NEW! MMIC REFLECTIONLESS FILTERS 50Ω DC to 21 GHz The Big Deal Patented design eliminates in band spurs Pass band cut-off up to 21 GHz Stop band up to 35 GHz Excellent repeatability through IPD* process XBF XLF XHF X-Series Available in Low Pass, High Pass and Band Pass designs Product Overview Mini-Circuits X-Series reflectionless filters employs a novel filter topology which absorbs and terminates stop band signals internally rather than reflecting them back to the source. This new capability enables unique applications for filter circuits beyond those suited to traditional approaches. Traditional filters are reflective in the stop band, sending signals back to the source at 100% of the power level which interact with neighboring components and often result in intermodulation and other interferences. Reflectionless filters eliminate stop band reflections, allowing them to be paired with sensitive devices and used in applications that otherwise require circuits such as isolation amplifiers or attenuators. Key Features Easy integration with sensitive reflective components, e.g. mixers, multipliers Enables stable integration of wideband amplifiers Cascadable Excellent power handling in a tiny surface mount device Small size, 3x3mm QFN Excellent repeatability of RF performance Excellent stability over temperature Operating temperature up to 105 C Advantages Reflectionless filters absorb unwanted signals, preventing reflections back to the source. This reduces generation of additional unwanted signals without the need for extra components like attenuators, improving system dynamic range and saving board space. Because reflectionless filters maintain good impedance in the stop band; they can be integrated with high gain, wideband amplifiers without the risk of creating instabilities in these out of band regions. Reflectionless filters can be cascaded in multiple sections to provide sharper and higher attenuation, while also preventing any standing waves that could affect pass band signals. High power handling extends the usability of these filters to the transmit path for inter-stage filtering. Allows replacement of filter/attenuator pairs with a single reflectionless filter, saving board space. Through semiconductor IPD process, X-series filters are inherently repeatable for large volume production. With ±0.3 db variation over temperature ideal for use in wide temperature range applications without the need for additional temperature compensation. Suitable for operation close to high power components. *IPD Integrated Passive Device, is a GaAs semiconductor process Page 1 of 5
Reflectionless Bandpass Filter 50Ω 2350 to 3150 MHz Features Match to 50Ω in the stop band, eliminates undesired reflections Cascadable Excellent Power handling Temperature stable, up to 105 C Small size, 3 x 3 mm Protected by US Patent No. 8,392,495 Applications Wi-Fi WiMax Bluetooth Satellite CASE STYLE: DQ1225 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Available Tape and Reel at no extra cost Reel Size Devices/Reel 7 20, 50, 100, 200, 500, 1000, 2000 General Description Mini-Circuits reflectionless filter employs a novel filter topology which absorbs and terminates stop band signals internally rather than reflecting them back to the source. This new capability enables unique applications for filter circuits beyond those suited to traditional approaches. Traditional filters are reflective in the stop band, sending signals back to the source at 100% of the power level. These reflections interact with neighboring components and often result in inter-modulation and other interferences. Reflectionless filters eliminate stop band reflections, allowing them to be paired with sensitive devices and used in applications that otherwise require circuits such as isolation amplifiers or attenuators. simplified schematic and pad description NC NC NC 12 11 10 1 9 RF-IN 2 8 RF-OUT 3 7 4 5 6 NC NC NC Function Pad Number RF-IN 2 RF Input Pad RF-OUT 8 RF Output Pad 1,3,7,9, Paddle Connected to ground NC ( Externally) 4,5,6,10,11,12 No internal connection Description REV. A M160317 ED-15042924 MY/CP/AM 170213 Page 2 of 5
MMIC Reflectionless Filter Electrical Specifications 1 at 25 C Parameter F# Frequency (MHz) Min. Typ. Max. Unit Insertion Loss F2-F3 2350-3150 3.2 3.6 db Pass Band F2-F3 2350-3150 1.2 :1 Stop Band, Lower Rejection DC-F1 DC - 1810 12 15 db DC-F1 DC - 1810 1.2 :1 Stop Band, Upper Rejection 1 Measured on Mini-Circuits Characterization Test Board TB-844-282B+ Absolute Maximum Ratings 4 Parameter Operating Temperature Storage Temperature F4-F5 3800-9500 12 15 F5-F6 9500-20000 20 F4-F5 3800-9500 1.2 F5-F6 9500-20000 1.5 Ratings -55 C to +105 C -65 C to +150 C RF Power Input, Passband (F2-F3) 2 2W at 25 C RF Power Input, Stopband (DC-F2, F3-F6) 3 0.5W at 25 C 2 Passband rating derates linearly to 1W at 105 C ambient 3 Stopband rating derates linearly to 0.25W at 105 C ambient 4 Permanent damage may occur if any of these limits are exceeded. DC F1 F2 F3 F4 F5 ESD rating Human body model (HBM): Class 2(2000 to <4000 V) in accordance with ANSI/ESD 5.1-2001 MSL rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D INSERTION LOSS (db) Specification Definition db :1 F6 Frequency (MHz) Typical Performance Data at 25 C Insertion Loss (db) (:1) 10 44.12 1.04 50 39.26 1.04 100 35.00 1.05 200 29.51 1.07 400 23.66 1.11 1000 16.34 1.26 1810 16.16 1.23 2350 2.50 1.20 3150 3.10 1.04 3800 15.35 1.25 5000 15.22 1.19 6500 17.66 1.10 8000 19.49 1.10 9500 17.03 1.34 11000 20.26 1.29 13000 22.61 1.37 15000 20.73 1.40 17000 18.99 1.28 19000 18.32 1.82 20000 18.66 2.59 50 INSERTION LOSS 3.0 INSERTION LOSS (db) 40 30 20 10 0 0 4000 8000 12000 16000 20000 2.5 2.0 1.5 1.0 0 4000 8000 12000 16000 20000 Page 3 of 5
MMIC Reflectionless Filter Outline Drawing PCB Land Pattern Demo Board MCL P/N: TB-844-282B+ (without connectors) TB-844-282BC+ (with connectors) B20-118-F1+ Connector sold separately Suggested PCB Layout: PL-451+ Suggested Layout, Tolerance to be within ±.002 inch Outline Dimensions ( mm ) A B C D E F G H J.118.118.035.008.057.057.009 ---.016 3.00 3.00 0.89 0.20 1.45 1.45 0.23 --- 0.41 K L M N P Q R wt.020.127.127.049.010.020.049 grams 0.51 3.23 3.23 1.24 0.25 0.51 1.24 0.02 Tape & Reel Packaging Product Marking MCL B282 black body model family designation Tape Width, mm Device Cavity Pitch, mm 8 4 Reel Size, inches 7 Small quantity standard Devices per Reel see note 20 50 100 200 500 7 Standard 1000, 2000 Page 4 of 5
Reflectionless Filter Application Note Application Circuit Example Pairing mixers with reflectionless filters to improve system dynamic range Test block diagram: IF output reflection spectrum with single input frequency Figure 1. IF output reflection spectrum without filter Figure 2. IF output reflection spectrum with conventional filter An application circuit was assembled to measure the IF reflection spectrum at the output of a mixer when the mixer was paired with a conventional filter versus a reflectionless filter. While the conventional filter reduces the reflections present when the mixer is used alone (no filter), the reflectionless filter virtually eliminates those reflections altogether. The reflected signal at marker 1 in the figures above exhibits a reduction of more than 20 db from -28.7 dbm to -50.3 dbm when the reflectionless filter is used as compared to the conventional filter, thus eliminating unwanted spurious mixing products and improvingsystem dynamic range. For more information, refer to application note AN-75-007 Figure 3. IF output reflection spectrum with reflectionless filter Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/mclstore/terms.jsp Page 5 of 5