Thanks for shopping with Improvements! Hampshire -Door Cabinet Item #5505 To order, call -800-64- West Chester, OH 45069 Made in China PR-6 If you have questions regarding this product, call -800-64- Mon.-Fri. 9:00-5:00 EST (Ohio) and ask for our product specialists, or e-mail: productspecialist@improvementscatalog.com See many more products on the Internet! www.improvementscatalog.com Hampshire -Door Cabinet #5505 Current instructions at www.improvementscatalog.com -800-64- Page of 8
Parts List: A. Top Qty: B. Left Side Qty: C. Right Side Qty: D. Brace Qty: E. Base Qty: F. Back Qty: G. Drawer Side Qty: H. Drawer Back Qty: I. Drawer Front Qty: J. Drawer Bottom Qty: K. Left Door Qty: L. Right Door Qty: M. Shelf Qty: Hampshire -Door Cabinet #5505 Current instructions at www.improvementscatalog.com -800-64- Page of 8
Note: Read these instructions carefully before assembling. Tools required: Phillips screwdriver, flat screwdriver. Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the wood surfaces. Wait to dispose of the packing material until assembly is complete and all parts and hardware are accounted for. Two people might be required for assembly. Assembly Tips Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the parts. Lay out all parts and hardware on the floor or on a table in the order of their number or letter. This will familiarize you with the parts and also help you find a part when you re ready to assemble it. Usually there is a small sticker on the part with the designating letter or number that matches the letter or number in the instructions. If that sticker is missing, look at the drawing in the instruction parts list, and try to recognize the part by its shape or characteristics like holes or grooves. We have provided both text and a drawing in each step, so using both will help the most. Each step assembles only a few parts, so just take it one step at a time. Hardware List:. Cam Bolt Qty: 0. Cam Lock Qty: 0. Dowel Qty: 0 4. Round-Head Screw (½ long) Qty: 8 5. Long Screw ( long) Qty: 8 6. Drawer Stop Qty: 7. Drawer Stop Screw (½ long) Qty: 8. Locking Wheel Qty: 9. Wheel Qty: 0. Wrench Qty:. Hinge Qty: 4. Hinge Screw (½ long) Qty: 4. Shelf Pin Qty: 4 4. Knob Qty: 5. Knob Screw ( / 4 long) Qty: Hampshire -Door Cabinet #5505 Current instructions at www.improvementscatalog.com -800-64- Page of 8
6. Handle Qty: 7. Handle Screw ( long) Qty: 8. Tip-Resistant hardware Qty: set To use Cam Locks. Insert Cam Bolt until snug. Set boards together. Insert Cam Lock 4. Turn Cam Lock clockwise (half a turn) Do not overtighten Note arrow direction If it won t turn halfway, back out the Cam Bolt ½ turn and try Cam Lock again. To assemble: Step Use the Wrench (0) to attach the two Locking Wheels (8) to the Base (E), in the front corners. Attach the two other Wheels (9) to the Base (E), in the back corners. 8 E 0 9 The back edge has a groove Hampshire -Door Cabinet #5505 Current instructions at www.improvementscatalog.com -800-64- Page 4 of 8
Step Use the Drawer Stop Screw (7) to attach the plastic Drawer Stop (6) to the top of the Brace (D). Insert two Cam Bolts () and two Dowels () in the holes of the Sides (B/C). Use two Cam Locks to secure the Brace (D) to the Sides. Item Drawing Qty 7 6 D C B 6 7 Step Insert Cam Bolts () and Dowels () in the holes of the Top (A) and Base (E). Use Cam Locks to secure the Sides (B/C) to the Top (A) and Base (E). A C Item Drawing Qty B 8 8 8 E Hampshire -Door Cabinet #5505 Current instructions at www.improvementscatalog.com -800-64- Page 5 of 8
Step 4 Use Round-Head Screws (4) to attach the Back (F). A 4 F B Step 5 Use four Long Screws (5) to attach the Drawer Sides (G) to the Drawer Back (H). Slide the Drawer Bottom (J) into the grooves of the Drawer Sides and Back. Use four Long Screws (5) to attach the Drawer Front (I) to the Drawer Sides (G). Use two Handle Screws (7) to attach the Handle (6) to the Drawer Front. 5 G H I J G 7 6 Insert the drawer into the unit Hampshire -Door Cabinet #5505 Current instructions at www.improvementscatalog.com -800-64- Page 6 of 8
Step 6 Use Hinges () and Hinge Screws () to attach the Left Door (K) and Right Door (L) to the Sides. Use Knob Screw (5) to attach the Knobs (4) to the Doors. See note below to adjust the Hinges. 5 4 L K If the Doors bump other parts or are not straight, the Hinges can be adjusted in different directions:. Vertically loosen the four Screws three turns, then slide the hinge up or down. First tighten the two screws in the slots, then lightly tighten the other two screws.. Front to back loosen this screw, slide the Hinge forward or backward, and retighten the screw.. Left or right - loosen or tighten this screw on both hinges to move a door left or right. Loosen only one hinge per door to rotate the door. Hampshire -Door Cabinet #5505 Current instructions at www.improvementscatalog.com -800-64- Page 7 of 8
Step 7 Insert Shelf Pins () in the holes at the desired level. Set the Shelf (M) on the Pins. M K Step 8 Use Tip-Resistant Hardware (8) to attach the unit to your wall. THIS HARDWARE, WHEN PROPERLY INSTALLED, CAN PROVIDE PROTECTION AGAINST THE UNEXPECTED TIPPING OF FURNITURE. Note: If you can attach the bracket to the wall so the screw hits the center of a stud, the plastic anchor is not needed. a) Use the small screw to attach the bracket to the back of the unit, near the top edge. b) Place the cabinet in the desired location and make a mark on the wall where the second bracket will be mounted (it should be behind the bracket on the cabinet). Move the cabinet away from the wall. Make a hole in the wall that is slightly smaller than the diameter of the anchor. c) Push the anchor in the hole in the wall. Use the large screw to secure the bracket to the anchor. d) Place the cabinet back in the desired location. Secure the plastic tie through each bracket. b c a d 8 Hampshire -Door Cabinet #5505 Current instructions at www.improvementscatalog.com -800-64- Page 8 of 8