Interference Suppression Film Capacitors MKP Radial Potted Type

MKP 339 X2 Interference Suppression Film Capacitors FEATURES 168x12(halfpage) l w l w 7.5 to 27.5 mm lead pitch. Supplied loose in box, taped on ammopack or reel P h imensions in mm (1) F -F <0.3mm F = 7.5 + 0.6/- 0.1 mm lt Ø dt F' (1) F 10 15 h h' H Ø dt Lead (Pb)-free product RoHS-compliant product RATE VOLTAGE AC 275 V; 50 to 60 Hz PERMISSIBLE C VOLTAGE e3 RoHS COMPLIANT FOCUS PROUCT C 630 V APPLICATIONS X2 class For X2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of 275 V(AC). For application limitations please refer page 9. REFERENCE STANARS IEC 60384-14 2nd edition and EN 132400 IEC 60065, pass. flamm. class B 250 V: CSA-C22.2 No 1; UL1414 275 V: CSA-C22.2 No 8; CQC 275 V: ENEC 305 V: UL1283 MARKING C-value; tolerance; rated voltage; sub-class; manufacturer s type designation; code for dielectric material, only for pitch 15 mm; manufacturer location; manufacturer s emblem; year and week IELECTRIC Polypropylene film ELECTROES Metallized film CONSTRUCTION Mono construction ENCAPSULATION Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 CLIMATIC TESTING CLASS ACC. TO EN 60068-1 55/110/56/B CAPACITANCE RANGE (E12 SERIES) E12 series 0.001 to 4.7 µf Preferred values acc. to E6 CAPACITANCE TOLERANCE ± 20 %; ± 10 % LEAS Tinned wire (Lead (Pb)-free) RATE TEMPERATURE 110 C MAXIMUM APPLICATION TEMPERATURE 110 C for C > 470 nf 125 C for C 470 nf ETAIL SPECIFICATION For more detailed data and test requirements contact: rfi@vishay.com www.vishay.com For technical questions, contact: rfi@vishay.com ocument Number: 28138 138 Revision: 07-Aug-07

Interference Suppression Film Capacitors MKP 339 X2 COMPOSITION OF CATALOG NUMBER TYPE AN PITCHES 7.5 mm 7.5 mm (bent back) 339 10.0 mm X2 15.0 mm 22.5 mm 27.5 mm CAPACITANCE (numerically) MULTIPLIER (nf) 0.1 2 1 3 10 4 100 5 Example: 104 = 10 x 10 = 100 nf BFC2 339 XX XX X 2222 (*) 339 XX XX X (*) old ordering code TYPE PACKAGING STANAR IMENSIONS C-TOL COE NUMBER 339 X2 loose in box taped 1) loose in box lead length 3.5 + 1/- 0.5 mm or 3.5 ± 0.3 mm BFC2 339 20... lead length 5.0 ± 1.0 mm BFC2 339 22... lead length 25.0 ± 2.0 mm BFC2 339 24... reel: H = 18.5 mm; P o = 12.7 mm and 15.0 mm ± 20 % BFC2 339 26... ammopack: H = 18.5 mm; P o = 12.7 mm BFC2 339 28... reel: pitch 7.5 mm (bent back), H = 16.0 mm; P o = 15.0 mm BFC2 339 56... ammopack: pitch 7.5 mm (bent back), H = 16.0 mm; P o = 15.0 mm BFC2 339 58... lead length 3.5 + 1/- 0.5 mm or 3.5 ± 0.3 mm BFC2 339 10... lead length 5.0 ± 1.0 mm BFC2 339 12... lead length 25.0 ± 2.0 mm BFC2 339 14... reel: H = 18.5 mm; P o = 12.7 mm and 15.0 mm ± 10 % BFC2 339 16... ammopack: H = 18.5 mm; P o = 12.7 mm BFC2 339 18... taped 1) reel: pitch 7.5 mm (bent back), H = 16.0 mm; P o = 15.0 mm BFC2 339 66... ammopack: pitch 7.5 mm (bent back), H = 16.0 mm; P o = 15.0 mm BFC2 339 68... PACKAGING ALTERNATIVE LARGER PITCH SIZES C-TOL COE NUMBER lead length 3.5 + 1/- 0.5 mm or 3.5 ± 0.3 mm BFC2 339 21... loose in box lead length 5.0 ± 1.0 mm BFC2 339 23... ± 20 % lead length 25.0 ± 2.0 mm BFC2 339 25... taped reel or ammopack: H = 18.5 mm; P 0 = 12.7 mm BFC2 339 27... lead length 3.5 + 1/- 0.5 mm or 3.5 ± 0.3 mm BFC2 339 11... loose in box lead length 5.0 ± 1.0 mm BFC2 339 13... ± 10 % lead length 25.0 ± 2.0 mm BFC2 339 15... taped reel or ammopack: H = 18.5 mm; P 0 = 12.7 mm BFC2 339 17... Note 1. For detailed tape specification refer to Packaging Information; www.vishay.com/docs/28139/packinfo.pdf ocument Number: 28138 For technical questions, contact: rfi@vishay.com www.vishay.com Revision: 07-Aug-07 139

MKP 339 X2 Interference Suppression Film Capacitors SPECIFIC REFERENCE ATA MKP 339 X2 275 VAC ESCRIPTION VALUE Tangent of loss angle: at 1 khz at 10 khz C < 470 nf 10 x 10-4 20 x 10-4 470 nf C 1µF 20 x 10-4 70 x 10-4 C>1µF 30 x 10-4 - Rated voltage pulse slope (du/dt) R at 385 V (C) 100 V/µs R between leads, for C 0.33 µf at 100 V; 1 min > 15 000 MΩ RC between leads, for C > 0.33 µf at 100 V; 1 min > 5000 s R between leads and case; 100 V; 1 min > 30 000 MΩ Withstanding (C) voltage (cut off current 10 ma); rise time 100 V/s: C 1 µf 2200 V; 1 min C>1 µf 1800 V; 1 min Withstanding (AC) voltage between leads and case 2050 V; 1 min Max. application temperature 110 C for C > 470 nf 125 C for C 470 nf PREFERRE TYPES: U Rac = 275 V; C-tol = ± 20 % C (µf) PITCH IMENSIONS 1) w x h (h ) x l MASS (g) I t = 3.5 + 1/- 0.5 mm CATALOG NUMBER BFC2 339... AN PACKAGING LOOSE IN BOX TAPE short leads 2) long leads see table page 6 I t = 5.0 ± 1.0 mm SPQ I t = 25.0 ± 2.0 mm SPQ SPQ 0.001 7.5 4.0 x 9.0 x 10.0 0.4 20102 22102 1500 24102 1000 28102 1250 0.001 10.0 4.0 x 10.0 x 12.5 0.6 21102 23102 1000 25102 1250 27102 950 0.0015 7.5 4.0 x 9.0 x 10.0 0.4 20152 22152 1500 24152 1000 28152 1250 0.0015 10.0 4.0 x 10.0 x 12.5 0.6 21152 23152 1000 25152 1250 27152 950 0.0022 7.5 4.0 x 9.0 x 10.0 0.4 20222 22222 1500 24222 1000 28222 1250 0.0022 10.0 4.0 x 10.0 x 12.5 0.6 21222 23222 1000 25222 1250 27222 950 0.0033 7.5 4.0 x 9.0 x 10.0 0.4 20332 22332 1500 24332 1000 28332 1250 0.0033 10.0 4.0 x 10.0 x 12.5 0.6 21332 23332 1000 25332 1250 27332 950 0.0047 7.5 4.0 x 9.0 x 10.0 0.4 20472 22472 1500 24472 1000 28472 1250 0.0047 10.0 4.0 x 10.0 x 12.5 0.6 21472 23472 1000 25472 1250 27472 950 0.0068 7.5 4.0 x 9.0 x 10.0 0.4 20682 22682 1500 24682 1000 28682 1250 0.0068 10.0 4.0 x 10.0 x 12.5 0.6 21682 23682 1000 25682 1250 27682 950 0.01 7.5 4.0 x 9.0 x 10.0 0.4 20103 22103 1500 24103 1000 28103 1250 0.01 10.0 4.0 x 10.0 x 12.5 0.6 21103 23103 1000 25103 1250 27103 950 0.015 7.5 4.0 x 9.0 x 10.0 0.4 20153 22153 1500 24153 1000 28153 1250 0.015 10.0 4.0 x 10.0 x 12.5 0.6 21153 23153 1000 25153 1250 27153 950 0.022 7.5 4.0 x 9.0 x 10.0 0.4 20223 22223 1500 24223 1000 28223 1250 0.022 10.0 4.0 x 10.0 x 12.5 0.6 21223 23223 1000 25223 1250 27223 950 0.033 7.5 4.0 x 9.0 x 10.0 0.4 20333 22333 1500 24333 1000 28333 1250 0.033 10.0 4.0 x 10.0 x 12.5 0.6 21333 23333 1000 25333 1250 27333 950 0.047 7.5 5.0 x 10.5 x 10.0 0.6 20473 22473 1000 24473 1250 28473 1000 0.047 10.0 4.0 x 10.0 x 12.5 0.6 21473 23473 1000 25473 1250 27473 950 0.068 7.5 6.0 x 11.5 x 10.0 0.8 20683 22683 750 24683 1000 28683 750 0.068 10.0 5.0 x 11.0 x 12.5 0.9 21683 23683 1000 25683 1000 27683 750 0.1 10.0 6.0 x 12.0 x 12.5 1.1 20104 22104 750 24104 750 28104 600 0.1 7.5 3) 6.0 x 12.0 (14.0) x 12.5 1.1 58104 1000 0.1 15.0 5.0 x 11.0 x 17.5 1.0 21104 23104 1250 25104 1000 27104 1100 0.15 15.0 6.0 x 12.0 x 17.5 1.4 20154 22154 1000 24154 1000 26154 900 0.15 7.5 3) 6.0 x 12.0 (14.0) x 17.5 1.4 56154 800 0.22 15.0 7.0 x 13.5 x 17.5 1.8 20224 22224 750 24224 500 26224 800 0.22 7.5 3) 7.0 x 13.5 (15.5) x 17.5 1.8 56224 700 0.33 15.0 8.5 x 15.0 x 17.5 2.4 20334 22334 750 24334 500 26334 650 0.33 7.5 3) 8.5 x 15.0 (17.0) x 17.5 2.4 56334 550 0.47 15.0 10.0 x 16.5 x 17.5 3.0 20474 22474 500 24474 450 26474 600 0.47 7.5 3) 10.0 x 16.5 (18.5) x 3.0 56474 500 www.vishay.com For technical questions, contact: rfi@vishay.com ocument Number: 28138 140 Revision: 07-Aug-07

Interference Suppression Film Capacitors MKP 339 X2 C (µf) PITCH IMENSIONS 1) w x h (h ) x l MASS (g) I t = 3.5 + 1/- 0.5 mm CATALOG NUMBER BFC2 339... AN PACKAGING LOOSE IN BOX TAPE short leads 2) long leads see table page 6 I t = 5.0 ± 1.0 mm SPQ I t = 25.0 ± 2.0 mm Notes 1. h = height for straight leads and h = height for bent back leads 2. I t = 3.5 + 1/- 0.5 mm for pitch = 7.5 mm and 10 mm and I t = 3.5 ± 0.3 mm for pitch = 15 mm; 22.5 mm and 27.5 mm. 3. Bent back to pitch = 7.5 mm. SPQ SPQ 0.68 8.5 x 18.0 x 26.0 3.8 20684 22684 200 24684 250 26684 450 1.0 22.5 10.0 x 19.5 x 26.0 6.8 20105 22105 200 24105 200 26105 350 1.5 13.0 x 23.0 x 31.0 9.2 20155 22155 100 24155 125 2.2 15.0 x 25.0 x 31.0 12.3 20225 22225 100 24225 125 3.3 27.5 18.0 x 28.0 x 31.0 16.1 20335 22335 100 24335 100 4.7 21.0 x 31.0 x 31.0 20.3 20475 22475 50 24475 75 ALTERNATIVE LARGER PITCH SIZE: U Rac = 275 V; C-tol = ± 20 % C (µf) PITCH IMENSIONS w x h x l MASS (g) I t = 3.5 + 1 /- 0.3 mm CATALOG NUMBER BFC2 339... AN PACKAGING LOOSE IN BOX TAPE short leads 1) long leads see table page 6 I t = 5.0 ± 1.0 mm SPQ I t = 25.0 ± 2.0 mm Note 1. I t = 3.5 + 1/- 0.5 mm for pitch = 7.5 mm and 10 mm and I t = 3.5 ± 0.3 mm for pitch = 15 mm; 22.5 mm and 27.5 mm. SPQ SPQ 0.01 90001 90007 1250 90014 1000 90021 1100 0.015 90002 90008 1250 90015 1000 90022 1100 0.022 90003 90009 1250 90016 1000 90023 1100 0.033 15.0 5.0 x 11.0 x 17.5 1.0 90004 90011 1250 90017 1000 90024 1100 0.047 90005 90012 1250 90018 1000 90025 1100 0.068 90006 90013 1250 90019 1000 90026 1100 0.15 21154 23154 300 25154 250 27154 600 0.22 6.0 x 15.5 x 26.0 2.4 21224 23224 300 25224 250 27224 600 22.5 0.33 21334 23334 300 25334 250 27334 600 0.47 7.0 x 16.5 x 26.0 2.9 21474 23474 200 25474 250 27474 500 0.47 90076 90078 100 90081 150 0.68 27.5 9.0 x 19.0 x 31.0 5.5 21684 23684 100 25684 150 1.0 11.0 x 21.0 x 31.0 7.4 21105 23105 100 25105 125 ocument Number: 28138 For technical questions, contact: rfi@vishay.com www.vishay.com Revision: 07-Aug-07 141

MKP 339 X2 Interference Suppression Film Capacitors PREFERRE TYPES: U Rac = 275 V; C-tol = ± 10 % C 4) (µf) PITCH IMENSIONS 1) w x h (h ) x l MASS (g) I t = 3.5 + 1/- 0.5 mm CATALOG NUMBER BFC2 339... AN PACKAGING LOOSE IN BOX TAPE short leads 2) long leads see table page 6 I t = 5.0 ± 1.0 mm SPQ I t = 25.0 ± 2.0 mm Notes 1. h = height for straight leads and h = height for bent back leads. 2. I t = 3.5 + 1/- 0.5 mm for pitch = 7.5 mm and 10 mm and I t = 3.5 ±0 0.3 mm for pitch = 15 mm; 22.5 mm and 27.5 mm. 3. Bent back to pitch = 7.5 mm. 4. Available in E12 series on request. SPQ SPQ 0.001 7.5 4.0 x 9.0 x 10.0 0.5 10102 12102 1500 14102 1000 18102 1250 0.001 10.0 4.0 x 10.0 x 12.5 0.6 11102 13102 1000 15102 1250 17102 950 0.0015 7.5 4.0 x 9.0 x 10.0 0.5 10152 12152 1500 14152 1000 18152 1250 0.0015 10.0 4.0 x 10.0 x 12.5 0.6 11152 13152 1000 15152 1250 17152 950 0.0022 7.5 4.0 x 9.0 x 10.0 0.5 10222 12222 1500 14222 1000 18222 1250 0.0022 10.0 4.0 x 10.0 x 12.5 0.6 11222 13222 1000 15222 1250 17222 950 0.0033 7.5 4.0 x 9.0 x 10.0 0.5 10332 12332 1500 14332 1000 18332 1250 0.0033 10.0 4.0 x 10.0 x 12.5 0.6 11332 13332 1000 15332 1250 17332 950 0.0047 7.5 4.0 x 9.0 x 10.0 0.5 10472 12472 1500 14472 1000 18472 1250 0.0047 10.0 4.0 x 10.0 x 12.5 0.6 11472 13472 1000 15472 1250 17472 950 0.0068 7.5 4.0 x 9.0 x 10.0 0.5 10682 12682 1500 14682 1000 18682 1250 0.0068 10.0 4.0 x 10.0 x 12.5 0.6 11682 13682 1000 15682 1250 17682 950 0.01 7.5 4.0 x 9.0 x 10.0 0.5 10103 12103 1500 14103 1000 18103 1250 0.01 10.0 4.0 x 10.0 x 12.5 0.6 11103 13103 1000 15103 1250 17103 950 0.015 7.5 4.0 x 9.0 x 10.0 0.5 10153 12153 1500 14153 1000 18153 1250 0.015 10.0 4.0 x 10.0 x 12.5 0.6 11153 13153 1000 15153 1250 17153 950 0.022 7.5 4.0 x 9.0 x 10.0 0.5 10223 12223 1500 14223 1000 18223 1250 0.022 10.0 4.0 x 10.0 x 12.5 0.6 11223 13223 1000 15223 1250 17223 950 0.033 7.5 5.0 x 10.5 x 10.0 0.6 10333 12333 1000 14333 1250 18333 1000 0.033 10.0 4.0 x 10.0 x 12.5 0.6 11333 13333 1000 15333 1250 17333 950 0.047 7.5 6.0 x 11.5 x 10.0 0.8 10473 12473 750 14473 1000 18473 750 0.047 10.0 4.0 x 10.0 x 12.5 0.6 11473 13473 1000 15473 1250 17473 950 0.068 10.0 5.0 x 11.0 x 12.5 0.9 10683 12683 1000 14683 1000 18683 750 0.068 7.5 3) 5.0 x 11.0 (13.0) x 12.5 0.9 68683 1300 0.1 10.0 6.0 x 12.0 x 12.5 1.1 10104 12104 750 14104 750 18104 600 0.1 7.5 3) 6.0 x 12.0 (14.0) x 12.5 1.1 68104 1000 0.1 15.0 5.0 x 11.0 x 17.5 1.0 11104 13104 1250 15104 1000 17104 1100 0.15 15.0 6.0 x 12.0 x 17.5 1.4 10154 12154 1000 14154 1000 16154 900 0.15 7.5 3) 6.0 x 12.0 (14.0) x 17.5 1.4 66154 800 0.22 15.0 7.0 x 13.5 x 17.5 1.8 10224 12224 750 14224 500 16224 800 0.22 7.5 3) 7.0 x 13.5 (15.5) x 17.5 1.8 66224 700 0.33 15.0 8.5 x 15.0 x 17.5 2.4 10334 12334 750 14334 500 16334 650 0.33 7.5 3) 8.5 x 15.0 (17.0) x 17.5 2.4 66334 550 0.47 15.0 10.0 x 16.5 x 17.5 3.0 10474 12474 500 14474 450 16474 600 0.47 7.5 3) 10.0 x 16.5 (18.5) x 17.5 3.0 66474 500 0.68 10.0 x 19.5 x 26.0 6.8 10684 12684 200 14684 200 16684 350 22.5 1.0 12.0 x 22.0 x 26.0 7.8 10105 12105 150 14105 200 16105 300 1.5 13.0 x 23.0 x 31.0 9.2 10155 12155 100 14155 125 2.2 27.5 15.0 x 25.0 x 31.0 12.3 10225 12225 100 14225 125 3.3 21.0 x 31.0 x 31.0 20.3 10335 12335 50 14335 75 www.vishay.com For technical questions, contact: rfi@vishay.com ocument Number: 28138 142 Revision: 07-Aug-07

Interference Suppression Film Capacitors MKP 339 X2 ALTERNATIVE LARGER IMENSIONS: U Rac = 275 V; C-tol = ± 10 % C 2) (µf) PITCH IMENSIONS w x h x l MASS (g) I t = 3.5 + 1/- 0.5 mm CATALOG NUMBER BFC2 339... AN PACKAGING LOOSE IN BOX TAPE short leads 1) long leads see table page 6 I t = 5.0 ± 1.0 mm SPQ I t = 25.0 ± 2.0 mm SPQ SPQ 0.01 90027 90039 1250 90052 1000 90064 1100 0.015 90029 90042 1250 90054 1000 90066 1100 0.022 90032 90044 1250 90056 1000 90068 1100 15.0 5.0 x 11.0 x 17.5 1.0 0.033 90034 90046 1250 90058 1000 90071 1100 0.047 90036 90048 1250 90061 1000 90073 1100 0.068 11683 13683 1250 15683 1000 17683 1100 0.15 11154 13154 300 15154 250 17154 600 0.22 6.0 x 15.5 x 26.0 2.4 11224 13224 300 15224 250 17224 600 22.5 0.33 11334 13334 300 15334 250 17334 600 0.47 7.0 x 16.5 x 26.0 2.9 11474 13474 200 15474 250 17474 500 0.68 9.0 x 19.0 x 31.0 5.5 11684 13684 100 15684 150 27.5 1.0 11.0 x 21.0 x 31.0 7.4 11105 13105 100 15105 125 Notes 1. I t = 3.5 + 1/- 0.5 mm for pitch = 7.5 mm and 10 mm and I t = 3.5 ± 0.3 mm for pitch = 15 mm; 22.5 mm and 27.5 mm. 2. Available in E12 series on request. TAPING INFORMATION AN LEA IAMETER PITCH (tolerance: ± 0.4 mm) TYPE IMENSIONS 1) LEA IAMETER 7.5 mm ammopack H = 18.5 mm, P o = 12.7 mm 0.50 ± 0.05 mm 10.0 mm bent back to 7.5 mm ammopack H = 16 mm, P o = 15.0 mm 0.60 ± 0.06 mm 15.0 mm bent back to 7.5 mm (w 6 mm) reel H = 16 mm, P o = 15.0 mm 0.60 ± 0.06 mm 15.0 mm bent back to 7.5 mm (w > 6 mm) reel H = 16 mm, P o = 15.0 mm 0.80 ± 0.08 mm 10.0 mm ammopack H = 18.5 mm, P o = 12.7 mm 0.60 ± 0.06 mm 15.0 mm (w 6 mm) reel H = 18.5 mm, P o = 12.7 mm 0.60 ± 0.06 mm 15.0 mm (w > 6 mm) reel H = 18.5 mm, P o = 12.7 mm 0.80 ± 0.08 mm 22.5 mm reel H = 18.5 mm, P o = 12.7 mm 0.80 ± 0.08 mm 27.5 mm not available 0.80 ± 0.08 mm Note 1. Standard reel diameter = 500 mm, reel diameter = 356 mm is available on request. a) Other taping possibilities are available on request. APPROVALS COUNTRY SPECIFICATION ELECTRICAL VALUES FILE NUMBERS APPROVAL MARK U.S.A. and Canada (for AC 250 V) UL1414 and CSA-C22.2 No.1 1 nf to 1 µf E112471 R U.S.A. (for AC 305 V) Canada (for AC 275 V) UL1283 1 nf to 4.7 µf E109565 CSA-C22.2 No.8 1 nf to 4.7 µf 1438188 China CQC 1nFto4.7 µf CQC03001006961 (Roeselare) CQC03001006960 (Shanghai) CQC06001018290 (Famalicao) CB TEST CERTIFICATE (for AC 275 V) 1 nf to 4.7 µf: 55/110/56/B FI 3580 Europe EN132400 IEC 60384-14 2 nd edition 1 nf to 4.7 µf FI2006007AI CQC 16 ocument Number: 28138 For technical questions, contact: rfi@vishay.com www.vishay.com Revision: 07-Aug-07 143

MKP 339 X2 Interference Suppression Film Capacitors MOUNTING NORMAL USE The capacitors are designed for mounting on printed -circuit boards.the capacitors packed in bandoliers are designed for mounting in pinted-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to Packaging information. eccentricity b max = b + 0.3 mm SPECIFIC METHO OF MOUNTING TO WITHSTAN VIBRATION AN SHOCK l max = l + 0.3 mm CBA116 In order to withstand vibration and shock tests,it must be insured that the stand-off pips are in good contact with the printed circuit board: For pitches 15 mm capacitors shall be mechanically fixed by the leads For larger pitches the capacitors shall be mounted in the same way and the body clamped. SPACE REQUIREMENTS ON PRINTE CIRCUIT BOAR The maximum length and width of film capacitors is shown in the figure: Eccentricity as in figure. The maximum eccentricity is smaller than or equal to the product concerned Product heigth with seating plane as given by IEC 60717 as reference: h max + 0.3 mm or h max h + 0.3 mm. STORAGE TEMPERATURE Storage temperature: T stg = - 25 to + 40 C with RH maximum 80 % without condesation RATINGS AN CHARACTERISTICS REFERENCE CONITIONS Unless otherwise specified, all elctrical values apply to an ambient temperature of 23 ± 1 C, an atmospheric pressure of 86 to 106 kpa and a relative humidity of 50 ± 2 %. For reference testing, a conditioning period shall be applied over 96 ± 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. www.vishay.com For technical questions, contact: rfi@vishay.com ocument Number: 28138 144 Revision: 07-Aug-07

Interference Suppression Film Capacitors MKP 339 X2 CHARACTERISTICS ΔC/C 2(%) 4 0 typical Impedance 10 3 Impedance (%) 10 1 1 nf 4.7 nf 10 nf 47 nf 100 nf - 2 max. 10 0 4700 nf 470 nf 1000 nf - 4 10-1 - 6-50 min. 0 50 Tamb ( C) 100 10-2 10 4 10 5 10 6 10 7 f (Hz) 10 8 Tanget of loss angle 10 3 Resonant frequency 10 2 issipation factor (x 10-4) 10 2 10 1 C > 1 µf 220 nf < C 1 µf 47 nf < C 220 nf 10 nf < C 47 nf C 10 nf f (MHz) 10 1 10 0 X2 10 0 10 1 10 2 10 3 10 4 10 5 f (Hz) 10-1 1 10 100 1000 C (nf) 10 000 Max RMS voltage and current as a function of frequency 10 3 AC voltage (V) 10 2 10 4 AC current (ma) 10 2 10 1 4700 nf 1000 nf 470 nf 100 nf 47 nf 10 nf 4.7 nf Tamb 105 C 10 1 10 1 10 2 10 3 10 4 f (Hz) 10 5 10 0 Tamb 105 C 10-1 10 1 10 2 10 3 10 4 f (Hz) 10 5 1nF ocument Number: 28138 For technical questions, contact: rfi@vishay.com www.vishay.com Revision: 07-Aug-07 145

MKP 339 X2 Interference Suppression Film Capacitors INSULATION RESISTANCE 10 6 RC (s) 10 5 10 4 0 20 40 60 80 100 Tamb ( C) APPLICATION NOTES For X2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of 275 V (AC). These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used. These capacitors are not intended for series impedance application. For these situations in case safety approvals are requested, please refer to our special capacitors of 1772 series with internal series connection. The maximum ambient temperature must not exceed 110 C for C > 470 nf 125 C for C 470 nf Rated voltage pulse slope: If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 385 V (C) and divided by the applied voltage. INSPECTION REQUIREMENTS GENERAL NOTES 1. Sub-clause numbers of tests and performance requirements refer to the Sectional Specification, IEC_publication EN132400 (IEC 60384-14) and Section One of this specification. 2. In this table: = destructive N = non-distructive Group C inspection requirements SUB-CLAUSE NUMBER AN TEST OR N CONITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 imensions (detail) As specified in Chapters General data of this specification Initial measurements Tangent of loss angle: For C 1 µf at 10 khz For C > 1 µf at 1 khz 4.3 Robustness of terminations Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90 No visible damage www.vishay.com For technical questions, contact: rfi@vishay.com ocument Number: 28138 146 Revision: 07-Aug-07

Interference Suppression Film Capacitors MKP 339 X2 SUB-CLAUSE NUMBER AN TEST OR CONITIONS N 4.4 Resistance to soldering heat No pre-drying Method: 1A Solder bath: 280 C uration: 10 s 4.19 Component solvent Isopropylalcohol at room temperature resistance Method: 2 Immersion time: 5 ± 0.5 min Recovery time: Min 1 hour, max 2 hours 4.4.2 Final measurements Visual examination SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 Initial measurements 4.20 Solvent resistance of the marking: see Section General notes ; item 5. Tangent of loss angle Insulation resistance Tangent of loss angle: For C 1 µf at 10 khz For C > 1 µf at 1 khz Isopropylalcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 ± 0.5 min θa = - 55 C PERFORMANCE REQUIREMENTS No visible damage Legible marking ΔC/C 5 % of the value measured initially. Increase of tan δ: 0.008 for: C 1 µf or 0.005 for: C > 1 µf Compared to values measured initially As specified in Section Insulation Resistance of this specification No visible damage Legible marking 4.6 Rapid change of temperature θb = + 110 C 5 cycles uration t = 30 min 4.6.1 Inspection Visual examination No visible damage 4.7 Vibration (see note 3.1) Mounting: see Section Mounting of this specification Procedure B4 Frequency range: 10 to 55 Hz. Amplitude: 0.75 mm or Acceleration 98 m/s² (whichever is less severe) Total duration 6 hours. 4.7.2 Final inspection Visual examination No visible damage 4.9 Shock (see note 3) Mounting: see Section Mounting for more information Pulse shape: half sine Acceleration: 490 m/s² uration of pulse: 11 ms ocument Number: 28138 For technical questions, contact: rfi@vishay.com www.vishay.com Revision: 07-Aug-07 147

MKP 339 X2 Interference Suppression Film Capacitors SUB-CLAUSE NUMBER AN TEST OR CONITIONS N 4.9.2 Final measurements Visual examination Tangent of loss angle PERFORMANCE REQUIREMENTS No visible damage ΔC/C 5 % of the value measured initially. Increase of tan δ: 0.008 for: C 1 µf or 0.005 for: C > 1 µf Compared to values measured initially Insulation resistance SUB-GROUP C1 COMBINE SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AN C1B 4.11 Climatic sequence 4.11.1 Initial measurements Measured in 4.4.2 and 4.9.2 Tangent of loss angle: Measured initially in C1A and C1B Temperature: 110 C 4.11.2 ry heat uration: 16 hours 4.11.3 amp heat cyclic Test b First cycle Temperature: - 55 C As specified in Section Insulation Resistance of this specification 4.11.4 Cold uration: 2 hours 4.11.5 amp heat cyclic Test b remaining cycles Visual examination No visible damage 4.11.6 Final measurements Tangent of loss angle Voltage proof 1200 V (C); 1 min between term. Insulation resistance SUB GROUP C2 4.12 amp heat steady state 56 days; 40 C; 90 to 95 % RH no load Legible marking ΔC/C 5 % of the value measured in 4.11.1. Increase of tan δ: 0.008 for: C 1 µf or 0.005 for: C > 1 µf Compared to values measured in 4.11.1. No permanent breakdown or flash-over 50 % of values specified in Section Insulation resistance of this specification 4.12.1 Initial measurements Tangent of loss angle: For C 1 µf at 10 khz or For C > 1 µf at 1 khz www.vishay.com For technical questions, contact: rfi@vishay.com ocument Number: 28138 148 Revision: 07-Aug-07

Interference Suppression Film Capacitors MKP 339 X2 SUB-CLAUSE NUMBER AN TEST OR N CONITIONS 4.12.3 Final measurements Visual examination Tangent of loss angle Voltage proof 1200 V (C); 1 min between term. Insulation resistance PERFORMANCE REQUIREMENTS No visible damage Legible marking ΔC/C 5 % of the value measured in 4.12.1. Increase of tan δ: 0. 008 for: C 1 µf or 0. 005 for: C > 1 µf Compared to values measured in 4.12.1. No permanent breakdown or flash-over 50 % of values specified in Section Insulation resistance of this specification SUB-GROUP C3 4.13.1 Initial measurements Tangent of loss angle: For C 1 µf at 10 khz For C > 1 µf at 1 khz 4.13 Impulse voltage 3 successive impulses, full wave, peak voltage: X2: 2.5 kv for C 1 µf X2: 2.5 kv/ C for C > 1 µf Max.24 pulses 4.14 Endurance uration: 1000 hours 1.25 x U Rac at 110 C Once in every hour the voltage is increased to 1000 V (RMS) for 0.1 s via resistor of 47 Ω ± 5 % 4.14.7 Final measurements Visual examination Tangent of loss angle No selfhealing breakdowns or flashover No visible damage Legible marking ΔC/C 10 % compared to values measured in 4.13.1. Increase of tan δ: 0.008 for: C 1 µf or 0.005 for: C > 1 µf Compared to values measured in 4.13.1. No permanent breakdown or flash-over Voltage proof 1200 V (C); 1 min between terminations. 2050 V (C); 1 min between terminations and case. 50 % of values specified in Section Insulation resistance of this specification Insulation resistance ocument Number: 28138 For technical questions, contact: rfi@vishay.com www.vishay.com Revision: 07-Aug-07 149

MKP 339 X2 Interference Suppression Film Capacitors SUB-CLAUSE NUMBER AN TEST OR N CONITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C4 4.15 Charge and discharge 10 000 cycles (50 c/s) charge to UR half sinewave uration: 5 ms ischarge resistance: 385 Vdc R = ----------------------------------------- 1.5 C ( du dt) R min = 2.2 Ω 4.15.1 Initial measurements Tangent of loss angle: For C 1 µf at 10 khz For C > 1 µf at 1 khz 4.15.3 Final measurements Tangent of loss angle ΔC/C 10 % compared to values measured in 4.15.1. Increase of tan δ: 0.008 for: C 1 µf or 0.005 for: C > 1 µf Compared to values measured in 4.15.1. 50 % of values specified in Section Insulation resistance of this specification Insulation resistance SUB-GROUP C5 4.16 Radio frequency characteristic SUB-GROUP C6 4.17 Passive flammability Class B Resonance frequency Bore of gas jet: Ø 0.5 mm Fuel: butane Test duration for actual volume V in mm³: V 250: 10 s 250 < V 500: 20 s 500 < V 1750: 30 s V > 1750: 60 s One flame application As specified in Section Resonant frequency of this specification. ± 10 % After removing test flame from capacitor, the capacitor must not continue to burn for more than 10 s. No burning particle must drop from the sample. SUB-GROUP C7 4.18 Active flammability 20 x 2.5 kv discharges on the test capacitor connected to U Rac The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required. www.vishay.com For technical questions, contact: rfi@vishay.com ocument Number: 28138 150 Revision: 07-Aug-07

Notice Legal isclaimer Notice Vishay Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. ocument Number: 91000 www.vishay.com Revision: 08-Apr-05 1