Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of ISO/IEC 80, confirmed by GHMT. The product is suitable for the use in 0G-Ethernet applications.. EMI protection 360 coverage of the engagement area with a metal shield assures protection against electromagnetic interference. When mated with corresponding connector the shield surfaces are securely connected to provide continuous circuit. 3. Protected latch tab Flexible case extends over the release tab preventing the possibility of breaking-off during handling of the complete cable assembly. 4. Termination of conductors Self located AWG 4-7 stranded conductors are terminated against pre-inserted contacts using simple tooling. 5. Simplified termination (cover) Removable one piece covers allows easy access to the termination areas. Protected latch tab Cover Installation Procedure 06.0
TM3P Series * Modular Plug Connectors * Compliant to Cat.6 A Product Specifications Rating Current Rating:.0A Voltage Rating: 5V AC Operating temperature range: -55 C to +85 C (note) Item Specifications Conditions. Insulation resistance 00MΩ min. 00V DC. Proof voltage No flashover or breakdown 500V AC for min. (between adjacent contacts) 3. Proof voltage (between contact and shield) No flashover or breakdown 500V AC for min. 4. Contact resistance 50mΩ max. (without 00mA (DC or 000Hz AC) 5. Vibration ) No electrical discontinuity of µs ) Contact resistance: 70mΩ max. (without Frequency 0 to 55Hz, Single Amplitude 0.75mm, at h for 3 axial directions 6. Shock 490m/s Duration of pulse ms, at 3 times for 3) No damage, crack and looseness of parts 3 axial directions 7. Durability Contact resistance: 70mΩ max. 750 mating/unmating cycles 8. Temperature cycle ) Contact resistance: 70mΩ max. (without Temperature: - 55 5 to 35 85 5 to 35 C; Time: 30 to 3 30 to 3 minutes ) Insulation resistance:00mω min. 5 cycles 3) No damage, crack and looseness of parts 9. Humidity ) Contact resistance: 70mΩ max. 90% to 95% RH, at 40 C ) No damage, crack and looseness of parts 0. Salt Spray ) Contact resistance: 70mΩ max. (without ) No damage, crack and looseness of parts Exposed in 5% Salt Water Spray for 48h Note: includes temperature rise caused by current flow Materials Part Material Finish Remarks Insulator Polycarbonate Color: Yellow UL94V- Contacts Copper alloy Contact area: Gold plating - Shield Stainless steel Nickel plating - Conductor holding tray Polycarbonate Color: Yellow UL94V- Cover Polyamide Color: see page 4 UL94V- Ordering information Plugs - shielded Guide Plate Covers TM3P - TM - 8 8P (6) 3 TM3P - TM - 88P (6) TMP - 88P (#) 3 Series name: TM3P Size: 8: For 8 contacts Inserted contacts: 8P: 8 Series name: TMP(*) Color code: see table page 4 (*) This cover is applicable for TMP and TM3P Packing unit: 4.000pcs Packing unit:.000pcs Packing unit: 50pcs
TM3P Series * Modular Plug Connectors * Compliant to Cat.6 A Plug connectors Specification (*) Dimensions in mm. 3
TM3P Series * Modular Plug Connectors * Compliant to Cat.6 A Plug covers Foldable cover with protected latch tab Part No. for cover TMP-88P () TMP-88P () TMP-88P (3) TMP-88P (4) TMP-88P (5) TMP-88P (6) TMP-88P (7) TMP-88P (8) Note: Cover of TMP series are used for TM3P series TMP-88P (9) (*) Dimensions in mm. Applicable Shielded Cable Specifications Color Light beige Medium gray Black Natural light gray Red Green Blue Yellow Orange Specifications Conductor Stranded copper conductor: AWG 4-7 x 7 Individual conductor insulation dia. 0.9 -.0mm Overall jacket dia. 5.8-6.0mm Note: For cable termination procedures, please contact Hirose representative 4
Powered by TCPDF (www.tcpdf.org) TM3P Series * Modular Plug Connectors * Compliant to Cat.6 A Contact Arrangement Contact arrangement in two rows results in improved performance (Contacts No. 3, 4, 5 and 6 are isolated from contacts No.,, 7 and 8). Hand tool Part number CL No. Applicable Connector Series HT60 / TMP-88P FB-TM TM3P TMP TMP The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 0/06. Contents are subject to change without notice for the purpose of improvements. 5