High Drive Fundamental Quartz Crystal Oscillator NJU6368 Series PRELIMINARY GENERAL DESCRIPTION The NJU6368 series is a C-MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier, 3-stage divider and 3-state output buffer. The 3-stage divider generates only one frequency selected of f 0,f 0 /2,f 0 /4 and f 0 /8 by internal circuits is output. The oscillation amplifier is realized very low stand-by current using NAND circuit. The 3-state output buffer is C-MOS compatible and can drive 50pF(@5) C-MOS load. Furthermore, the package is small-sized MTP-6. PACKAGE OUTLINE NJU6368XC-C NJU6368XF1 FEATURES Operating oltage 2.7 to 5.5 Maximum Oscillation Frequency 50MHz Low Operating High Fan-out I OH /I OL =8mA@3.3 I OH /I OL =16mA@5.0 3-Stage Divider Maximum Divider f 0 /8 Oscillation Stop and Output Stand-by Function 3-State Output Buffer Oscillation Capacitors Cg and Cg on-chip Package Outline C-MOS Technology Thin-Chip/MTP-6 PAD LOCATION Thin-Chip 1 2 3 MTP-6 6 5 4 LINE-UP TABLE Type No. Internal Connect Cg/Cd A f 0 Connected A Line 15/15pF B f 0 /2 Connected B Line 15/15pF NJU6368 C f 0 /4 Connected C Line 15/15pF D f 0 /8 Connected D Line 15/15pF P f 0 Connected A Line Non COORDINATES No Pad Name X Y 1-207 247 2-207 -247 3 33-247 4 207-247 5 207-17 8 207 172 Starting Point:Chip Center Unit[um] Chip Size:0.67x0.75mm Thin-Chip Thickness:260±20um Pad Size:90x90um BLOCK DIAGRAM DD SS Rf 1/ 2 1/ 2 1/ 2 Cg Cd A B C D 3 STATE BUFFER 2002/12/18 ( 1 / 5 )
TREMINAL DESCRIPTION SYMBOL FUNCTION Oscillation and 3-state Output Buffer Conol H or OPEN L Output either one frequency selected of f 0, f 0 /2,f 0 /4 and f 0 /8 Note1) Oscillation Stop and High impedance Output Quartz Crystal Connecting Terminals =0 Frequency Output =3.3/5.0 Note1) Refer to the line-up table. ABSOLUTE MAXIMUM RATINGS (Ta=25 C) PARAMETER SYMBOL RATING UNIT Supply oltage -0.5 to +7.0 Input oltage IN -0.5 to +0.5 Output oltage O -0.5 to +0.5 Input I IN ±10 ma Output I O ±25 ma Power Dissipation Note 4) P D 200(MTP-6) mw Operating Temperature Range Topr -40 to +85 C Storage Temperature Range Tstg -55 to +125 C Note2) If the supply voltage( ) is less than 7.0, the input voltage must not over the level though 7.0 is limit specified. Note3) Decupling capacitor should be connected between and due to the stabilized operation for the circuit. Note4) Power Dissipation is the maximum value of a package simple substance. 2002/12/18 ( 2 / 5 )
ELECTRICAL CHARACTERISTICS (Ta=25 C) Operating oltage 2.7 5.5 ( =3.3,Ta=25 C) A version,fosc=16mhz,c L =30pF 8 B version,fosc=16mhz,c L =30pF 6 Operating I C version,fosc=16mhz,c L =30pF 4 DD D version,fosc=16mhz,c L =30pF 3 ma P version,fosc=16mhz,c L =30pF Note5) 8 Oscillation Stopping I STB =, No load 2 5 ua Stand-by Ist ==, No load Note6) 1 ua Input oltage IH IL 2.31 3.3 0 0.99 Output I OH OH =2.97 8 ma I OL OL =0.33 8 ma Input I IN =0.8 10.0 15.0 ua =0.2 1.8 3.0 ua 3-state Off Leakage I OZ =, = or ±0.1 ua Feedback Resistance Rf 255 KΩ Internal Capacitor Cg/Cd fosc=16mhz, A/B/C/D version 15/15 P version - pf Maximum Oscillation Frequency F MAX 50 MHz Output Signal C L =15pF, @ /2 45 50 55 SYM Symmey C L =30pF, @ /2 45 50 55 % Output Signal Rise C L =15pF,10% to 90% 2 4 C L =30pF,10% to 90% 4 8 Output Signal Fall C L =15pF,90% to 10% 2 4 C L =30pF,90% to 10% 4 8 Output Disable time T PLZ C L =15pF,R UP =10kΩ 150 Output Enable T PZL C L =15pF,R UP =10kΩ 150 Note5) P version is measured with external capacitors contained 13pF for Cg and 13pF for Cd. Note6) Excluding input current on Terminal. 2002/12/18 ( 3 / 5 )
( =5.0,Ta=25 C) A version,fosc=16mhz,c L =50pF 15 B version,fosc=16mhz,c L =50pF 11 Operating I DD C version,fosc=16mhz,c L =50pF 9 D version,fosc=16mhz,c L =50pF 7 ma P version,fosc=16mhz,c L =50pF Note5) 15 Oscillation Stopping I STB =, No load 5 10 ua Stand-by Ist ==, No load Note6) 1 ua Input oltage IH IL 3.5 5.0 0 1.5 Output I OH OH =4.5 16 ma I OL OL =0.5 16 ma Input I IN =0.8 27.0 40.0 ua =0.2 5.5 8.0 ua 3-state Off Leakage I OZ =, = or ±0.1 ua Feedback Resistance Rf 255 KΩ Internal Capacitor Cg/Cd fosc=16mhz, A/B/C/D version 15/15 P version - pf Maximum Oscillation Frequency F MAX 50 MHz Output Signal C L =15pF, @ /2 45 50 55 SYM Symmey C L =50pF, @ /2 45 50 55 % Output Signal Rise C L =15pF,10% to 90% 2 4 C L =50pF,10% to 90% 4 8 Output Signal Fall C L =15pF,90% to 10% 2 4 C L =50pF,90% to 10% 4 8 Output Disable time T PLZ C L =15pF,R UP =10kΩ 100 Output Enable T PZL C L =15pF,R UP =10kΩ 100 Note5) P version is measured with external capacitors contained 13pF for Cg and 13pF for Cd. Note6) Excluding input current on Terminal. 2002/12/18 ( 4 / 5 )
MEASURMENT CIRCUITS (1)Output Signal Symmey(C L =15/30/50pF) 1000pF 1/2 C L H L (2)Output Signal Rise/Fall (C L =15/30/50pF) 1000pF 90% 50% C L 10% (3)Output Disable/Enable (C L =15pF,R UP =10kΩ) R UP=10kΩ 0.2 0.8 C L=15pF T PLZ OL OH T PZL [CAUTION] The specificatio on this data book are only given for information, without any guarantee as regards either mistakes or omissio. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the indusial rights. 2002/12/18 ( 5 / 5 )