Automotive N-Channel 60 V (-S) 75 C MOSFET PROUCT SUMMARY V S (V) 60 R S(on) (Ω) at V GS = 0 V 20 R S(on) (Ω) at V GS = 4.5 V 50 I (A).7 Configuration Single Package SC-70 6 SOT-363 SC-70 Single (6 leads) S 4 5 FEATURES TrenchFET power MOSFET AEC-Q0 qualified d 00 % R g and UIS tested Material categorization: for definitions of compliance please see www.vishay.com/doc?9992 G Marking Code: 9O Top View 2 3 G S N-Channel MOSFET ABSOLUTE MAXIMUM RATINGS (T C = 25 C, unless otherwise noted) PARAMETER SYMBOL LIMIT UNIT rain-source Voltage V S 60 Gate-Source Voltage V GS ± 20 V Continuous rain Current a T C = 25 C.7 I T C = 25 C.7 Continuous Source Current (iode Conduction) a I S.7 A Pulsed rain Current b I M 6.7 Single Pulse Avalanche Current I AS 0 L = mh Single Pulse Avalanche Energy E AS 5 mj Maximum Power issipation b T C = 25 C 3.3 P T C = 25 C. W Operating Junction and Storage Temperature Range T J, T stg -55 to +75 C THERMAL RESISTANCE RATINGS PARAMETER SYMBOL LIMIT UNIT Junction-to-Ambient PCB Mount c R thja 25 Junction-to-Foot (rain) R thjf 45 C/W Notes a. Package limited. b. Pulse test; pulse width 300 μs, duty cycle 2 %. c. When mounted on " square PCB (FR4 material). d. Parametric verification ongoing. S5-2365 Rev. A, 2-Oct-5 ocument Number: 65884
Zero Gate Voltage rain Current I SS SPECIFICATIONS (T C = 25 C, unless otherwise noted) PARAMETER SYMBOL TEST CONITIONS MIN. TYP. MAX. UNIT Static rain-source Breakdown Voltage V S V GS = 0 V, I = 250 μa 60 - - Gate-Source Threshold Voltage V GS(th) V S = V GS, I = 250 μa.5 2 2.5 V Gate-Source Leakage I GSS V S = 0 V, V GS = ± 20 V - - ± 00 na V GS = 0 V V S = 60 V, T J = 25 C - - 50 μa V GS = 0 V V S = 60 V - - V GS = 0 V V S = 60 V, T J = 75 C - - 50 On-State rain Current a I (on) V GS = 0 V V S 5 V 0 - - A V GS = 0 V I = 3.8 A - 0.085 20 rain-source On-State Resistance a R S(on) V GS = 0 V I = 3.8 A, T J = 25 C - - 0.200 V GS = 0 V I = 3.8 A, T J = 75 C - - 0.240 Ω V GS = 4.5 V I = 3. A - 0.095 50 Forward Transconductance b g fs V S = 5 V, I =.8 A - 6 - S ynamic b Input Capacitance C iss - 275 344 Output Capacitance C oss V GS = 0 V V S = 5 V, f = MHz - 34 42 pf Reverse Transfer Capacitance C rss - 3 7 Total Gate Charge c Q g - 4.4 5.5 Gate-Source Charge Q gs V GS = 0 V V S = 30 V, I = 3.8 A - 0.7 - nc Gate-rain Charge c Q gd -.3 - Gate Resistance R g f = MHz 2. 4. 6.2 Ω Turn-On elay Time c t d(on) - 5.8 7.3 Rise Time c t r V = 30 V, R L = 3.9 Ω - 23 29 Turn-Off elay Time c t d(off) I 3.8 A, V GEN = 0 V, R g = Ω - 0 3 ns Fall Time c t f - 30 39 Source-rain iode Ratings and Characteristics b Pulsed Current a I SM - - A Forward Voltage V S I F =.8 A, V GS = 0 V - 0.8.2 V Notes a. Pulse test; pulse width 300 μs, duty cycle 2 %. b. Guaranteed by design, not subject to production testing. c. Independent of operating temperature. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S5-2365 Rev. A, 2-Oct-5 2 ocument Number: 65884
TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) 5 5 V GS = 0 V thru 4 V 2 2 I - rain Current (A) 9 6 V GS = 3 V I - rain Current (A) 9 6 T C = 25 C 3 V GS = 2 V V GS = V 3 T C = 25 C T C = - 55 C 0 0 2 3 4 5 0 0 2 4 6 8 0 V S -rain-to-source Voltage (V) V GS - Gate-to-Source Voltage (V) Output Characteristics Transfer Characteristics 5 80 I = 0 ma g fs -Transconductance (S) 2 9 6 3 T C = 25 C T C = - 55 C T C = 25 C V S -rain-to-source Voltage (V) 76 72 68 64 0 0 2 3 4 5 I - rain Current (A) Transconductance 60-50 - 25 0 25 50 75 00 25 50 75 T J - Junction Temperature ( C) rain Source Breakdown vs. Junction Temperature 500 0.25 400 0.20 C - Capacitance (pf) 300 200 00 C iss R S(on) -On-Resistance (Ω) 5 0 0.05 V GS = 4.5 V V GS = 0 V C oss C rss 0 0 5 30 45 60 V S -rain-to-source Voltage (V) Capacitance 0.00 0 3 6 9 2 5 I - rain Current (A) On-Resistance vs. rain Current S5-2365 Rev. A, 2-Oct-5 3 ocument Number: 65884
TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) V GS - Gate-to-Source Voltage (V) 0 8 6 4 2 I = 3.8 A V S = 30 V R S(on) -On-Resistance (Ω) 0.5 0.4 0.3 0.2 T J = 50 C T J = 25 C 0 0.0.0 2.0 3.0 4.0 5.0 Q g -Total Gate Charge (nc) Gate Charge 0.0 0 2 4 6 8 0 V GS - Gate-to-Source Voltage (V) On-Resistance vs. Gate-to-Source Voltage 0.5 0 V GS(th) Variance (V) 0.2 - - 0.4-0.7 I = 250 μa I = 5 ma I S - Source Current (A) 0.0 T J = 50 C T J = 25 C -.0-50 - 25 0 25 50 75 00 25 50 75 T J - Temperature ( C) Threshold Voltage 0.00 0.0 0.2 0.4 0.6 0.8.0.2 V S - Source-to-rain Voltage (V) Source rain iode Forward Voltage 2.5 2.5 R S(on) -On-Resistance (Normalized) 2..7.3 0.9 I = 3.4 A V GS = 0 V V GS = 4.5 V R S(on) -On-Resistance (Normalized) 2..7.3 0.9 I = 4.2 A V GS = 0 V V GS = 4.5 V 0.5-50 - 25 0 25 50 75 00 25 50 75 T J - Junction Temperature ( C) On-Resistance vs. Junction Temperature 0.5-50 - 25 0 25 50 75 00 25 50 75 T J - Junction Temperature ( C) On-Resistance vs. Junction Temperature S5-2365 Rev. A, 2-Oct-5 4 ocument Number: 65884
THERMAL RATINGS (T A = 25 C, unless otherwise noted) 00 0 I M Limited I - rain Current (A) Limited by R S(on) * 00 μs ms 0 ms 00 ms BVSS Limited s, 0 s, C T C = 25 C Single Pulse 0.0 0.0 0 V S -rain-to-source Voltage (V) 00 * V GS > minimum V GS at which R S(on) is specified Safe Operating Area 2 Normalized Effective Transient Thermal Impedance uty Cycle = 0.5 0.2 0.05 0.02 3. T JM - T A = P M Z (t) thja Single Pulse 4. Surface Mounted 0.0 0-4 0-3 0-2 0-0 00 600 Square Wave Pulse uration (s) Notes: P M Normalized Thermal Transient Impedance, Junction-to-Ambient t t 2 t. uty Cycle, = t 2 2. Per Unit Base = R thja = 25 C/W S5-2365 Rev. A, 2-Oct-5 5 ocument Number: 65884
THERMAL RATINGS (T A = 25 C, unless otherwise noted) 2 Normalized Effective Transient Thermal Impedance uty Cycle = 0.5 0.2 0.05 0.02 Single Pulse 0.0 0-4 0-3 0-2 0-0 Square Wave Pulse uration (s) Normalized Thermal Transient Impedance, Junction-to-Foot Note The characteristics shown in the two graphs - Normalized Transient Thermal Impedance Junction-to-Ambient (25 C) - Normalized Transient Thermal Impedance Junction-to-Foot (25 C) are given for general guidelines only to enable the user to get a ball park indication of part capabilities. The data are extracted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part mounted on printed circuit board - FR4, size " x " x 0.062", double sided with 2 oz. copper, 00 % on both sides. The part capabilities can widely vary depending on actual application parameters and operating conditions. maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?65884. S5-2365 Rev. A, 2-Oct-5 6 ocument Number: 65884
Ordering Information SC-70 Ordering codes for the SQ rugged series power MOSFETs in the SC-70 package: ATASHEET PART NUMBER OL ORERING COE a NEW ORERING COE SQ42EEH SQ42EEH-T-GE3 SQ42EEH-T_GE3 SQ43EH SQ43EH-T-GE3 SQ43EH-T_GE3 - -T_GE3 SQ470AEH - SQ470AEH-T_GE3 SQ539EH - SQ539EH-T_GE3 SQ563AEH - SQ563AEH-T_GE3 SQ902AEL - SQ902AEL-T_GE3 SQ92AEEH - SQ92AEEH-T_GE3 Note a. Old ordering code is obsolete and no longer valid for new orders Revision: 06-Oct-5 ocument Number: 65839
Package Information 6 5 4 2 3 e b e E E -B- -A- A 2 A c L im Min Nom Max Min Nom Max A 0.90.0 0.035 0.043 A 0 0.004 A 2 0.80.00 0.03 0.039 b 5 0.30 0.006 0.02 c 0 0.25 0.004 0.00.80 2.00 2.20 0.07 0.079 0.087 E.80 2.0 2.40 0.07 0.083 0.094 E.5.25.35 0.045 0.049 0.053 e 0.65BSC 0.026BSC e.20.30.40 0.047 0.05 0.055 L 0 0.20 0.30 0.004 0.008 0.02 7 Nom 7 Nom A ECN: S-03946 Rev. B, 09-Jul-0 WG: 5550 ocument Number: 754 06-Jul-0 www.vishay.com
Application Note 826 RECOMMENE MINIMUM PAS FOR SC-70: 6-Lead 0.067 (.702) APPLICATION NOTE 0.096 (2.438) 0.045 (.43) 0.026 (0.648) 0.06 (0.406) 0.026 (0.648) 0.00 (0.24) Recommended Minimum Pads imensions in Inches/(mm) Return to Index Return to Index www.vishay.com ocument Number: 72602 8 Revision: 2-Jan-08
Legal isclaimer Notice Vishay isclaimer ALL PROUCT, PROUCT SPECIFICATIONS AN ATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR ESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under irective 20/65/EU of The European Parliament and of the Council of June 8, 20 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS irective 2002/95/EC. We confirm that all the products identified as being compliant to irective 2002/95/EC conform to irective 20/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 6249-2-2 definition. We confirm that all the products identified as being compliant to IEC 6249-2-2 conform to JEEC JS709A standards. Revision: 02-Oct-2 ocument Number: 9000