www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS
ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery for the furniture industry. Its modern planning departments are characterized by a constant research for new and innovative solutions, which prove to be long-lasting and which create additional value to the customers. With the help of advanced technology, the search for new materials, the creation of prototypes, innovative ideas and high quality control, ITALIANA FERRAMENTA proposes a specific product range to its customers which gives them the opportunity to be competitive in a unique way. Research and development investments are considered as the most important aspect by the company and they reflect its aim to guarantee its customers, the possibility of using products that have an important characteristic: diversity. AWARDS 2
INTRODUCTION The details make the design. Cabinets and furniture units are essentially carcasses given form, functionality and life. The said functionality is achieved by using precise furniture hardware. There is more to hardware than them being veiled essentials for building efficient furniture. They are those crucial details that shape your entire furniture aesthetics and hence must be chosen wisely. Häfele understands this need for detail and presents to you a diverse range of furniture hardware and accessories by Italiana Ferramenta, an Italian company specializing in the production of high quality accessories and ironmongery for the furniture industry. The new hardware and accessories range enhances the aesthetic of your furniture while silently delivering strength, stability and function to them. It guarantees long-lasting results which create additional value when installed. Häfele s new range of furniture hardware and accessories by Italiana Ferramenta consists of: CONNECTORS Part 1 SHELF SUPPORT Part 2 SHELVING SYSTEMS Part 2 LEVELLERS HANGERS HINGE Part 3 Part 3 Part 4 MAGNETIC CATCH Part 4 DOOR BUFFERS & COVER CAPS Part 4 This communication takes you through the details of Part 3, i.e. The New Ranges of Levellers and Hangers by Italiana Ferramenta. 3
INTEGRATO G 5 INTEGRATO Z 6 ATACAMA J 7-8 L E V E L L E R S 4
INTEGRATO G INTEGRATO G helps align heavy duty wardrobes, bookcases and modular furniture To be installed onto the bottom edge of the side carcass Adjustment to be carried out through a Ø 8 mm hole in the bottom panel by using an allen wrench, a cross screwdriver or a blade screwdriver The Zinc alloy foot is provided with an independent plastic glide for easier adjustment and to prevent scratches on the floor A plastic cover cap can be used to conceal the housing at the bottom Adjustment range : 0-25 mm. Capacity loading: 175 kilos per leveller Material: Zinc Alloy and Plastic Tested according to Italian CATAS INSTITUTE requirements. INTEGRATO G Cover Cap Plinth Clip Euro Bolt Installation INTEGRATO G Adjustments Installation Plinth Clip 637.67.910 045.08.008 283.64.918 020.90.904 5
INTEGRATO Z INTEGRATO Z helps align heavy duty wardrobes, bookcases and modular furniture. It is conceived for units with weight-bearing bottoms. To be installed onto the bottom panel Adjustment to be carried out through a Ø 8 mm hole in the bottom panel by using an allen wrench, a cross screwdriver or a blade screwdriver The Zinc alloy foot is provided with an independent plastic glide for easier adjustment and to prevent scratches on the floor A plastic cover cap can be used to conceal the housing at the bottom Adjustment range : 7 17 mm Capacity loading: 175 kilos per leveller Material: Zinc Alloy and Plastic Tested according to Italian CATAS INSTITUTE requirements INTEGRATO Z Cover Cap Installation Adjustments 651.16.300 045.08.008 6
ATACAMA J ATACAMA J is a leveller integrated with a strong connecting system It is fixed on the furniture bottom through two housings, in order to provide an easier and more stable installation The M6 threaded pin of ATACAMA J is screwed into an insert nut placed in the furniture side A lateral pin slots into the furniture side helps achieve a structural connection as well as an equal load distribution over the furniture side and base Two Pan Head screws secure ATACAMA J to the furniture bottom. By using a rounded key with hexagonal bit or a cordless driver-drill with an appropriate drill bit, a Ø 8mm through hole in the furniture bottom, allows you to connect the bottom to the side first and then by lowering the hexagonal bit you can adjust the height of the construction without interfering with the side connection The Zinc alloy foot is provided with an independent plastic glide for easier adjustment and to prevent scratches on the floor A plastic cover cap can be used to conceal the housing at the bottom Adjustment range : 0-25 mm. Capacity loading: 175 kilos per leveller Minimum panel thickness:16 mm Material: Steel, Zinc Alloy and Plastic Tested according to Italian CATAS INSTITUTE requirements. ATACAMA J Rounded Key with S6 mm Hexagonal Bit Application for End Panel (Insert Nut Length: 13 mm) Application for Partition (Panel thickness: 18-19 mm; Insert Nut Length: 17 mm) Application for Partition (Panel thickness: 25 mm; Insert Nut Length: 10 mm) Cover Cap Plinth Clip Euro Bolt Pan Head Wood Screw (Ø 4 x 20 mm) 637.23.900 283.64.918 015.71.848 Insert Nut Length 13 mm Insert Nut Length 17 mm 030.10.863 030.10.065 045.08.008 020.90.904 001.10.335 Insert Nut Length 10 mm 030.10.867 7
ATACAMA J (Contd.) Installation INTEGRATO G Side Connection Adjustments Installation Plinth Clip 8
ORDERING INFORMATION Levellers Article Number Details UOM MRP (INR) 637.67.910 INTEGRATO G Piece 131.00 651.16.300 INTEGRATO Z Piece 92.00 637.23.900 ATACAMA J Piece 396.00 045.08.008 Cover Cap ø 8 mm Piece 3.00 015.71.848 Pan Head Screw Piece 1.00 030.10.863 INSERT NUT Length 13 mm Piece 6.00 030.10.065 INSERT NUT Length 17 mm Piece 8.00 030.10.867 INSERT NUT Length 10 mm Piece 8.00 001.10.335 Rounded Key with S6 mm Hexagonal Bit Piece 155.00 283.64.918 Plinth Clip Piece 70.00 020.90.904 Euro Bolt Ø10 For Plinth Clip Piece 35.00 9
H A N G E R S LIBRA H1 11-12 LIBRA H7 13-15 CONCEALED HANGER FOR MIRRORS 16 10
LIBRA H1 LIBRA H1 belongs to the innovative family of cabinet hangers especially created to satisfy all the customer's needs It is an unhanded version to be fixed behind the rear panel through three wood screws with only small cover caps left visible inside the cabinet It proves to be an extremely resistant and reliable solution as the zinccoated steel body is sensibly thick making it very strong Independent Vertical and Depth adjustments to easily and quickly align the cabinet against the wall Anti-turnover locking adjustment for domestic safety and to guarantee fast locking of the cabinet against the wall plate. Adjustments to be carried out from the inside of the cabinet through a hole covered with small cover caps The wall plate features oval holes which facilitate the correct positioning and give the possibility to carry out horizontal adjustments Capacity Loading: 75 Kgs. Per piece (150 Kgs. per pair) Material: Steel, Zinc Alloy and Plastic In accordance with the European Regulation DIN 68840. LIBRA H1 Drilling plan for LIBRA H1 fixed under the cabinet top. Side panel and service gap Back panel One set includes small cover caps, wall plate, wood screws and instruction sheet Cover Cap (White Plastic) Wall Plate 290.41.755 11
LIBRA H1 (Contd.) Installation Under the Cabinet Top Alternate Installation Installation on the Wall Cover Cap Insertion It is the responsibility of the customer: to ensure that the wall is of a suitable quality to hold the unit fixing in place. to use the proper hardware fittings according to the construction of the wall. Adjustments 12
LIBRA H7 LIBRA H7 belongs to the innovative family of cabinet hangers especially created to satisfy all the customer's needs It proves to be an extremely resistant and reliable solution as the zinccoated steel body is sensibly thick making it very strong Independent Vertical and Depth adjustments to easily and quickly align the cabinet against the wall The system never interferes with the drawer slides due to its slim side bracket wings Anti-turnover locking adjustment for domestic safety and to guarantee fast locking of the cabinet against the wall plate. Adjustments to be carried out from the inside of the cabinet The wall plate features oval holes which facilitate the correct positioning and give the possibility to carry out horizontal adjustments Capacity Loading: 200-400 Kgs. per pair (depends on the construction of the cabinet and the use of Aluminium bars) Material: Steel, Zinc Alloy and Plastic In accordance with the European Regulation DIN 68840. LIBRA H7 Screw Fixing with "Peg Joint" Application and Drilling Plans (without aluminium bars) Drilling Plans without back panel Each set includes wall plate, insert nuts, fixing screws, wood dowels and instruction sheet Wall Plate Drilling Plans with back panel (Wood Thickness 4-14 mm) LIBRA H7 Aluminium Bar (H=40.2mm; L=2500 mm) ) LIBRA H7 Aluminium Bar (H=80.5mm; L=2500 mm) The hanging system does not interfere with the drawer slides thanks to the slim side bracket wings 290.41.955 290.01.040 290.01.080 13
LIBRA H7 (Contd.) Recommended for bathroom unit with drawer/s. Recommended for kitchen base cabinets. Aluminium Bar (H=40.2 mm) Aluminium Bar (H=80.5 mm) Application and Drilling Plans (with aluminium bars) With Aluminium Bar H=40.2 mm and Back Panel 4 mm Thick With Aluminium Bar H=40.2 mm and Back Panel 8 mm Thick With Aluminium Bar H=80.5 mm and Back Panel 4 mm Thick Stress Intensity Level Suggested Positioning of Pre-drilled Ø 8 or Ø 10 Intermediate Pilot Holes According to Cabinet Width By adding extra hanging points on the aluminium bar, the capacity loading is more evenly distributed, thus sensibly reducing the stress intensity level on the wall 14
LIBRA H7 (Contd.) Installation Alternate Application without Top Installation on the Wall Adjustments Extra Hanging Points The pre-drilled pilot holes ease the drilling operations on the wall. Extra hanging points reduce the loading stress on the left/right wall plates. 15
CONCEALED HANGER FOR MIRRORS Concealed hanging bracket is slotted into the rear panel by making face boring. A Ø 5 through hole in the top edge, allows to align brackets vertically by using a cross screwdriver. Comes with an embedded bracket for screw hook Capacity loading for mirrors and panels: 80 Kgs. per pair Material: Steel, Zinc Alloy and Plastic CONCEALED HANGER Each set includes wood screws, rawl plugs and hook screws Installation on the Rear Panel and on the Wall Adjustments 291.04.312 (Set of 2) 16
Article Number Details UOM MRP (INR) 290.41.755 LIBRA H1 Set 452.00 290.41.955 LIBRA H7 Screw Fixing with "Peg Joint" Set 2194.00 290.01.040 Aluminium Profile H = 40.2mm; L = 2500mm Piece 3165.00 290.01.080 Aluminium Profile H = 80.5mm; L = 2500mm Piece 4860.00 291.04.312 CONCEALED HANGER for Mirrors Pair 434.00 17
In case of any query / issue, SMS HAFELE to 56070 Our customer care executive will get in touch with you and address your query / issue. Call us on our dedicated toll-free number: 1800 266 6667 Customer- friendly, deviation-free call connection to our Customer Care team Email us on: customercare@hafeleindia.com 18