dam Technologies, Inc. INTRODUTION: dam Tech P Dual Series Port D-Sub Flexible onnectors Printed ircuit provide (FP) the and means Flexible to increase Flat able I/O (FF) without connectors utilizing are added a LIF P (low board insertion space. force) They design are available that provides with a three low cost, stacked fast, heights, easy and four reliable mounting connection and grounding of flexible options printed and circuits a variety to a P. of size dam and gender Tech s combinations. special contact Our design conforms preserves conductor all applicable integrity requirements while producing of a MIL--24308 stable, high pressure D, ISO 2110, connection. I standards This series RS232, includes RS442, single RS449 and dual and row I versions 48--106 in standards. 2.54mm, 1.25mm, Our low 1.00mm profile metal & 0.50mm shell provides centerlines long-term with vertical cycle life or and horizontal MI/SD orientations. reductions which meet F Part 15, Subpart J emission limits. FTURS:? Superior Maximizes contact available design board protects space conductors? High Three pressure height contacts options, custom designs welcome? Single Four or board dual mounting row versions and grounding options? hoice utomated of 2.54mm, assembly 1.25mm, for consistent 1.00mm & quality 0.50mm and centerlines lower cost MTING OPTIONS: Mates MTING with FP dam & FF Tech L: D-Sub Series: DPD, DSD, DPF, DSF and all industry Mates with standard flat flexible D-Subminiature cable and connectors flexible printed circuits with SPIFITIONS: thickness of 0.3mm Material: Specifications: Shell: Steel, tin-plated Insulator: Material: Polybutylene Terephthalate (PT), glass reinforced Standard thermoplastic, insulator: PT, rated Glass UL reinforced, 94V-O rated UL94V-0 Insulator Optional Hi-Temp color: lack insulator: Nylon 6T, rated UL94V-0 ontacts: Insulator color: Plug - lack rass; Socket - Phosphor ronze Grounding ontacts: Phosphor bracket: Steel, ronze nickel-plated Rivet ontact insert: Plating: rass, nickel-plated Plating: Tin over copper underplate 5 lectrical: µin gold nom. (optional 30 µin) to MIL-G-45204, Type II, Grade on Operating contact voltage: area over 100V 50 µin nickel max. underplate to QQ-N-290, lass 2, Grade urrent, rating: gold flash " on solder Spacing: tails0.5 mp max. lectrical:.049" Spacing: 1 mp max Operation voltage:.100" 600 VD Spacing: max3 mps max urrent ontact rating: resistance: 5 mps 30 mω maxmax. initial ontact Insulation resistance: resistance: 20500 mω MΩ max min. Insulation Dielectric withstanding resistance: 5000 voltage: MΩ 500V min @ 1000 for 1 VD minute between adjacent contacts Mechanical: (75 F and 55% R.H.) Dielectric Insertion Force: withstanding 5 oz max voltage: 1000 V rms (sea level) apacitance: Withdrawal Force: 2 pf 3 max oz min between adjacent contacts Mechanical: Temperature Rating: Insertion Operating force: temperature: 10 ozs. max -40 with to +85.041" dia. pin Withdrawal Soldering process force: 7.1 temperature: ozs. min with " dia. pin nvironmental: Standard insulator: 235 Operating Hi-Temp temperature: insulator: 260-65 to +125 SSORIS: PKGING: Dustcovers, hardware. Page 69 nti-sd plastic tubes or trays PKGING: nti-static plastic trays PPROVLS ND RTIFITIONS: PPROVLS UL Recognized ND & S RTIFITIONS: ertified, File no. 224053 Recognized under the component program of Underwriters Laboratories, Inc. No. 2240533 ertified by anadian Standards ssociation Pb RoHS OMPLINT US 2002 / 95 / lif flex iruit onnetor 2.54mm [.100"] enterline 1.25mm [.049"] enterline 1.00mm ["] enterline HI-TMP INSULTOR V I L L P SRIS INDITOR P = LIF Flex ircuit onnector 0.50mm ["] enterline Pb SerieS ORDRING INFORMTION TYP =.100 centerline in-line footprint =.049 centerline staggered footprint = " centerline staggered footprint D = " centerline inline footprint = " centerline horizontal SMT POSITIONS 02 thru 21 ROW SPING lank = Single Row 20 = 2.00mm P Row Spacing (Type ) 25 = 2.5mm P Row Spacing (Type ) SMT = Surface Mount (Type, ) NTRY NGL T = Top entry S = Side entry S = Reverse side entry (.100" centerline only) OPTIONS dd designator(s) to end of part number HT= Hi-Temp insulator for Hi-Temp soldering processes up to 260 http://www.dti.com/dm-th 909 Rahway venue Union, New Jersey 07083 T: 908-687-5000 F: 908-687-5710 WWW.DM-TH.OM 195 10 T 20
dam Technologies, Inc. lif flex iruit onnetor 1.00mm ["] enterline Pb SerieS pb- 1.00 TOP (") NTRY " TOP SMT NTRY SMT pb- 1.00 SID (") NTRY " SID SMT NTRY SMT P--09-T-SMT = X No. of Spaces = +.090 [2.30] = +.157 [4.00] P--18-S-SMT = X No. of Spaces = +.090 [2.30] = +.157 [4.00].110 [2.80].220 [5.60].110 [2.80].142 [3.60].295 [7.50].023 X.090] [0.60 X 2.30].181 [4.60].023 X.090] [0.60 X 2.30].010 [0.25] Recommended P Layout TOP NTRY " THRU-HOL pb- 1.00 (") TOP NTRY THRU HOL Recommended P Layout pb- SID NTRY " THRU-HOL 1.00 (") SID NTRY THRU HOL P--18-T-20 = X No. of Spaces = +.090 [2.30] = +.157 [4.00].118 [3.00] P--12-S-20 = X No. of Spaces = +.090 [2.30] = +.157 [4.00].102 [2.60].102 [2.60].118 [3.00] ø.028 [0.70] Recommended P ROMNDD Layout P LYOUT ROMNDD LYOUT Recommended P Layout ø.028 [0.70] 196 http://www.dti.com/dm-th 909 Rahway venue Union, New Jersey 07083 T: 908-687-5000 F: 908-687-5710 WWW.DM-TH.OM
dam Technologies, Inc. lif flex iruit onnetor 1.25mm [.049"] &.100 [2.54] enterline Pb SerieS TOP NTRY.049" THRU-HOL pb-b 1.25 (.049") TOP NTRY THRU HOL pb-b SID NTRY.049" THRU-HOL 1.25(.049") SID NTRY THRU HOL [5.0] P--18-T-25 D [5.0] P--12-S-25.138 [3.5].315 [8.00].315 [8.00].256 [6.5] [.50].049 [1.25].110 [2.80] [.50].049 [1.25] =.049 [1.25] X No. of Spaces = + = + [5.00] TOP NTRY.100" pb-a INLIN THRU-HOL.100"(2.54) TOP NTRY INLIN THRU HOL.089 ROMNDD P LYOUT Recommended P Layout =.049 [1.25] X No. of Spaces [2.050] = + = + [5.00] Recommended P Layout pb-a INLIN THRU-HOL.100"(2.54) SID NTRY INLIN THRU HOL P--10-T P--13-S.177 [4.50].177 [4.50] [.52].100 [2.54].130 [3.30].265 [6.73].118 [3.00].265 [6.73] [.52].100 [2.54] =.100 [2.54] x no. of Spaces = +.232 [5.90] = +.315 [8.00] ROMNDD P LYOUT Recommended P Layout ø.030 [0.85] =.100 [2.54] x no. of Spaces ø.030 = +.232 [5.90] [0.85] ROMNDD P LYOUT = +.315 [8.00] Recommended P Layout http://www.dti.com/dm-th 909 Rahway venue Union, New Jersey 07083 T: 908-687-5000 F: 908-687-5710 WWW.DM-TH.OM 197
dam Technologies, Inc. INTRODUTION: dam Tech P Series Flexible Printed ircuit (FP) and Flexible Flat able (FF) connectors are ZIF (zero insertion force) connectors designed to provide a fast, easy, reliable method to make a connection of flexible printed circuits to a P. dam Tech s special contact design completely preserves conductor integrity by eliminating all wiping action while making connection. Flex circuitry enters the connector and the connector cap is pressed down to capture the flex circuit producing a stable, high pressure connection. Raising the cap releases the pressure for exchange or replacement of circuitry. This series includes single and dual row versions in thru-hole or SMT mounting in vertical or horizontal orientations. FTURS: Superior contact design protects conductors High pressure contacts Single or dual row versions hoice of.3mm,.5mm,.8mm, 1mm & 1.25mm centerlines MTING FP & FF: Mates with.3mm,.5mm,.8mm, 1mm & 1.25mm centerline flat flexible circuits with thickness range of 0.1mm to 0.3mm Zif flex iruit onnetor 0.3mm [.012"] enterline 0.5mm ["] enterline 0.8mm [.031"] enterline 1.0mm ["] enterline 1.25mm [.049"] enterline P SerieS SPIFITIONS: Material: Hi-Temp Insulator: LP, Glass reinforced, rated UL94V-0 Insulator color: Natural ontacts: Phosphor ronze ontact Plating: Tin over copper underplate overall lectrical: Operating voltage: 100V max. urrent rating: " Spacing: 0.4 mps max..031" & " Spacing: 0.5 mps max.049" Spacing: 1 mp max ontact resistance: 30 mω max. initial Insulation resistance: 500 MΩ min. Dielectric withstanding voltage: 500V for 1 minute Mechanical: Insertion Force: 0 oz max Withdrawal Force: 13 oz min Temperature Rating: Operating temperature: -40 to +85 Soldering process temperature: 260 PKGING: nti-sd plastic tubes or Tape and Reel PPROVLS ND RTIFITIONS: UL Recognized & S ertified, File no. 224053 P 1 10 V SRIS INDITOR P = ZIF Flex ircuit onnector ORDRING INFORMTION POSITIONS 03 thru 30 TYP 1 = 1.25mm centerline thru-hole 2 = 1.00mm centerline SMT (body height 2.70mm) 2 = 1.00mm centerline SMT (body height 1.2mm) 3 = 1.00mm centerline thru-hole 4 = 1.25mm centerline SMT 5 =.8mm centerline SMT 6 =.5mm centerline SMT (body height 2.0mm) 6 =.5mm centerline SMT (body height 1.5mm) 6 =.5mm centerline SMT (body height 1.2mm) 6 =.5mm centerline SMT (body height 1.0mm) 7 =.3mm centerline SMT NTRY NGL V = Top entry HL = Side entry, lower contact HU = Side entry, upper contact 3 20 P ROW SPING 20 = 2.0mm Leave blank for SMT FLX IRUIT THIKNSS 3 = 0.1mm 0.3mm (standard for all types) US Pb RoHS OMPLINT 2002 / 95 / HI-TMP INSULTOR V I L L OPTIONS: dd designator(s) to end of part number TR = Tape and reel packaging 198 http://www.dti.com/dm-th 909 Rahway venue Union, New Jersey 07083 T: 908-687-5000 F: 908-687-5710 WWW.DM-TH.OM
dam Technologies, Inc. ONTT STION VIWS Zif flex iruit onnetor 0.5mm ["] enterline P SerieS pa-6.5mm (") SID NTRY SMT P-6-16-HU-3.023 [0.60].012 [0.30] P ORD UPPR ONTT pa-7.3mm (.012") SID NTRY SMT FP WIDTH P ORD LOWR ONTT.136 [3.45] P ORD VRTIL MOUNT P-7-18-HL-3 =.012 [0.30] x No. of Spaces = -.024 [0.60] D = +.051 [1.30] = +.025 [0.63] = +.071 [1.80] 135.073 [1.85].051 [1.30] = X No. of Spaces = +.045 [1.14] = +.189 [6.60].102 [2.60].260 [6.60] [2.0] D SHOWN WITH LTH OPN.150 [3.80] Recommended P Layout pa-6 TOP NTRY " SMT.5mm (") TOP NTRY SMT pa-5 SID NTRY.031" SMT.8mm (.031") SID NTRY SMT P-6-18-V-3.137 [3.48] P-5-24-HU-3.067 [1.70] = X No. of Spaces = +.045 [1.14] = +.189 [6.60].076 [1.95] =.031 [0.80] X No. of Spaces = +.081 [2.05] = +.228 [5.80].008 [0.20].154 [3.90].126 [3.20].012 X.059 [0.30 X 1.50].224.169 [5.70] [4.30].059 [1.50].031 [0.80].012 [0.30].275 [7.00].138 [3.50] X.126 [2.00 X 3.20].110 [2.80] X.091 [2.50 X 2.30] ROMNDD.047 P LYOUT.031 [0.80] [1.20].086 [2.20] Recommended P Layout Recommended P Layout http://www.dti.com/dm-th 909 Rahway venue Union, New Jersey 07083 T: 908-687-5000 F: 908-687-5710 WWW.DM-TH.OM 199
dam Technologies, Inc. pa-2 1.00mm (") SID NTRY SMT Zif flex iruit onnetor 1.0mm ["] & 1.25mm [.049"] enterline P SerieS pa-2 1.00mm (") TOP NTRY SMT = X No. of Spaces = +.090 [2.30] = +.280 [7.10].114 [2.90].106 [2.70] P-2-10-HU-3 lso vailable in 1.2mm & 1.5mm ody heights.138 [3.50] P-2-18-V-3 = X No. of Spaces = +.090 [2.30] = +.280 [7.10].012 [.30].063 [1.60].295 [7.50].06 [1.50].181 [4.60].086 [2.20].142 [3.60].024 [0.60].024 [0.60].086 [2.20] Recommended P Layout.177 [4.50].118 [3.00] Recommended P Layout pa-1 1.25mm (.049") TOP NTRY THRU HOL =.049 [1.25] X No. of Spaces = +.106 [2.70] = +.303 [7.70] pa-1 1.25mm (.049") TOP NTRY THRU HOL =.049 [1.25] X No. of Spaces = +.106 [2.70] = +.303 [7.70].394 [10.00].394 [10.00] [5.00] [5.00].090 [2.30].138 [3.50].049 [1.25].090 [2.30] [5.00].138 [3.50].086 [2.20].049 [1.25] P-1-08-V-3-20.096 [2.45] P-1-10-HU-3-50 ø.031 [ø0.80] ø [ ø.031 0.80] [5.00].049 [1.25] Recommended P Layout.049 [1.25] Recommended P Layout 200 http://www.dti.com/dm-th 909 Rahway venue Union, New Jersey 07083 T: 908-687-5000 F: 908-687-5710 WWW.DM-TH.OM