Bezdan Stainless EXCEPTIONAL DESIGN AND FUNCTION Bezdan offers frameless and baluster glass railing systems that deliver a high end result with exceptional design and function for everyday applications. Find carefully selected stainless steel and metal components that offer quality, safety, function, and beauty for a seamless and streamlined design. Frameless Glass Railing Create railings with minimal hardware and no vertical posts for uninterrupted views that maximize light and sightlines. u Base Clamps u Adapters Baluster Railing Create railings with stainless steel posts that can combine with glass or cable infill to make a defining statement. u Posts & Bases u Handrail Brackets, Tubing & Fittings u Glass Clips u Solar Accent Lighting 04/17 geobezdan.com 1 800 663 6356 1
FIGURE 1: Private Residence, Canada
Frameless Glass Railing Enhance Space. Invite Light. u Clean and subtle look u Round, smooth forms u Indoor and outdoor use u Top and fascia mount options Surface Mount Glass Clamp Showcase the beauty and transparency of glass u Surface mount solution for windscreen applications u Available in a round, smooth form u Accepts 10mm to 12mm (3/8" to 15/32") glass Fascia Mount Glass Adapters Enhance light and space with a clean, subtle look u Fascia mount solution for frameless glass railings u Ideal for view-orientated spaces u Available in round form; single or double format u Accepts 8mm to 22mm (5/16" to 55/64") glass Metal Usage Guide MATERIAL INDOOR OUTDOOR Stainless Steel Alloy 304 4 Stainless Steel Alloy 316 4 4 04/17 geobezdan.com 1 800 663 6356 3
FRAMELESS GLASS RAILING BASE GLASS CLAMPS Surface Mount Glass Clamp, Round Base T ø 1-7/8" ø 3-7/8" 1/4" 2-3/8" 3-9/16" 2-3/8" 7-1/16" ø 11/32" w Surface mount solution for windscreen applications such as pool decks and patios w Low profile machined base plate with countersunk holes creates a clean look, no cover flange required w Supplied with sets of rubber gaskets for each glass size w 316 indoor/outdoor use w Cover flange, round (optional) INSTALLATION w Holes in base are drilled for ø 3/8" anchors Part # Glass Size (T) Material Alloy Finish Weight 6005 10-12mm Stainless Steel 316 #4 Satin 3.75 lbs. each Cover Flange, Round 11/16" ø 4-1/8" ø 1-7/8" w Provides a finishing element for the surface mount glass clamp, round base w 316 indoor/outdoor use w Surface mount glass clamp, round base Part # Material Alloy Finish Weight 6055 Stainless Steel 316 #4 Satin 0.30 lbs. each Important: Glass Size Glass clamps and adapters are designed to work with a minimum and maximum glass size (thickness). The glass size upper limit cannot be exceeded as it will affect the integrity of the clamp or adapter. Important: Installing on Wood Consult an engineer for recommended reinforcement if mounting glass clamps and adapters to wood. 4 geobezdan.com 1 800 663 6356 04/17
FRAMELESS GLASS RAILING GLASS ADAPTERS - FASCIA MOUNT Double Adapter, Round ø 3/8" 4" 1-3/4" M5 3/8" M10 x 1.5 ø 2" w The double adapter gives you the option of installing with the mounting plate visible or concealed w Adapters are mechanically fastened to the mounting plate w Supplied with UV resistant white silicone gaskets and grommets w 316 indoor/outdoor use 3/8" w Rubber strap wrench (supplied by others) w Suggested fastener: M10 (supplied by others) 4" 3" 4" 7" 8" INSTALLATION w A minimum of two double adapters per panel is required w Pre-drill two ø 3/4" holes in glass for grommet and fastener w Holes in base are drilled for ø 3/8" bolts or anchors w A rubber strap wrench may be used to tighten the caps and can be found at most hardware supply sources ø 3/8" Part # Glass Size Material Alloy Finish Weight 6905 12-19mm Stainless Steel 316 #4 Satin 6.55 lbs. each Stainless Steel Care & Maintenance Learn about stainless steel alloy characteristics and recommendations for indoor and outdoor applications. Additionally, find care and maintenance information to preserve the appearance and integrity of stainless steel after installation. u See the Resources tab. 04/17 geobezdan.com 1 800 663 6356 5
FIGURE 2: Private Residence, Canada Single Adapter Test Approved Adapters have been tested and certified by an independent agency to meet performance and safety requirements of National Building Code (NBC) 2015 Section 4.1.5.14. when used in a railing assembly. It s important to note that the quality and performance of glass infill panels used in conjunction with adapters is supplied by others and is the responsibility of the installer. Installation and anchorage of the adapters is subject to code approval. Always consult with your local building department or licensed engineer before starting your project to ensure compliance with your local code. National Building Code cover image reproduced with the permission of the National Research Council of Canada, copyright holder. 6 geobezdan.com 1 800 663 6356 04/17
FRAMELESS GLASS RAILING GLASS ADAPTERS - FASCIA MOUNT Single Adapter, Round 3/8"-16 Body Grommet T Cap ø w Fascia mount solution for frameless glass railings w Smooth beveled edges w Supplied with UV resistant precision grip clear silicone gaskets and grommet Available diameters: ø 1-1/2" ø 2" L Gaskets w 316 indoor/outdoor use w Rubber strap wrench (supplied by others) w Suggested fastener: 3/8"-16 thread (supplied by others) INSTALLATION w Install in pairs. Minimum four adapters per panel required w Pre-drill a ø 3/4" hole in glass for grommet and fastener w A rubber strap wrench may be used to tighten the caps and can be found at most hardware supply sources Part # Diameter (ø) Glass Size (T) Material Alloy Finish Length (L) Weight 6101 1-1/2" 8-12mm Stainless Steel 304 #4 Satin 1" 0.80 lbs. each 6105 1-1/2" 8-12mm Stainless Steel 316 #4 Satin 1" 0.80 lbs. each 6110 1-1/2" 8-12mm Stainless Steel 304 #4 Satin 1-1/2" 1.03 lbs. each 6115 1-1/2" 8-12mm Stainless Steel 316 #4 Satin 1-1/2" 1.03 lbs. each 6120 1-1/2" 8-12mm Stainless Steel 304 #4 Satin 2" 1.20 lbs. each 6125 1-1/2" 8-12mm Stainless Steel 316 #4 Satin 2" 1.20 lbs. each 6210 2" 10-12mm Stainless Steel 304 #4 Satin 1-1/2" 2.08 lbs. each 6215 2" 10-12mm Stainless Steel 316 #4 Satin 1-1/2" 2.08 lbs. each 6220 2" 10-19mm Stainless Steel 304 #4 Satin 2" 2.52 lbs. each 6225 2" 10-19mm Stainless Steel 316 #4 Satin 2" 2.52 lbs. each 6230 2" 10-22mm Stainless Steel 304 #4 Satin 3" 3.51 lbs. each 6235 2" 10-22mm Stainless Steel 316 #4 Satin 3" 3.51 lbs. each Designed for Performance Design elements that improve installation and performance: u UV resistant silicon gaskets provide precision grip, durability, and longevity u Beveled edges are smooth to the touch and improve installation and handling, no sharp edges u Designed to install with a 3/8"-16 thread anchor that can be found at most hardware supply sources 04/17 geobezdan.com 1 800 663 6356 7
FIGURE 3: Private Residence, Canada
Baluster Railing Elegant and Modern u Round form baluster posts and components u Round, square and rectangular form glass clips u Level and stair applications u Test approved Sleek and Timeless Create custom railings Cool, contemporary stainless steel baluster railings give interiors a sleek, modern, and timeless appeal. Find components to create a complete customizable railing solution. Stainless steel posts, handrail brackets, tubing and fittings can combine with glass or cable infill to make a defining statement for residential, commercial, institutional and industrial projects. Versatile infill options u Select glass clips with post for an elegant, timeless look u Select cable railing infill for a contemporary, industrial style Features: u Posts with double welded finished anchor plate and low profile making cover flange optional u Precision fit components with extremely tight tolerances u Railings are quick to assemble without use of clamps u NBC 2015 test approved for structural performance Metal Usage Guide MATERIAL INDOOR OUTDOOR Stainless Steel Alloy 201 4 Stainless Steel Alloy 304 4 Stainless Steel Alloy 316 4 4 Zinc 4 04/17 geobezdan.com 1 800 663 6356 9
BALUSTER RAILING SYSTEM Exceptional Design and Function u Posts have a double welded machined anchor plate for superior strength and durability u Satin finish, low profile anchor plate with countersunk holes creates a clean look making a cover flange optional u Handrail brackets have sleek, low profile saddles with countersunk fastening holes for a streamlined design u Posts, tubing, and fittings are designed with extremely tight tolerances resulting in virtually seamless joins and faster installation time u Precision fit components, coupled with Bezdan approved quick-bonding adhesive, allow railings to be assembled efficiently without the use of clamps u Fully tested to current National Building Code 2015 (NBC) standards for concentrated loads FEATURES & BENEFITS 4 Double welded anchor plate 4 Cover flange is optional 4 Precision fit components 4 Quick assembly without clamps 4 NBC 2015 test approved Performance & Safety Bezdan stainless steel round posts have been fully tested to current National Building Code standards for concentrated loads. 10 geobezdan.com 1 800 663 6356 04/17
BALUSTER RAILING POSTS & BASES New Round Post with Anchor Plate 34" or 38" 0.30 ø 1-1/2" 0.33 4.02 w Post wall thickness is 0.078" to accommodate top mount brackets and caps w Post can be drilled-to-suit glass clips or cable railing as required w Durable double welded machined anchor plate w Satin finish, low profile anchor plate with countersunk holes creates a clean look making a cover flange optional w The extremely tight tolerance on the post tubing ensures a precision fit and quick-bonding with fittings w Use Bezdan approved quick bonding adhesive with fittings to greatly reduce installation time Plain Post Anchor plate Shown with cover flange w Cover flange (optional) w Ultra-tec cable railing w Glass clips w Top mount brackets or cap w Cleaner w Suggested fastener: Anchor to surface: QS-519 part #19.4212.150.14 Part # Diameter Material Alloy Finish Height Weight 9020 ø 1-1/2" x 0.078" Stainless Steel 304 #4 Satin 34" 4.55 lbs. each 9025 ø 1-1/2" x 0.078" Stainless Steel 304 #4 Satin 38" 4.75 lbs. each Cable Railing Infill Combine posts with cable railing infill for a contemporary, industrial style. u See Ultra-tec, Kits for Metal Posts, 212 Series for level and 232 Series for angled applications in the Cable Railing tab Drill-To-Suit Flowdrill is the leading edge chipless drill and tap process that saves time and money. u Part #FD STARTER Accessories page 49 04/17 geobezdan.com 1 800 663 6356 11
BALUSTER RAILING POSTS & BASES New Round Post with Anchor Plate, Pre-Drilled 34" or 38" 8" Hole spacing: 34" post: 18" 38" post: 22" 34" or 38" 8 Hole spacing: 34" post: 18" 38" post: 22" 34" or 38" 8 Hole spacing: 34" post: 18" 38" post: 22" w Post wall thickness is 0.078" to accommodate top mount brackets and caps w Post is pre-drilled to accept glass clips for end, center or corner configurations w Durable double welded machined anchor plate w Satin finish, low profile anchor plate with countersunk holes creates a clean look making a cover flange optional w The extremely tight tolerance on the post tubing ensures a precision fit and quick-bonding with fittings w Use Bezdan approved quick bonding adhesive with fittings to greatly reduce installation time 8 End Post Accepts 2 glass clips 8 Center Post Accepts 4 glass clips 8 Corner Post Accepts 4 glass clips w Cover flange (optional) w Glass clips w Top mount brackets or cap w Cleaner w Suggested fasteners: Anchor to surface: QS-519 part # 19.4212.150.14 Glass clips to post: QS 127 part # 94.0680.820.14 or 5/16"-18 coarse thread fastener Part # Application Diameter Material Alloy Finish Height Weight 9021 End ø 1-1/2" x 0.078" Stainless Steel 304 #4 Satin 34 4.55 lbs. each 9026 End ø 1-1/2" x 0.078" Stainless Steel 304 #4 Satin 38 4.75 lbs. each 9022 Center ø 1-1/2" x 0.078" Stainless Steel 304 #4 Satin 34 4.55 lbs. each 9027 Center ø 1-1/2" x 0.078" Stainless Steel 304 #4 Satin 38 4.75 lbs. each 9023 Corner ø 1-1/2" x 0.078" Stainless Steel 304 #4 Satin 34" 4.55 lbs. each 9028 Corner ø 1-1/2" x 0.078" Stainless Steel 304 #4 Satin 38" 4.75 lbs. each Save Time with Precision Fit Components Bezdan posts, tubing, and fittings are designed for industry-leading accuracy with tighter tolerances than commercial standards. The extremely tight tolerances create virtually seamless joins and can significantly reduce installation time. Precision fit components, coupled with Bezdan approved quick-bonding adhesive, allows railings to be assembled efficiently without the use of clamps. 12 geobezdan.com 1 800 663 6356 04/17
BALUSTER RAILING POSTS & BASES New Anchor Plate 0.30 ø 1-1/2" ø 0.33 4.02 w Satin finish, low profile machined anchor plate with countersunk holes creates a clean look making a cover flange optional w Round tube w Suggested fasteners: Anchor to surface: QS-519 part #19.4212.150.14 Part # Diameter Material Alloy Finish Weight 9001 ø 1-1/2" Stainless Steel 304 #4 Satin 0.860 lbs. each New Cover Flange 0.73 4.09 ø 1-1/2" w Provides a finishing element for posts and anchor plate w Low profile for a clean and subtle look w Designed to work with low profile machined anchor plate on round post w Round post w Round tube w Anchor plate Part # Fits With Material Alloy Finish Weight 9002 ø 1-1/2" Stainless Steel 304 #4 Satin 0.155 lbs. each Custom Posts Use stainless steel round tube to create custom posts. u Round tube Bezdan Stainless page 20 04/17 geobezdan.com 1 800 663 6356 13
BALUSTER RAILING HANDRAIL BRACKETS Mounting Solutions Mounting solutions for handrail brackets include top, glass and wall mount. Within these styles, variations include: u Saddle shape to accommodate round, square or rectangular style handrail u Adjustability for angled applications u Round and square form Top Mount Glass and Wall Mount Fixed, Round Saddle Adjustable, Flat Saddle Fixed, Flat Saddle Adjustable, Flat Saddle Top Mount Top Mount Glass Mount Wall Mount FIGURE 4: Private Residence, Canada
BALUSTER RAILING HANDRAIL BRACKETS New Top Mount Brackets, Center, Fixed Saddle 3.25 0.16 0.18 ø 0.55 1.18 ø 1-1/2" 2.56 0.18 ø 0.22 2.56 ø 0.22 0.98 0.98 w Sleek, low profile saddles with countersunk fastening holes create a streamlined design w Connection sleeve depth provides increased strength and ample surface area for adhesive application w Use with Bezdan approved quick-bonding adhesive to greatly reduce installation time w A reservoir in the bracket sleeve accommodates any excess adhesive w Available to suit round, square or rectangular handrail 3.25 0.16 ø 0.55 1.18 ø 1-1/2" 2.56 w Round post w Round, square and rectangular tube w Loctite 680 w Suggested fasteners: Saddle to handrail, round type: QS-111 part # 94.0511.516.14 Saddle to handrail, flat type: QS-113 part # 94.0670.520.14 Part # Post Type Saddle Type Material Alloy Finish Weight 9201 ø 1-1/2" x 0.078" Suits ø 1-1/2" Stainless Steel 304 #4 Satin 0.439 lbs. each 9202 ø 1-1/2" x 0.078" Flat Stainless Steel 304 #4 Satin 0.445 lbs. each A Stronger Connection for Faster Installation Bezdan fittings are designed with a deep connection sleeve that exceeds industry standards. This sleeve depth provides increased strength and ample surface area for adhesive application. Installation time is greatly reduced when used with Bezdan approved quick-bonding adhesive. A reservoir in the fitting accommodates excess adhesive. 04/17 geobezdan.com 1 800 663 6356 15
BALUSTER RAILING HANDRAIL BRACKETS New Top Mount Brackets, Center, Adjustable Saddle 0.18 3.25 ø 0.55 0.16 1.18 ø 1-1/2" 0.18 3.25 ø 0.55 ø 0.22 2.56 ø 0.22 2.56 0.98 0.98 w Sleek, low profile saddles with countersunk fastening holes create a streamlined design w Connection sleeve depth provides increased strength and ample surface area for adhesive application w Use with Bezdan approved quick-bonding adhesive to greatly reduce installation time w A reservoir in the bracket sleeve accommodates any excess adhesive w Adjustable saddle for angled applications w Available to suit round, square or rectangular handrail 0.16 ø 1-1/2" 1.18 w Round post w Round, square and rectangular tube w Loctite 680 w Suggested fasteners: Saddle to handrail, round type: QS-111 part # 94.0511.516.14 Saddle to handrail, flat type: QS-113 part # 94.0670.520.14 Part # Post Type Saddle Type Material Alloy Finish Weight 9203 ø 1-1/2" x 0.078" Suits ø 1-1/2" Stainless Steel 304 #4 Satin 0.457 lbs. each 9204 ø 1-1/2" x 0.078" Flat Stainless Steel 304 #4 Satin 0.449 lbs. each Bezdan Approved Adhesive Apply a small amount of Loctite 680 quick-bonding adhesive evenly around the inside of the post tubing to ensure a strong connection. A reservoir in the fitting accommodates excess adhesive. u Part #LOCTITE 680 Accessories page 44 16 geobezdan.com 1 800 663 6356 04/17
BALUSTER RAILING HANDRAIL BRACKETS New Glass Mount Brackets, Fixed Saddle 0.28 ø 1.97 2.95 0.20 0.18 1.97 ø 0.55 ø 0.22 2.56 0.98 w Sleek, low profile saddles with countersunk fastening holes create a streamlined design w Available to suit round, square or rectangular handrail w Supplied with UV resistant precision grip clear silicone gaskets and grommet 0.28 ø 1.97 2.95 0.18 0.20 1.97 ø 0.55 ø 0.22 2.56 0.98 w Round, square and rectangular tube w Suggested fasteners: Saddle to handrail, round type: QS-111 part # 94.0511.516.14 Saddle to handrail, flat type: QS-113 part # 94.0670.520.14 Part # Saddle Type Glass Size Material Alloy Finish Weight 9740 Suits ø 1-1/2" 8-17mm Stainless Steel 304 #4 Satin 0.796 lbs. each 9730 Flat 8-17mm Stainless Steel 304 #4 Satin 0.802 lbs. each FIGURE 5: Private Residence, Canada
BALUSTER RAILING HANDRAIL BRACKETS Wall Mount Brackets, Fixed Saddle, Round 1-1/2" w Round base with low profile for a clean, subtle look w Available to suit round, square and rectangular handrail 2-3/8" 2-3/8" ø 1/2" ø 3/16" 1-13/64" 2-15/16" ø 1/2" ø 3/16" 2" 2" w 316 indoor/outdoor use w Round, square and rectangular tube w Suggested fasteners: Saddle to handrail, round type: QS-111 part # 94.0511.516.14 Saddle to handrail, flat type: QS-113 part # 94.0670.520.14 Bracket to wall, indoor: QS-5 part # 93.0220.525.13 Bracket to wall, outdoor: QS-6 part # 93.0220.525.14 1-13/64" 2-15/16" Part # Saddle Type Material Alloy Finish Weight 9720 Suits ø 1-1/2" Stainless Steel 304 #4 Satin 0.46 lbs. each 9725 Suits ø 1-1/2 Stainless Steel 316 #4 Satin 0.46 lbs. each 9710 Flat Stainless Steel 304 #4 Satin 0.46 lbs. each 9715 Flat Stainless Steel 316 #4 Satin 0.46 lbs. each FIGURE 6: Private Residence, Canada
BALUSTER RAILING HANDRAIL BRACKETS New Wall Mount Bracket, Fixed Saddle, Rectangular 0.24 0.16 2.95 1.97 w Rectangular base with low profile for a clean, subtle look w Sleek, low profile saddles with countersunk fastening holes create a streamlined design w Suits square or rectangular handrail w 316 indoor/outdoor use ø 0.22 2.76 Bracket to Wall 1.57 ø 0.26 2.56 Saddle to Handrail 0.98 w Square and rectangular tube w Suggested fasteners: Saddle to handrail: QS-113 part # 94.0670.520.14 Bracket to wall, indoor: QS-5 part # 93.0220.525.13 Bracket to wall, outdoor: QS-6 part # 93.0220.525.14 Part # Saddle Type Material Alloy Finish Weight 9750 Flat Stainless Steel 304 #4 Satin 0.698 lbs. each 9755 Flat Stainless Steel 316 #4 Satin 0.698 lbs. each New Wall Mount Bracket, Adjustable Saddle, Rectangular 0.24 0.16 2.95 1.97 w Rectangular base with low profile for a clean, subtle look w Sleek, low profile saddles with countersunk fastening holes create a streamlined design w Adjustable saddle for angled application w Suits square or rectangular handrail ø 0.22 ø 0.26 w 316 indoor/outdoor use 2.76 Bracket to Wall 1.57 2.56 Saddle to Handrail 0.98 w Square and rectangular tube w Suggested fasteners: Saddle to handrail: QS-113 part # 94.0670.520.14 Bracket to wall, indoor: QS-5 part # 93.0220.525.13 Bracket to wall, outdoor: QS-6 part # 93.0220.525.14 Part # Saddle Type Material Alloy Finish Weight 9770 Flat Stainless Steel 304 #4 Satin 0.725 lbs. each 9775 Flat Stainless Steel 316 #4 Satin 0.725 lbs. each 04/17 geobezdan.com 1 800 663 6356 19
BALUSTER RAILING TUBING & FITTINGS Round Tube Grain direction 19.84' ø 1-1/2" 0.078 w For handrail or custom posts w Circumferential grain direction harmoniously matches fittings w Extremely tight tolerance on wall thickness ensures virtually seamless joins, precisely centered fittings and quickbonding, no clamps required w Use with Bezdan approved quick-bonding adhesive to greatly reduce installation time w 201 indoor use w 316 indoor/outdoor use Part # Diameter Material Alloy Finish Length Weight New Alloy 9005 ø 1-1/2" x 0.078" Stainless Steel 201 #4 Satin 19.84' 23.92 lbs. each 9010 ø 1-1/2" x 0.078" Stainless Steel 304 #4 Satin 19.84' 23.92 lbs. each 9015 ø 1-1/2" x 0.078" Stainless Steel 316 #4 Satin 19.84' 23.92 lbs. each Consistent Quality Bezdan is committed to providing an exceptional product to our customers. Stainless steel tube is wrapped in a plastic sleeve then individually packaged in shipping quality cardboard. A final degree of protection is added upon shipping to ensure product is received ready to install without downtime or delays due to damaged goods. Save Time with Precision Fit Components Bezdan posts, tubing, and fittings are designed for industry-leading accuracy with tighter tolerances than commercial standards. The extremely tight tolerances create virtually seamless joins and can significantly reduce installation time. Precision fit components, coupled with Bezdan approved quick-bonding adhesive, allows railings to be assembled efficiently without the use of clamps. 20 geobezdan.com 1 800 663 6356 04/17
BALUSTER RAILING TUBING & FITTINGS New Internal Connector 0.16 0.32 1.97 Lip 0.82 ø 1-1/2" w Provides a connection for a continuous run of handrail w Connection sleeve depth provides increased strength and ample surface area for adhesive application w Use with Bezdan approved quick-bonding adhesive to greatly reduce installation time w A reservoir in the fitting accommodates excess adhesive w Round tube w Loctite 680 Part # Fits With Material Alloy Finish Weight 9239 ø 1-1/2" x 0.078" Stainless Steel 304 Exposed Lip #4 Satin 0.163 lbs. each FIGURE 7: Illustrative Product Demonstration
BALUSTER RAILING TUBING & FITTINGS New Elbow, Adjustable, 0 to 90 2.05 ø 1-1/2" 0.98 0.16 0.98 w Provides a 0 to 90 angle suitable for most transitions between level and sloped applications w Connection sleeve depth provides increased strength and ample surface area for adhesive application w Use with Bezdan approved quick-bonding adhesive to greatly reduce installation time w A reservoir in the fitting accommodates excess adhesive w Round post w Round tube w Loctite 680 Part # Fits With Material Alloy Finish Weight 9233 ø 1-1/2" x 0.078" Stainless Steel 304 #4 Satin 0.895 lbs. each Bezdan Approved Adhesive Apply a small amount of Loctite 680 quick-bonding adhesive evenly around the inside of the post tubing to ensure a strong connection. A reservoir in the fitting accommodates excess adhesive. u Part #LOCTITE 680 Accessories page 44 A Stronger Connection for Faster Installation Bezdan fittings are designed with a deep connection sleeve that exceeds industry standards. This sleeve depth provides increased strength and ample surface area for adhesive application. Installation time is greatly reduced when used with Bezdan approved quick-bonding adhesive. A reservoir in the fitting accommodates excess adhesive. 22 geobezdan.com 1 800 663 6356 04/17
BALUSTER RAILING TUBING & FITTINGS New Radiused Elbow, 90 ø 1-1/2" 2.63 0.81 0.16 ø 1-1/2" w Provides a smooth, rounded 90 corner for level applications w Connection sleeve depth provides increased strength and ample surface area for adhesive application w Use with Bezdan approved quick-bonding adhesive to greatly reduce installation time w A reservoir in the fitting accommodates excess adhesive w Round post w Round tube w Loctite 680 Part # Fits With Material Alloy Finish Weight 9231 ø 1-1/2" x 0.078" Stainless Steel 304 #4 Satin 0.456 lbs. each New Mitered Elbow, 90 ø 1-1/2" 3.15 0.79 0.16 ø 1-1/2" w Provides a clean 90 corner for level applications w Connection sleeve depth provides increased strength and ample surface area for adhesive application w Use with Bezdan approved quick-bonding adhesive to greatly reduce installation time w A reservoir in the fitting accommodates excess adhesive w Round post w Round tube w Loctite 680 Part # Fits With Material Alloy Finish Weight 9232 ø 1-1/2" x 0.078" Stainless Steel 304 #4 Satin 0.584 lbs. each 04/17 geobezdan.com 1 800 663 6356 23
BALUSTER RAILING TUBING & FITTINGS Seamless Elbow, 90 ø w Elbow welds onto tube and may have a slight variation in finish when joined 0.065 A w Round tube Part # Fits With Material Alloy Finish Center Line Radius (A) Weight SS 1.5 OD POL 1-1/2" x 0.065" Stainless Steel 304 #4 Satin 2-1/4" 0.29 lbs. each SS 2 OD POL 2" x 0.065" Stainless Steel 304 #4 Satin 3" 0.52 lbs. each New Cap 0.62 ø 1-1/2" 0.10 w Provides a finishing element for posts and handrail w Use with Bezdan approved quick-bonding adhesive to greatly reduce installation time w A reservoir in the fitting accommodates any excess adhesive w Round post w Round tube w Loctite 680 Part # Fits With Material Alloy Finish Weight 9254 ø 1-1/2" x 0.078" Stainless Steel 304 #4 Satin 0.086 lbs. each New Domed Cap ø 1-1/2" 0.22 w Provides a finishing element for posts and handrail 0.41 0.08 w Round post w Round tube INSTALLATION w Knurled feature enables compression fit Part # Fits With Material Alloy Finish Weight 9251 ø 1-1/2" x 0.078" Stainless Steel 304 #4 Satin 0.106 lbs. each 24 geobezdan.com 1 800 663 6356 04/17
FIGURE 8: Private Residence, Canada
BALUSTER RAILING GLASS CLIPS Mounting Solutions Customize Glass Railings with Glass Clips Create custom glass railings and partitions with a wide variety of high-quality glass clips for stairs, balconies, decks and fences. Glass clips are available to suit round or square posts. Within these formats, glass clips are available in round, square and rectangular forms in small, medium and large sizes for indoor and outdoor applications. Clips for Round Post Clips for Square Post Round form Round form S M L S M L Square form Square or rectangular form S M L S M L 26 geobezdan.com 1 800 663 6356 04/17
BALUSTER RAILING GLASS CLIPS Round Glass Clip for Round Post S: 13/16" M: 1-1/8" L: 1-5/16" S: 1-3/16" M: 1-3/4" L: 2-5/32" S: 3/8" M: 5/8" L: 5/8" S: 1-7/16" M: 2-5/8" L: 2-5/8" T w Supplied with multiple gasket sets that can be used in combination to suit varying glass thickness options w Medium and large glass clips are supplied with optional nylon security pins for added safety w 316 indoor/outdoor use w Suggested fasteners: Small clips to post: #8 fastener (supplied by others) Medium and large clips to post: QS-127 part# 94.0680.820.14 Part # Clip Size Glass Size (T) Fits Tubing Material Alloy Finish Weight S7105RB-B Small 6 or 8mm ø 2" Stainless Steel 316 #4 Satin 0.19 lbs. each S7220RB-B* Medium 6, 8, 10 or 12mm ø 2" Stainless Steel 316 #4 Satin 0.83 lbs. each S7222RB-B* Medium 6, 8, 10 or 12mm ø 1-1/2" Stainless Steel 304 #4 Satin 0.70 lbs. each S7330RB-B* Large 8, 10 or 12mm ø 2" Stainless Steel 304 #4 Satin 1.11 lbs. each * Optional security pin included Round Posts Use stainless steel round posts with medium glass clips for ø 1-1/2 tubing to create glass railings. u Round Post Bezdan Stainless page 11 Important: Glass Size Glass clips are designed to work with a minimum and maximum glass size (thickness). The glass size upper limit cannot be exceeded as it will affect the integrity of the glass clip. 04/17 geobezdan.com 1 800 663 6356 27
BALUSTER RAILING GLASS CLIPS Round Glass Clip for Square Post S: 13/16" M: 1-1/8" L: 1-1/4" S: 1-3/16" M: 1-3/4" L: 2-5/32" S: 3/8" M: 5/8" L: 5/8" S: 1-5/16" M: 2-1/2" L: 2-3/8" T w Supplied with multiple gasket sets that can be used in combination to suit varying glass thickness options w Medium and large glass clips are supplied with optional nylon security pins for added safety w 316 indoor/outdoor use w Suggested fasteners: Small clips to post: #8 fastener (supplied by others) Medium and large clips to post: QS-127 part# 94.0680.820.14 Part # Clip Size Glass Size (T) Fits Tubing Material Alloy Finish Weight S7105SB-B Small 6 or 8mm Square Stainless Steel 316 #4 Satin 0.19 lbs. each S7220SB-B* Medium 6, 8, 10 or 12mm Square Stainless Steel 316 #4 Satin 0.83 lbs. each S7330SB-B* Large 8, 10 or 12mm Square Stainless Steel 304 #4 Satin 1.11 lbs. each * Optional security pin included Gaskets to Fit Glass Size All glass clips are supplied with multiple gasket sets that can be used in combination to suit varying glass thickness options and ensure a proper fit. Optional Security Pin Medium and large glass clips are supplied with nylon pins for added safety. 28 geobezdan.com 1 800 663 6356 04/17
BALUSTER RAILING GLASS CLIPS Square Glass Clip for Round Post S: 1-1/16" M: 1-1/8" L: 1-5/16" S: 1-3/4" M: 2" L: 2-5/32" S: 5/8" M: 5/8" L: 5/8" S: 1-7/16" M: 2-3/16" L: 2-7/16" T w Supplied with multiple gasket sets that can be used in combination to suit varying glass thickness options w Medium and large glass clips are supplied with optional nylon security pins for added safety w 316 indoor/outdoor use w Suggested fasteners: Small clips to post: #8 fastener (supplied by others) Medium and large clips to post: QS-127 part# 94.0680.820.14 Part # Clip Size Glass Size (T) Fits Tubing Material Alloy Finish Weight S7110RB-B Small 6, 8 or 10mm ø 2" Stainless Steel 316 #4 Satin 0.59 lbs. each S7227RB-B* Medium 8, 10 or 12mm ø 1-1/2" Stainless Steel 304 #4 Satin 0.70 lbs. each S7225RB-B* Medium 8, 10 or 12mm ø 2" Stainless Steel 316 #4 Satin 0.77 lbs. each S7335RB-B* Large 8, 10 or 12mm ø 2" Stainless Steel 304 #4 Satin 1.03 lbs. each S7340RB-B* Large 8, 10 or 12mm ø 2" Stainless Steel 316 #4 Satin 1.03 lbs. each * Optional security pin included Round Tube Use stainless steel round tube with medium glass clips for ø 1-1/2 tubing to create custom glass railings. u Round Tube Bezdan Stainless page 20 Important: Installing on Wood Consult an engineer for recommended reinforcement if mounting glass clips to wood. 04/17 geobezdan.com 1 800 663 6356 29
BALUSTER RAILING GLASS CLIPS Square Glass Clip for Square Post S: 1-1/16" M: 1-1/8" L: 1-5/16" S: 1-3/4" M: 2" L: 2-5/32" S: 5/8" M: 5/8" L: 5/8" S: 1-3/4" M: 2" L: 2-5/32" T w Supplied with multiple gasket sets that can be used in combination to suit varying glass thickness options w Medium and large glass clips are supplied with optional nylon security pins for added safety w 316 indoor/outdoor use w Suggested fasteners: Small clips to post: #8 fastener (supplied by others) Medium and large clips to post: QS-127 part# 94.0680.820.14 Part # Clip Size Glass Size (T) Fits Tubing Material Alloy Finish Weight S7110SB-B Small 6, 8 or 10mm Square Stainless Steel 316 #4 Satin 0.19 lbs. each S7225SB-B* Medium 8, 10 or 12mm Square Stainless Steel 316 #4 Satin 0.77 lbs. each S7335SB-B* Large 8, 10 or 12mm Square Stainless Steel 304 #4 Satin 1.03 lbs. each S7340SB-B* Large 8, 10 or 12mm Square Stainless Steel 316 #4 Satin 1.03 lbs. each * Optional security pin included Gaskets to Fit Glass Size All glass clips are supplied with multiple gasket sets that can be used in combination to suit varying glass thickness options and ensure a proper fit. Optional Security Pin Medium and large glass clips are supplied with nylon pins for added safety. 30 geobezdan.com 1 800 663 6356 04/17
BALUSTER RAILING GLASS CLIPS 1-3/8" 2-5/32" 11/16" 2-5/32" T New Square Glass Clip for Square Post w Glass clips have a slightly tapered edge for a sleek, modern look w Supplied with multiple gasket sets that can be used in combination to suit varying glass thickness options w Supplied with optional security plate for posts that are fascia mounted; no pre-drilling required w 316 indoor/outdoor use w Suggested fasteners: Large clips to post: QS-127 part# 94.0680.820.14 Part # Clip Size Glass Size (T) Fits Tubing Material Alloy Finish Weight S7350SB-B* Large 8, 10 or 12mm Square Stainless Steel 304 #4 Satin 0.968 lbs. each S7355SB-B* Large 8, 10 or 12mm Square Stainless Steel 316 #4 Satin 0.968 lbs. each *Optional security plate included 1-9/16" 2-3/4" 11/16" 2-5/32" T New Rectangular Glass Clip for Square Post w Glass clips have a slightly tapered edge for a sleek, modern look w Supplied with multiple gasket sets that can be used in combination to suit varying glass thickness options w Supplied with optional security plate for posts that are fascia mounted; no pre-drilling required w 316 indoor/outdoor use w Suggested fasteners: Large clips to post: QS-127 part# 94.0680.820.14 Part # Clip Size Glass Size (T) Fits Tubing Material Alloy Finish Weight S7360SB-B* Large 12mm mono. / 13, 15 or 17mm lam. Square Stainless Steel 304 #4 Satin 1.248 lbs. each S7365SB-B* Large 12mm mono. / 13, 15 or 17mm lam. Square Stainless Steel 316 #4 Satin 1.248 lbs. each *Optional security plate included 04/17 geobezdan.com 1 800 663 6356 31
BALUSTER RAILING GLASS CLIPS Round Glass Clip for Round Post, Zinc 1-1/8" 5/8" 2-5/8" T w Supplied with multiple gasket sets that can be used in combination to suit varying glass thickness options w Supplied with optional nylon security pin for added safety w Zinc indoor use 1-3/4" w Suggested fasteners Medium clips to post: QS-127 part# 94.0680.820.14 Part # Clip Size Glass Size (T) Fits Tubing Material Finish Weight Z6105RB-SN* Medium 6, 8 or 10mm ø 2" Zinc Satin Nickel 0.62 lbs. each * Optional security pin included Round Glass Clip for Square Post, Zinc 1-1/8" 5/8" 2-1/2" T w Supplied with multiple gasket sets that can be used in combination to suit varying glass thickness options w Supplied with optional nylon security pin for added safety w Zinc indoor use 1-3/4 w Suggested fasteners: Medium clips to post: QS-127 part# 94.0680.820.14 Part # Clip Size Glass Size (T) Fits Tubing Material Finish Weight Z6105SB-SN* Medium 6, 8 or 10mm Square Zinc Satin Nickel 0.62 lbs. each * Optional security pin included Zinc Advantage u Cost effective alternative to stainless steel u Satin nickel finish complements stainless steel components u Suitable for painting or powder coating 32 geobezdan.com 1 800 663 6356 04/17
BALUSTER RAILING GLASS CLIPS Square Glass Clip for Round Post, Zinc 1-1/16" 1-15/16" T w Supplied with multiple gasket sets that can be used in combination to suit varying glass thickness options 5/8" w Zinc indoor use 1-3/4" w Suggested fasteners: Small clips to post: #8 fastener (supplied by others) Part # Clip Size Glass Size (T) Fits Tubing Material Finish Weight Z6110RB-SN Small 6, 8 or 10mm ø 1-1/2" Zinc Satin Nickel 0.40 lbs. each Square Glass Clip for Round Post, Zinc 1-3/8" 5/8" 2-9/16" T w Glass clips have a slightly tapered edge for a sleek, modern look w Supplied with multiple gasket sets that can be used in combination to suit varying glass thickness options w Supplied with optional nylon security pin for added safety 2-5/32" w Zinc indoor use w Suggested fasteners: Large clips to post: QS-127 part# 94.0680.820.14 Part # Clip Size Glass Size (T) Fits Tubing Material Finish Weight Z6335RB-SN* Large 8, 10 or 12mm ø 1-1/2" Zinc Satin Nickel 0.70 lbs. each * Optional security pin included Important: Installing on Wood Consult an engineer for recommended reinforcement if mounting glass clips to wood. 04/17 geobezdan.com 1 800 663 6356 33
BALUSTER RAILING GLASS CLIPS Square Glass Clip for Square Post, Zinc 1-1/16" 1-3/4" T w Supplied with multiple gasket sets that can be used in combination to suit varying glass thickness options 11/16" w Zinc indoor use 1-3/4" w Suggested fasteners: Small clips to post: #8 fastener (supplied by others) Part # Clip Size Glass Size (T) Fits Tubing Material Finish Weight Z6110SB-SN Small 6, 8 or 10mm Square Zinc Satin Nickel 0.40 lbs. each Square Glass Clip for Square Post, Zinc 1-3/8" 11/16" 2-5/32" T w Glass clips have a slightly tapered edge for a sleek, modern look w Supplied with multiple gasket sets that can be used in combination to suit varying glass thickness options w Supplied with optional nylon security pin for added safety 2-5/32" w Zinc indoor use w Suggested fasteners: Large clips to post: QS-127 part# 94.0680.820.14 Part # Clip Size Glass Size (T) Fits Tubing Material Finish Weight Z6335SB-SN* Large 8, 10 or 12mm Square Zinc Satin Nickel 0.70 lbs. each * Optional security pin included Important: Glass Size Glass clips are designed to work with a minimum and maximum glass size (thickness). The glass size upper limit cannot be exceeded as it will affect the integrity of the glass clip. 34 geobezdan.com 1 800 663 6356 04/17
BALUSTER RAILING CABLE RAILING INFILL Cable Railing Infill by Ultra-Tec Combine elegant, smooth round form posts with the industrial flare of cable to create a sleek and contemporary railing. Stainless steel cable railing infill by Ultra-tec keeps views clear with fittings that are hidden and tamper proof. Cable railing installs with do-it-yourself ease and is ideal for stairs, balconies, and decks. Ultra-tec fittings are available in complete kit assemblies. u 1/8 stainless steel cable, ideal for residential projects u Cable can be installed by hand, no special equipment required u Exclusively test approved with Bezdan Stainless posts and tubes u See Ultra-tec, Kits for Metal Posts, 212 Series for level and 232 Series for angled applications in the Cable Railing tab 04/17 geobezdan.com 1 800 663 6356 35
BALUSTER RAILING SOLAR ACCENT LIGHTING New Solar Accent Lighting 3-3/4" 1-5/8" 9" ø 1/4" w Suits metal and wood posts w Produces six lumens of light for up to 10 hours w Supplied with solar rechargeable AAA NiMH battery w Supplied with fasteners for wood and metal posts w 316 indoor/outdoor use 1-1/2" w Mounting kit for metal posts 1-1/2" INSTALLATION w For wood: Pre-drill a 1/8 hole prior to fastening unit with a wood screw w For metal: Pre-drill and tap with N18 drill bit, 10-32 tap prior to fastening unit with a metal screw Part # Material Alloy Finish Weight 9995 Stainless Steel 316 #4 Satin 1.061 lbs. each New Mounting Kit for Metal Posts w Kit includes N18 drill bit, 10-32 cutting tap Part # Material Weight 9955 HSS 6542 0.456 lbs. each FIGURE 9: Installed Solar Accent Light
Accessories for Metal & Glass Railings EASY INSTALLATION. AMAZING RESULTS. Projects can be completed with fasteners, sealants and tools for easy installation of glass railings. Cleaning products are also available to protect and maintain stainless steel components. Accessories Find everything you need to install, clean and maintain metal and glass railings: u Fasteners u Glues & Sealants u Tools u Cleaning Products 04/17 geobezdan.com 1 800 663 6356 37
n Metal & Glass Railing Accessories ACCESSORIES FASTENERS Wood Screw ø 0.19 w Flat top, countersunk head w Suits Phillips driver 1" w 316 outdoor use Part # Q-Name Material Alloy Box Lot Weight 93.0220.525.13 QS-5 Stainless Steel 304 50 1.10 lbs./box 93.0220.525.14 QS-6 Stainless Steel 316 50 1.50 lbs./box Concrete Screw ø 3/8" 4" w Flat top, countersunk head w Suits Torx driver w Steel zinc-plated for indoor use Part # Q-Name Material Box Lot Weight 19.4311.384.15 QS-197 Steel Zinc-Plated 50 7.64 lbs./box Anchor Bolt M8 2-61/64" w Concrete wedge anchor w Steel zinc-plated indoor use w 316 outdoor use Part # Q-Name Material Alloy Box Lot Weight 19.4108.121.15 QS-246 Steel Zinc-Plated 10 0.73 lbs./box 19.4108.121.14 QS-247 Stainless Steel 316 10 0.73 lbs./box Anchor M10 3-11/32" w Chemical adhesive anchor w Steel zinc-plated indoor use Part # Q-Name Material Box Lot Weight 19.4010.110.15 QS-229 Steel Zinc-Plated 10 1.48 lbs./box 38 geobezdan.com 1 800 663 6356 04/17
n Metal & Glass Railing Accessories ACCESSORIES FASTENERS Anchor M12 4-23/32" w Chemical adhesive anchor w Steel zinc-plated indoor use w 316 outdoor use Part # Q-Name Material Alloy Box Lot Weight 19.4012.125.15 QS-232 Steel Zinc-Plated 10 1.52 lbs./box u 19.4012.125.14 QS-233 Stainless Steel 316 10 1.52 lbs./box u Products are available on special order. Contact your Sales Representative for more information. Anchor M12 6-11/16" w Chemical adhesive anchor w 316 indoor/outdoor use Part # Q-Name Material Alloy Box Lot Weight 19.4012.225.14 QS-239 Stainless Steel 316 10 4.26 lbs./box Anchor w Chemical adhesive anchor 3-5/16" w Steel zinc-plated indoor use w 316 outdoor use M10 Part # Q-Name Material Alloy Box Lot Weight 19.4510.123.15 QS-242 Steel Zinc-Plated 10 1.52 lbs./box 19.4510.123.14 QS-243 Stainless Steel 316 10 1.52 lbs./box 04/17 geobezdan.com 1 800 663 6356 39
n Metal & Glass Railing Accessories ACCESSORIES FASTENERS Anchor M8 w Sleeve Anchor w Flat top, countersunk head w Suits Hex or Allen tool 4-59/64" w 316 indoor/outdoor use Part # Q-Name Material Alloy Box Lot Weight 19.4212.150.14 QS-519 Stainless Steel 316 25 4.67 lbs./box Anchor M12 w Chemical adhesive anchor w 316 indoor/outdoor use 5-5/16" Part # Q-Name Material Alloy Box Lot Weight 19.4012.140.14 QS-549 Stainless Steel 316 10 2.30 lbs./box Inside Thread Anchor Bolt M12 3.7 0.08 0.79 0.51 M12 w Three-part anchor w Chemical adhesive anchor w 316 indoor/outdoor use 1.38 Part # Q-Name Material Alloy Box Lot Weight 19.4512.127.14 QS-559 Stainless Steel 316 10 4.00 lbs./box 40 geobezdan.com 1 800 663 6356 04/17
3-1/2" n Metal & Glass Railing Accessories ACCESSORIES FASTENERS Lag w Hanger bolt w 316 indoor/outdoor use M8 x 1-2/8" Part # Q-Name Material Alloy Box Lot Weight 95.0100.890.140 QS-86 Stainless Steel 316 10 0.50 lbs./box 95.0100.890.14 QS-86 Stainless Steel 316 50 2.31 lbs./box Machine Screw 3/16" 5/8" 3/8" w Button head w Suits Hex or Allen tool w 316 indoor/outdoor use Part # Q-Name Material Alloy Box Lot Weight 94.0511.516.14 QS-111 Stainless Steel 316 50 0.33 lbs./box Machine Screw M10 w Flat top, countersunk head w Suits Hex or Allen tool 1-3/16" w 316 outdoor use Part # Q-Name Material Alloy Box Lot Weight 95.0671.030.13 QS-532 Stainless Steel 304 50 2.76 lbs./box 95.0671.030.14 QS-533 Stainless Steel 316 50 2.76 lbs./box 04/17 geobezdan.com 1 800 663 6356 41
n Metal & Glass Railing Accessories ACCESSORIES FASTENERS Machine Screw 3/16" w Flat top, countersunk head w Suits Hex or Allen tool 3/8" w 316 indoor/outdoor use 3/4" Part # Q-Name Material Alloy Box Lot Weight 94.0670.520.14 QS-113 Stainless Steel 316 50 0.44 lbs./box Machine Screw 5/16" w Flat top, countersunk head w Suits Hex or Allen tool 5/8" w 316 indoor/outdoor use 1-1/2" Part # Q-Name Material Alloy Box Lot Weight 94.0670.840.14 QS-122 Stainless Steel 316 50 1.54 lbs./box Hexagon Socket Head Machine Screw 1/4" w Socket cap head w Suits Hex or Allen tool 1-3/4" 1/4 1/2" w 316 outdoor use Part # Q-Name Material Alloy Box Lot Weight 94.0680.645.13 QS-154 Stainless Steel 304 50 0.77 lbs./box 94.0680.645.14 QS-170 Stainless Steel 316 50 1.00 lbs./box 42 geobezdan.com 1 800 663 6356 04/17
n Metal & Glass Railing Accessories ACCESSORIES FASTENERS Hexagon Socket Head Machine Screw 5/16" 3/4" 5/16" w Socket cap head w Suits Hex or Allen tool w 316 indoor/outdoor use 1/4" 15/32" Part # Q-Name Material Alloy Box Lot Weight 94.0680.820.140 QS-127 Stainless Steel 316 12 0.32 lbs./box 94.0680.820.14 QS-127 Stainless Steel 316 50 1.32 lbs./box Hexagon Socket Head Machine Screw w Socket cap head w Suits Hex or Allen tool 2-1/4" 1/4 1/2" w 316 outdoor use Part # Q-Name Material Alloy Box Lot Weight 94.0680.660.13 QS-125 Stainless Steel 304 50 1.43 lbs./box 94.0680.660.14 QS-171 Stainless Steel 316 50 1.43 lbs./box 04/17 geobezdan.com 1 800 663 6356 43
n Metal & Glass Railing Accessories ACCESSORIES GLUES & SEALANTS New Loctite 680 w High-strength fixative w Provides a shear strength of 4,000 psi w Cures in 10 minutes, will dry full strength in 24 hours w Suitable for temperatures from -54 to 149 C INSTALLATION w Apply a small amount of Loctite 680 evenly around the inside of the post tubing to ensure a strong connection Part # Volume Weight LOCTITE 680 50ml (1.69 fl. oz.) 0.185 lbs. each Q-Glue w High-strength fixative w Each bottle connects (60) ø 1-1/2" tubes or (50) ø 2" tubes INSTALLATION w Score the fitting with a brass brush and activate the Q-glue w Apply glue evenly based on recommended usage and join parts immediately w Q-glue will dry full strength in 3-4 hours. Load tests available upon request w See installation video at bezdanq-railing.com Part # Volume Weight Q-GLUE 50ml (1.69 fl. oz.) 0.17 lbs. each Q-Seal w Glass silicone sealant, black color, for indoor and outdoor use w Supplied with spray nozzle Part # Volume Weight Q-SEAL 311ml (10.5 fl. oz.) 0.85 lbs. each 44 geobezdan.com 1 800 663 6356 04/17
n Metal & Glass Railing Accessories ACCESSORIES TOOLS Multi-Tool 7" 12" w For use with Easy Glass Slim and Max safety wedge system w The hand-held multi-tool can be used three ways: The blade at the head of the tool along with a rubber mallet (not supplied) secures the safety wedge in place The hook at the base of the tool easily removes the safety wedge for glass adjustments The roller at the top of the tool allows for easy installation of the inner gasket Part # Q-Name Weight 19.6920.000.00 Q-71 1.33 lbs. each Mounting Plates w For use with Easy Glass Slim and Max base shoes w Create perfectly even surfaces with convenient variable thickness shims for maximum flexibility. Short and long lengths of each thickness saves time cutting as compared to strips w Supplied in 1mm, 2mm, 3mm, 4mm and 5mm sizes Part # Q-Name Material Box Lot Weight 19.6921.000.00 Q-62 Polymer 520 Pieces 6.31 lbs. each Glass Fitting Aid 4-1/2" 7-1/2" 7-1/2" w Simplifies glass installation w Sold as set of two w Supplied with allen (hex) keys for installing glass clips INSTALLATION w Position a fitting aid beneath glass infill at each end Part # Weight 19.0715.000.00 1.81 lbs. per pair 04/17 geobezdan.com 1 800 663 6356 45
n Metal & Glass Railing Accessories ACCESSORIES TOOLS Double-Sided Adhesive Tape w For indoor and outadoor use w Use to secure U-Channel in place 3/4" wide Part # Q-Name Length Weight 19.1350.018.00 Q-52 216' 1.10 lbs. each Air Pump 3.5" w For preparing anchor points into concrete surface w Clears drill holes of debris w Supplied with extension tube 16" Part # Q-Name Weight u 19.4095.103.00 Q-97 0.65 lbs. each u Products are available on special order. Contact your Sales Representative for more information. Hexagon Screw Driver 0.55 w A key tool for the adjustable adapter, fascia mount w Easily adjusts glass panels while mounted 11.81 Part # Q-Name Weight 19.0701.014.00 Q-14 0.25 lbs. each 46 geobezdan.com 1 800 663 6356 04/17
n Metal & Glass Railing Accessories ACCESSORIES TOOLS Hexagon Screw Driver Set w Seven piece set includes: Q-2, Q-2.5, Q-3, Q-4, Q-5, Q-6, Q-8 w Fastens most every Q-rail fitting Part # Weight 19.0701.000.00 2.50 lbs. each C-Spanner Wrench L ø w Install and adjust cap for glass adapters, glass handrail brackets and posts for open risers Part # Q-Name Diameter ø Length (L) Weight 19.0702.050.00 Q-32 ø 1-3/4" to 2" 8" 0.35 lbs. each u 19.0702.060.00 Q-33 ø 2-1/4" to 2-1/2" 9-1/2" 0.57 lbs. each 19.0702.070.00 Q-51 ø 2-2/3" to 3" 9-1/2" 0.70 lbs. each u Products are available on special order. Contact your Sales Representative for more information. Cutting Wheel w Cut faster, freer and cooler, with less power than standard thin cut-off wheels w Heavily reinforced for extra safety yet flexible and resilient to resist twisting and bending w Gives a true and straight cut every time Part # CUTTING WHEEL Weight 0.07 lbs. each 04/17 geobezdan.com 1 800 663 6356 47
n Metal & Glass Railing Accessories ACCESSORIES TOOLS Flowdrill Overview Thermal friction drilling and thread forming Flowdrill thermal friction drilling is a cost effective solution for joining tubing and other thin-walled profiles without the use of expensive fasteners. Flowdrill is a chipless process that locally displaces metal to form bushings up to three times the original material thickness. These bushings significantly increase the number of threads possible, resulting in a stronger fastening connection. Reliable and Cost-Reducing Technology Flowdrill may be used with drill presses, milling and CNC machines so no additional investment or storage is required. The Flowdrill solid carbide tungsten tool provides extra-long lifetime use and is capable of accurately drilling up to 5,000 holes in stainless steel. Flowdrill saves time with fewer operating steps and also eliminates the added cost of inserts, rivets, welded braces or nuts. Capabilities and Advantages u Creates strong threaded connections u Produces accurate holes u Drills through 1-10mm material thickness u Bits can drill up to 5,000 holes in stainless and up to 10,000 holes in mild steel u Compatible with drill presses, milling and CNC machines Productivity and Profitability u Eliminates expensive fasteners u Fewer operating steps u No waste and removal costs u Prolonged lifetime use u No additional investment in materials, equipment and storage costs Flowdrill Two-step Technology Flowdrilling Watch the Flowdrill instructional video at geobezdan.com or visit our YouTube channel. Flowtapping Step 1: Flowdrilling u Heat is generated from the high axial pressure and rotational speed of the Flowdrill u The metal surface becomes soft and malleable enough to be perforated and formed u The displaced material forms a bushing below the surface of the metal Step 2: Flowtapping u Flowtap creates formed threads by material displacement u The material flows into the thread depression and crest of the tap u Can achieve an overall bushing length of approximately three times the original wall thickness 48 geobezdan.com 1 800 663 6356 04/17
n Metal & Glass Railing Accessories ACCESSORIES TOOLS Flowdrill Starter Set w Set includes everything you need to work with stainless steel railing systems: ➊ Special tool holder with cooler disc ➋ Hook spanner and wrench* ➌ Collet ➍ Two Flowdrill, flat bits** ➎ Two Flowtap thread formers** ➏ Lubricant for Flowdrill, 100g ➐ Brass brush, heat resistant for applying lubricant ➑ Thread forming oil for Flowtap, 100ml ➒ Bristle brush for applying thread forming oil ➓ Carrier for the Flowdrill System * Set comes with both a hook spanner and wrench for drill presses or hook spanner only for milling and CNC machines. **The Flowdrill and Flowtap bits are for 5/16-18 UNC coarse thread only. Other sizes are available on special order. Part # Description Weight FD STARTER Starter Set 5.50 lbs. each FD072SM ** Replacement Flowdrill, flat bit 0.05 lbs. each 5/16-18UNC ** Replacement Flowtap thread former 0.05 lbs. each ** The Flowdrill and Flowtap bits are for 5/16-18 UNC coarse thread only. Other sizes are available on special order. Eliminate expensive fasteners Flowdrill replaces the need for inserts, rivets, welded braces or nuts. 04/17 geobezdan.com 1 800 663 6356 49
n Metal & Glass Railing Accessories ACCESSORIES TOOLS Flow2Go Mobile Drilling System w A mobile drill rig system for use with Flowdrill w Suits a maximum recommended material thickness of 2.5mm (0.098 ) w System Includes: High precision drill rig for extreme loads Hand drill (1020 W/2,600 rpm) Vice (100 x 100mm clamping width) w Accessories Case Includes: One each Flowdrill, M6 and M8* One each Flowtap, M6 and M8* Tool holder including collet ø 6mm and 8mm Thread forming oil (FT-MZ) T-slot spanner Assembly tools (box end wrenches) * Order a combination of two standard bits and two taps up to M8 or 5/16. Please note that flat bits and taps will incur an additional charge. Part # Description Weight u FLOW2GO Drilling System with Accessories Case 35.0 lbs. each u Products are available on special order. Contact your Sales Representative for more information. 50 geobezdan.com 1 800 663 6356 04/17
n Metal & Glass Railing Accessories ACCESSORIES CLEANING PRODUCTS Q-Ultra-Clean w Stainless steel cleaner removes contaminations, traces of oil and grease as well as thin layers of rust w Rebuilds and strengthens passive layer of the stainless steel INSTALLATION w Evenly spray a thin film on stainless steel immediately after installation w Wash away with clean cold water after 15-20 minutes w No scrubbing necessary Part # Volume Weight Q-ULTRA-CLEAN 500ml (16.9 fl. oz.) 1.68 lbs. each Q-Cleaner w Stainless steel cleaning and protective spray w Removes thin layers of rust, oil, grease, fingerprints, permanent marker and adhesives from label and tape w Cleans large surfaces without leaving marks and makes treated surfaces look new w Leaves a protective dirt repellent barrier on the metal Part # Volume Weight Q-CLEANER 299ml (10.1 fl. oz.) 0.85 lbs. each Scotch Brite Pads w Abrasive cleaning pads used for cleaning, finishing and polishing w 10 pads per package INSTALLATION w Safety goggles and gloves, earmuffs and respiratory protection should be worn when using this abrasive product Precautions should be taken when using this abrasive product. Part # Weight 19.0640.000.00 0.05 lbs. each 04/17 geobezdan.com 1 800 663 6356 51