CS-24 V4 -P 3 2M A ( M as t e r ) CL-24 V4 -P32MA (Link) The Server Technology Smart PDU provides local LED input current monitoring, allowing IT personnel to determine safe levels of loading on a perphase basis while installing equipment into the rack/cabinet. The power data points, along with temperature and humidity measurements (provided via optional probes), are accessible through the built-in Web and CLI interfaces as well as through SNMP. The Smart Master PDU can be connected to a Smart Link PDU to extend the network access to the redundant or secondary power feed. Ke y F e at ur e s N e t wo r k Mo ni t o r i ng Gain access to valuable data through connections including HTTP(S), SSH, Telnet, SNMP, (S)FTP, SMTP, Syslog, LDAP(S), RS-232 serial, and more. T e mpe r a t ur e /Humi di t y Mo ni t o r i ng Master and Link units each support two external 10' (3m) T/H probes. Receive SNMP-based alerts and email notifications. A ut o - Fl i p C ur r e nt Di s pl a y Easy-to-read LEDs display current per phase to help prevent overloads and simplify three-phase load balancing in highdensity cabinets. "Smart" Br a nc h C i r c ui t P r o t e c t i o n This PDU meets the UL and IEC 60950-1 requirement for branch circuit protection through use of UL489 rated magnetic-hydraulic circuit breakers or UL248 fuses. Hi g h Re t e nt i o n Lo c ki ng Out l e t s Receptacles have high retention and are compatible with P- Lock type power cords. Fl e xi bl e Mo unt i ng Includes standard button mounts along with provisions for custom mounting brackets (contact Server Technology for details). C o l o r Ide nt i f i c a t i o n C o l o r Ide nt i f i c a t i o n Choose from six colors to designate circuits for rack PDUs in the data center. Color options include Blue, Red, Green, White, Yellow, and Black.
I nput s Input Voltage (V): 400 Input Plug: 230/400V Wye 32A IEC 60309 3P+N+PE 6Hr Input Current (A): 32 Input Current Rated (A): 32 Input Power Capacity (kw): 22.0 Out put s Connect or Rat ing (18) x IEC 60320/C13 Global Rating: 10A @230V L-N (6) x IEC 60320/C19 Global Rating: 16A @230V L-N Br anch Ci r cui t P r ot e ct i on (3) 20A Fuses, three (3) branch with tool-less retraction, meets UL 60950-1 requirements (Bussmann SC-20 fuses), 100 ka Interrupt Rating P hys i cal Dimensions: 69.0in tall x 1.75in wide x 2.25in deep [1753mm x 45mm x 58mm] Envi r onme nt al Oper at ing Envir onment : 32 F to 104 F / 0 C to 40 C 8%RH to 90%RH non-condensing 6,500ft/2km elevation S t or age Envir onment : -40 F to 185 F / -40 C to 85 C 8%RH to 90%RH non-condensing 50,000ft/15km elevation Quiescent / Unloaded Power Draw: < 10W for all configurations Communi cat i ons & Se cur i t y 10/100 Mbps Ethernet (RJ-45 connector), RS-232 serial (RJ-45 connector) Two (2) temperature/humidity sensor inputs (4P4C), Link port (RJ-12) - {also on Link PDU} Web-browser GUI and command-line interface (CLI): HTTP/HTTPS, TLSv1.2, SSHv2, Telnet, SNMPv2c and v3 (GET, SET, Traps), IPv4 and IPv6, LDAPv3/LDAPS, TACACS+, RADIUS, FTP/SFTP Ce r t i f i cat i ons Global : TUV T-Mark to EN 60950-1:2006+A11+A1+A12+A2 EMC to EN55024 (2010) and EN55032 (2012) CE Compliant RoHS, European Hazardous Materials Directive (Recast) 2011/65/EU WEEE Compliant M e as ur e me nt Accur acy Input Meas ur ement Accur acy: LED Current = ± 10% at 0.1 amp (0.3-9.9 amps) and 1 amp (> 9.9 amps) resolution GUI Current = ± 5% at 0.01 amp resolution (above 0.25 amp)
Opt i onal Acce s s or i e s EMTH-1-1 Combination Temperature/Humidity Probe, 10ft (3m) EMCU-1-1B Environmental Monitor adding: - Two (2) EMTH-1-1 temperature/humidity ports (one probe included) - One (1) EMWS-1-1 water sensor port (probe sold separately) - Four (4) dry contact (NO/NC) monitoring points - One (1) 8-bit analog-to-digital converter (0 to 5VDC) KIT-SUS-01 StartUp Stick for rapid configurationmounting Brackets - Buttons (KIT-0020) included for tool-less mounting (see diagram) - See the Mounting Bracket Guide for further suggestions - Custom mounting options available. Contact your local Server Technology representative Cable Retention Devices for non-locking cords - EZip - Cable Sleeve
Dr awi ng s
Addi t i onal I nf or mat i on Warrantr ant y: Server Technology offers a standard 2-year limited parts & labor warranty. Extended support is available at the time of purchase. See the Support Options on the website, or contact your local Server Technology representative for more information. Pat ent s : Information on Server Technology patents is available on the website at: www.servertech.com/products/patents HDOT, PIPS, POPS, CDU, Sentry, Server Technology, the ST Eye logo, and the globe logo are U.S. registered trademarks of Server Technology, Inc. Power Pivot, EZip, StartUp Stick and PRO2 are trademarks of Server Technology, Inc. Information in this document is current as of time of publishing. Contact your Server Technology representative for the most up-to-date information. 2018 Server Technology, Inc. 1 Cisco EnergyWise is a U.S. registered trademark of Cisco Technology, Inc. 2 VMware and VMware Ready is a registered trademark or trademark of VMware, Inc. in the United States and/or other jurisdictions. 3 Global models are typically for use in countries outside of North America. Contact your Server Technology representative for more information about which models are appropriate for your application. This datasheet was generated on: 30-Jun-2018