Walk-Behind Lawn Mowers Parts Manual Models 2 - PRO21SCH 12 - LM21 1 - LM21S 1 - LM21SW 1 - LM21S 11 - PRO21SCH 0 - LM21SW - LM21S - LM21SW 5 - LM21S - LM21SW 0700 /0 Printed in USA
THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance. For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals. Hardware descriptions are given in decimals. Decimals to Fractions.0 1/1.5 /1.5 1/8.25 5/8.188 /1.88 /1.250 1/.750 /.1 5/1.81 1/1.75 /8.875 7/8.8 7/1.8 15/1.500 1/2 1.00 1 SERVICE AND REPLACEMENT PARTS When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine. Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit. Record Unit Model and Serial numbers here: PRODUCT REGISTRATION The Ariens dealer must register the product at the time of purchase. Registering the product will help the company process warranty claims or contact you with the latest service information. All claims meeting requirements during the limited warranty period will be honored, whether or not the product registration card is returned. Keep a proof of purchase if you do not register your unit. Customer Note: If the dealer does not register your product, please fill out, sign, and return the product registration card to Ariens. YOUR SATISFACTION IS IMPORTANT Questions? Please follow these helpful steps: 1. Refer to the manuals supplied with your unit. They will guide you through safe and proper operation and maintenance. They contain specifications on your unit. If your questions are not answered in these manuals, go to step number two. 2. Contact Your Dealer. Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency. A factory trained staff is available to support your equipment needs. They stock genuine Ariens parts and lubricants manufactured with the same precision and skill as the original. If your questions are not resolved by the support staff, ask for the manager or owner. When contacting your Dealer supply your model and serial numbers. Record Engine Model and Serial numbers here: TO SPEED PARTS ORDERING: 1. Know the model and serial numbers of your unit. 2. Know the part number required.. Know the quantity required.. Know the part description. UNAUTHORIZED REPLACEMENT PARTS Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. Ariens disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts. 2
MODELS Model 2 (PRO21SCH) Cycle-Honda GXV OHV 5.5hp Recoil, Self-Propelled Serial No. 0005 and up Model 12 (LM21) Cycle-Kawasaki.0hp Recoil, Push Serial No. 0001 and up Model 1 (LM21S) Cycle-Kawasaki.0hp Recoil, Self-Propelled Serial No. 0001 and up Model 1 (LM21SW) Cycle-Kawasaki.0hp Recoil, Self-Propelled, Swivel Serial No. 0001 and up TABLE OF CONTENTS DECALS Decals.................................... MAIN FRAME Handlebar and Controls....................... Mower Pan and Bag.......................... 8 WHEELS Wheels and Adjusters....................... Friction Wheel and Adjusters.................. Swivel Wheels and Brackets.................. 1 ENGINE Engine, Blade, Belt......................... 15 Model 1 (LM21S) Cycle-Briggs & Stratton Quantum.5hp Recoil, Self-Propelled Serial No. 0001and up Model 11 (PRO21SCH) Cycle-Kawasaky.5hp Recoil, Self-Propelled Serial No. 0001and up Model 0 (LM21SW) Cycle-Briggs & Stratton Quantum.5hp Recoil, Self-Propelled Serial No. 005000 and up Model (LM21S) Cycle-Briggs & Stratton Intek OHV.75hp Recoil, Self-Propelled Serial No. 0001 and up Model (LM21SW) Cycle-Briggs & Stratton Intek OHV.75hp Recoil, Self-Propelled, Swivel Serial No. 0001 and up Model 5 (LM21S) Cycle-Briggs & Stratton Quantum.5hp Recoil, Self-Propelled Serial No. 0001and up Model (LM21SW) Cycle-Kawasaki.0hp Recoil, Self-Propelled, Swivel Serial No. 00001 and up Copyright 200 Ariens Company
DECALS Model 2, 12, 1, 1, 1, 11, 0,,, 5, 1 0771700B 2 052200 DANGER KEEP HANDS and FEET AWAY 7 5 8 PM00
Item Part No. Qty. Description DECALS Model 2, 12, 1, 1, 1, 11, 0,,, 5, 1 0770700 1 Decal, Speed Control 2 052200 1 Decal, Turtle & Rabbit (1, 1, 1, 11, 0,,, 5, ) 07700 1 Label, Bagger 21" 0808800 1 Decal, CPSC Danger 5 0808700 1 Decal, Ariens Deck (12, 1, 1, 1, 11, 0,,, 5, ) 0500 1 Decal, Ariens Deck (2, 11) 052000 1 Decal, Round Briggs and Stratton (, ) 7 0520 1 Decal, Briggs and Stratton Intek.75HP (, ) 0528500 1 Decal, Briggs and Stratton Quantum.5 (1, 0, 5) 8 08088000 1 Decal, Drive Cover Self Propelled (1, 1, 1,,, ) 077200 1 Decal, Bilingual Danger 0771700 1 Decal, Engine Control 05050 1 Decal, American Flag 5
HANDLEBAR AND CONTROLS Model 2, 12, 1, 1, 1, 11, 0,,, 5, 1 2 2 5 2 8 1 7 5 2 22 2 7 2 21 20 15 1 18 17 1 25 2 1 1 25 0 1 1 7 27 0 2 0 1 28 2 2 2 8 5 PM0027 Item Part No. Qty. Description 1 050 1 Bail, Engine 2 07200 Washer, Flat Steel.2 x. x. x.5 (2, 1, 1, 1, 11, 0,,, 5, ) 07200 2 Washer, Flat Steel.2 x. x. x.5 (12) 0551500 Bushing, Flange.25 x.88 x.50 (2, 1, 1, 1, 11, 0,,, 5, ) 0551500 2 Bushing, Flange.25 x.88 x.50 (12) 07517000 2 Cap, Vinyl.25 I.D. (2, 1, 1, 1, 11, 0,,, 5, ) 07517000 1 Cap, Vinyl.25 I.D. (12) 5 05200 1 Traction Bail (2, 1, 1, 1, 11, 0,,, 5, ) 0500 1 Handlebar
HANDLEBAR AND CONTROLS Model 2, 12, 1, 1, 1, 11, 0,,, 5, Item Part No. Qty. Description 7 000015 1 Cable, Engine Briggs and Stratton (1, 0, 5) 00001 1 Cable, Engine Kawasaki (12, 1, 11) 0700 1 Cable, Engine Briggs and Stratton (2, ) 02500 1 Cable, Engine Kawasaki (1, ) 8 0500 2 Cable, Anchor 0221500 2 Push Nut,.25 (1, 1, 1, 0,,, ) 0571700 2 Ring, Retaining External.25 x.01 (2, 11) 0221500 2 Push Nut,.25 (12) 02200 2 Bolt, Round Head Square Neck.25-20 x 1.25 (2, 1, 1, 1, 11, 0,,, 5, ) 02200 1 Bolt, Round Head Square Neck.25-20 x 1.25 (12) 052700 5 Nut, Locking Center.25-20 (2, 1, 1, 1, 11, 0,,, 5, ) 052700 Nut, Locking Center.25-20 (12) 0751700 Cable Tie 1 080 1 Cable, Lockout Control (1, 0,, ) 05000 1 Control, Throttle - Honda (2, 11) 1 01851 1 Brace, Speed Control (2, 1, 1, 1, 11, 0,,, 5, ) 15 0751 1 Bracket, Speed Control (2, 1, 1, 1, 11, 0,,, 5, ) 1 050051 1 Link, Handlebar Adjuster Left Hand (12, 1, 1, 1, ) 050151 1 Link, Handlebar Adjuster Right Hand (12, 1, 1, 1, ) 05851 2 Handlebar Bracket (2, 11, ) 17 078700 Washer, Bellville Spring (12, 1, 1, 1, 11, 0,,, 5, ) 18 055100 2 Bushing, Flange.25 x.50 x.51 x.875 1 052800 Nut, Locking Center.1-18 20 022200 1 Bolt, Round Head Square Neck.25-20 x 1.8 21 022000 1 Bolt, Round Head Square Neck.25-20 x.50 Grade 22 0751500 1 Knob (2, 1, 1, 1, 11, 0,,, 5, ) 2 00800 1 Rod, Speed Control (2, 1, 1, 1, 11, 0,,, 5, ) 2 00001 1 Traction Cable (2, 1, 1, 1, 11, 0,,, 5, ) 25 0210 2 Bolt, Round Head Square Neck.1-18 x 1.00 Grade 5 057000 Bolt, Round Head Square Neck.1-18 x.75 Grade 5 (2, 11, ) 2 010500 2 Shoulder Spacer 27 0215700 2 Bolt, Round Head Square Neck.1-18 x.75 Grade 5 (12, 1, 1, 1, ) 0210 2 Bolt, Round Head Square Neck.1-18 x 1.00 Grade 5 (2, 11, ) 28 05200 1 Nut, Locking Center.8-1 (2, 1, 1, 1, 11, 0,,, 5, ) 2 0200 2 Washer, Flat Steel.0 x.8 x.05 (2, 1, 1, 1, 11, 0,,, 5, ) 0 00500 2 Washer, Lock.75 x.5 Heavy (2, 1, 1, 1, 11, 0,,, 5, ) 1 05800 1 Pressure Flange (2, 1, 1, 1, 11, 0,,, 5, ) 2 0700 Washer, Flat Steel.281 x.2 x.05 (2, 1, 1, 1, 11, 0,,, 5, ) 0700 1 Pin, Cotter.0 x.50 (2, 1, 1, 1, 11, 0,,, 5, ) 020 1 Shift Link (2, 1, 1, 1, 11, 0,,, 5, ) 5 0200 1 Bell Crank, Speed Control (2, 1, 1, 1, 11, 0,,, 5, ) 02800 2 Friction Washer (2, 1, 1, 1, 11, 0,,, 5, ) 7 01800 1 Cap, Rod.75 (2, 1, 1, 1, 11, 0,,, 5, ) 8 0800 1 Swivel (2, 1, 1, 1, 11, 0,,, 5, ) 0222200 1 Bolt, Round Head Square Neck.8-1 x 1.25 (2, 1, 1, 1, 11, 0,,, 5, ) 0 071500 1 Pin, Hair Internal.08 x.18 x 1.18 (2, 1, 1, 1, 11, 0,,, 5, ) 1 07800 1 Support Pad 2 0815700 2 Rivet.187 x.575 02700 2 Washer, Flat Steel.21 x.50 x.0 0220000 1 Bolt, Round Head Square Neck.25-20 x 1.75 Grade 5 (1, 0,, ) 5 0200 1 Washer, Flat Steel.250 x.52 x.0 (1, 0,, ) 07008200 Nut, Push. 7 0500 1 Anchor, Cable (2, 1, 1, 1, 11,,, ) 7
MOWER PAN AND BAG Model 2, 12, 1, 1, 1, 11, 0,,, 5, 2 1 7 5 8 1 21 20 1 18 1 17 22 1 15 7 2 0 28 2 2 5 27 1 2 2 25 2 PM00 8
MOWER PAN AND BAG Model 2, 12, 1, 1, 1, 11, 0,,, 5, Item Part No. Qty. Description 1 080500 1 Bag, Consumer Black 2 08751 1 Frame, Bagger 055 1 Door, Catcher Plate 0751000 1 Button Bumper 5 075800 2 Bumper 0700 Screw, Tapping Hex Washer -2 x.50 (12, 1, 1, 1, 11, 0,,, 5, ) 7 07100 2 Screw, Tapping -2 x.8 Pan Head 8 0575 1 Plate, Catcher (12, 1, 1, 1, 0,,, 5) 07775 1 Plate, Catcher (2, 11, ) 02000 2 Bolt, Round Head Square Neck.25-20 x.8 0221500 2 Nut, Push 082200 1 Spring, Torsion.0 x.8 x.0 000 1 Pin, Door 1 702700 1 Mulch Master Mulcher Accessory 1 0500 2 Nut, Locking Flange.25-20 15 020 2 Bolt, Round Head Square Neck.25-20 x.75 Grade 5 1 05555 1 Hinge Base Weldment (12, 1, 1, 1, 11, 0,,, 5, ) 05 1 Hinge Plate Weldment (2) 17 0500 1 Clip, Snap In (1, 0,, ) 18 008000 2 Washer, Locking.25 x.077 1 05200 2 Nut, Hex.25-20 20 0500 1 Nut, Wing (2, 1, 1, 1, 11, 0,,, 5, ) 21 05885 1 Drive Cover (2, 1, 1, 1, 11, 0,,, 5, ) 22 05500 2 Trim Bumper 2 507500 1 Mower Pan Head with Decals (1, 1, 1, 0,,, ) 5070 1 Mower Pan Head with Decals (2, 11) 50700 1 Mower Pan Head with Decals (12) 2 0750700 Grommet, Plastic 25 07700 1 Baffle, Center 2 0715000 Screw, Tapping -1 x.2 Hex Washer Head 27 080200 1 Side Discharge Assembly (12, 1, 1, 1, 11, 0,,, 5, ) 28 08051 1 Side Discharge Cover (12, 1, 1, 1, 11, 0,,, 5, ) 2 0200 2 Washer, Flat Steel.0 x.8 x.05 (12, 1, 1, 1, 11, 0,,, 5, ) 0 050200 2 Nut, Locking Nylon.-18 (12, 1, 1, 1, 11, 0,,, 5, ) 1 0210 2 Bolt, Round Head Square Neck.1-18 x.75 Grade 2 (12, 1, 1, 1, 11, 0,,, 5, ) 2 05100 2 Nut, Push. (12, 1, 1, 1, 11, 0,,, 5, ) 0222000 2 Bolt, Round Head Square Neck.1-18 x.50 Grade 5 (2, 12, 1, 1,,, 5) 0855 1 Front Panel (2, 12, 1, 1,,, 5) 5 052800 2 Nut, Locking Center.1-18 (12, 1, 1, 1, 11, 0,,, 5, ) 05000 2 Nut, Spin Lock Flange.1-18 (2, 11) 057000 1 Bolt, Hex.8-1 x.50 Grade 5 (12) 7 0500 1 Nut, Locking Flange Nut,.75-1 (12)
WHEELS AND ADJUSTERS Model 2, 12, 1, 1, 1, 11, 0,,, 5, 1 2 18 7 8 22 5 1 21 0 15 17 1 1 1 1 25 2 1 2 2 1 28 27 2 20 1 20 PM0521 PM00 Item Part No. Qty. Description 1 0752200 1 Rear Protective Guard, Self Propelled 2 0700 Pin, Cotter.0 x.50 00000 1 Rod 075100 Knob 5 02000 2 Lever, Height Adjustment 02200 Bolt, Round Head Square Neck.1-18 x.2 (12, 1, 1, 1,,, 5) 02200 1 Bolt, Round Head Square Neck.1-18 x.2 (2, 11, ) 7 05200 2 Nut, Locking Center.8-1
WHEELS AND ADJUSTERS Model 2, 12, 1, 1, 1, 11, 0,,, 5, Item Part No. Qty. Description 8 070 2 Handlebar Stud 052800 8 Nut, Locking Center.1-18 (12, 1, 1, 1, 0,,, 5) 052800 Nut, Locking Center.1-18 (2, 11, ) 0500 1 Rear Axle (1, 1, 1, 0,,, ) 070 1 Rear Axle (12) 0221800 1 Bolt, Round Head Square Short Neck.1-18 x 1.00 057200 2 Ring, Retaining External.50 x.02 (1, 0,, ) 057200 Ring, Retaining External.50 x.02 (2, 12, 1, 1,,, 5) 1 000 Washer, Flat Steel.505 x.88 x.072 (2, 12, 1, 1,,, 5) 000 2 Washer, Flat Steel.505 x.88 x.072 (1, 0,, ) 1 071500 1 Wheel, Left Hand Rear (1, 1, 1, 0,,, ) 07151500 1 Wheel, Right Hand Rear (1, 1, 1, 0,,, ) 0700 2 Tire Skin x 2.00 (1, 1, 1, 0,,, ) 07152500 2 Tire, Rear x 1.75 (12) 15 000 2 Spacer Tube 1 0551800 Bushing, Flange. x.50 x. x.88 (2, 12, 1, 1,,, 5) 0551800 2 Bushing, Flange. x.50 x. x.88 (1, 0,, ) 17 05251 1 Rear Quadrant-Left Hand 0551 1 Rear Quadrant-Right Hand 18 07251 1 Bracket, Handlebar Mounting-Right Hand (12, 1, 1, 1, 0,,, 5) 07151 1 Bracket, Handlebar Mounting-Left Hand (12, 1, 1, 1, 0,,, 5) 07751 1 Bracket, Handlebar Mounting-Right Hand (2, 11, ) 077551 1 Bracket, Handlebar Mounting-Left Hand (2, 11, ) 1 05000 Nut, Locking Flanged.1-18 (1, 0,, ) 05000 Nut, Locking Flanged.1-18 (2, 12, 1, 1,,, 5) 20 07100 2 Wheel, Front (1, 1, 1, 0,,, ) 0715200 2 Tire, Front 7 x 1.50 (12) 21 00700 1 Rear Adjuster Bracket-Left Hand 05000 1 Rear Bracket and Bearing Assembly (12, 1, 1, 1, 0,,, 5) 00800 1 Rear Adjuster Bracket-Right Hand (2, 11, ) 00700 1 Rear Adjuster Bracket-Left Hand (2, 11, ) 22 050200 1 Nut, Locking Nylon.1-18 2 000 Washer, Flat Steel.520 x.827 x.02 (2, 12, 1, 1,,, 5) 2 0500 2 Bolt, Hex.1-18 x 1.00 Grade 5 (2, 12, 1, 1,,, 5) 25 020000 2 Lever, Front Height Adjustment (2, 12, 1, 1,,, 5) 2 01800 1 Left Hand Bracket Assembly 00 1 Right Hand Bracket Assembly 27 0800 1 Front Axle (2, 12, 1, 1,,, 5) 28 05051 1 Front Quadrant, Left Hand (2, 12, 1, 1,,, 5) 05151 1 Front Quadrant, Right Hand (2, 12, 1, 1,,, 5) 2 0222000 Bolt, Round Head Square Neck.1-18 x.50 Grade 5 (2, 12, 1, 1,,, 5) 0 051700 1 Bearing, Ball.25 x 1.8 x.50 (2, 11) 1 02751 1 Guard, LM Valve Cover (2, 11)
FRICTION WHEEL AND DRIVE Model 2, 1, 1, 1, 11, 0,,, 5, 8 2 1 15 5 8 8 52 51 1 50 1 8 1 1 2 7 5 7 18 2 20 1 2 25 2 2 21 22 0 28 0 0 1 27 17 2 Drive Carrier Kit 5 2 7 PM0081
FRICTION WHEEL AND DRIVE Item Part No. Qty. Description 1 0570500 1 Ring, Retaining External.8 x.05 2 0700 Screw, Tapping -2 x.50 Hex Washer Head 07150 Screw, Tapping 5 x 0.8 x 1MM 000 1 Bearing Retainer 5 051000 1 Bearing Ball 1.00 x 2.00 x.5 01800 1 Bearing Retainer 7 0017500 1 Bearing Plate 8 05700 1 Drive Actuator Weldment 052700 Nut, Locking Center.25-20 0517500 1 Bearing, Ball.25 x 1.8 x. 022000 1 Gear, Pinion * 051700 2 Bearing, Ball.52 x 1.75 x.7 1 058700 1 Drive Carrier 1 0500 1 Hub, Friction Wheel 15 0700 1 Idler Shaft 1 02800 1 Disc, Friction 17 05700 Bolt, Hex.25-20 x.50 Grade 5 18 05800500 2 Pin, Roll.188 x.88 1 000 1 Shaft, Hex 20 0250 1 Rod, Guide 21 02100 1 Washer, Flat Steel 1.0 x 2.00 x.020 22 0221500 2 Push Nut.25 2 0580500 2 Pin, Roll.5 x.50 2 02200 2 Shift Link 25 0200 1 Shift Arm Weldment 2 025000 1 Retainer Plate 27 50800 1 Kit, LM Drive Carrier (Includes Items 1-2) 28 07200 2 Washer, Flat Steel. x.88 x.05 2 50700 1 Friction Wheel Assembly 0 052800 Nut, Locking Center.1-18 1 00 1 Washer, Flat Steel.8 x.87 x.17 2 02700 1 Friction Sheave * 0550 2 Bearing, Ball.25 x 1.75 x. 020200 1 Washer, Flat Steel 1.02 x 1. x.02 5 02700 1 Spindle, Bearing 027500 1 Bearing, Retainer 7 0220200 1 Bolt, Round Head Square Neck.1-18 x 1.75 Grade 5 8 05700 2 Ring, Retaining External.57 x.0 02200 2 Bolt, Round Head Square Short Neck.1-18 x.2 0 0151 1 Pivot Channel Weldment 1 0825200 1 Spring, Tension.051 x.0 x 2.25 2 50200 1 Differential Assembly 050 1 Retainer * 0508000 1 Bearing, Ball.50 x 1.8 x.7 5 01700 1 Idler Gear 02500 1 Washer, Flat Steel.51 x 1.00 x.0 7 0570200 1 Ring, Retaining External 1.00 x.02 8 000 2 Washer, Flat Steel.520 x.827 x.02 0251 1 Gear Cover 50* 051700 1 Bearing, Ball.25 x 1.8 x.50 51 0570500 1 Ring, Retaining External.8 x.05 52 0700 Screw, Tapping -2 x.50 Hex Washer Head Model 2, 1, 1, 1, 11, 0,,, 5, * Available as individual components or part of 50500 Service Kit which consists of (2) 0550, (1) 0508000, (2) 051700 and (2) 051700. 1
SWIVEL WHEELS AND BRACKETS Model 1, 0,, 2 2 21 22 1 1 2 17 5 1 7 1 20 15 8 1 8 18 15 PM020 Item Part No. Qty. Description 1 085 1 Assembly, Mount Left Hand With Bushings 2 000 1 Pin, Lockout 058000 1 Pin, Roll.0 x.50 08700 1 Spring, Compression - Swivel Lockout 5 0700 1 Washer, Flat Steel.281 x.2 x.05 0755 1 Assembly, Right Hand Mount With Bushings 7 07000 2 Fitting, Lube.25-28 x.25 8 05000 8 Nut, Spin Lock Flange.-18 0222000 Bolt, Round Head Square Neck.1-18 x.50 Grade 5 075 1 Yoke, Left Hand Outer 075 1 Yoke, Right Hand Outer 05800 2 Bolt, Hex.25-20 x.75 Grade 5 1 00800 2 Washer, Locking.25 x.02 Regular 1 0200 2 Washer, Flat Steel.28 x 1.00 x.0 15 000 2 Yoke, Inner 1 08170 2 Pin, Height Adjustment 17 0700001 2 Pin, Bow Tie Locking Cotter 18 055020 2 Bushing, Flange.50 x.25 x.50 x.75 1 055500 2 Spacer, Wheel 20 0200 2 Bolt, Round Head Square Neck.1-18 x 2.75 21 022200 1 Bolt, Round Head Square Neck.25-20 x 1.50 Grade 5 22 0500 1 Nut, Locking Flange.25-20 2 075 1 Bracket, Hood Cable Left Hand 2 0815 1 Bracket, Hood Cable Right Hand 1
ENGINE, BLADE AND BELT Model 2, 12, 1, 1, 1, 11, 0,,, 5, 1 17 2 25 28 2 1 21 22 27 18 2 2 5 2 1 15 2 20 8 7 1 1 PM0051 Item Part No. Qty. Description 1 072170 1 V-Belt L Section 2 052800 1 Bolt, Hex.-1 x 1.50 Grade 5 07100 1 Idler, Flat 1.75 x.7 052800 Nut, Locking Center.1-18 5 07200 1 Washer, Flat Steel. x.88 x.05 05500 1 Bushing, Sleeve. x.75 x. 7 000 1 Idler Arm 8 0551500 1 Bushing, Flange.25 x.501 x.250 x 1.0 057000 1 Bolt, Hex.1-18 x.75 Grade 5 0500 1 Nut, Locking Center.-1 08200 1 Spring, Tension.0 x. x.1 07000 1 Blade, 21" Mower (2, 12, 1, 1, 1, 11) 07700 1 Blade, 21" LM Mulching (,, ) 0700 1 Blade, 21" WBLM (Low Noise) (0, 5) 08200 AR Blade, 21" Mower Tungsten (2, 11) 1 008800 1 Washer, Locking.8 x.0 1 05700 1 Bolt, Hex.8-2 x 2.00 Grade 8 15 01700 1 Washer, Flat Steel.0 x 1.50 x.5 1 0570 1 Recoil Start Handle 17 0828700 1 Engine, Briggs & Stratton.5hp Quantum (1) 08200 1 Engine, Briggs & Stratton.5hp Quantum (Quiet Package) (0, 5) 082700 1 Engine, Briggs and Stratton.75HP Intek OHV Recoil (, ) 08270500 1 Engine, Honda 5.5hp GXV (2, 11) 0820002 1 Engine, Kawasaki.0hp Consumer (12, 1, 1) 08200028 1 Engine, Kawasaki.0hp Commercial () 0820008 1 Engine, Kawasaki.0hp Commercial (01) 18 07200 1 Adapter, Blade 0700 1 Adapter, Blade (2, 11) 1 00000 1 Key, Woodruff.15 x.25 x.25 SAE # (1, 1, 1, 0,,, ) 20 0710 Screw, Tapping.8-1 x 1.00 Hex Washer Head (12, 1, 1, 1, 11, 0,,, 5, ) 21 070 1 Pulley, Sintered Iron (1, 1, 1, 0,,, ) 0700 1 Pulley- Universal Drive- Steel (2, 11) 22 0200 1 Washer, Wave.885 x 1. x.5 (12, 1, 1, 1, 11, 0,,, 5, ) 2 05500 Bolt, Hex.1-2 x 1.50 Grade 5 (2, 11) 2 00800 Washer, Locking.1 x.078 Regular (2, 11) 25 052500 1 Nut, Hex.-2 (2, 11) 2 0500 2 Bolt Hex.1-2 x 1.00 Grade 5 (2, 11) 27 0005500 2 Screw-Set.1-18 x.8 Socket Head (2, 11) 28 07200 1 Washer-Flat-Steel. x.88 x.05 (2, 11) 15
Ariens Company 55 West Ryan Street P.O. Box 157 Brillion, WI 50-0157 20-75-211 Fax 20-75-207 www.ariens.com