Digital indicator for panel mounting With multi-function input Model DI25

Similar documents
High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals

Analogue temperature transmitter Model T91.10, head mounting version DIN form B Model T91.20, head mounting version form J

Indicator for panel mounting Model

High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals

Digital Temperature Transmitters Model T12.10, Universally Programmable, Head Mounting Model T12.30, Universally Programmable, Rail Mounting

Hand-held temperature calibrator Model CEP3000

High-precision process calibrator Model CED7000

Analogue Temperature Transmitter

HART field temperature transmitter Models TIF50, TIF52, TIF62

Digital Meters With A Multicolour Bargraph LEL-NA3 one-channel LEL-NA5 one-channel LEL-NA6 two-channel

Electronic temperature switch with display Model TSD-30

Resistance thermometer Model TR31, miniature design

Digital temperature transmitter Model T15.H, head mounting version Model T15.R, rail mounting version

Temperature transmitter itemp PCP DIN rail TMT 121

Digital temperature transmitter for resistance sensors Model T15.H, head mounting version Model T15.R, rail mounting version

Resistance thermometer Model TR30, compact design

Air flow meter For ventilation and air-conditioning Model A2G-25

Miniature resistance thermometer Model TR33, thread-mounted

JUMO dtrans T02 Programmable 4-wire Transmitter (Smart Transmitter)

OEM miniature resistance thermometer Models TR31-3 and TR31-K, thread-mounted

Digital Indicator DS 96/48 PK

OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5)

Submersible pressure sensor For water and wastewater Model LW-1

Temperature head transmitter itemp PCP TMT 181

Float switch For industrial applications, plastic version Model RLS-2000

itemp HART DIN rail TMT112

Digital temperature transmitter with HART protocol Model T32.1S, head mounting version Model T32.3S, rail mounting version

Field indicator for current loops with HART communication Models DIH50, DIH52

Submersible pressure sensor For oils and fuels Model LF-1

itemp PA TMT184 Technical information

Intrinsically safe pressure transmitter For applications in hazardous areas Models IS-20-S, IS-21-S, IS-20-F, IS-21-F

Pressure transmitter for general industrial applications Model A-10

Pressure transmitter For general industrial applications Model A-10

OEM miniature resistance thermometer Models TR31-3 and TR31-K, thread-mounted

OEM pressure sensor For industrial applications Models O-10 (T), O-10 (5)

Field indicator for current loops with HART communication Models DIH50, DIH52

Resistance thermometer Model TR30, compact design

SINEAX V 624 Programmable Temperature Transmitter for RTD and TC inputs

JUMO dtrans T02 Programmable 4-wire Transmitter (Smart Transmitter)

High-quality pressure transmitter For general industrial applications Model S-10

Miniature resistance thermometer Explosion-protected version Model TR34, thread-mounted

Resistance thermometer Model TR30, compact design

RMA42. Technical Information

Pressure transmitter for general industrial applications Model A-10

High-quality pressure transmitter For general industrial applications Model S-20

Process transmitter Model UPT-20, with pressure port Model UPT-21, with flush diaphragm

Pressure transmitter For general industrial applications Model A-10

Absolute pressure gauge with output signal For the process industry Models APGT and APGT43.160, NS 100 and 160

Flush pressure transmitter For viscous and solids-containing media Model S-11

Primary-standard resistance thermometry bridge Model CTR9000

Multifunction Intelligent 4-wire Isolated Signal Conditioner

PROGRAMMABLE FIELD TEMPERATURE TRANSMITTER

DSCL, DSCP, SCTP. Industrial Loop Isolators and Transmitters DSCL, DSCP, SCTP. Industrial Loop Isolators and Transmitters

Submersible pressure sensor For superior applications Model LF-1

Gas-actuated combi-thermometer with Pt100 electrical output signal Model 76, stainless steel version

OEM pressure transmitter For mobile working machines Model MH-3

Intrinsically safe pressure transmitter For applications in hazardous areas Models IS-20-S, IS-21-S, IS-20-F, IS-21-F

Ultra high purity transducer, Ex na nl Models WU-20, WU-25 and WU-26

Paperless Recorder PR20

0 2 1 â Ó. itemp HART TMT182. Technical Information

C330 / C330X PC-Programmable Universal, 2-wire Transmitter

Process displays For standard signals, temperature, resistance measurement

Mechatronic pressure measurement. Applications. Special features. Description

Pressure transmitter with flameproof enclosure For applications in explosion-protected areas Models E-10 and E-11

APPENDIX APPENDIX A 1

Plug-in module SIRAX V 606, 1 or 2 channels Programmable Temp. Transmitter for RTD and TC inputs

CompoBus/D-type Digital Controller

OEM miniature resistance thermometer Models TR31-3 and TR31-K, thread-mounted

Intrinsically Safe Pressure Transmitter for highest pressure applications in hazardous environments Model IS-20-H

0 2 1 â Ó. itemp HART TMT182. Technical Information

MCU-10. Display. Adjustments. Analogue Output, Measuring. Analogue Output, Setpoint. Standard Process Signal. LED Indication. LCD Display.

General Specifications

DIGITAL PROGRAM CONTROLLER

DIGEM f 96 x 48 EK. Applications. Description

Analogue Temperature Transmitter Model T24.10, PC configurable, Head Mounting

MICRO-CONTROLLER X (48 48 mm)

v v PMA With numerous functions and robust construction, the KS 3930 A/B line recorders are ideal for universal industrial applications.

SHIMADEN DIGITAL INDICATORS

Technical Information RMA42

General Specifications

SHIMADEN PROGRAM CONTROLLER

MODEL: M2XU MODEL: M2XU [1][2] [3][4]

SHIMADEN DIGITAL INDICATOR

Temperature head transmitter itemp PCP TMT 181

Pressure transmitter For sanitary applications Model SA-11

MCR-T-UI(/NC) MCR-T-UI-E(/NC)

General Specifications

Tension/compression force transducer. With thin film technology up to 100 kn. Models F2301, F23C1, F23S1. Force. Applications.

Level Measurement. Applications. Special features. Description

Temperature head transmitter itemp TC TMT 188

General Specifications

â Ó itemp TC TMT128 Technical information DIN rail mounted Temperature Transmitter for Thermocouples (TC)

General Specifications

SHIMADEN DIGITAL INDICATORS

General Specifications

PROGRAMMABLE CONTROLLER

Light-strip indicator

UNICONT. PMG-400 Universal controller and display unit USER'S AND PROGRAMMING MANUAL 1. pmg4111a0600p_01 1 / 24. ST edition

Analogue temperature controllers

Resistance Thermometers Model Series TR7X0, Sheathed Design

Transcription:

Accessories Digital indicator for panel mounting With multi-function input Model DI25 WIKA data sheet AC 80.02 Applications Plant construction Machine tools Plastics technology and processing Ventilation and air-conditioning General industrial applications Special features Multi-function input for current and voltage signals as well as thermocouples and resistance thermometers Ingress protection IP66 (at the front) Two or three freely programmable alarm outputs as standard (depending on the instrument version) 4... 20 ma analogue output signal as standard HOLD function Digital indicator model DI25 Description The model DI25 digital indicator is a multi-function, competitively priced instrument for a wide variety of measuring tasks. The multi-function input has 18 different input configurations, which can be selected via the rear connections and also by selection of the appropriate input signal within the instrument configuration. In this way it is possible to connect both transmitters with current or voltage signals and resistance thermometers or thermocouples to the same instrument. The basic version of the DI25 indicator features three alarm outputs. Instruments with the optional DC 24 V transmitter power supply have two alarm outputs available. With the high IP66 ingress protection at the front, the DI25 digital indicator is also suitable for use under harsh environmental conditions. All configuration and programming can be carried out through the front-panel keys. The measured values can be retransmitted for further processing via an analogue output signal (4... 20 ma). WIKA data sheet AC 80.02 05/2018 Page 1 of 6

Indication Principle 7-segment LED Actual value display (PV display) 4 ½-digit, red, character size 16 mm Set value display (SV display) 4 ½-digit, green, character size 10 mm Indication range -2000... 10000 Input Number and type 1 x multi-function input for resistance thermometers, thermocouples and standard signals Input configuration Selectable via terminal connections and menu-driven programming Resistance thermometers Pt100, JPt100, 3-wire, max. permissible resistance per connection lead: 10 Ω Thermocouples Types K, J, R, S, E, T, N, PL-II, C (W/Re5-26): max. permissible external resistance: 100 Ω Type B: max. permisible external resistance: 40 Ω Standard signals (DC) 0... 20 ma, 4... 20 ma: Input resistance 50 Ω, max. 50 ma DC 0... 1 V: Input resistance > 1 MΩ, max. 5 V DC, max. internal resistance of voltage source: 2 kω 0... 5 V, 1... 5 V, 0... 10 V: Input resistance > 100 kω, max. 15 V DC, max. internal resistance of voltage source: 100 Ω Measuring time 125 ms Analogue output Output signal 4... 20 ma, load 550 Ω Voltage supply Power supply AC 100... 240 V (permissible voltage: AC 85... 264 V), 50/60 Hz AC/DC 24 V (permissible voltage: AC/DC 20... 28 V), 50/60 Hz Power consumption max. 10 VA Insulation resistance min. 10 MΩ for DC 500 V Electrical connection Screw terminals Switching output Number and type 2 switch contacts (relays) 1) 3 switch contacts (relays) 1) Instruments with integrated transmitter power supply do not feature the alarm output 2. Alarm types of switching outputs High alarm High alarm with standby Low alarm Low alarm with standby High-low alarm (only for switch contact 3) Switch behaviour Normally closed or normally open, can be set via keyboard Load capacity AC 250 V, 3 A (resistive load) Switching cycles max. 100,000 Hysteresis Adjustable Thermocouples and resistance thermometers: 0.1... 1,000 C Standard signals: 1... 1,000 (with a scaling of the input with one decimal point, this is taken over by the hysteresis). HOLD function Selectable: Instantaneous/minimum or maximum value Activation of the HOLD function via connection terminals Accuracy ±0.3 % of the output span Transmitter power supply (option) DC 24 V ± 3V, max. 30 ma WIKA data sheet AC 80.02 05/2018 Page 2 of 6

Case Material Polycarbonate, black Ingress protection (per IEC/EN 60529) Front: IP66 Read: IP00 Dimensions 96 x 48 x 110 mm Permissible ambient conditions Operating temperature 0... 50 C Storage temperature -20... +50 C Relative humidity 35... 85 % r. h. annual mean without condensation Weight approx. 300 g Mounting Screw-type mounting bracket for wall thicknesses from 1... 8 mm Accuracy/measuring errors of the input signals Input signals Measuring span Measuring error in % of the span Standard Exception Current signals 0... 20 ma -2000... 10000 ±0.2 % ±1 digit - 4... 20 ma -2000... 10000 ±0.2 % ±1 digit - Voltage signals 0... 1 V -2000... 10000 ±0.2 % ±1 digit - 0... 5 V -2000... 10000 ±0.2 % ±1 digit - 1... 5 V -2000... 10000 ±0.2 % ±1 digit - 0... 10 V -2000... 10000 ±0.2 % ±1 digit - Thermocouples Type K, NiCr-Ni -200... +1,370 C -320... +2,500 F ±0.2 % ±1 digit 0 C: ±0.4 % ±1 digit -199.9... +400.0 C -199.9... +750.0 F ±2 K 0 C: ±0.4 % ±1 digit Type J, Fe-CuNi -200... +1,000 C -320... +1,800 F ±0.2 % ±1 digit 0 C: ±0.4 % ±1 digit Type R, PtRh-Pt 0... 1,760 C 0... 3,200 F ±0.2 % ±1 digit 200 C: ±6 K Type S, PtRh-Pt 0... 1,760 C 0... 3,200 F ±0.2 % ±1 digit 200 C: ±6 K Type B, PtRh-PtRh 0... 1,820 C 0... 3,300 F ±0.2 % ±1 digit 300 C: without details Type E, NiCr-CuNi -200... +800 C -320... +1,500 F ±0.2 % ±1 digit 0 C: ±0.4 % ±1 digit Type T, Cu-CuNi -199.9... +400.0 C -199.9... +750.0 F ±2 K 0 C: ±0.4 % ±1 digit Type N, NiCrSi-NiSI -200... +1,300 C -320... +2,300 F ±0.2 % ±1 digit 0 C: ±0.4 % ±1 digit Type PL-II 0... 1,390 C 0... 2,500 F ±0.2 % ±1 digit - Type C (W/Re5-26) 0... 2,315 C 0... 4,200 F ±0.2 % ±1 digit - Resistance thermometers Pt100 (3-wire) -200... +850 C -300... +1500 F ±0.1 % ±1 digit - -199.9... +850.0 C -199.9... +999.9 F ±0.1 % ±1 digit - JPt100 (3-wire) -200... +500 C -300... +900 F ±0.1 % ±1 digit - -199.9... +500.0 C -199.9... +900.0 F ±1 K - WIKA data sheet AC 80.02 05/2018 Page 3 of 6

Terminal assignment Terminal Case labelling Meaning 1 GND Ground 2 AC 100... 240 V Power supply AC/DC 24 V (+) 3 AC 100... 240 V AC/DC 24 V (-) 4 Not connected 5 TRANSMIT OUTPUT + Analogue output signal 6 TRANSMIT OUTPUT - 7 A1 Alarm output 1; AC 250 V, 3 A 8 A1 9 A2 Alarm output 2; AC 250 V, 3 A P24 (+) {Positive transmitter power supply U+, DC 24 V, 30 ma} 10 A2 Alarm output 2; AC 250 V, 3 A P24 (-) {Negative transmitter power supply U-, DC 24 V, 30 ma} 11 Not connected 12 A3 Alarm output 3; AC 250 V, 3 A 13 A3 14 EVENT INPUT Event input 15 EVENT INPUT Event input 16 EVENT INPUT Event input 17 EVENT INPUT Event input 18 + Input signal TC, DC V and DC ma (shunt activatable) A Input signal RTD 19 - Input signal TC, DC V and DC ma (shunt activatable) B Input signal RTD 20 B Input signal RTD Items in curved brackets are optional extras for an additional price. RTD TC DC ma DC V Resistance thermometers Thermocouples Current signals Voltage signals WIKA data sheet AC 80.02 05/2018 Page 4 of 6

Dimensions in mm Sealing Screw-type mounting bracket 48 96 11.5 98.5 106.2 Panel cutout in mm 45 +0.5 0 +0.8 92 0 Approvals Logo Description Country EU declaration of conformity EMC directive EN 61326 emission (group 1, class B) and interference immunity (industrial application) Low voltage directive RoHS directive European Union Approvals and certificates, see website WIKA data sheet AC 80.02 05/2018 Page 5 of 6

Order number Power supply Transmitter power supply Order number AC 100 240 V - 7148465 DC 24 V 7148482 AC/DC 24 V - 7394245 DC 24 V 7394270 Scope of delivery Digital indicator model DI25 Sealing Operating instructions Label for units Mounting set for screw-type mounting bracket Accessories Description Order number Precision measurement shunt (50 Ω) 2087604 Ordering information To order the described product the order number is sufficient. Other options require additional specification. 2004 WIKA Alexander Wiegand SE & Co. KG, all rights reserved. The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. 05/2018 EN WIKA data sheet AC 80.02 05/2018 Page 6 of 6 WIKA Alexander Wiegand SE & Co. KG Alexander-Wiegand-Straße 30 63911 Klingenberg/Germany Tel. +49 9372 132-0 Fax +49 9372 132-406 info@wika.de www.wika.de