Linear Spread Lens Vertical distribution (not adjustable on site) Factory installed, available for 6 to 40 optics. See Optical Accessories for field adjustable spread lens. 3/ 26/AL/20 Copyright Lumenpulse 20 Consult
ACCESSORIES Order separately Mounting Accessories PM4-, PM4.5-, PM5- Round Pole Mounting accessory single fixture 9 3 [345mm] 3 [mm] 5 5 [6mm] PM4-2, PM4.5-2, PM5-2 Round Pole Mounting accessory twin fixtures 3 2 [55mm] 7 PM4 Round Pole Mounting Accessory Shown *Consult factory for square pole section When PM4-2, PM4.5-2 or PM5-2 are specified, one bracket assembly is supplied per 2 fixtures unless otherwise specified. 5 3 [00mm] TN2 Tenon Adapter to fit on 2 3/ O.D. tenon 7 5 [49mm] 2 2 [63mm] 5 [00mm] 3 TN4 Tenon adapter to fit on 4 O.D. tenon 4/ Copyright Lumenpulse 20 26/AL/20 7 5 [49mm] [05mm] 4 Consult
ACCESSORIES - continued Order separately Optical Accessories: LBS-SN- -BK Snoot accessory. Please specify desired exterior finish from the list below. Interior surface painted black. LBS-VS- -BK Visor accessory. Please specify desired exterior finish from the list below. Interior surface painted black. LBS-WG- Wire Guard accessory. Please specify desired exterior finish from the list below. LBS-LSLA- Linear Spread Lens Adjustable accessory. Please specify desired exterior finish from the list below. Available finishes: BK - Black Sandtex BRZ - Bronze Sandtex SI - Silver Sandtex WH - Smooth white, low gloss BKTX - Textured black BRZTX - Textured bronze, non-metallic GRATX - Textured medium gray GRNTX - Textured green WHTX - Textured white CC - Custom color and finish (please specify RAL color) Accessory combinations: + Snoot Visor Wire Guard Snoot YES Visor YES Linear Spread Lens Adjustable YES YES Accessory combinations must be ordered together on a single line. Ex: A Snoot + Wire Guard combination order code is LBS-SNWG-BK-BK. Notes: North American RAL colors specified with RAL number only are provided with a smooth/high-gloss finish. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary. 5/ Copyright Lumenpulse 20 26/AL/20 Consult
ACCESSORIES - continued Order separately lumenbeam Control Systems: Control Boxes: LTO2 LCU LID LTN CBX Lumentouch is a wall mount DMX 52 controller keypad. Lumencue is a USB / mini SD DMX 52 controller. LumenID is a diagnostic and addressing DMX 52 controller. It must be specifi ed on all DMX applications. Refer to LID specifi cation sheet for details. Lumentone is a simple pre-programmed DMX 52 controller with a push button rotary dial and live feedback. DMX/RDM control box. Up to six power and data outputs to fi xtures or fi xture runs. Ethernet enabled option. Refer to CBX specifi cation sheet for details. 6/ 26/AL/20 Copyright Lumenpulse 20 Consult
TYPICAL WIRING DIAGRAMS Star Layout (DMX/RDM) American Color Code CE Color Code USE Green Black White Red/Purple Orange Yellow/Green Brown Blue Black Grey Ground Live 00-277V Neutral 0-0V / Data + 0-0V / Data - Lumentouch 2.0 #-5 Power & data cable (by others) Data input 00-240V Data out to next CBX (optional, not isolated/not boosted) CBX-ST lumenterminator (use at the end of each run only) Data+ red Data- orange From fixture or CBX 00-277V Maximum run lengths - 5A maximum, AWG cable, 0' [3m] on center spacing Configuration/Voltage To Fixture Line black Ground green Neutral white 20V 20V 240V 277V 0ft from CBX 50ft from CBX Notes: Run length calculations are based on a voltage drop of no more than 25V and a DMX/RDM enabled fixture limit per DMX/RDM run. Consult factory for specific applications and max. cable length recommendations 3 Each fixture requires DMX address. 4 6 outputs max. per CBX-ST, output max. per CBX-DS. Wire-nuts 2 Junction box (by others) DMX terminator is required at the end of each run to maintain data integrity. (2x) DMX lumenterminator included per CBX-DS (6x) DMX lumenterminator included per CBX-ST See installation instructions for details. Daisy Chain Layout (DMX/RDM) 00-277V CBX-DS #-5 Power & data cable (by others) Data out to next CBX (optional, not isolated/ not boosted) Data Lumentouch 2.0 input Data+ red Data- orange lumenterminator (use at the end of each run only) From fixture or CBX To Fixture Line black Ground green Neutral white 00-240V Wire-nuts Junction box (by others) 7/ Copyright Lumenpulse 20 26/AL/20 Consult
HOW TO ORDER lumenbeam LBS RGB DMX/RDM 2 3 4 5 6 7 9 Housing: 2 Voltage: LBS - Lumenbeam Small 00-00 volts 20-20 volts 20-20 volts 3 Colors and Color temperatures: 4 Optic: RGB - Additive red, green and blue VN - Very Narrow 6 NS - Narrow Spot 0 NF - Narrow Flood 20 FL - Flood 40 WFL - Wide Flood 60 220-220 volts 240-240 volts 277-277 volts 6 Finish: BK - Black Sandtex BRZ - Bronze Sandtex SI - Silver Sandtex WH - Smooth white, low gloss BKTX - Textured black BRZTX - Textured bronze, non-metallic GRATX - Textured medium gray GRNTX - Textured green WHTX - Textured white CC - Custom color and finish (please specify RAL color) 2 7 Control: DMX/RDM - DMX/RDM enabled 3 Mounting Option: 9 Option: SK - Stake Mounting KN - Knuckle Mounting CN - Canopy Cover Mounting CRC - Corrosion-resistant coating for hostile environments CE - CE (certification covers European Economic Area) 5 Optical Option: LSLH - Linear Spread Lens Horizontal distribution LSLV - Linear Spread Lens Vertical distribution Notes: Factory installed, available for 6 to 40 optics. See Optical Accessories for field adjustable spread lens. 2 North American RAL colors specified with RAL number only are provided with a smooth/high-gloss finish. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary. 3 3 DMX addresses per fixture. / 26/AL/20 Copyright Lumenpulse 20 Consult