Secretariat: ISO/TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries - Drilling and production equipment American Petroleum Institute, 1220 L Street NW, Washington DC 20005 USA Tel. +1 202 682 8000 Fax. +1 202 962 4714 Report of the ISO/TC 67/SC 4 Secretariat 1 Secretariat: ANSI (Administered by API) 2 Chairman: Ted Zaleski VP-Engineering Smith Services P.O. Box 60068 Houston, Texas, USA, 77205-0068 Tel: + 1 281 233 5698 Fax: + 1 281 233 5714 Email: tzaleski@smith.com ISO/TC 67/SC 4 N 267 ISO/TC 67 N 848 2003-08-12 3 Secretary: Andy Radford American Petroleum Institute 1220 L Street NW Washington, DC 20005 USA 4 Membership: Tel: + 1 202 682 8584 Fax: + 1 202 962 4714 Email: radforda@api.org P Members O Members Argentina China Brazil Denmark France Korea, Republic of Germany Romania (P to O) Indonesia Yugoslavia Italy Category B Liaison Netherlands ISO/TC 105 Norway Poland Spain United Kingdom USA (S) 5 Scope Standardization of drilling and production equipment used in the petroleum, petrochemical and natural gas industries.
6 Organizational Structure The organizational structure of ISO/TC 67/SC 4 is as follows: WG 1 Drilling equipment ANSI (Dr. M. Payne [payneml@bp.com]) WG 2 Drilling well control equipment ANSI (Dr. D. Tannich [dtannich@cudd.com]) WG 3 Wellhead and Christmas tree equipment NEN (Mr. R. Langereis [langereisr@camerondiv.com]) WG 4 Production equipment NEN (Mr. E. Dijkhuis [edykhuis@wanadoo.nl]) WG 6 Subsea equipment NSF (Mr. O. Inderberg [olav.inderberg@fks.fmcti.com]) 7 Work Programme There have been 26 International Standards from the ISO/TC 67/SC 4 work programme published to date by ISO: 10407: 1993 10420: 1994 13628-1: 1999 13628-6: 2000 ISO 15136-1:2001 13625:2002 10417: 1993 10423: 1994 13628-4: 1999 13534:2000 ISO 10423:2001 13628-5:2002 10419: 1993 10433: 1994 10432: 1999 13535:2000 ISO 13533:2001 13628-8:2002 10428: 1993 13628-2:2000 ISO 14310:2001 10431: 1993 13628-3:2000 ISO 16070:2001 10432: 1993 (rev published in 1999) 13628-9:2000 8 Overall progress/concerns Mr. Ted Zaleski, Chairman of ISO/TC 67/SC 4, was nominated to another term at the May 2003 ISO/TC 67/SC 4 meeting: Resolution 17 (Houston, 2003) ISO/TC67/SC4 thanks Mr. Ted Zaleski for his service as SC4 Chairman and nominates him for a three-year extension as SC4 Chairman from 1 January 2003 to 31 December 2005. Mr. Andy Radford took over for Mr. David Miller as sub-committee Secretary in June. Problems wth ISO 10423 identified by AWHEM have been resolved and a revised 10423 has been prepared for FDIS ballot. API SC6 is expected to adopt-back the revised version of 10423 as the 19th Edition of API SPecifiaction 6A. 9 Meetings The following meetings have been held since the May 2002 meeting of ISO/TC 67/SC 4: SC 4 23/24 May, 2002 Delft, Netherlands WG 1 8 August, 2002 Houston, Texas WG 2 WG 3 None held WG 4 May 2002 August 2002 November 2002 March 2003 The Hague, Netherlands Calgary, Ontario, Canada Washington DC, USA New Orleans, LA, USA
WG 6 6 March 2003 Houston, Texas, USA The following meetings are planned: SC 4 8/9 May 2003 Houston, Texas, USA WG 1 None planned at this time WG 2 WG 3 None planned at this time WG 4 September 2003 Noevember 2003 WG 6 None planned at this time Tobago Pescara, Italy
ISO/TC 67/SC 4 Work in progress ISO/TC 67 N 848 Annex A Document Title Related docs CEN info Responsible committee ISO/CD 10407-1 P&NGI - Drilling and production equipment - Part 1: Recommended practice for drill stem design and operating limits API RP 7G (14th Ed.) CEN/TC 12 WI 92 20.20 WD 30.20 CD 40.20 DIS 50.20 FDIS 60.60 Pub TC 67/SC 4/WG 1 Latest 1998-06 1998-12 2004-04 2005-05 2006-11 Ed Bailey 1998-06 1999-04 Project Leader Comments: Document cancelled as of 2002-05-04 due to 7 year rule, must be balloted for reinstatement. Record Updated: 2003-06-18 ISO/CD 10407-2 P&NGI - Drilling and production equipment - Part 2: Recommended practice for inspection and classification of drill stem elements API RP 7G CEN/TC 12 WI 93 TC 67/SC 4/WG 1 Latest 1999-01 1999-07 2004-04 2005-04 2006-09 Joe Mackin 1999-04 1999-08 Comments: Document automatically deleated as of 2002-06-17 under the 7 year rule. Must be balloted for reinstatement. Record Updated: 2003-06-18 ISO/DIS 10424-1 P&NGI - Rotary drilling equipment - Part 1: Specifications for rotary drilling elements CEN/TC 12 WI 121 TC 67/SC 4/WG 1 Latest 2001-12 2003-01 2004-01 2004-04 Doyle Brinegar 2002-01 2003-01 Comments: DIS ballot terminated 2003-06-16. Document received 100% approval. Record Updated: 2003-07-16 ISO/CD 10424-2 P&NGI - Rotary drilling equipment - Part 2: Threading, CEN/TC 12 WI 122 gauging and testing of rotary shouldered threaded connections TC 67/SC 4/WG 1 Latest 2001-12 2004-01 2005-03 2005-08 Tony Collins 2002-12 Comments: CD comments period terminated 2003-03-04. Comments sent to PL for resolution on 2003-03-06. Record Updated: 2003-06-18 ISO/DIS 13626 P&NGI - Drilling and production equipment - Specification for drilling and well-servicing structures API Spec 4F (1st ed.) CEN/TC 12 WI 51 TC 67/SC 4/WG 1 Latest 1997-10 1998-06 2000-11 1998-01 1998-06 2000-11 2003-11 Mike McLeod Comments: Document sent on 2003-05-27 to CS for publication. Record Updated: 2003-06-18 ISO/DIS 14693 P&NGI - Drilling and well-servicing equipment API Spec 7K CEN/TC 12 WI 100 TC 67/SC 4/WG 1 Latest 1998-01 1999-03 2001-12 2003-08 2003-11 Mark Sibille 1998-01 1999-05 2002-07 Comments: Document sent to CS on 2003-05-28 for FDIS processing. Record Updated: 2003-06-18 ISO/AWI 13624-1 P&NGI - Drilling and production equipment - Design and operation of marine drilling riser systems API RP 16Q (1st ed.) CEN/TC 12 WI 49 TC 67/SC 4/WG 2 Latest 2004-02 2005-02 2006-04 2006-08 Paul Stanton Comments: Project split into 2 parts (Resolution 2 Houston/2003). Start date re-set. Record Updated: 2003-06-18 ISO/DTR 13624-2 P&ngi - Drilling and production equipment - Part 2: Applications of marine drilling riser system analysis TC 67/SC 4/WG 2 Latest Comments: Project created from split with -1 (Resolution 2 Houston, 2003). To be published as TR. 2004-02 2006-08 Record Updated: ISO/FDIS 10423 P&ngi - Drilling and production equipment - Wellhead and christmas tree equipment TC 67/SC 4/WG 3 Latest Comments: Corrected version to be circulated for FDIS ballot in 2003-08. Registered at stage 50.00 in 2003-07. 2003-08 2003-12 Record Updated:
ISO/DIS 10417 P&NGI - Subsurface safety valve systems - Design, installation, operation and redress API RP 14B (3rd ed.) CEN/TC 12 WI 6 TC 67/SC 4/WG 4 Latest 2001-11 2002-04 2003-08 2003-12 John Yonker 1998-03 2001-11 2002-06 Comments: Waiting for final approval from chairman before submission. Record Updated: 2003-06-18 ISO/WD 10428 P&NGI - Sucker rods (pony rods, polished rods, couplings and sub-couplings) - Specification API Spec 11B (24th ed.) CEN/TC 12 WI 15 TC 67/SC 4/WG 4 Latest 2000-12 2004-06 2005-06 2006-08 2007-01 Sid Thomas 2001-02 Comments: Document automatically cancelled as of 2003-06-30, TMB Res 8/2001. Record Updated: 2003-07-15 ISO/WD 10431 P&NGI - Pumping units - Specification API Spec 11E (16th ed.) CEN/TC 12 WI 16 TC 67/SC 4/WG 4 Latest 2000-12 2003-02 2003-08 2004-08 2005-05 Norman Hein 2001-02 Comments: Res 9 (Houston, 2003) supports the plan of WG 4 to skip CD stage. Ready-for-DIS targeted for Sept 2003. Record Updated: 2003-07-15 ISO/DIS 10432 P&ngi - Downhole equipment - Subsurface safety valve equipment [Revision of ISO 10432:1999] ISO 10432:1999 TC 67/SC 4/WG 4 Latest 2003-06 2004-05 2004-09 Bert Dijkhuis 2003-07 Comments: DIS ballot opens 2003-07-10, terminates 2003-12-10. Record Updated: 2003-07-15 ISO/WD 15136-2 P&NGI - Progressive cavity pumps systems for artificial lift - Part 2: Drive heads CEN/TC 12 WI 109 TC 67/SC 4/WG 4 Latest 2002-12 2004-01 2004-07 2005-04 2006-04 2002-11 Comments: WD delivered 2002-11-20. Document reactivated on the work programme. Record Updated: 2002-12-02 ISO/DIS 17078-1 P&NGI - Drilling and production equipment - Part 1: Sidepocket mandrels API Spec IIVI CEN/TC 12 WI 117 TC 67/SC 4/WG 4 Latest 2002-03 2003-01 2004-03 2004-07 Wayne Mabry 1998-11 2002-04 2003-02 Comments: DIS ballot terminated 2003-07-27. Document approved and comments sent to PL for consideration and resolution on 2003-07-31. Record Updated: 2003-08-08 ISO/WD 17078-2 P&NGI -Drilling and production equipment - Part 2: Sidepocket mandrel gas lift valves and flow control devices CEN/TC 12 WI 118 TC 67/SC 4/WG 4 Latest 2000-10 2004-06 2005-06 2006-08 2007-01 Wayne Mabry 2001-02 Comments: WD stage (20.20) reached 2001-02. Record Updated: 2003-06-18 ISO/AWI 17078-3 P&NGI - Drilling and production equipment - Part 3: Latches, seals, and interface data for side-pocket mandrels and flow control devices CEN/TC 12 119 TC 67/SC 4/WG 4 Latest 2005-05 2006-05 2007-07 2007-11 Wayne Mabry Comments: Project re-instated after start date re-set. Record Updated: 2003-06-18 ISO/AWI 17824 P&NGI - Downhole equipment - Wire wrapped screens TC 67/SC 4/WG 4 Latest 2005-05 2006-05 2007-07 2007-11 Bert Dijkhuis Comments: Start date re-set and document reinstated. Record Updated: 2003-06-18 ISO/AWI 13628-1 P&ngi - Design and operation of subsea production systems - Part 1: General requirements and recommendations [Rev. of ISO 13628-1:1999] ISO 13628-1:1999 TC 67/SC 4/WG 6 Latest 2002-05 2003-08 2004-10 2005-03 William Bakke
Comments: Draft DIS sent to ISO CS on 2003-07-15 for DIS processing. Record Updated: 2003-07-15 ISO/DIS 13628-10 P&ngi - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe TC 67/SC 4/WG 6 Latest 2003-06 2004-08 2005-01 Krassimir Doynov 2003-07 Comments: DIS ballot opens 2003-07-17, terminates 2003-12-17. Record Updated: 2003-07-21 ISO/AWI 13628-6 P&ngi - Design and operation of subsea production systems - Part 6: Subsea production systems (Revision of ISO 13628-6:2000) TC 67/SC 4/WG 6 Latest 2001-09 2003-08 2004-10 2005-03 Jens Henrik Neuenkirchen Comments: Added to the ISO/TC 67/SC 4/WG 6 work programme 2001-03-29. Revised ballot results circulated as 67 N 745 Revised. Record Updated: 2003-06-18 ISO/DIS 13628-7 P&NGI - Design and operation of subsea production systems - Part 7: Workover/Completion riser systems API RP 17G (1st ed) TC 67/SC 4/WG 6 Latest 1998-03 1999-07 2002-01 2003-11 2004-02 Anthony Muff 2000-04 2001-11 Comments: DIS ballot opens 2001-11-22, terminates 2002-04-22. Record Updated: 2003-06-18 ISO/WD 16389 P&NGI - Drilling and production equipment - Dynamic production risers API RP 2RD; ISO 2394; DNV 96 CEN/TC 12 WI 102 TC 67/SC 4/WG 6 Latest 1998-12 2001-11 2002-08 2003-10 2004-03 Bernt Leira 1999-02 Comments: Project automatically deleted under the 3-year rule. Will be reinstated if CD is progressed by 2003-07-07. Record Updated: 2002-02-13