TCUT135X1 Subminiature Dual Channel Transmissive Optical Sensor with Phototransistor Outputs 19534 DESCRIPTION The TCUT135X1 is a compact transmissive sensor that includes an infrared emitter and two phototransistor detectors, located face-to-face in a surface mount package. TCUT135X1 is especially designed to meet high operating temperature requirements and is released for operating temperature ranges from - 4 C to + 125 C. E E Coll. Pin connection top view Cath. NC A 21847 FEATURES Package type: surface mount Detector type: phototransistor Dimensions (L x W x H in mm): 5.5 x 4 x 4 AEC-Q11 qualified Gap (in mm): 3 Aperture (in mm):.3 Channel distance (center to center):.8 mm Typical output current under test: I C = 1.6 ma Emitter wavelength: 95 nm Released for high operating temperatures up to 125 C Lead (Pb)-free soldering released Moisture sensitivity level (MSL): 1 Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Automotive optical sensors Accurate position sensor for encoder Sensor for motion, speed and direction PRODUCT SUMMARY PART NUMBER GAP WIDTH (mm) Note Conditions like in table basic characteristics/coupler APERTURE WIDTH (mm) TYPICAL OUTPUT CURRENT UNDER TEST (1) (ma) DAYLIGHT BLOCKING FILTER INTEGRATED TCUT135X1 3.3 1.6 No ORDERING INFORMATION ORDERING CODE PACKAGING VOLUME (1) REMARKS TCUT135X1 Tape and reel MOQ: 2 pcs, 2 pcs/reel Drypack, MSL 1 Note MOQ: minimum order quantity Rev. 1., 14-Mar-13 1 Document Number: 84816 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91
TCUT135X1 ABSOLUTE MAXIMUM RATINGS (T amb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT COUPLER Total power dissipation T amb 125 C P tot 37.5 mw Junction temperature T j 14 C Ambient temperature range T amb - 4 to + 125 C Storage temperature range T stg - 4 to + 125 C Soldering temperature In accordance with fig. 16 T sd 26 C INPUT (EMITTER) Reverse voltage V R 5 V Forward current T amb 125 C 25 ma Forward surge current t p 1 μs SM 2 ma Power dissipation T amb 125 C P V 37.5 mw OUTPUT (DETECTOR) Collector emitter voltage V CEO 2 V Emitter collector voltage V ECO 7 V Collector current I C 2 ma Collector dark current T amb 85 C, V CE = 5 V I CEO 3.3 μa ABSOLUTE MAXIMUM RATINGS 4 3 P V - Power Dissipation (mw) 35 3 25 2 15 1 5 R thja = 46 K/W - Forward Current (ma) 25 2 15 1 5 R thja = 46 K/W 2 4 6 8 1 12 14 T amb - Ambient Temperature ( C) 2 4 6 8 1 12 14 T amb - Ambient Temperature ( C) Fig. 1 - Power Dissipation Limit vs. Ambient Temperature Fig. 2 - Forward Current Limit vs. Ambient Temperature Rev. 1., 14-Mar-13 2 Document Number: 84816 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91
TCUT135X1 ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT COUPLER Collector current per channel V CE = 5 V, = 15 ma I C.7 1.6 ma Collector emitter saturation voltage = 15 ma, I C =.2 ma V CEsat.4 V INPUT (EMITTER) Forward voltage = 15 ma V F 1 1.2 1.4 V Reverse current V R = 5 V I R 1 μa Junction capacitance V R = V, f = 1 MHz C j 25 pf OUTPUT (DETECTOR) Collector emitter voltage I C I C = 1 ma V CEO 2 V Emitter collector voltage I E = 1 μa V ECO 7 V Collector dark current V CE = 25 V, = A, E = lx I CEO 1 1 na SWITCHING CHARACTERISTICS Rise time Fall time I C =.7 ma, V CE = 5 V, R L = 1 (see fig. 3) I C =.7 ma, V CE = 5 V, R L = 1 (see fig. 3) t r 9 15 μs t f 16 15 μs 2688 R G = 5 Ω t p T = 2 t p = 1 ms 5 Ω 1 Ω + 5 V I C adjusted by Channel I Channel II Oscilloscope R L 1 MΩ C L 2 pf Fig. 3 - Test Circuit for t r and t f Fig. 4 - Switching Times I C 1 % 9 % 1 % t p t d t r t on (= t d + t r ) t r t d t on t p Pulse duration Delay time Rise time Turn-on time t s t f t off t s t f t off (= t s + t f ) t t Storage time Fall time Turn-off time 96 11698 BASIC CHARACTERISTICS (T amb = 25 C, unless otherwise specified) 1 1.4 - Forward Current (ma) 1 V F - Forward Voltage (V) 1.3 1.2 1.1 1 1..8.9 1. 1.1 1.2 1.3 1.4 1.5 1.6-5 - 25 25 5 75 1 125 15 2589 V F - Forward Voltage (V) 2268 T amb - Ambient Temperature ( C) Fig. 5 - Forward Current vs. Forward Voltage Fig. 6 - Forward Voltage vs. Ambient Temperature Rev. 1., 14-Mar-13 3 Document Number: 84816 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91
TCUT135X1 1 2.5 V CE = 5 V I C - Collector Current (ma) 22681 1.1.1 V CE = 5 V 1 1 1 - Forward Current (ma) Fig. 7 - Collector Current vs. Forward Current I C - Collector Current (ma) 2. = 15 ma 1.5 1. = 5 ma.5. - 5-25 25 5 75 1 125 15 22684 T amb - Ambient Temperature ( C) Fig. 1 - Collector Current vs. Ambient Temperature 1 1 I C - Collector Current (ma) 1.1 = 25 ma = 15 ma = 5 ma = 3 ma I CEO - Collector Dark Current (na) 1 1 1 1 V CE = 7 V V CE = 25 V V CE = 5 V.1.1 1 1 1 22682 V CE - Collector Emitter Voltage (V) 22685 1-5 - 25 25 5 75 1 125 15 T amb - Ambient Temperature ( C) Fig. 8 - Collector Current vs. Collector Emitter Voltage Fig. 11 - Collector Dark Current vs. Ambient Temperature V CEsat - Coll. Emitter Saturation Voltage (V) 22683.3.25.2.15.1.5 I C = 2 μa = 5 ma = 15 ma. - 5-25 25 5 75 1 125 15 T amb - Ambient Tempearture ( C) Fig. 9 - Collector Emitter Saturation Voltage vs. Ambient Temperature I C rel - Relative Collector Current 1 S.8.6.4.2-1.5-1 -.5.5 1 1.5 2595 S - Horizontal Displacement (mm) Fig. 12 - Relative Collector Current vs. Horizontal Displacement Rev. 1., 14-Mar-13 4 Document Number: 84816 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91
I Crel - Rel. Collector Current 1.5 www.vishay.com 1 ±.2 S Optical axis - 1.5-1 -.5.5 1 1.5 261 S - Vertical Displacement (mm) Fig. 13 - Relative Collector Current vs. Vertical Displacement REFLOW SOLDER PROFILE Temperature ( C) 3 25 2 15 1 5 TCUT135X1 255 C 24 C 217 C max. 12 s max. ramp up 3 C/s max. 26 C 245 C max. 3 s max. 1 s max. ramp down 6 C/s 5 1 15 2 25 3 19841 Time (s) Fig. 16 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-2 t r /t f - Rise/Fall Time (µs) 1 9 8 7 R L = 1 Ω 6 5 4 t f 3 t r 2 1 25 5 75 1 125 15 175 2 2599 I C - Collector Current (µa) FLOOR LIFE Level 1, acc. JEDEC, J-STD-2. No time limit. Fig. 14 - Rise/Fall Time vs. Collector Current = 15 ma + V C = 5 V 74HCT14 1 kω V E U Q GND 13887 Fig. 15 - Application example Rev. 1., 14-Mar-13 5 Document Number: 84816 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91
TCUT135X1 PACKAGE DIMENSIONS in millimeters 19536 Rev. 1., 14-Mar-13 6 Document Number: 84816 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91
TCUT135X1 PACKAGE DIMENSIONS in millimeters Volume/reel = 2 pcs 2611 Rev. 1., 14-Mar-13 7 Document Number: 84816 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91
Packaging and Ordering Information Packaging and Ordering Information PART NUMBER MOQ (1) PCS PER TUBE Notes (1) MOQ: minimum order quantity (2) Please refer to datasheets TUBE SPECIFICATION FIGURES TUBE SPEC. (FIGURE) CONSTITUENTS (FORMS) CNY7 4 8 1 28 TCPT13X1 2 Reel (2) 29 TCRT1 1 Bulk - 26 TCRT11 1 Bulk - 26 TCRT5 45 5 2 27 TCRT5L 24 48 3 27 TCST13 52 65 5 24 TCST13L 26 65 6 24 TCST113 12 85 4 24 TCST122 12 85 4 24 TCST123 48 6 7 24 TCST13 12 85 4 24 TCST213 12 85 4 24 TCST222 12 85 4 24 TCST23 12 85 4 24 TCST525 486 3 8 24 TCUT13X1 2 Reel (2) 29 TCZT82-PAER 25 Bulk - 22 15198 Fig. 1 Document Number: 8112 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com Rev. 1.1, 2-Jul-9 1
Packaging and Ordering Information Packaging and Ordering Information 1521 Fig. 2 1521 Fig. 3 www.vishay.com For technical questions, contact: optocoupleranswers@vishay.com Document Number: 8112 2 Rev. 1.1, 2-Jul-9
Packaging and Ordering Information Packaging and Ordering Information 15199 Fig. 4 Fig. 5 1522 Document Number: 8112 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com Rev. 1.1, 2-Jul-9 3
Packaging and Ordering Information Packaging and Ordering Information 15196 Fig. 6 15195 Fig. 7 www.vishay.com For technical questions, contact: optocoupleranswers@vishay.com Document Number: 8112 4 Rev. 1.1, 2-Jul-9
Packaging and Ordering Information Packaging and Ordering Information 2257 Fig. 8 Document Number: 8112 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com Rev. 1.1, 2-Jul-9 5
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 217 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 8-Feb-17 1 Document Number: 91